Thank you for your purchase of the RowdyRoman Lightburn Camera Mount for the Xtool D1. This video walks you through attaching and setting up your Lightburn Camera Mount. Check out my Etsy Shop www.etsy.com/shop/rowdyroman
Is there a way to add my enclosure back after installing the camera?
@mgervais10 Жыл бұрын
I have xtool enclosure with extensions. Any way to mount camera
@peterromano6905 Жыл бұрын
Sorry not that I am aware of
@veid711 Жыл бұрын
does this work with the light burn 8mp 80 or 120degree cameras? debating on if i should grab an 8 or 5mp camera for my d1 pro
@RowdyRoman Жыл бұрын
No it does not
@Redthumb45 Жыл бұрын
Do you make a model for the Ortur Laser Master 3? I have the 120 deg 5mp camera.
@RowdyRoman Жыл бұрын
Sorry I do not have one yet
@TrevorGreen Жыл бұрын
I bought the enclosure that xtools sells. Not thinking about cameras at the time. Is there a mount/camera system that will work with the enclosure, or maybe I just need to return that and just do a camera and no enclosure?
@RowdyRoman Жыл бұрын
Hey thanks for reaching out. I am not sure if it will or not. But here are the measurements of my mount while on the machine. The measurement from the top of the steel angle to the top of my mount is 344.50 mm. Now if you need the extension for the 120 degree camera you will need to add 105mm.
@TrevorGreen Жыл бұрын
@@RowdyRoman That is about 2 inches too tall to fit in the stock case sold by xtools with no additional risers. So I'm going to have to go with a different case if I want to get that kind of height. I think that might temp solution is to see if I can mount a camera on some pegboard and just pull the xtools cover during calibration and put it back on for burn. Also, I think that I'm going to try configuration with a 4k brio camera, with the understanding that maybe lightburn won't support that. I don't know, didn't look it up. If it doesn't work I'll just use the brio for monitoring / streaming and I'll mount a lightburn camera on the other side.
@51av0sh Жыл бұрын
@@TrevorGreen I'm in the same boat. I contacted Xtools support and they will charge 20% restocking fee plus you have to pay the shipping :(
@tipsey12 жыл бұрын
Will this mount still cover the whole space if the D1 extension set is in use?
@peterromano69052 жыл бұрын
No it will not. With the extension kit you will need to mount a Lightburn camera really high to see the entire work area. I would suggest using the Myers woodshop Lightburn camera mount. It is on his Etsy store
@nogardniwt Жыл бұрын
Any recommendations for camera models?
@peterromano6905 Жыл бұрын
Lightburn 5mp 120, 140, 150, or 160 dregree
@dbrimmage237 Жыл бұрын
Which camera kit is compatible with this mount
@peterromano6905 Жыл бұрын
Lightburn 5mp cameras
@1-Nice-Guy2 жыл бұрын
Very nice! Just got my D1, where can I purchase the Camera Mount and Camera? Thanks!!
@RowdyRoman2 жыл бұрын
here you go www.etsy.com/RowdyRoman/listing/1242813761/xtool-d1-lightburn-camera-mount?Copy&ListingManager&Share&.lmsm&share_time=1655214006583
@1-Nice-Guy2 жыл бұрын
@@RowdyRoman thanks! Any recommendation for a decent camera?
@peterromano69052 жыл бұрын
@@1-Nice-Guy the mount is designed for the Lightburn 5mp 120, 140, 150, or 160 degree camera. There are knock offs on alibaba but it has mixed reviews.
@1-Nice-Guy2 жыл бұрын
@@peterromano6905 I’m a total newbie, do I want a high or low degree camera? No idea what the difference is or advantage?
@peterromano69052 жыл бұрын
@@1-Nice-Guy hey no problem! The degree is the angle of what the lens sees. So if you get the 120 degree camera then the mounting distance will have to be greater. The larger degrees is more like a wide angle lens. Or like a fisheye lens. FYI when purchasing my mount the mount for the 120 degree camera is more because the mount has to be taller. So if you can get the other degrees then you will save some money. Hope that helps
@Gtrlac432 жыл бұрын
Will this work with the D1 Pro?
@peterromano69052 жыл бұрын
Yes it will
@herbertjordan83902 жыл бұрын
Which camera and mount for the x100 d1?
@peterromano69052 жыл бұрын
Do you mean the Xtool D1? I am not familiar with the x100
@herbertjordan83902 жыл бұрын
@@peterromano6905 yes the D1. I see camera going from 120 to 160. Which one do I need. Thanks
@peterromano69052 жыл бұрын
Ahhh. All will work the same. However you can save some money from me if you get the 140, 150, or 160. Because the 120 needs additional height and therefore takes me longer to print. Hope that helps