Connecting the Micro-SD SPI module to the STM32 NUCLEO-F746ZG micro-controller The link to the code: labellechose.ch...
Пікірлер: 36
@miclastname292 Жыл бұрын
I adapted your code for a Seeed Studio SD card Shield (Arduino compatible) on a Nucleo-F446RE, I had to modify for the shield's CS and used SPI1 and UART2. Worked like a charm. PS I had to run the video 1 second at a time to get the code for main as the link does not work.
@netherlabgames75114 жыл бұрын
Thank you so much! This worked instantaneously! I am so grateful you took the time to make this video!
@peterdirnhofer67773 жыл бұрын
Thanks for the tutorial. It works for me with a NUCLEO 32L476RG under stm32l4xx_hal.h. To be compatible to a Arduino Data Logging Shield V1.0, i used SPI1 and PB6 (Arduino D10) for SPI1_CS.
@purposeoflife473 жыл бұрын
Yes ,, same here ,,, i have NUCLEO 32L476RG and it works ,, only one problem that i have 3 sd cards and 1 is working, rest of two are not working. But all three are showing fine on laptop, dont know that is the issue.
@maciejwisniewski13154 ай бұрын
could you please send me your project? I have the same board and can't make it work, idk what is the issue. Card is working with esp32, I did all things from video and after proper initialization i can't open file
@szelenko Жыл бұрын
Дякую за відос! В мене така ж плата і не вийшло отримати дані через uart2. Можливо є у Вас канал солв'їною?
@jeysanjanith3650 Жыл бұрын
Thank you,this code work for stm32f401re
@mohamedkharrat9728 Жыл бұрын
can you give the code because i work with the same board then you and it wouldn't work
@xptodundee4 жыл бұрын
Thanks for the video, so helpful. I do have a question, I did not follow the thought sequence where you say that 2 external files (fatfs_sd) are needed - did you get those from an application example? self developed? I would expect the CubeIDE to create them somewhere? it's the only thing that confuses me still.
@ondrejsakala3980 Жыл бұрын
Thanks a lot, it is a very helpful video.
@woldecosgrove Жыл бұрын
link to the code is not working. could you please update the correct link ? thx
@michaelbertocchi7 ай бұрын
Is possible use this code for stm32g431kb?
@dajianghe Жыл бұрын
Have you tried writing and reading files with large size like 10K?
@NikitaMane-j6z9 ай бұрын
i am use this code but this data display in my serial port not open txt file please help me sir Micro SD card is mounted successfully! File was not opened for reading and checking the free space! The free space is: 253950 The file was not closed. File was not opened for reading! The file was not closed. The Micro SD was not unmounted!
@farukadak_7 ай бұрын
Thanks mate, cheers..
@CosimoDavideViggiano3 жыл бұрын
I'm using a Nucleo F446RE, I did everything You done in the video but my fresult in f_open is always FR_NOT_READY. I don't know why.
@andresfelipe60853 жыл бұрын
Can you solve the problem? i have the same with my blue pin
@gaganjain19292 жыл бұрын
Hey this link can't be open because your website has been closed. Can you please provide me the code?
@netherlabgames75114 жыл бұрын
I see now that every 512th character is in error. When I write all 'a' characters, every 512th character is an 'i'. 5 different text files generated errors in exactly the same places. What do you think this could be?
@alperenerdogan46023 жыл бұрын
privet privett bro !!! nice tutorial !!!
@ziyaonal47723 жыл бұрын
Can we use sdhc cards with this project?
@purposeoflife473 жыл бұрын
Thanks alot for the tutorial. It works , i have NUCLEO 32L476RG and it works ,, only one problem that i have 3 sd cards and 1 is working, rest of two are not working. But all three are showing fine on laptop, dont know that is the issue.
@maciejwisniewski13154 ай бұрын
Did you find out what was the problem? I have also l476rg and don't know why it is not working
@abdurrahmanmughal2153 жыл бұрын
I have a question
@anhngocle7383 жыл бұрын
thank you so much!
@meohoang77413 жыл бұрын
ong xài con nào ấy,toi xai f4 discovery lỗi ngay khúc f_open ko trả giá trị ok.ông có bị v ko,giúp tui với
@antonstoynev76683 жыл бұрын
Привет Олегсей, можно ли сделаем связ на Скайп или Ваибер что то пообщаемся ?
@paulg.30674 жыл бұрын
14:30 ... hmmm okay, to get rid of the warnings just rebuild the project and they are magically gone :D :D
@netherlabgames75114 жыл бұрын
lol yeah xD
@m4nuz3 жыл бұрын
it doesn't work for me... i wish i would be a magician also...