Yamaha DT50 Test Ride & Top Speed Run (1988 model)

[@orical2832]

My first bike was a brand new 1987 Yamaha DT50. Over 30 years later and I still smile when i think of it. The freedom that bike bought me as teenager. Aaaahhh the days!!

[@AnakinSkywaIkr]

In April 2022 I will have the chance to drive one legally. Do you think it is worth buying one today?

[@orical2832]

Yes. Buy a good one and keep it. 20yrs from now it'll bring you great happiness.

[@AnakinSkywaIkr]

@@orical2832 alright. Thanks for answering

[@markcross6864]

Exactly thirty two years since I had my one, a 1984 DT50 mx. Restricted to 30mph in the uk but on our little roads it was enough. Oh the memories 🥲

[@MW-tt3fy]

I had a DT50 in the early 90`s (70km/h but my parents didn`t now it was a little faster 😂). Black-Red. I loved this bike. Time of my life. I had a GSR600 and a XjR1300 after - but my best times had with my DT50

[@mineblock9024]

Had one of these in the same colours for my first bike back in 1987 - it's a pleasure to see and hear one again after so long

[@vengeancejustice5329]

me too , 1996

[@brianh2421]

My first bike in 88... I was 15 and rode it to school..

[@darrenhanson7813]

I owned one in 88 and sold it 2 years later and regretted it ever since. One of the Best street and trail bikes Yamaha ever made.

[@daneelherholdt9707]

My first bike back in 1997 was a DT50(actually owned two for about 2 decades) and boy it taught me so much about bikes. One thing I hated is the 2-stroke build-up in the exhaust as this really hamper the performance of this little 50 as time passes by. And watch the heat when venturing off road as this will shorten the life of the 50cc power plant. One if not the best ever 50cc.

[@youremybiggestfan]

Beautiful. Had one of these in my teens.. I would love to get one again at some point.

[@jasona9393]

I had one of these as my second bike after my Yamaha FS1E was stolen! It was in 1988, it was a grey import into the UK from Japan and was absolutely bloody brilliant, I loved it. I rode it vast distances as well, for a 16 year-old on a 50! SO nice to see one of these up and running and in such amazing condition.

[@juu6967]

currently building my dt50r 1995 after it sitting for 1.5 yrs

[@rafrick]

Did you have a preference between this and the FS1E? I'm currently weighing up buying one or the other (I'm in Mauritius so the price is similar for both).

[@amigoboofo1849]

I had one like that back in the days.Dad i miss you so much!!!

[@proelitjump1355]

What happened

[@branvd]

I had an 88 when I was a kid. Black and yellow. That sound brings me back. Thanks for this video.

[@ianpaiva6249]

If you brought that bike to portugal you could sell it for 4k easily.

[@nickyyy1236]

My father bought one today. This motorcycle was his first and since I am now looking for the driver's license he bought me one💯🥺

[@johnnygeorgopoulos4072]

This was my very first bike I bought with my own money I made working when I was 11yrs old, I absolutely loved that thing and rode it absolutely everywhere, streets(legally of course 😅), trails, dirt, miles and miles each time I took it out.....sure it wasn't fast, but it sounded cool with that little 2-stroke and it was quick enough to keep up with traffic 😂

[@kiwicol7383]

Had this in a 125 loved it so reliable and fun to ride

[@mrmackee123]

The memories here😭😍

[@dionoliveira4058]

Great to see someone give it full send like I used to mine all the time....I had the exact same colour and remember selling it eventually 35 000 ks later for more than we paid.

[@TheCaibacraft]

here in portugal a lot of people install a 100cc big bore kit as well as 16 inches wheels, and make those things not only look amazing, but also make them go as fast as 160km/h, that's about 100 mph

[@joaocunha3824]

True

[@ricardobettencourt4468]

@Shield Liger search Baracing on KZbin , and go see the orange 100cc DT , it does more than 160km

[@ricardobettencourt4468]

@Shield Liger search and see by your own eyes

[@ricardobettencourt4468]

@Shield Liger pls, my DT is around 70cc and it does atleast 110km , its using just a 19mm carb , modified eletric , firebox exausht , und 13/44 , go search Baracing and see a 100cc doing almost 40hp ,

[@ricardobettencourt4468]

@Shield Liger kzbin.info/www/bejne/laqod3qXfKaleac

[@burnheretic3950]

I think that looks pretty snappy for a tiny 50cc. Looks like perfect power for running around town. 👌

[@princher]

Usually with 50cc dirtbikes or Scooters is that they are restricted. Not only restricted but also sometimes the boring of the cylinder is way smaller. With these 50cc Mopeds the boring is usually around 40 to 42.5mm, no restrictors either, causing them to be much faster than expected from a 50cc.

[@coolvideos8864]

My first geared bike! Went to see how much they go for again recently and there now a classic and demand high prices.

[@Arnold-ln7ij]

I thought that was the bike starting XD 2:00

[@EreksonJ]

😂

[@EnduroLifeHungaryOFFICIAL]

stupid xDDDDD

[@kofot5276]

Hahahhahaha 😂😂

[@victortakflakt]

If you're looking for more power, Finland and Sweden has amazing mods for bikes like these. You can basically do what ever you want. If you really wanna go all out you can even turn it into a 70cc.

[@EreksonJ]

I was just looking into removing the snorkel and jetting the carb. I wish I could find a good pipe with the stock routing, to keep it away from the ground.

[@EreksonJ]

Where can I find these parts?

[@victortakflakt]

@@EreksonJ Well there's a few different websites. Trimbutiken.se Rinab.nu Skoterdelen.com Rexxysmopeder.se There's more websites then that but you should be able to find some good modifications for it. If you do put our your money and install the parts properly the 50cc's can get up to 80-90 kmh.

[@EreksonJ]

@@victortakflakt I hope I can get even more speed than that. The speed in the video is mph, which means I can already do about 80-85 kph.

[@victortakflakt]

@@EreksonJ Not alot more if you already doing 85 to be honest. With proper tuning it can go up to about 140 though. That's with like a 86CC Cylinder a new pipe etc...

[@danielcline7413]

This bike was designed as a European moped for the cold of Europe note the heated carburetor they are usually sold in what they call the dirt package to the USA headlight all the charging system but no taillights or turn indicators only made this model for two years

[@EreksonJ]

I wondered about the heated carb. I actually blocked mine off to try to get a colder intake temp.

[@danielcline7413]

@@EreksonJ I've seized up the bottom end on a few two strokes wierd fact the top end seizes when it's hot outside I've trashed three bottom ends in the cold so if you ride any distance in the cold hook it back up about the foot peg when I got the bike it had a dent in the tank no gauges I'm sure they were broken off the rear wheel was trashed some body jumped it the peg snapped off on landing glad it wasn't me the older gauge set I put on gos to 80mph even though it won't go that fast the low compression is good for a high revving engine it will run great on the shittiest gas I use Yamaha race lubes 35 to one mix one step hotter plug you'll have to clean your tail pipe assembly once in a while because the muffler parts will accumulate oil and it gets louder for some wierd reason the sound of this bike sends the deer running and I rejected the carb has much lower end power now the front sprocket12t to much 10 to little try 11t what about the light to let you know your kick stand is down cool huh

[@danielcline7413]

@@EreksonJ also except for and old bultaco this is the smoothest suspension on county dirt roads I've ever owned floats across washboard like a caddy and the best drum brakes I've ever used when I bought mine they thought. It needed a new top end because of the 6.5 to one compression so I got a new piston and stuff in the deal even though the bike was very low mileage you can start it with your hand brand new once agian I'll mention that the low compression is intended and let's you run this bike at close to red line all day without blowing it enjoy it if you find a replacement led head light let me know that brake light is a real headlight killer and it's way to easy to out ride your headlight beam I can't go over 20mph at night safely

[@dannysport5]

I've got one too same colour combinations just the EU edition since 1996 and will be forever the one ❤️. You have an stonishing bike please do believe me.

[@mrmoon1482]

We had the air cooled DT50 in the uk back in the 80s and 90s it only reached around 35-38mph, we did have the 125lc which we could ride at age 17 though 🙂

[@GandaMelgao]

In Portugal and Germany (at least) the air cooled produced only 3hp. So, yes.... 60 km tops. The LC produced 7,2 HP. Quite different indeed.

[@pikkumisee]

i can tell you that this video is about to blow up soon

[@EreksonJ]

Cool! Did it get posted somewhere? I figured it would be kind of a niche, unique video that might get some attention...

[@pikkumisee]

It was on my rekommends :)

[@lengaming1651]

Not*

[@pikkumisee]

@@lengaming1651 khöm

[@lengaming1651]

@@pikkumisee ?

[@Nicedicekid]

I just completed a total rebuild in my living room. Haha watched this so I know what it should sound like before I kick it over for the first time !

[@danielcline7413]

I own the same bike starts every time love it don't off road a lot or jump it right foot peg needs a gusset. mine will do 65mph at 5500 ft in altitude don't mess with the compression instead concentrate on your jetting to get more power

[@danielcline7413]

@@martijnvrieling538 parts are still available from Yamaha dealers if you need any tech advice I'll help if I can

[@danielcline7413]

@@martijnvrieling538 are you in america just about any yamaha dealer can get the majority of engine and other parts like cables and stuff if you need a gas tank or a fender or something like that they are a little harder to find I've seen several parts bikes on e bay maybe Craig's list

[@danielcline7413]

@@martijnvrieling538 I went back through my comments and somebody recommended a swedish site called two stroke might. Give it a try

[@danielcline7413]

@@martijnvrieling538 that's all the info they gave haven't looked myself. Like I said before I have had no problem finding engine parts and stuff like swingarm bushings cables levers. And stuff like that from yamaha good luck being in europe your chances of finding major parts should be much easier as the majority of these bikes were sold in europe good luck and as I mentioned before I'll be glad to help with any tips I'm not an expert but I've learned

[@danielcline7413]

@@martijnvrieling538 ps the biggest mistake is believing it has no compression at 6.5 to 1 you can start it with your hand it's this low compression ratio that allows such high rpm and it runs the best on low grade petrol

[@winneyjr9861]

I’m from England and have no Idea where this is filmed, but I have to say that wherever you live it is beautifal

[@EreksonJ]

Thank you! It's Utah, United States.

[@KirCon267]

it was 1995 when I ride from a friend this little beast.i remember my hands paralysed from the acceleration ..I was a 15 year old kid ..😅😅ahhh memories..

[@barbar7580]

A good friend of mine has a Yamaha DT 50 R 1989 5 speed (first year of the german model) originaly it is extremly restricted to ~50km/h to be considerd as a moped under german law and be sold as one but with a few simpel upgrades like a bigger carb (16mm->17,5mm), an aftermarket sports ehxhaust and a bigger gear in the front it easily goes 90km/h, extremly fun to ride because it's power is pretty easy to control but still enough to rip through the woods

[@stephenpollitt5195]

tool kit on the side. the steering lock saved mine.

[@joshloveslax2136]

I'm 14 and in Canada we can ride mopeds with just a normal Lerner's license and I got a 1994 model dt 50 and put a 70cc big bore kit in it

[@fright3339]

Josh loves lax where in Canada? Haha same here buddy!

[@joshloveslax2136]

@@fright3339Alberta!

[@fright3339]

Same!!! Shoot me a Facebook message! I had a few questions about yours! Nick Fright- facebook

[@joshloveslax2136]

@@fright3339 will do

[@MrDavilss]

How does the 70cc kit person, bro? Is it the parmakit one? Regards.

[@luddechamp]

cool, i might buy one of these

[@coolstorybro9946]

Cool bike you have bro! Take care

[@exkingsmeadchef]

loved mine in '89 could rag it around and no speeding fines super fun bike.

[@jaandamy]

1st motor bike i ever riden and enjoyed it

[@GiorgosC-rp5ms]

is a 1988 yamaha dt50 all original 1800 miles like brand new identical to this one worth 2000.00?

[@paulorilho4026]

Dt lc portugal n1

[@proelitjump1355]

Mesmo, tenho uma dt 125ac. É uma das melhores enduro

[@noahblick1873]

Hey im from sweden and i have a dt 50 too but in sweden they only do 30kmh so i wonder what mm is the carburator and what cc is the cylinder Is yours? Pls answer soon

[@EreksonJ]

I don't know about the carburetor size but the cylinder is the stock 50cc. I have not done any modifications at all.

[@TheLecaro000]

I had the same with golden rims. DT50MX. red/white. awesome moped. in Germany it was cylinder-aircooled. What we here see, is a DT80 with a 50ccm Motor, thats amazing, not available in Europe. Strange but cool.

[@Vaethron]

ja die dt80 ist quasi baugleich mit der dt50lc. Damals war aber der 80cc hype höher, (da sie in der versicherung unverschämt günstig waren) bis die ganzen jugendlichen zuviele unfälle hatten. dadurch wurde die 80er versicherung dann unbezahlbar und die leute sind auf 50er und 125er umgestiegen alles mit Führescheinklasse 3 (heute b)fahrbar gewesen

[@simonmcourt]

Had the honda mt50 (snail)Not bad..luckily it siezed so got the honda mbx 50..the difference in speed.was amazing..super fast.100kmh no problem.Super dt 50.

[@JenniferGonzalez-gx5qv]

Love this 🥰 my first bike

[@theodorhildingsson3654]

So beautiful bike

[@danielcline7413]

In case your wondering because of the right footpeg snapping off on the previous owner I had to replace the gauges with ones from an earlier air cooled dt

[@1972mercurycougar]

They made a DT80, same platform, in other markets. 2strokes rock!

[@_unreleased_977]

Man here in Portugal we say that those are mythical, and we just kit that thing out whit 100cc engine no lights no speedometer only some handlebars levers and grips, almost no plastics. It's so light that whit only that 100cc 2stroke engine the wheel comes of the the ground on EVERY GEAR!

[@_unreleased_977]

Want some prof? Search BARacing on youtube and you'll see

[@paulc43]

goodlife 4ever I think those are the am6 engined ones. Not the Yamaha w17. I’m about to get the older and it doesn’t look like there is much tuning support.

[@miguelteupai636]

@@paulc43 he is talking about dt lc with the square cylinder, am6 comes in dt50r and dtx 50, dt lc is the one with square cylinder, here in Portugal they are very tunable and some reach about 160 kmh (100 mph)

[@christopherwalker6056]

That's like a step above a Honda spree or Yamaha Razz. And to try and ride it on trails, it's probably okay as long as you're on hard packed dirt and FLAT ground, cause I can't imagine it would have enough power to go up a hill that's any steeper than about a 25° angle.

[@johnkowalski9875]

Had this bike as my first dirt bike. I loved it until my buddies started getting KX, RM, and CR 80’s….. then I felt like a loser on it lol

[@guiltygearcore]

Hows your DT 50 sir? I just bought the same DT 50 model same as yours but it needs some work in order to get it back to its good running condition.

[@emadartist]

Don't install a big bore on your DT, it is pretty fast for a 50cc and I think that it is enough for a bike of his size, also, big bores reduce reliability and the brakes won't be enough to stop you if you're going faster than 55 mph. It's my opinion, don't judge me. Ps: If you keep your DT stock it will increase the sale price a lot.

[@Vaethron]

here in germany the dt lc2 and lc1 are stock 80cc. the 50cc versions are aircooled and look differnt. the engine can handle it very easily

[@eroshtik6997]

Wow great motorcycle . this bike is good for 5.6 height?

[@karlnapp7564]

You can get a 70cc tuning kit for it online for about 180 bucks.

[@gntr77]

I had one same 88 model my dad got for me wen I woz 16 wen got my 50 cc bike license with dads signature 😂😂😂greek Law’s if you still have it find proma exhaust front to back or leovince you will see a lot more of power change the chain sprockets 13 front 48 back and enjoy 👍

[@giorgoss_gr7720]

Καλό ήταν φίλε επειδή σκέφτομαι να το πάρω

[@gntr77]

@@giorgoss_gr7720 η απόλυτη φάση 🤣🤣έχει πόλη χαβαλέ το μηχανάκι κ μπορείς να το φτιαξης ανταλλακτικά υπάρχουν πολλά

[@daniellee9849]

awesome. i just bought one a couple days ago. a 1990 with , 1500 miles. have you found any aftermarket exhausts? or any other power adders?

[@EreksonJ]

I decided to keep it stock. It's such a rare bike and it's so clean, I'd hate to do anything irreversible to it. I did do just w couple things though... The carb is heated from the engine coolant. I deleted that just to make tuning the carb more simple. I also removed the airbox snorkel and jetted the carb for my elevation. I didn't notice much of a difference though, except the throttle response improved when I tuned the carb. Otherwise, I'm just enjoying it for what it is.

[@jasona9393]

@@EreksonJ Yes, definitely keep it stock: The performance was superb even in stock trim. I agree with the idea of not messing with it.

[@paulawestcott7228]

@Daniel Lee Hi, I installed an FMF pipe (get the one for Yamaha YZ 80 1986) on mine with a Procircuit 304 silencer. You will need to cut the manifold from the original stock pipe and weld onto the FMF. The original FMF pipe manifold needs to be cut and tossed. Take it to a pro exhaust shop have them set it up for you . Also add a Kehin 20mm carb with a UNI pod air filter. I can send pictures of my bike just text 808 352 4687 title yamaha DT 50. Happy to help you.

[@paulawestcott7228]

Hi Daniel the FMF yamaha YZ 80 1986 pipe can be installed but ther is minor cutting and welding neeed . I have on my DT 50 LC 88'.

[@kd350]

Hey folks. I bought (traded my Seca 650 even) 1989 DT50/LC in bumblebee in 1991 as a new leftover from my lifelong dealer. I've had it in service since then and instead of bragging how little milage, it's time to exclaim the 10,371 miles on it now. The head's never been off, so that's original rings and bore etc. If you average a 10 mph speed that's around ONE THOUSAND HOURS of use. There isn't a rattly YSR 50 in existence which can claim this, I'm betting. I pour over overpriced YSR ads and rarely is there one even approaching 4k miles with out some YZ 80 motor replacement. I've geared it taller with a one tooth countershaft sprocket and have had to replace the seized and cracked swing arm on the cheap from eBay. The frame also rotted in front and I had a local legend welder do an incredible fabrication. I'm on like my 5th exhaust pipe. The factory replacements were made of real rottable steel stock and am better off on eBay acquiring OEM but rusty ones. I even got a 63 in a 45 mph speeding ticket on the thing. Fun fact: These were the ONLY completely street legal liquid cooled two stroke enduro ever sold, of any make or displacement in the USA. More features than the XTs; tachometer, 6 speed, monoshock and real, instead of goofy scoops on an air cooled dinosaur, liquid cooling.

[@midwestmotorbikes2696]

I really wonder how the dt50 was presented in the American Yamaha dealerships because I would imagine you would see multiple bikes of different displacement of the same line up ( yz80, yz125, yz250 etc) but I don’t think they sold a dt80lc or 125lc in America

[@Kinp1y]

I am 12 and my grandpa got me one of these 1988 Yamaha DT 50 liquid cooled and mine in the past has been beaten to Hell it has 58,000 Miles and there’s only one blinker that’s still on it one of the mirrors is missing and the speedometer Cable is for some reason not on the bike

[@мирныйвоин-т1в]

what rails are in the fork, where can you buy them,?

[@torque-aholic5039]

Just got one about a year ago and trying to get it right for my 15-year-old son. Done a bunch to it but wondering why it likes to run close to the red on temp? Someone who might have owned one would be able to tell me please please

[@gilaaa]

i wanna get a dt 50 but its hard round here to find a decently maintained one for an affordable price

[@EreksonJ]

I didn't even know they existed till I saw the ad online. I knew I had to grab it. I love it!

[@gilaaa]

@@EreksonJ theres also a dt 80 & 125

[@daniellee9849]

i never knew they existed either. just picked up a 1990 with 1500 miles. rins and rides great. actually rode it about 40 miles home from where i bought it

[@djmojo5]

do you know what sprockets you have on in. you seem to get a little more top than mine. also curious how your taller gears do in stop and go???? thanks

[@EreksonJ]

They are the stock size. It's everything I can do to keep up lol.

[@andrewlaister2607]

I was bought one in 84 on leaving school great bike but could never get it to do more than 35mph

[@DennisH22A]

They made the liquid cooled one in 87 and 88 only. That's the 7hp one. The regular air cooled one is much weaker

[@camaramanoel]

Where in the world did you find a DT LC 50 in the US?!?!? Been looking for one of these forever!

[@EreksonJ]

@@camaramanoel in Utah. KSL classifieds. I've seen 1 or 2 others pop up as well. I sold mine otherwise I'd offer a deal to you. It was a fun little bike and I'm so happy I got to experience it for a few years.

[@camaramanoel]

@@EreksonJ awesome! I thought it looked like Utah! I've got to keep an eye on KSL. This was the bike of my youth! Out of curiosity, how much did you pay for it?

[@EreksonJ]

@@camaramanoel $1,100 on a complete impulse buy. I saw it and had no idea they existed and I had to have it lol. I sold it a year or two later for like $1,400.

[@paulawestcott7228]

Great bikes, I am on my 3rd one, first one the year they came out 1988. Can give tips to make more power ..lmk.

[@JohnnyLee8355]

Premixed and using the oil pump, how's the smoke?😂

[@LocalAutist]

Is this a constant mesh transmission? Dont know what constant mesh means but I do know that you can shift them without the clutch, which is why I'm wondering :)

[@EreksonJ]

Yes, it is. I still use the clutch though because it reduces wear, and reduces the possibility of bending the shift forks.

[@starfarmer716]

my first enturo..with aftermarket exhaust was going 13.000rpm

[@daniellee9849]

also, what does yours idle at when warm? mine is idling at about 3k rpms... you think carb issue? this is my first 2 stroke anything besides a weedeater. lol

[@EreksonJ]

You can easily adjust the idle on these. I did have the idle set at around 1k RPM but now I have it set higher - around 3k RPM. I did this to make it quicker to bring the RPMs up to accelerate when the traffic light turns green. The only down side to having such a high idle is I've noticed it starts to build heat when I'm not moving.

[@c0lterg3istl74]

Cool video but damn man you're smokin that clutch something fierce.

[@EreksonJ]

Gotta keep it in the power somehow lol ;)

[@adambrown8414]

I recently got a 1983 model needs some work tho but they are nice bikes

[@crossy7225]

I had a rd50 my best mate had a dt50. I absolutely smoked him on the straights. He could pull 42mph mine was good for 45🤣 so much freedom for a 16 year old. Treasured memories

[@muratboyvadaoglu907]

what state is this?

[@totalkarband]

I had a Dt80lc2 with 100cc Polini.

[@jaywallace4395]

Me and my mate used to nick these out of sheds back in the 90s now there rare

[@US--hk7sw]

Are u full origine ?

[@soss17beatz87]

How fast does your go?

[@marcus7101]

Is it stock in this video??

[@EreksonJ]

Yes

[@simonsvensson2682]

What kind of speedometer you have on the moped can't find the same

[@EreksonJ]

It is all original

[@simonsvensson2682]

@@EreksonJ ok

[@torque-aholic5039]

By the way thank you so much for the vid

[@monstergarage1768]

Does he have a speed limiter? At me on 5 and 6 it seems to start to slow down, it goes in the same mode

[@EreksonJ]

No speed limiter. It just doesn't have a lot of power to go any faster.

[@tonebfcru]

Is It possible to engine swap this with a dt 175 engine? (same year)

[@proelitjump1355]

I dont think so, both bikes have a huge size diference

[@jonteberg3481]

The Swedish site TwoStroke have everything i man everything

[@EreksonJ]

I think I found it, thanks! I'm trying to figure out what is compatible. It looks like the sweedish bike got liquid cooling in 1998. This bike is a 1988. I wonder if the parts fit?

[@certifiedpistonhead9641]

@@EreksonJ they should, same bike and probably same engine just a difference in cooling

[@Op1zilla]

Fun 👽👍✨

[@h.b.l]

Very good

[@c52ned]

At 2:00 o wonder is it eléctric start

[@braulioconceicao7647]

Top speed?

[@DoNE021]

In Sweden the Yamaha DT50 50cc have 1hp 30-35kmh topspeed and 3speed. No wounder why people tune them up with a 50cc 5,5hp or the 60-70cc and bigger 20-24mm carb and intake

[@lehypaheroo1991]

How much one of this in your country

[@BJW-010]

How many gears has this one?

[@EreksonJ]

6

[@jerramcyrusgambe9700]

what country is this ???

[@EreksonJ]

U.S.

[@US--hk7sw]

Max après?

[@danielsalazar4912]

I got that bike this month and i really want to rebuild it and bring back to life.. Plss anyone can sugest were to buy some parts of it?

[@paulawestcott7228]

Go online yamaha OEM parts if in he USA you will find most parts. I have a white gas tank Yam DT 50LC can sell it. Reply by text here 808 362 4687 Yam DT 50 . Great bikes take care of it.

[@RadactPotato]

Hey, just wanted to tell you that, because it's a 2-stroke, don't engine break! The piston won't get proper lubrication (if it injects the oil into the carburator). BTW, i also have a DT50, but it's just newer. Mine is from 2008.

[@eman8209]

Someone Youdontknow that’s only with bikes that run premix oil injected you can engine break all you want since the oil is injected without the gas but with premix when you engine break there is no oil lubricating the piston I have an rm 125 and run premix and I don’t engine break

[@lengaming1651]

The oil is injected between the carb and cylinder, right before the reeds.

[@lehypaheroo1991]

Where in Japan I could get one of these ?

[@lengaming1651]

It would be pretty hard or even impossible for someone in japan really. The DT50 was only sold in europe and some other countries. Here in scandinavia, there a lot of these, but the mx and mx2 editions as well. I have a DT50 mx2 which i recently got from my dad.

[@lehypaheroo1991]

@@lengaming1651 dude how much in your country???

[@lengaming1651]

@@lehypaheroo1991 I usually see them for sale from 750€-1800€. But those are the ones in relatively good conditon. There are a lot of trashed/rusty ones, which are tuned and totally illegal to ride, for around 300€.

[@lehypaheroo1991]

@@lengaming1651 dude can I buy a packages of rusty one in your country? Then I’ll renew them ?

[@hmn_ari9873]

Origin?

[@CViehl-du4us]

How big are u

[@iris-dh6nd]

I'm 5'8/5'9 and that bike is a quite big i really have to use my legs to kick start it to make sure i don't drop it lol

[@motocrosspk]

Got the same one in blue...

[@leon.690sm9]

i swear this thing does not have the stock 50cc 40mm bore cylinder

[@soss17beatz87]

Man that mountain view is beautiful where were you?

[@Virtuoso23]

7 HP is pretty cool for a 50 cc.

[@longknose8751]

I have one and I am 15 but it has zero compression but I have a parts bike that I am going to take the head off and try that

[@alexsky88749]

Isn't that the motorbike John O Connor used to flee the Terminator when he was a teen ???

[@EreksonJ]

I had to look for the scene to see. I think that was a honda xr100

[@stafgovaert852]

Yamaha dt 50 mx is very sensitive for high rpm, dont do it to much, otherwise your compression will go down fast!! Then you need a new cilinder, wich you won't find.

[@TheGamersXD]

Btw you should of waited for the push then a bit after you gear up

[@garychilds1130]

Running two lots of oil will probably give you a week mixer and make your engine overheat