Yamaha battery dongle for ebikes

[@c1mat1]

I have been hoping that somebody would come up with a way to retrofit another battery for Yamaha and finally it's here. Thank you for sharing this and making this video.

[@JimmyVandijk-u6t]

Bro the controller is located in the motor or outside of the motor??

[@erdbeerfilm]

Top Info 👍

[@haraldsauer728]

Where did you get the replacement battery from?

[@LierskogenEbikes]

Random battery seller from Internet shop.

[@MrAvandalen]

Thanks for the nice video

[@rayenradegonde2994]

That's great please send link to purchase that module

[@LierskogenEbikes]

You need to contact the dongle creator by mail. Here is link to his website: avdweb.nl/solar-bike/batteries/battery-hack

[@fatbike_j_cool4779]

Great!

[@Jaywin-cr9ct]

may I ask if this dongle will work with my SPECIALIZED TURBO LEVO M1 mid drive ebike.,i have a problem with the battery BMS defective.Thanks for the info.😊

[@LierskogenEbikes]

It works only with Yamaha motors.

[@Thorn1155]

Hi, Does the battery indicator on the display indicate correctly when using the dongle? Is range estimating correctly?

[@LierskogenEbikes]

Dongle producer told me, that dongle will give correct battery charge level only when it is installed on charge and discharge line. It will not give correct values, if your battery BMS has separate charge and discharge lines. Fortunately, it does not affect how the motor works.

[@Thorn1155]

@@LierskogenEbikes Exactly, I figured it out. I will replace the BMS and let you know how it is. Thank you for the quick reply.

[@Thorn1155]

@@LierskogenEbikes I installed bms not separated and the indication on the display is still 100%. I discharged to 38V while driving, the indication did not even start. I set the dongle according to the menu recommendations. Any idea for this to work properly?

[@LierskogenEbikes]

@@Thorn1155 I don't know, if you set correctly the capacity of the battery pack in the dongle. If you did that correctly, than you need to talk with Albert van Dalen to help you out what is done wrong.

[@EnthousiasticWalliby]

I have a Yamaha motor that is powered bij Sparta ION. It's a bit different than the classic Yamaha PW. Can this work for me?

[@LierskogenEbikes]

What it is this Sparta ION? This chip works with all Yamaha mid drive motors.

[@EnthousiasticWalliby]

This is a motor that is tuned by the brand Sparta ION. So the wiring is different. I have no idea of the print in the motor the same

[@quyenhuynh9050]

Can the device work at a voltage of 42v-30a, and according to the signal and power wiring diagram, the module can work 24/7 or its lifespan is 3-5 years?

[@LierskogenEbikes]

I'm not a producer of this chip, so I don't know the technical details. It works with Shimano system voltages, which means up to 42V.

[@ThePowerknoedel]

Hey, I wanted to use the Yamaha Battery from my Haibike for my CYC Photon build unfortunately the battery wont give the motor its full power due to not connected communication line. Is there a way to trigger the battery that it will give its full power?

[@LierskogenEbikes]

Yamaha battery is designed to give max power up to 600-700 W, since this is the peak power for Yamaha motors. It won't give you higher power due to limitations in battery BMS. Don't bother modifying it, just buy generic battery from Aliexpress that can handle loads up to 1500W.

[@andrewlee4938]

That’s exactly what I’m trying to do It shows the full voltage out of the plus and minus but it must hold back the amps without the communication wire as the display of the other bike lights but that’s alln

[@royalkingzs-ny5jd]

Hello 👋🏾, is it available to buy it now ?? Please link or qny postive answer , i reqlly need one of this dongle

[@LierskogenEbikes]

Check out website avdweb.nl/popular/maxun-e-kit/battery-hack

[@grantmount]

Why didnt u set it to 42v the 1st time instead of 36v??

[@LierskogenEbikes]

Voltage doesn't matter as long as you stay within operational limits of the particular controller.

[@EventyrN]

Hei! How much vill be cost to improve motor PW SE with dongle(if it will be avaliable)?) I live near Drammen

[@LierskogenEbikes]

Hi, this dongle is out of stock temporarily. Contact me for details through the email.

[@nawrozlateef4990]

how to buy this dongle?

[@mefistofel1985]

Is it possible to repack original Yamaha battery with new cells? Will it work in that case?

[@LierskogenEbikes]

Sure thing. Case is just a piece of plastic. Only electronic matters.

[@FolinP]

Congratulations good video !!! hello I have a bike Ariv Meld by General Motors with central motor on the pedals in my case the battery broke down and 43v and 6Ah with 259Wh are no longer manufactured I noticed that 2 thick wires and 4 thin wires come out of the motor Can I make a change to the engine with another controller and another battery to use the bike engine? please help me with any advice what parts I should buy thank you.

[@LierskogenEbikes]

Hi, if you find a programmable controller, you may have a luck to pair it with your motor. Phaserunner controllers from GRIN seem to be the most flexible ones. Keep in mind, that nobody will help you setting up the controller with your motor. If you mix components from different suppliers, no company will give you any support nor warranty. You are on your own in this.

[@adminkoon6099]

I want to buy 1 product. please guide me to order

[@LierskogenEbikes]

www.tindie.com/products/avandalen/yamaha-battery-dongle/

[@kennethwebb7922]

Anyone know what the error e and f is on sduro 1.0 battery hiabike yamaha if i fix bms would that error go i see burnt component on bms near bkue and white wire cheers.

[@LierskogenEbikes]

If you can see burnt components on battery BMS, than it's definitely not good. Meaning of error type is less important. Replace Yamaha BMS with generic one plus this dongle.

[@kennethwebb7922]

Cheers pal appreciate your help

[@kennethwebb7922]

Can you guide me what BMS would be best iv no idear it's the original battery from haibike hardseven 1.0 2019 model cheers guys

[@kennethwebb7922]

Hi I got the dongle says on sellers site no BMS needed and is it easy to fit did you have to input anything by usb on the dongle ? Thank you.

[@LierskogenEbikes]

@@kennethwebb7922 BMS must be always installed on the battery unless you want to have some fireworks on a display during charging at your home. This dongle is not BMS chip in itself.

[@vladimirdeutscher9092]

There could you help me I cant find this dongle on internet for sale😭

[@LierskogenEbikes]

www.tindie.com/products/avandalen/yamaha-battery-dongle/

[@LierskogenEbikes]

Unfortunately this dongle is not on sale for the time being. I really hope it will be available again in 2023.

[@nsld8891]

How can I order this?

[@LierskogenEbikes]

Check film desciption

[@bicycleriderlive6818]

where can i buy this hacking dongle

[@LierskogenEbikes]

www.tindie.com/products/avandalen/yamaha-battery-dongle/