U4 Wireless In-Ear Monitor System - Official XVIVE Video

[@JJohnston4Life]

I feel like I'd get a stern talking to if I questioned anything this guy has told me.

[@AngguSingsit]

Hi, mine stop working. Not getting signal unless they are really really close. Please help

[@yadanxiao2095]

Pls fill in the form on the website,there will have people help you.

[@metralla56]

Tendré en cuenta sus complicaciones,por cierto cuando me estoy quedando sin carga se quedan encendido dos señales y tengo que apagarlo

[@AlexisGitarre]

when will there be a STEREO VERSION?

[@JBastio]

You mention having to turn off your wifi - that's a non-starter given most modern digital mixers work with routers for wifi control. Did you consider this?

[@PoBoyRascal]

I have the same question.. my digital board sends its own wifi signal.. the host saying that stopped me from ordering just now..

[@8636daniel]

Excellent review sir

[@AngguSingsit]

What color does it show when the battery is full?

[@yadanxiao2095]

When charging the red light come on,after fully charging,the red light goes off.

[@rockkstah2550]

6 "different mixes" means 6 separate transmitter, there is no way you can have 6 different mixes with one transmitter and 6 receivers.

[@guyincascade]

He covered that in the video….

[@ElCondorSessions]

best Xvive U4 tutorial seen... any chance th 5GHz bandwith will be added in the future..? Even less latency and less interference issues...? I have been looking for an in ear WIFi system for quite some time and I am convinced the U4 is the one I need... with two transmitters and 6 or 8 receivers so I can make mon 2 mixes..

[@BakClashEchoVlogs]

Im a livestramer,Hope to have one of these🙏🏻💜

[@peterschaefer1665]

Even in a club most people in the audience have their phones on of of course

[@kenng531]

I got problems to pair each channel , it can not pair , how can I fix

[@yadanxiao2095]

pls visit the site and fill in the form for help.

[@daltonrandall4348]

Aux outputs aren't line level??

[@HoundDogMech]

Need a Wireless system that transmits a stereo signal from a MIXER to my Zoom H4n Pro's XLR inputs so I can record the Mixer output and the Ambeiant audio with H4n Pros 4 channel Mode.

[@metralla56]

El emisor mientras se está cargando nó detecta cuándo ha finalizado la carga.¿Puede indicarme sí es normal

[@XviveAudio]

Please make sure the unit is powered off when you charging, the red light stays on when charging and it will be off after fully charging. If it still keeps flashing red light, please check how long it will take to fully charge and how long the battery lasts after fully charging. Normally it will take around 2-2.5hrs to finish charging. If you have any questions, pls feel free to contact [e-mail]

[@peterschaefer1665]

Hello...it would be nice (in this world of digital modelers etc) if it would receive and broadcast in stereo. Especially from a headphone output jack.

[@Jeff4014]

If the xviveu4 was stereo, how would you connect it to the monitor aux in the mixer?

[@AlexisGitarre]

@@Jeff4014 Y cable. pretty simple.

[@emmanueldiaz4849]

Are you able to communicate with others that are connected through the ear pieces?

[@XviveAudio]

The u4 in-ear monitor system has no microphone and can only listen to sound. If you have any further questions, pls feel free to contact us. 😊[e-mail]

[@PaulAntonescu]

I would get it but its lack of ability to route it on a wifi router annoys me and I'm scared it'll interfere with IOT very soon, as in all the Internet connected devices at the gig! Is there a version of Xvive where you can set them up as in what router and how to connect it?

[@XviveAudio]

Hi, pls contact [e-mail]

[@GreatGreatDrummer]

Pourquoi on doit l'utiliser avec Wi-Fi ?

[@GabeSanchez]

I just picked up one of these. When I first went to plug it in, the charging indicators were on, but then turned off while charging. Is this normal?

[@XviveAudio]

Please contact [e-mail], thank you!😊

[@brentdrummer5177]

Hi there how do you know when they are charged ,and how to charge?

[@XviveAudio]

Power status LED of the transmitter and the receiver, indicates power status: Led off = 100% ~ 30% Solid red = 29% ~ 11% U4 provides USB charging cable，you can connect to USB Charger Adapter or other USB charging devices. Here for more info, xvive.com/audio/product/u4-in-ear-monitor-wireless-system/ ☺

[@brentdrummer5177]

@@XviveAudio thank-you

[@PoBoyRascal]

Try watching the video

[@guille_toledo76]

I still have a doubt. Does it work with a stereo headphones output??? The TS adaptor is mono......

[@XviveAudio]

Normally u4 connect to mono output of Aux. However, some devices do not have Aux or extra ports, and may use stereo headphone output instead. ☺

[@lumineux8649]

Please help me i can conect my xvive u4 on my tc helicon solo fx 150 thanks

[@MelnardEdaCinematography123]

how many rx you can use with just 1 tx?

[@ebenezerduncan-williams7372]

We use QSC Touchmix 30. However, for some reason, all the other sounds from mics, drums etc comes through the unit...is there a reason? The connection is a XLR.

[@XviveAudio]

Pls contact [e-mail], thx.

[@steelgtr]

Using stereo headphones, only one ear will work? (mono)?

[@charlesmerfeld2988]

Both but still mono if you use it for wireless jamming from headphone out from your amp it should still sound good just not a left right signal so everything is centered so no ping pong delay which shouldn't matter much

[@chriskuczynskimusic34]

Soooooo if i have a mixer with just one aux output and my drummer wants to play with wedges and I use in-ears can I use the headphones jack for my in ear monitors at a live gig? or does it have to be either the XLR output or the Aux Output?

[@yadanxiao2095]

There has one XLR Male to 1/4" TS Male Adapter come in u4 pack,you can use that adapter plug in Aux output,or just plug transmitter to XLR output.You can try the U4R2

[@helderureaify]

hello, my xvive u4 is not connecting. The green light turns off when they are 30 cm apart. Someone could you help me please? Is there anything I can do?

[@yadanxiao2095]

Pls send email to [e-mail],there will have person help you

[@peterschaefer1665]

Also re: latency, when you combine that 5ms with 5ms from your guitar wireless doesn't that become a problem?

[@romanellisonorizacao]

5ms is pretty low, you can't recognize it as a delayed signal

[@peterschaefer1665]

@@romanellisonorizacao yes but my point is when you combine guitar and monitor latency so 10 ms...wouldn't that be detectable?

[@romanellisonorizacao]

@@peterschaefer1665 You will start to detect latency issues when it's 30ms or more. The max you will notice on 10ms is a little bit of phasing, but nothing that will be a real problem on monitoring your audio

[@sgprox021]

Of course, with digital everywhere, all the latencies are added and we end up less immersed. . . and each manufacturer one by one says that it is not heard. . .

[@DimoNRD]

Сделайте такой, но стерео! Продукт хороший, но не хватает стерео😔 Трансмиттер L + Трансмиттер R -> стерео ресивер.

[@marcinslusarczyk4722]

Hi can I join to xvive u4 set r4 another two receivers bought independently, so all will be 6 receivers (6 people in a band) working with one transmiter from set with 4 recivers?

[@yadanxiao2095]

Yes,you can.Both the transmitter and receivers set the same channel then they can work.

[@Respecttheriff]

Just got the system. Love it so far! I noticed the lights on units were red when first staring to charge but both went out about 15min later. Is it normal operation for lights to go out once a full charge is reached?

[@jaareda9940]

Yes

[@n8dawg85]

Random question to another owner. Does your receiver unit channel button feel kind of loose? I bumped mine at a gig and it's kinda loose feeling but i'm not sure if that's just what they're like anyway?

[@bloodymary__]

What would the setup be for the transmitter if I wanted to just have a vocal monitor mix? (Just the microphone output)

[@PoBoyRascal]

Use aux and then ya only send what you want with the aux knob on the channels

[@bloodymary__]

@@PoBoyRascal I’m sorry I don’t get what you mean by aux

[@PoBoyRascal]

I dont know what mixer or other equipment you are using.

[@alexissongsforyou]

"Note: It may be necessary to turn off WiFi on other devices in the area in order to avoid signal interference..." Wait, what? What about all the cell phones with WiFi on in the room/ on stage? What about the venue WiFi, or the home WiFi for rehearsals? I definitely would need to learn how that would work before purchasing.

[@XviveAudio]

Pls dont worry and we will help you, pls feel free to contact [e-mail] 😊

[@Justinzandermusic]

Wtf no stereo?

[@YoungRebeles-t4o]

O'Reilly Locks

[@deepakprasanna7680]

This is better if the design has an external battery. When the battery lifespan is over, I can simply purchase a new battery and install. With this existing design, it is difficult to find a replacement battery and a service center to do battery replacement.

[@emmanueldallisonofficial773]

6

[@PhatOtterStudios]

What a mistake buying the U4. Any 2.4 ghz device will interfere with the U4. Nightmares…