XY GT Falcon Build - Part 8 - Fuel System Made Easy

[@solarmanmick2368]

Great seeing Aussie Mussel on KZbin

[@johnnylom9915]

Guessing by the shape a holden coupe or at least i wish. That CAP was used to put more weight over the rear end

[@mattmerc4785]

Back the shoe adjustment off off until the wheels spin then adjust handbrake up the front till it's nice if they are over adjusted you will smoke them on the first drive and possibly cook the wheel cylinders seen it done lots good job lads keep it up 👍

[@myxrutefalcon269]

That's the little tank.

[@evanboubouka3031]

Correct about the tank, that is the small item. Big tank is 36 gallon and does not have spare wheel well

[@brettwatson-will3388]

Great channel... You bloke's aren't tools and do a really good job on everything you do... You have some very nice cars also.

[@josephhanson9728]

Love xy falcons can’t wait to see this thing running.

[@FuManchu5ltr]

I like to think you guys will see 15-20 thou new subscribers this year.

[@xagentofchaos_8783]

Great work boys. Appreciate everything

[@waynesummers7384]

Should you possibly look at putting a second filter up near the carby? Like a plastic Ryco one?

[@jaygribbin6790]

The big tank is 2 bottom halves joined together with no spare wheel hole makes 36 gallons. The XA big tank just had no spare hole and held 28 gallons.The stock tank you have there is 16.5 gallons.

[@paulstead8635]

Hey guys great videos! What brand car hoist do you have?? Thanks

[@RocketsFishingAdventures]

Cap! What's under the covers????? Maybe a Holden ute so you have the Trifecta (Panel Van, Sedan and Ute!)

[@bowdengrace930]

Captain Cappy cap Cap!

[@rustymonaro184]

Hj monaro coupe is my guess by boot spoiler and big bumper with rubber strip

[@stephengaraway3243]

That hard line will get in the way off the dizzy when trying to time it

[@rustymonaro184]

Hj monaro LS coupe is my guess by boot spoiler and big bumper

[@utef111]

2 door HQ under the cover ??

[@kevinhamling1963]

G'day guys. WORD OF THE DAY CAP So everything is coming together. Nice. If you're running a new wiring loom you should film that . I reckon that could be interesting. So thanks for sharing ✌️ Peace from Melbourne 3810.

[@jamesbaylis9438]

Back when you just need a couple of spanners, hammer and screwdrivers. Happy Easter to All. I'm gonna guess a HX is what's hiding, maybe a Coupe.

[@davidsmith3633]

During this video I noticed the rear spring rubber mounts looked cracked and perished, I hope with all the work you're doing on this car that you will be replacing them?

[@Dewbs]

I’m thinking there’s a LX torana hatch back under that cover 🤔

[@nameundetected6867]

My guess next project is foxbody mustang 😊

[@erikv86]

Damn Boy, that's a big a$$ cap!

[@davidbell4410]

Word of the day Cap. That GT fuel cap is larger than most small hatch back's wheel trim's

[@self-rustoration-society]

Mate! So much more room for activities! Just don't get caught in the trap of "more room, more stuff" 😂

[@dylank8204]

You might need to get another rubber o ring for the fuel sender. The one supplied in the kit are rubbish. See how you guys go when you put some fuel in

[@waynesummers7384]

VL commodore under the cover maybe 🤔

[@TankyMcStagger]

Without mudflaps that hardline looks a bit exposed to rocks etc from the front wheel. something to think about.

[@TankyMcStagger]

CAP 😜

[@matthewwhittaker2049]

Hi guys, I think you need to put a breather into the filler neck.those caps don’t have a breather. I made this mistake and my fuel tank swelled up and cracked

[@bradpeachey1]

Torana Hatch is my guess.

[@timwhalan6417]

👏👍🏻🍺

[@haches21]

The xe?

[@2burning2turning]

Don’t use an EFI fuel filter on a carby, you’ll suffer fuel starvation at high rpm. Just run the clear plastic on in the engine bay. Easier and cheaper, just like factory.

[@darrendiolosa8441]

Guys I’m sorry but you’ll have to pull the fuel sender back out and use a fuel lubricant on the sender unit o’ring if you don’t it will leak I experienced it my self not fun when ya leakin fuel, meatball garage went through the same thing he made it hilarious 😂😂😂 watch his vid believe me best vid on utube

[@LawnPotato]

I definitely wouldn't be running ally fuel line, it fatigues on the bends and ends up cracking. Not that the falcon needs engineering, but they would knock that straight away, better of using steel bundy tube.

[@daveb5016]

Charger

[@geofferyrobertson6608]

should have at least used Engine Black as it can stand up to 550 degrees heat ..... engine paint way to go

[@shaunhinton3691]

Looks like a camaro 🤷‍♂️🙈👍

[@65Coasty]

The fuel filter should be between the pump and the carby. And not an efi filter. Nice job on the hardlines.

[@stevepierce3509]

Fellas its the little tank. A GT was optioned with either a small tank or the Big tank (Bathurst Tank) which is 164 Gallons. The GT HO had the Bathurst Tank standard. FYI. DONT PAINT THE FILLER NECK !!!!!! They was NEVER PAINTED Fellas. Please do your homework before doing such silly things on this build to make it correct.

[@speedd8r]

Cap