This was an excellent video. Ultra helpful and informative! Thank you for making and posting this!
@robertneighbors40912 жыл бұрын
If you study the charts in the Yamaha book carefully, you will see that 20-50 multi has the best fit for Texas summers at 95 to 100F. I am not using new aluminum or copper washers, I just keep old washer and wrap oil plug bolt threads with 12 turns of teflon tape, never had one come out. Same on my truck for oil changes. I have witnessed outboards run in trash cans of water tear through trash can wall when owner engages propeller.
@muskyhunter20728 ай бұрын
To all that view this video: Use the correctly rated oil (FC-W, 10W-30, or 10W40 as shown on the label on the motor). The oil he used is 10W-60 - way out of spec and does not have the marine additives that FC-W oil has. His product is NOT GOOD for the engine. Also he should have waited for the full 20 hours to allow the engine to fully break in before changing the oil. PLEASE read your manual and follow what the manual says...they are the experts.
@jege415 ай бұрын
Thank you
@ConalFlood2 жыл бұрын
Correct way to dip the oil is to not screw the dip stick in, the oil level is 600ml in this engine No more or less it is very sensitive and how much oil is put in the engine.
@DaBinChe2 жыл бұрын
that was what I thought too, coming from using hondas, but the yamaha owners manual says to screw it all the way in. Each mfg. has their own version of doing things.
@kawasakiwaverunning Жыл бұрын
Thanks for the video I have the same motor, now I can do my own oil change, btw where can I order the aluminium washer and size specifications?
@DaBinChe Жыл бұрын
I get them in a bulk pack on amazon, don't recall the size, maybe an M10 bolt size
@chrishidalgo59982 жыл бұрын
You funny i'm gonna do this soon to my motor
@LuisRamos-nz8us2 жыл бұрын
That motul oil is proper for your motorcycle... does it have the specification for your Yamaha outboard?? Hummmm...!
@ryank6752 жыл бұрын
Hi, did you also grease it by yourself? I found one grease point on the shaft is very confusing. There are two holes and should be grease in one hole and see the grease out from another hole, but there’s no fitting in the hole. I’m not sure how to fill grease into the hole.
@DaBinChe2 жыл бұрын
There should be grease fitting for greasing locations not just a hole.
@LuisRamos-nz8us2 жыл бұрын
The oil level is too high! Not good also!
@vansal13 жыл бұрын
Livello olio troppo alto. sporca le candele...ciao