Quick video installing a pyramid seat cowl, yamaha comfort seat, lowering linkages and a carbon fibre tail light cowl on my 2016 Yamaha MT10.
Пікірлер: 51
@skippy8012 жыл бұрын
Thank you for this. Just picked up the soupys lowering kit for my mt10
@alextatourglou8532 Жыл бұрын
how did you go with them? did you adjust the front too?
@jasoneele66742 жыл бұрын
Sydney life now bro , superman is growing 👍🏼 doin good job on the bikes 👌🏼
@TheGingybeardMan2 жыл бұрын
Thanks man, yeah the little fella is growing up fast.
@f.t.w10662 жыл бұрын
Nice ride looking good 👍. Nothing like a little modification here or there..👍👍👍
@TheGingybeardMan2 жыл бұрын
Cheers mate 🙌
@nathankeele30722 жыл бұрын
Looking good man 🤙🤙
@TheGingybeardMan2 жыл бұрын
Thanks brother 🙌
@daniellang61128 ай бұрын
Nice job mate!
@TheGingybeardMan8 ай бұрын
Thanks mate 🙌
@belaniv3 ай бұрын
Hello, can you please tell me the part number for the original version?
@polyblendfamily91262 жыл бұрын
Nice man, good on you for not breaking lockdown
@TheGingybeardMan2 жыл бұрын
Thanks mate 🤙
@BigTruckRacing2 жыл бұрын
Job well done 👍 M8 , are you going to replace the rear tail lights ?
@TheGingybeardMan2 жыл бұрын
Thanks mate, I do plan on buying some better looking front and rear indicators 👍
@11SpeedFreek112 жыл бұрын
So in addition to the rear lowering links did you address the front end as well? Seems like lowering the rear and keeping the front stock the bike would tend to be lazy in the corners since changing the rake that way lends itself to more stable in a straight line at the cost of cornering ability. I am in the short inseam club as well so I may do this however I will try and see if I can do the same in the front end by making some shims to install inside the forks to lower the same amount, that way the stock rake is retained. How is the ride after the links, have you put enough time on it to know how different it feels in comparison to before on road with lots of turns?? BTW nice bike, I love mine.
@TheGingybeardMan2 жыл бұрын
Thanks mate, really the inch and a half drop didnt affect the overall handling of the bike. In saying that I don't do track days and push the bike to its limits. You could compensate by lowering the front forks in the triples the same amount but it wasn't an issue for me.
@ezekielchariot2 жыл бұрын
Some linkage suppliers for the MT10 suggest the front forks can also be slid up the triple clamps to level out the change, do you know if this is possible ?
@TheGingybeardMan2 жыл бұрын
Yes that sure is possible all you need to do is loosen off the forks in the clamps and push them up to the desired height 👍
@robertowen82814 ай бұрын
What is the lowering kit like for your handling? I may be getting an mt10 that is 30mm lower but i also track ride so i dont want to drag pegs or totally screw the handling
@TheGingybeardMan4 ай бұрын
I dnt do track days or get a knee down on corners so I never really noticed much of a difference for road use. Was much better for my height of 5'10" so I wasn't on the tips of my toes at lights
@markmt1070 Жыл бұрын
This is an older post but thought I'd ask! Now that you've had a year to ride on that new comfort seat, how do you like it vs the stock one? Worth the money? Does the seat adjust the riding angle?
@TheGingybeardMan Жыл бұрын
I sold the bike after 2 months of fitting the seat. The seat is much more comfortable and I definitely recommend it. The seating angle is similar to stock however it sits you about an inch higher.
@BaggerBro2 жыл бұрын
How the hell did you manage to get a comfort seat? I've had one on Backorder now for 4 months here in the states now. I went ahead and ordered one from Australia for almost double the price 😅
@TheGingybeardMan2 жыл бұрын
Was the only one left in stock on ebay when I purchased. I was super lucky to get it. Aus pricing is ridiculous
@ESPLRG2 жыл бұрын
Any more planned vids for the R1?
@TheGingybeardMan2 жыл бұрын
Unfortunately not, the bike had a blown head gasket. I ended up selling it
@ESPLRG2 жыл бұрын
@@TheGingybeardMan ah bugger, thanks for the reply
@BRUISER12 жыл бұрын
Is there another Harley coming anytime soon?
@TheGingybeardMan2 жыл бұрын
Negative ghost rider, unless I get donated one 😅
@BRUISER12 жыл бұрын
@@TheGingybeardMan 🤷♂️ So you got a donation 😁
@TheGingybeardMan2 жыл бұрын
@@BRUISER1 🤣🤣🤣 I wish, the MT10 was the same value as the sporty. Pretty much a swap haha
@carlmcgee36022 жыл бұрын
Where did you get the links and cowling?
@TheGingybeardMan2 жыл бұрын
I bought it all off ebay man. The links came from the U.K and carbon fiber cowl from China.
@mrconta2 жыл бұрын
what levers you ride with?
@TheGingybeardMan2 жыл бұрын
Just running some cheap ebay ones which the previous owner installed. The brand states they are evo1 levers, like an evotch knock off. Im looking at buying some better quality ones in the future, but man those ASV levers at $330 a pop are pricey.
@jxrdz_gaming1477 Жыл бұрын
So you only lowered the back ? I’m looking to get my mt10 lowered but I’ve been told to lower back and front
@TheGingybeardMan Жыл бұрын
You can lower the front by dropping the forks in the triple trees but I didn't feel the need
@jxrdz_gaming1477 Жыл бұрын
@@TheGingybeardMan I see, thanks bro
@aplest17852 ай бұрын
Does it ride much different? Since you’ve lowered it?
@TheGingybeardManАй бұрын
No sir I can't say I noticed any difference in handling with road riding. That being said I never did any track days where I truly tested the bike.
@jordanlake44432 жыл бұрын
What brand is the carbon fiber tail light fairings and where to purchase? Thanks
@TheGingybeardMan2 жыл бұрын
I bought it off ebay from a Chinese listing.
@jordanlake44432 жыл бұрын
@@TheGingybeardMan Did it hold up well?
@TheGingybeardMan2 жыл бұрын
@@jordanlake4443 yeah its definitely real carbon fiber, it didn't fit in place 100% and I took to it with a small file to wear down a few high points on the sides. Otherwise its really sturdy and looks nice
@arrinejed20384 ай бұрын
How Tall are you sir.?
@TheGingybeardMan4 ай бұрын
5'10" man
@randen40342 жыл бұрын
Soup it up, and go get your fxbb back
@TheGingybeardMan2 жыл бұрын
🤣🤣🤣
@1sinister802 жыл бұрын
Kinda ricer in a way. Cheap ebay plastic parts on a already very well built bike is a shame. But if you like it rick on. I have a A2021 Raven I ordered the comfort seat and the luggage. I got the luggage after 13 months but I'm still waiting on my seat. Love the MT 10.
@TheGingybeardMan2 жыл бұрын
Each to their own mate, the plastic tail light cowl which comes stock on the bike is also cheap plastic hence why they're notorious for breaking. The carbon fibre cowl is much more sturdy.