🛠 How to REPAIR SPRAY WATER BOTTLE PUMP hand shower. Unique problem

[@Possum-Pie]

Thank you for the informative video. The manufacturers design the bottles to fail by the time the contents are empty. WASTE of plastic...If you can keep these working, it saves you money and saves waste in the landfills.

[@xVoLAnD]

Thank you, yes that is one of the things I do with old things. A lot of old things are entitled to a second life

[@user-xy5tv3xk9y]

This was a great video! Only issue was I broke the piston using pliers trying to remove the valve cap (the black thing). I ended up using a small flathead screwdriver to pry apart the valve cup. I attached the straw to the broken piston with plumber thread seal tape. THANKS to your video, my spray bottle sprays again!

[@TheAustralian1x]

Thank you i fixed mine because of you, once you get the cover off its quite easy, i feel these are made to break so people buy more, these are so easy to fix

[@MentalLemur]

As someone in the USA (cant barely afford rent, or anything else really) and trying to fix my mist bottles for houseplants (all three have gotten jammed in the same way with grit making way into the pump/nozzle), finding any info on how to just take the square cap nozzle off is frustratingly impossible to find. I laughed watching this because i basically did the same exact thing but was sure i was going to break it so had to find a vid first. THANK YOU.

[@paramoandino1766]

It is difficult especially when the Company makes them in one solid piece so you can't them apart. I have a broken bottle cap and I would try to get it loose by pliers and screwdrivers to no effect. I will try to paste the broken cap with epoxy as I originally thought. But it was a good try. Thank You.

[@trendy_nails]

Thank you 🎉 fixed my Gardenia spray bottle.

[@pjflannery7680]

Vitalii Te, good work. I sure love your patience and perseverance...

[@xVoLAnD]

Thank you

[@shashankdixit2305]

Thank you uncle to help me to fix this

[@johnpeters2526]

Thanks to you I mnaged to fix my spray nozzle head 👌👌👌

[@Jilly1927]

Always have that kind of problem with some spraying detergent bottles. They don't work after sometime which is pretty annoying. And also I have perfume bottle, the spraying part is faulty. If only that can be repaired. Thanks for the video. Really helpful.

[@xVoLAnD]

Thank you, for your comment!

[@shivangipandey3208]

Well it helped me to understand the assembly of Aerosol 😁 Thanks for the video 😇

[@yinumzhou]

I didn’t expect the fix to be so difficult

[@LuisRodriguez-zb8wf]

It is not that difficult, the author of the video simply does NOT know how to do it, it is extremely simple

[@kartusmoon4264]

@LuisRodriguez-zb8wf Then film and post if that's true

[@vrijevoeten]

@@LuisRodriguez-zb8wf Please elaborate!

[@davedaves3489]

Its not i bet you didnt even try it.

[@michaelmarco4490]

Love your accent !

[@mariumsiddiqa3252]

Thank you for this video

[@r7z859]

its pretty unique problem you fixed, thanks for the video!

[@xVoLAnD]

Oh, sure. That's why this video is here. Thank you!

[@piyushkushawaha8150]

It worked Thank you 😊

[@rabianakla]

Thank you very much. You have made me very happy🥳☺

[@xVoLAnD]

You are welcome!

[@maggyliciousss]

Super! Ukrainian people can fix everything 👌🏽😃 Great!

[@xVoLAnD]

Sorry, but I'm not ruSSian. *I'm Ukrainian.* Therefore, it sounds like an insult, I'm sorry

[@maggyliciousss]

@@xVoLAnD oops im very sorry🫣 I didnt mean it in a bad way, u just sound like a friend Im very sorry 🙏🏽

[@xVoLAnD]

@@maggyliciousss The fact is that most of the achievements that ruSSia boasts of were made by Ukrainians. Just before, the Ukrainians didn’t attach any importance to this, but now - it’s important.

[@maggyliciousss]

@@xVoLAnD ok , i totally understand you im gonna change it up real quick for you 😃 (By the way, i respect every person, no matter where he from, because pride is something that can destroy so many things in life)

[@xVoLAnD]

@@maggyliciousss Sorry, if you heard some kind of pride in my words, but for me this is justice.

[@kirangbkirangb8463]

Thank you so much

[@TheDancingDame]

This helped! Thank you

[@Jaz07860]

I tapped the nozzle a couple of times on worktop it started to work. Thanks to this video I learnt that valve needed freeing so usually a tap does the trick. Haven't tried but I suspect if leave nozzle in hot water 5minutes clears and frees nozzle.

[@xVoLAnD]

Congratulations! Often, the ceramic ball inside sticks and this helps

[@vnodkmar]

Tapped it till few blocked particles came out. Worked like breeze!

[@sangre3]

Excelente!!!! Muchas gracias!!! Saludos desde Argentina!!

[@xVoLAnD]

¡Gracias! ¡Hola desde Ucrania!

[@allisround]

Just remove to nozzle and blow hard from the bottom making sure your lips don't create a vent for air to leak. It'll fix it. I just did mine after seeing how difficult this video is. Or if you have a screw type cap, remove it. Close the opening with your finger while pressing/pumping out water.

[@virabhn7736]

Нарешті вдалось поладнати пульверизатор завдяки вашому відео. Вдвічі приємніше, що його зняав земляк)))

[@xVoLAnD]

@@virabhn7736 Вітаю! 💪🏻✌🏻

[@azkailyas4902]

It works thank you so much!

[@simo2869]

Thank you so much , it really works

[@NaV_Tiger]

Thank you it start working thanks a lot.

[@davedaves3489]

Great video.

[@xVoLAnD]

Glad you enjoyed it. Thanks!

[@davedaves3489]

@@xVoLAnD it was EXTREMELY helpful. Thank you. Great narration. Simple and to the point.

[@elishaabraham66]

Informative

[@faize.sheifa.beleth]

THANK you SO MUCH!!! This is a problem that has been PLAGUING me my whole life, and bothers me to no end- I just bought a brand new spray bottle that was dribbling all over my hand, /after/ I'd spent about an hour labelling and preparing it for work. Oof. Thank you for my life!!!!

[@xVoLAnD]

You are welcome! 👍🏻

[@TheKomentor]

You can also buy and keep spare nozzles/guns (without the bottle) and maybe clean the spoilt nozzles when you find time.

[@sauravdey2266]

Are you kidding me it's so tough that even you are struggling.

[@xVoLAnD]

It's easier than it looks

[@sauravdey2266]

Nope not that easy i tried.

[@hamhumtube]

It was easy just need to be patient and enthusiastic

[@sauravdey2266]

The nozzle itself is hard to open it's like it's being glued though it's not. And with patience and enthusiasm u cn even build a house. The process is easy theoretically but practically not so much. See the video , the man in the video himself is struggling so much.

[@holyn8]

THANKS!

[@amitverma99999]

Gr8 video, putting finger at the nozzle and then trying also works, it creates vacuum and the pulls the water

[@xVoLAnD]

Yes, you are right, but if there is an air leak, it won't work.

[@lelouchvibritania743]

Guys if it still doesn't work or the suction is weak u can still use it just you can only use it remove the straw or what you guys want to call it, put it up side down and it will still spray but its just more weird

[@lynetteturner223]

I tried just squeezing the bottle with its top on really hard a few times then it worked just fine. I'd try this before taking it apart!😊

[@MohammadTawaha]

I put a like citic acid product and Worked! Without even opening anything!

[@walterbatista9523]

*Esse americano está detonando o pulverizador. Quero ver ele montando novamente 😂kkk*

[@xVoLAnD]

É necessário subscrever para ver isto novamente

[@SuperDOMEAL]

Muchas gracias!!

[@redbacktrekkers2986]

The one section of the bottle I would like to see was the removal and reinsertion of the blue handle, sadly both these are not in the video :( else great walkthrough

[@xVoLAnD]

Did you mean this 3:14 ?

[@litodianapublicidad2095]

Lo intenté pero en mi aerosol todas las partes estan pegadas desde la cubierta! todo!!

[@MDPERWEZALAM-bg4nb]

I just like you technique

[@xVoLAnD]

Thank you!

[@farjanakeya8316]

tnx

[@ElmoufiDZ]

thank-you

[@modame659]

Man took the whole thing apart 💀

[@henrywilliamgallopedraza4731]

Bueno, me funciona un pequeño truco... Por dónde sale el agua a presión soplo fuerte, activo el disparador y la manguera debe hacer burbujas en el agua..y listo

[@xVoLAnD]

Si no presuriza el interior, no funcionará. Entonces tienes una fuga de aire.

[@theoriginalchefboyoboy6025]

well, it certainly was an honest video…

[@rajeshkumarmallick6690]

Nice video

[@lumiereesperance3191]

I 'll buy another one.

[@shal7501]

Why you cut the nozzle part?? I still don't know how to remove the nozzle.

[@xVoLAnD]

At 6:02 you can see that I didn't cut anything off. It's hard to get it off.

[@shal7501]

​@@xVoLAnD when I said "cut", I was referring to the video, not an actual physical cut. You didn't show how to remove it.

[@xVoLAnD]

@@shal7501 I understand. I did it behind the scenes, sorry. It's snap off

[@christinatham-yu3gu]

How to fix it back?

[@xVoLAnD]

Do the same steps in reverse order

[@yashsahu5522]

Sorry you did it correct. But, simply squeeze the bottle 2-3 times hard, and done...😎

[@xVoLAnD]

I don't think it helps because the system has a leak and doesn't create pressure inside

[@avimango46]

My spray bottle gets choked after putting the outer cap?

[@rick_from_yr]

I think I will buy another one😅

[@xVoLAnD]

@@rick_from_yr Okay, congratulation!

[@henrywilliamgallopedraza4731]

No, realmente no es difícil, tan solo un poco d iniciativa y lo logras...

[@xVoLAnD]

Sí, tienes razón.

[@vrijevoeten]

I was hoping for an easy fix 😞😞😥

[@hyderkamal8703]

All parts made of plastics ,I could not understand you should stand step by step

[@blueturnsred4330]

The ball of mine is missing

[@xVoLAnD]

Maybe it's stuck, it happens all the time

[@ОлегПетров-в6к]

Богатым американцам нечего делать 😂😂😂

[@evokaiyo]

All you need to do is squeeze the bottle to push the liquid up the tube/straw and you'll find it spraying again

[@gardnerberry113]

I tried that on one of those high-dollar Zep bottles and it responded by leaking (heavily) around the trigger with every pump. I guess I'll use the el cheapos down at Dollar Tree. 😏

[@sangre3]

No porque estaba tapado con Algo gomoso... No lo podia sacar hasta que lo abri y lo removing manualmente...

[@sayedtamjid5988]

বুঝলামনা!! কতক্ষণ এদিক, কতক্ষণ ওদিক চেষ্টা করছে।

[@henquius]

To disarm simply with dynamite, when we cannot do the simplest things

[@tatheerkhan351]

Not working

[@xVoLAnD]

It always works. Check for air leaks. The inside must be pressurized.

[@tatheerkhan351]

@@xVoLAnD I'm not understanding what to do with this... I opened every part cleaned it, fixed it back but condition is same..

[@xVoLAnD]

@@tatheerkhan351 The basic idea, is to create internal pressure, resulting in fluid escaping during pressing. Check all components for free movement (e.g. ceramic/plastic ball inside). This will work.

[@tatheerkhan351]

@@xVoLAnD kindly do this for me .. I'm done with this ... Btw m surprised that u replying 😊

[@xVoLAnD]

@@tatheerkhan351 I'm responding because I'm confident it works. Every video I make is made to solve problems. All right, let's get this over with.

[@LuisRodriguez-zb8wf]

It is not that difficult, the author of the video simply does NOT know how to do it, it is extremely simple

[@xVoLAnD]

Really? What don't I know? Why don't create video and show everybody how to solve a like this problem more easily?

[@brrjohnson8131]

I've never managed to pull this section out. If it's so easy you must have a trick you could share? Or you've got nothing.

[@lifeunleashed]

too much work

[@rufio5140]

Just throw it away n get a new one. It's not worth all of that

[@xVoLAnD]

Yes you are right, unless you are interested in how it works and applying your knowledge to other areas

[@rajeshkumarmallick6690]

Effort more but less like or subscriber

[@Nomychannel-r8f]

This is so simple… Take one finger and cover the spray hole while you’re working the trigger to spray the stuff out…uncover the hole when it begins to flow …you’re back in action. You’re welcome .