Yamaha 225 Powerhead Removal | How to Remove a Yamaha Powerhead | Boats.net

  Рет қаралды 39,869

Boat Parts

Boat Parts

Күн бұрын

Пікірлер: 15
@skunkedagain
@skunkedagain Жыл бұрын
Sooooo good! Thank you, and I’ll always buy from you because of your great content!
@wassawbound2926
@wassawbound2926 4 жыл бұрын
These videos are great. Can you please do a series on the HPDI 250 or 300? There is plenty of them with blow pistons around. :(
@Userqwerty-ky8bf
@Userqwerty-ky8bf 4 жыл бұрын
What power head stand and adaptor do you use?
@gt7cuppels418
@gt7cuppels418 4 жыл бұрын
I would like to see how to repair the power tilt and trim on the Yamaha 225
@collinnguyen7161
@collinnguyen7161 3 жыл бұрын
Love your videos tips and instructions. Do you know if the powerhead and mid section from the F225 fit into the F250? Thanks
@bradwestmoreland
@bradwestmoreland 3 жыл бұрын
Took my midsection off this evening only to discover the corrosion is worse on the powerhead than it is on the midsection. Is there any option to repair the corrosion on the block?
@Mr_Navil_Campo
@Mr_Navil_Campo 5 жыл бұрын
Hi, I bought two 2003 Yamaha 200hp motors I was told one had small corrosion on the exhaust, called a local mechanic shop and they stated if the corrosion got to the power head the motor was done for. My question is how do I know if the power head is damaged by corrosion? Is it true you can’t put it back together if there is corrosion in the power head ?
@thebandlounge
@thebandlounge 4 жыл бұрын
Do you have to drain all the oil and stuff out of it prior to removing the powerhead?
@ileik99
@ileik99 3 жыл бұрын
What was the repair for the corrosion at the bottom of the powerhead? Replacement part or new powerhead?
@bradwestmoreland
@bradwestmoreland 3 жыл бұрын
Did you ever get a response? Took my midsection off tonight, the corrosion is worse on the powerhead than it is on the midsection.
@toasterj3643
@toasterj3643 Жыл бұрын
my steering arm bracket broke due to rot on my 1996 yamaha 200 hp v6 outboard does powerhead need to come off to replace
@RidgeRunner4X4
@RidgeRunner4X4 4 жыл бұрын
How do you disconnect the water pilot line? (Last step in manual before hoisting)
@vincehoward4273
@vincehoward4273 Жыл бұрын
On a 225 Yamaha the lifters caps fill out how do I put them back in the right
@felipepazos225
@felipepazos225 Жыл бұрын
How can I get John Tally to rebuild my outboards?
@Joey-w3c
@Joey-w3c Жыл бұрын
We’re going to do this and this and this…..use your imagination lol
Какой я клей? | CLEX #shorts
0:59
CLEX
Рет қаралды 1,9 МЛН
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН
Changing Thermostats On A Yamaha Outboard | 2006 F225 3.3L
5:41
Born Again Boating
Рет қаралды 75 М.
Yamaha 100 Hour Service
30:37
Leon Griffin
Рет қаралды 1 МЛН