XR650L timing chain snapped | $1500 xr650l rebuild!

  Рет қаралды 11,819

ThaChileanDude

ThaChileanDude

Күн бұрын

Пікірлер: 13
@johnhardwick1736
@johnhardwick1736 4 ай бұрын
Very cool! Just picked up a 2014 xr650l for 850, low compression and oil coming from exhaust, and I'm about to start taking it apart and checking it out
@gertkristensen6451
@gertkristensen6451 3 жыл бұрын
the color on camshaft .. this orginal from new .. noting wrong
@robertweitlauf4653
@robertweitlauf4653 2 жыл бұрын
the discoloration on crank is normal. they heat the crank to assemble it. piston and cylinder look great
@thachileandude
@thachileandude 2 жыл бұрын
I did some research and that’s what I found out so I sent it and built it !
@robertweitlauf4653
@robertweitlauf4653 2 жыл бұрын
@@thachileandude to bad you sold it, i have a 1985 XL600R with 27000. miles it runs great gets 48 mpg. main thing is keep up on maintainence .
@321-Gone
@321-Gone 2 жыл бұрын
good video. what size sockets did you use on the clutch basket and crank/cam chain sprocket bolts? 27mm and 29?
@FIGGY65
@FIGGY65 3 жыл бұрын
Hello GSG, How did the rebuild go? About how many miles were on the engine when the trouble occurred with the prior owner?
@thachileandude
@thachileandude 2 жыл бұрын
15k miles when it blew up. I put around 500 hard miles on it before selling it. I loved my experience with the xr650L. Very fun powerful bike!!
@FIGGY65
@FIGGY65 2 жыл бұрын
@@thachileandude . Thank You for following up with me ! Stay safe !
@joea6296
@joea6296 3 жыл бұрын
Dude watch for head cylinder dowell pins dont lose those lil shits . If you lose them ,may compromise the gaskets .😭
@joea6296
@joea6296 3 жыл бұрын
Lost two pins was unaware because i didnt check my answer book Went to reassemble Rode it one mile it started smoking and spilling oil everywhere . Thought i blew it up Turns out it was those two alignment dowel pins i lost.😭 I found out now that im rebuilding once more no stress though got smarter have to check for every bit of hardware . That bike sounds beast man.
@thachileandude
@thachileandude 3 жыл бұрын
most of the video was filmed in time lapse. what are your questions? i could answer some questions...
@seanboxer1521
@seanboxer1521 3 жыл бұрын
Hi, I’ve got a question on something that was hard to see in the time lapse around 18m33s . . . do you put the 2nd chain guide in before the head goes on? Is it just sticking it in there and poking it around until it feels right? What’s the trick? Thanks 👍
How To Remove / Swap XR650L Camshaft - Honda RFVC cam
10:54
Honda XR650 Rebuild Part 1 - Valve Cover, Head, Cylinder Removal
22:08
when you have plan B 😂
00:11
Andrey Grechka
Рет қаралды 67 МЛН
'23 XR650L Valve adjustment
7:00
XRLand
Рет қаралды 1,3 М.
XR650L In-Depth Review
25:25
Torture Test Magazine
Рет қаралды 669 М.
84 XR500 Timing Chain Tensioner Replacement
5:56
Paul Haines
Рет қаралды 954
XR650L Second and Fifth Gear Mod
14:34
Michael Abramo
Рет қаралды 7 М.
Restoring 1983 Honda XL600R part 1
26:55
bigdmc1
Рет қаралды 57 М.
Honda Xr650l Rebuild Part 3 - Install Head, Cam Shaft, Set Timing
11:20
How To: Valve Adjustment on XR650L/XR600
6:21
ONE_ TerraBike
Рет қаралды 21 М.