Xvive U4 Wireless In-Ear Monitoring System. Detailed review

[@Defmusicman1]

Is this system loud enough for a hearing impaired musician to use?

[@MaxSoloMusic]

I know it's loud. Don't know if it's loud enough though. I don't know anyone with hearing problems to check this. Anyone here in the comments section has anything to say on this?

[@jeri.studio]

Regardless of WiFi signals from other types of devices, 20:25 is a single demonstration of 1 configuration of channels between mic & IEM systems. In my experience, using xVive's mic system & their IEM system at the same time results in at least 1 mic not working, especially if there are multiple systems used with multiple mics. I checked with the vendor, & they explained this is because the Xvive transmitter & receiver antennae are just too close together when they're plugged into the board - & it's silly to plug each one into a different XLR cable just to space them out far enough. While I'm keeping their wireless mic systems, this week I'm returning their IEM system to exchange for a traditional 900 mHz IEM system that has more than twice as many channels to choose from.

[@thepottershousedoverdelawa1599]

You give a very thorough review of whatever it is you're reviewing. I have used the xvive for guitars but never wireless microphones or in-ear monitor. Thank you for the heads up on all of this

[@chakthealchemist844]

Great review ... great honesty ... Very good Max!

[@shebapottswright630]

Very informative and in detailed

[@TomMacalisang]

Again, just like my comment in your other video, this is how a review should be done. Nice!

[@pmumola]

Excellent review! Great detail. I put a digital system together for my band due to my failure to protect my hearing for most of my life, (tinnitus). I use the u4 system along with custom in-ears. My band is loud and some members are stubborn with stage volume. Last gig I experienced some sort of clipping, highs going in and out, like a dirty volume pott. I am technologically challenged and it’s probably a miracle that as a drummer I even put together this sound system. Can excessive volume on stage make this clipping happen? Again, thanks for the great video.

[@williamshaq34]

Fantastic review!

[@vacation_generation]

Great review

[@dmitry6239]

Great work, Max!

[@dmitry6239]

Shovel of pleasure))

[@Mifisto_SNZ]

Интересная штука! Хороший миксер!)))))))

[@johowohoj]

I have ordered and am awaiting the arrival...I am wondering if there is any info about the number of charge cycles this thing is good for...I know they sa6 5 hours per charge but how many times can I charge it? Any info on that? Thanks a bunch for your in depth reviews!

[@MaxSoloMusic]

Thanks! There's no official info on that just as there are no test results or anything. But at the same time, U4 uses standard batteries which I believe may be easily found on ebay for a couple of bucks. It's inevitable that sooner or later batteries will die and the replacement process is fairly straightforward and simple

[@LEVITMARKENT]

Hi,nice job..is this stereo or mono?

[@LEVITMARKENT]

You answered the question already in the video..Thanks

[@buzinon3492]

Thank you for should a detail review, I'm looking for a wireless IEM and this really helps. How does it compare to the Phenyx Pro PTM-10 IEM??

[@MaxSoloMusic]

I've never tried the Phenyx, can't really tell

[@smk666]

@@MaxSoloMusic Hi Max, great and informative content you have here! Sorry for hijacking the thread, but there's no other way of tagging someone on youtube, I guess. Have you tested the receiver with hi impedance headphones, like Beyerdynamic DT 770 Pro (250 Ohm) or DT 990 Pro (600 Ohm)? I cannot find any specs regarding output power or recommended headphones impedance. I'd really love to get a nice pair of studio headphones for mixing so I'm opting out of 32 Ohm versions, but I'd also like to use them for rocking out around the house wireless with XVive U4 and NUX wireless guitar dongle in tandem. I'm afraid that regardless of high output you demonstrated it might be too weak to drive DTs properly as they need about 4V RMS to be driven at satisfactory volume/headroom. Any thoughts on that matter? Cheers!

[@ffavini]

only in mono? if i want to listen on stereo?

[@mrgrehan9981]

people giving out about 2.4ghz is that a problem

[@CRONZ_2501]

This is definitely how a proper review is done!

[@brokenstudiotv]

Oh wow! This is how all reviews should be, covering pretty much every detail you'd expect and even ones that you don't even expect. I know this must've taken ages to put together so thank you for the effort

[@pedromaggion2644]

This is the best video review I have ever seen in my life. I don't even need an In-Ear System, but I want to buy this now. This is how good this video is.

[@ALIASZARDOZ]

Only one question : is it stereo or mono ? Why put headphones if it's mono ? If it's mono it is ridiculous... Do you know the same equipment for stereo sound in the same price ? Many thanks in advance. Phil from Dunkirk

[@SpiritDK]

I would love to use a system like this with my iems, just too bad the system is still very expensive, at Thomann this system is in dkk almost 1800kr but I can get a Bluetooth system that works but is nowhere as good for 150kr

[@AbaddonTv]

Hi! Thank you so much for the great review, you waved my doubt and bought xvive U4R2 because of you. Cheers. - Venzon from Philippines

[@romanellisonorizacao]

This is a true review! You covered pretty much every doubts I had!! thank you!

[@EnovagMusic]

What a nice product!! You show it with so much talent!! Video, sound, information, edition... Congrats!

[@ethnicacesar]

WOW!!!! VERY USEFUL EXPLAIN .THANKS SUCH AS FOR EXELLENT AND IMPORTANT DETAILS AND INFORMATION.VERY GOOD!!!!

[@A.J.99]

Отличный обзор, только почему не проверил расстояние, на котором он может работать? Видел в отзывах люди писали, что работает максимум на 9 метров.

[@JohnHancotte]

Great attention to detail! I just got the U4/T9 package as a birthday present from my wife. I have not tried it out. I'm hoping the 2.4 GHz issue isn't too problematic. I will try to have the transmitter near me via an XLR cable from the snake return. It's a bit overwhelming.

[@theresafreis]

Can you use the transmitter from the xvive mic kit with this receiver??

[@fourneauvalentin8537]

Wow what a review ! Thank you for all this work I think you can add to the cons list that it does not have an integrated limiter which seems a bit scary Is there any solution about this issue that I might not know about ?

[@toneranger]

Great review, I have the UI24 and U4, I've found a 1.5 metre patch is best to avoid wifi blocking the UI24

[@NoWayOutBand]

I have the SoundCraft UI16 system but I use a separate router for wifi connection. The last show we played the U4 interfered with my router and I kept losing connection with my system. Do you think I should change the channel selection? I turned it off and didn't have a problem. I use the 5g for the router. I really think you video's are great and have a ton of good information.

[@kamilchosta5526]

Amazing review as always. Do u have anything similar to recommend that's stereo and has similar size?

[@blackdembel2006]

Спасибо, Макс! Люблю твои обзоры. Всё чётко, ясно и по делу, без лишней болтовни и жевания соплей

[@derricksheppard2020]

I am totally knew to this type of monitoring system Thanks for taking your time to make my life so much easier when dealing with the hook up. I'm a solo singer/guitarist, so I think this system will serve my purpose perfectly! I'm using a simple Mackie Pro FX12 Version 2 and an HK Polar 10 column. Where should I connect the transmitter? ........ to the headphone jack or monitor out to get best results. (I'm revealing just how little I know about this new venture.) Thanks again for the awesome video!

[@luislanda-schreitt2631]

Great informative video, thank you! Would this wireless system be suitable for drummer/percussionists?

[@CooganBear]

Really great video. Very detailed tests. Thank you! Subscribed. 😃

[@Zarathoustra811]

Best review I've seen for those products. Would it be usable as a wireless headphones system with a guitar amp modeler like the headrush gigboard using the headphones output? I love my old wired headphones but not really practical. I feel like using that kind of system would give me some sort of solution. What do you think? Maybe a better solution?

[@andrewlee9508]

Your disassembly is what helped me decide on this product! I'm all about servicing and maintaining equipment.

[@MISTERUM]

Hey you did great review thanks.. I just got the set of xvive u4, basic i dont have a band. what I do is playback music,,, my first try was not so good idont know why I was not able to hear clear sound when I plug it at the head fhone output..I just dont know what I was doing wrong... but I PLUG IT main left ON TO TOP OF THE HEADFHONE and it works ......so far now working (my mixer )Depusheng DT12 Studio Audio Mixer 12-Channel I just ad my coment cause may someone know what i was doing incorret ...any how your reviews its good .thanks again .. wlad.

[@newmeutube1]

Hi Max. What IEM ear piece do you use? Thanks

[@marcus_mayhem]

I plugged mine into the phones output on my interface and they were very distorted. I tried several different in ear monitors and it was either way too low or distorted.

[@leesmithjones1137]

I’ve been advised to use earphones with 100 ohm impedance, do you think this receiver can power such high impedance adequately during a rock performance.

[@daviduribe4814]

Hi Max, I'm about to buy my first monitoring system (we play bars and small venues), I'm a guitar player, is this the right one for me? Thanks in advance.

[@jackrolfsness2156]

hey so i have some questions. whats the max number of receivers that can connect into 1 transmitter? i think its 6 but if im wrong correct me. and do we have to have wifi to run these? my band does alot of desert shows and there out in the boonies. thanks again for this video!

[@GROCMUSICCO]

How do you use these in a real world situation. They glitch on every channel. If a router is near by they glitch. Maybe I'm doing something wrong but I don't think so.

[@MeccaVideoPro]

Well done, and thorough! I just ordered one, should be here tomorrow. Hoping it works as expected but you intrigued me with running the cable to the singer (in my case sax player/singer) location, do you just leave the unit on the floor, or hang it from the mic stand? I use a wireless mic on the sax, and at times have the receiver at my feet, other times it's by the sound board, depends upon the band I am with. Looking forward to testing it out. thanks!

[@kataranimusic]

thank you for your detailed review Max, helpful

[@francescogallo5521]

Hi max, I just bought this one and when I use with my digital mixer, I feel hiss and frequencies cut when I play 1 2 and 3rd string. Is that normal? It sounds quite bad…

[@t1mman]

We've got the same mixer (Ui24r), it's a beast of a mixer! :P Great review, very exhaustive!!

[@666eradicate]

So if I get it right. Using 6 of them fot a Band of 6 people wouldn't be that great? Respect fot the review, you answered all the questions I had.

[@enochopokuwilliams]

I have the Xvive U4 but when I separate the receiver from the transmitter the wifi light goes off amd I lose connection

[@phyloo14revers40]

Just saw this detailed review (2 years later), and I must say that if "Review Awards" someday exist, you'll be an indisputable winner !!! That speaks to me all the more that I own a Soundcraft UI24R mixer... And about the fact that it’s only a mono unit, last month I asked on XVive Facebook page if they project a stereo/dual mode model IEM, and their response was : « We have plan for this stereo version »... COMING SOON ?... 😜

[@miguelfaraco]

Oi Max sou do Brasil e gostei muito desse video muito completo posso assegurar acabei de adquirir um x-vive u4 e estava procurando review e encontrei o seu muito obrigado

[@sofarsogod]

I have one question is it possible to use xvive U2 and xvive U4 to play and monitor an electric guitar connecting both wireless systems on an audio interface? I mean to practice at home but without cables.

[@sendforacar9323]

If you have a digital mixer board that creates a wifi network for remote control this does not work. Well the in-ears will work but your remote control app will not. Waste of money and antiquated.

[@samago20]

Excellent review! I bought one and I'm waiting to recieve it due to international shipping times. But to cope with my anxiety I keep watching reviews haha. Greetings from Uruguay!

[@koolBOY8323]

just picked up the u4 system. thanks for testing all the worst case scenarios and misuse cases. if it can survive that than using it normally should never be an issue.

[@ChristyThompson1221]

Hi. Excellent review! I do have a question you may be able to answer. I am trying to record vocals and hear myself while singing in the home studio I'm building. I don't have a mixer, but I have a Scarlett Solo audio interface. Could I use the U4 with the Scarlett going through a DAW? Thank you!

[@MaxSoloMusic]

Well, if you can connect your headphones to the Scarlett directly, than in case with U4 you'd be plugging the transmitter into it instead. So yeah, it will work. As long as you're monitoring through the DAW there will be some latency

[@wattage2007]

Where's your video with stereo IEM setup you mentioned? Can't see it anywhere in your channel.

[@theoliebregts8045]

I have a problem with my device , the reciever and transmitter only connect to each other witlhin a distantie of 4 inch further they disconnect. Do you know what the problem may be ....

[@derLoewie]

Great review. Thanks for it. :-) think this could be it for our band-start

[@serayllon]

Excellent review. Wasn’t sure to buy it, but I think it would be perfect for rehearsals and small gigs.

[@ggm1960]

Great review, probably going to get these.

[@langetlikisorma]

Do you recommend for singers to hear ourselves, and some of the backing track , how can I make this happen. Thanks

[@90Satch]

Подскажите модель заряжного устройства с дисплеем, которым вы заряжали на этом видео

[@tommurrayGTR]

Now this is a review! such detail. I bought one, and I'm pretty impressed, but haven't really had to use it while multiple wireless units were being used so we will see!

[@chrisjohnson4386]

Detailed as usual, amazing job by-the-way. You managed to answer all my questions and some that I didn't even know I needed to ask. Thank you for this!

[@valeriofrediani5563]

Awesome review! Do you know if U4 is cross compatible with U3D ?

[@telecasterbear]

I just got this unit. Other members of the band are using them. Haved used it yet.

[@sergiojavier4491]

Good video! Justo lo que buscaba, lo explicaste todo! Thank you!

[@Yosser70]

Great review mate. Are you getting the monitor mixes from the app or the mixer? I’m trying to set up a recording and monitoring rig for my lads band, using an Ipad and an 8 input audio interface. I can get the main mix out to headphones easy enough but cant find a way of doing individual mixes. Any ideas?

[@MaxSoloMusic]

Thanks. The mixer does that. We're really happy with this particular piece of gear. There are enough aux outputs. We use one of them for subwoofers and the rest are used for monitoring

[@Docksidestudio1]

The most important aspect for me is dropouts onstage. The U2 for me was utterly hopeless onstage. We have a few different wireless systems in our band and no matter what channel’s used the U2 dropped signal most of the time. I used it that one time only and sent it back. Xvive admitted to me that that U2 didn’t interact well with other wireless systems in the same room. Pretty useless.

[@MaxSoloMusic]

We've played plenty of gigs last year using U3. So far so good

[@mrlionel1965]

I have used U2 live now several times and it has worked flawlessly for me.

[@A.J.99]

Отличный обзор, только почему не проверил расстояние, на котором он может работать? Видел в отзывах люди писали, что работает максимум на 9 метров.

[@mildredbauza9940]

This is the best description of anything I've seen. You came up with scénarios i was wondering about but thought no one would ever cover,, thank you

[@markulrich3861]

Great Review MAX! One band that I manage the audio system for has just bought two U4 IEMs, and the mixer is a Soundcraft UI24R. This was the first issue I was concerned with, the typical 2.4GHZ transmitter. I have been wanting to change the UI24 settings to 5GHZ for many Months, now we will need to. Thank you for this review.

[@LaddieBoyo]

Excellent review, thank you!

[@benroberteastman3940]

I appreciate your review. I bought a U4 sight unseen and after your review i feel confident it will meet my needs

[@DanielKitchka]

Great video! Thank you for this info!

[@charlschuck6]

What type of battery details of this lithium type is requiered for each unit so much electronics my are out of warranty were I bought them at … any size or mah requiérement any hint before I attempt to repair ?

[@charlschuck6]

Nvm you gave info of the big receiver but transmitter any battery info ?

[@SAMNET777]

After two years of use it lost its range to 5 centimeters, now it doesn't work well.

[@enochopokuwilliams]

What could be the issue ? Please help

[@BunkerAudioPanama]

You take things apart??!!! Subscribed!!!!!!

[@trevorbuchanan1054]

Excellent video, well explained

[@davidkay3443]

So being completely new to the world of iems... Could u put this into my pa mixer.. from aux out? We dont any rack system etc.. so need to know if i can put this into my system..great informative video.. and new subscriber right here..

[@MaxSoloMusic]

It can be used as any sort of link where you'd normally have an XLR cable. So, 'Mixer Out' -> 'PA In' as well

[@chrisRIOT_official]

I just bought a set for my first IEM's and already was excited, this review has me even more stoked! I definitely recommended my other band members to buy a set of their own so they have their own mixes live. Thanks man! You're great!

[@michaltanay2315]

Please could you give advice ? This ear monitor system will be working on my B-3 2.4GHz Wireless Microphone System ? If not so then which exactly ear monitor system will be working on my B-3 2.4GHz Wireless Microphone System ?

[@tomberry2221]

Great video with excellent deep dive. Thx! I am considering the purchase of one of these units and your video was very helpful.

[@CairoBraga]

This was absolutely excellent, thank you very very very much!

[@DanY-ib7fc]

Best review i've seen on this! One question: I read it has no built in limiter. How important/dangerous is this issue? (Especially when other wireless devices could cause interferences with the signal.)

[@MaxSoloMusic]

Thanks. Right, no limiter. Do you mean the interference may sometimes cause loud pops? It's probably 1 time out of 100 dropouts. So generally if you see the connection is stable and there are no tons of dropouts, it should be fine. Although, once in a while I have experienced loud pops with U3 on stage during the soundcheck. Never during the gig

[@DanY-ib7fc]

@@MaxSoloMusic Yes, maybe loud noises due to picking up other signals. Don't have more expensive in ear systems (like Shure) for these kind of reasons the limiter in their receiver packs? Or is the limiter only built into the sending unit? The point is, I am looking for a convenient in ear system to plug into just my bass amp, to hear myself clearly in rehearsals (instead of just using hearing protection) and for smaller gigs. But the fact that there would be no limiter in the line holds me off :/

[@jdal1105]

Excellent review! Bought one. Very thorough and detailed. Great job 👍

[@richimbrogno4399]

Thanks so much, this is awesome. Just to add to the compatibility with the U3 (not 3c) I already own the U3 transmitter and receiver and I wanted to buy the U4 receiver only and use the U3 transmitter. It looks like it's compatible based on what you demonstrate here but I am concerned about the low volume when you used the condenser mic to demonstrate. Basically what I'd like to do is use the U3 transmitter out of an Aux channel in our QSC Touch Mix 16 and send that signal to my U4. It looks like it works but is the volume strong enough? Just wondering what your thoughts are. Thanks again for doing this!

[@ledinhhuy88]

i plan to do the same thing where a U3 transmitter sends signals to a mixer and a in-ear monitor. let me know how it works out for you. thanks.

[@garfieldgabay2548]

Give thanks, fromJamaica 🇯🇲🇯🇲🎹

[@russelleustachius]

I didn’t skip a single second, amazing review

[@antpolyakov]

ok, Xvive doing well... as likely the Shovel of Pleasure should do )

[@MrReStories]

But it's mono...Can't wait until they make a stereo version

[@lucasjuliancarballeira6392]

Why does this guy keep mentioning his ex-wife?

[@wedel610]

Will I get the same mono signal in both ears or just one since it’s mono?

[@ernestomorales2933]

Your video is what I needed, thanks!

[@skaholic_tv]

You should use type-c for a better charging

[@BRIGImusic]

Hey! Thanks so much for your thorough reviews about the XVIVE products. You are doing such a great job! It's really a joy to see! I have a question that you may be able to answer. I have 3 products: U2, U3C and U4. I have set these up with a Yamaha AG03 2in1 system (mixer+audio interface) and I am experiencing interference between the receivers that are all plugged into my Yamaha mixer despite the fact that obviously I have set each of them to a different channel. Am I doing something wrong? Is there a way to avoid this problem? I saw in your video that 3 systems should still be OK. I am a bit disappointed now. :( Thank you in advance, Brigi.

[@MaxSoloMusic]

Hey BRIGI. The thing is U3C and U4 run the same protocol and are cross compatible while U2 uses an older protocol and is not compatible with the other two. This makes channel settings a bit confusing because even set to the same channel U2 and U3C use different frequencies. I'd begin with making U3C and U4 work without interference, that should be easy. And then I'd try to find the right channel on U2. Shifting all of them to another channel might work. Another solution would be to use an extension cable or cables to place the receivers apart. That is how I make it work on stage - singers have a freedom of movement and no cable connected to a mic, while the receivers are placed right next to their mic stands instead of being plugged directly into the mixer

[@BRIGImusic]

@@MaxSoloMusic Thank you. :) The extension cable was the only way to resolve this.

[@theID2]

very useful video and i thank you for it. it gives me confidence that this system would be perfect for me as a single performer.

[@MaxSoloMusic]

Glad it was helpful!