Yamaha Enticer 540 Long track Ep #7, steering install and more!!!

[@johnathanyinger]

I love how in every episode you sit on your sled build and give the thumbs up! She's ready to go boys!

[@toddgrant6103]

Did the same thing about 20 years ago but I used strut ends off a Phazer welded to the original cross tube at 17 degrees. I used a bell crank under the engine to change the direction of the steering so the skis went in the direction of the steering. Good job, a lot more complicated than mine was, for sure!

[@Flatlander11]

I've literally been refreshing my KZbin video feed for the last hour waiting for this! Thanks again Louis

[@skyb8687]

A little mineral spirits will remove that Polaris insignia off that seat,(keep that enticer look)unless it's embossed.done that a few times when swapping crap,love the build, y'all seem like cool dudes,thanks from the snowy state of Montana!

[@dannydoall9181]

finish the sled !!!!. I've been on old sleds my whole life and of course having a old sled one of the best things is working on it . really cool to see someone zombie one out and make a new killer sled . keep up the good work

[@karlgilbert8255]

this build looks like alot of fun, cant wait to see it throwin' powder!

[@evanshears6643]

I'm also surprised you're not putting a riser and new running boards on this,

[@evanshears6643]

I think you should build a hoop for the steering so you can out a riser on there cause that looks uncomfortable as hell, and maybe mod the seat bracket to bring that up a bit?

[@groovymoon]

You must be obsessed to do that to an old 2-stroke enticer... rock on dude!

[@DoubleOJoe]

Cant wait to see that thing run !!!!!!!

[@tystensland204]

Allways watching even in 2019

[@justinmccafferty3346]

Such a sweet build, love these vids

[@Fahla11]

im doing a top end rebuild my self,but it can wait.this is more fun.

[@ericthompson9826]

For the front you should make a grill and just put a 12 inch light bar on it.

[@danielhart471]

They did on my enticer, but the hood was already cracked The weakest part of the hood will be right were it mounts up in the front

[@kyleshehorn4541]

Hey Louie .... You should do a power mod on a 06 Polaris fusion , thats what I ride and I want to see someone else do something great to a great sled

[@marinemodz345]

It's looking very good keep it up

[@ARCTICMAN57]

Pretty clean welds 👍

[@jlucasound]

I left a comment in a previous episode wondering, "How, again, is this a Yamaha Enticer?". Now I see. You have maintained the basic appearance but now it is on Steroids. Great Job, Louis!!

[@dfuller968]

Any engineering offers from Yamaha yet Louie??? Would the bracket from I think its a 76-77 exciter be the same bracket Louie? If so I can probably get it for you.

[@MX-tu8mr]

TURBO IT!!! turbo on the tunnel? That'd be pretty good

[@patriqcnewman275]

Are you going to finish it

[@bigyamaha5090]

can't wait to see it in action

[@ryanlagoda1352]

You remind me of Clark Griswald..awesomeness!

[@ericm1430]

most badass enticer ever, one day ill buy another one lol

[@thomasvantassel3347]

Got any ideas for a 1989 ski doo citation mod

[@94gokart]

Nice build Louie

[@mitch5653]

Power modz. ....u should deff try making a hommade pipe n can!!!!!

[@delosturner2344]

can you make a lift kit for the hood? Just raise it tow to three inches. would make it looks mean. I know you make hoods and things. Good luck

[@evanshears6643]

Looks so cool though! Might have to do one myself

[@coenwinter350]

love your videos dont worry about what the other people say

[@coenwinter350]

one question though why don't you just weld the screwdriver into the reverse mechanism

[@sledneck182]

Louie, weld a cross bar on those handle bars! Or you'll be riding home with broken bars!

[@nothingrelevant1497]

You should have welded the reverse handle to the reverse

[@zoomrc1516]

What brand and model is the lift?

[@jdblaster5154]

What kind of seat are you running and will it fit on my Indy 500

[@alankarvel441]

lmao.!! i love it.!! this show.! you rock i love watching this stuff.!! i just want some snow.! so i can ride.? lol,lol.!!

[@TheSomewhere68]

I love it.. badass ditch banger..

[@jefferyschirm4103]

With all your skills have you ever thought of putting two sleds side by side using joy stick type controls and make an awesome mini track vic. out of some old sleds.

[@evanverret3150]

Hey man, where can I buy you stickers?

[@smartukicpi]

How Mutch ?

[@AjackLee4]

Keep them up!

[@cellamite]

LOUIE DUDE< YOUR A LEGEND< THE ELAN NOW THIS~?!!?!

[@ttemple8891]

I love this weapon !!

[@slimjim119]

it's looking good

[@stephanedesjardins2278]

More of this type of cinematography!

[@sleds7283]

i just got a 250 last year and im unsure if i go hard on it will the headlight and vent pop out of the hood?

[@coryraddysh6110]

No it shouldn't i have a 340 enticer and it is in their good

[@yveskc1]

Better than new!

[@justinpatten6898]

Love that enticer 👌

[@badmama4]

you should see my yamaha bravo,it has 1994 phazer front suspension and 1999 500 venture rear and 04 venom 600 skis. this is my wife's acct. don't have email. but if you want to see maybe reply to her email ill get picture send to you. got the idea from your shows like the enticer build,keep up the good work 👍

[@smartukicpi]

How mutch ?

[@PhazerboyProductions]

Hey, i got a bit of a problem on my F7 Firecat. It fires up when i put fuel in the cylinders, but it just dies right away, which will say that it doesn't get any fuel. I have checked all my fuel lines and they are all intact. What can it be? :)

[@Fahla11]

fuelpump.u can test it whit a 12v battery.or the smart valve in the gas tank is closed.google is your freind.

[@PhazerboyProductions]

Now i got the total opposite problem. It gets too much fuel. Pulled the plugs out, and took some pulls in the pull cord, and it just pours out like a fountain out of the cylinders with fuel. Any clue what it can be? ______________________________ Lite irriterande att när snön först kommer, så ska allt gå åt helvete :p

[@Fahla11]

+Phazerboy Productions vet hur det känns.min nöp/skar efter 8km nu i vintras.pröva ställa frågan på Snowmobile.se.är medlem där. 100% på att det är bensin,så det inte är kylarvatten som läcker in.

[@PhazerboyProductions]

Japp, får göra det :)

[@elijahnielsen2953]

hey louie! i have a problem with my 97 formula 500, it will run perfectly fine but it keeps burning headlights, taillights and the lights for the guage cluster, ive checked every single bit of the wiring harness for a shortage or bad ground but cant find anything, could it possibly be the voltage regulator?

[@Outdoor_power]

+Elijah Nielsen it is 100% the voltage regulator, check your grounds as well

[@elijahnielsen2953]

+TheBoatingChannel alrighty thank you very much, thats what i was hoping it was but wasnt totally sure

[@PowerModzOfficial]

+Elijah Nielsen yup volt reg.

[@elijahnielsen2953]

PowerModz thanks for replying!

[@Allwheelzdirty]

+PowerModz hey I just rebuilt my 1985 yamaha excel 340 but it sucks at turning ..

[@doppler3237]

man thats steering is a cluster---, why didnt you just use a piece of teleflex?

[@613repforme]

you should buy a portaband

[@suzukiman650]

Love it!!

[@kyletoomey9280]

You remind me of a young chevy chase

[@ccliff6677]

yes i have your left footrest brace,i may have an address of a guy closer to you with a donor sled as well

[@zerofriends5592]

she lookin good boyz

[@paulmurphy9902]

good christian answer your all class power modz you must be canadian eh

[@mitch5653]

so awsome

[@nicholasct]

Enticer week!!!

[@schmedlywhiplash6267]

Give that Enticer to Larry and let em run er......😂😂😂😂😂😂😂

[@karlbuttler]

That looks like an old Free air hood..

[@Allwheelzdirty]

enticers are fan cooled

[@karlbuttler]

+andrew jeanveau Thanks, I know, I was just commenting that after he removed the headlamp assembly, it looked like a Free Air hood....

[@noahclarke4459]

hey power mofz

[@noahclarke4459]

k

[@turnerkoenigs9518]

Rmk seat

[@nickurban8549]

Hey Louie i am 15 years old and love you videos. I have been watching the for a couple years now i ride Arcitc Cats and have 2 sleds and make videos my self i would realy appreciate if you could check out my channel

[@jamespatrick5447]

first

[@markday4257]

Polaris