Yamaha Outboard fuel pump problem. Solution.

Good how-to video. Troubleshoot fuel system on Yamaha outboard engine. Repair or replace the electric fuel pump, fuse check engine location.

[@thomasnolan3274]

What a great video. Most people would have just showed you how to change the fuel pump but you took the time to go through the entire fuel system diagnosis. Very impressed. Thank you

[@raycone7692]

Your welcome.

[@YouSeeWhatiSee1]

Hey man, stopping in to let you know that this is a great video and has helped me better understand my F115. Ive just started going down the rabbit hole. Just wanted to let you know this video is still helping folks out in 2024. Also, 912 represent!

[@raycone7692]

Thanks for the great comment. I'm glad it's still helping folks.

[@gerardoramos382]

Lifesaver, and thank you. Outboard- 2008 Yamaha F90TLR Issue- upon starting, the outboard would shut off after 10 to 15 seconds. High pressure VST pump inoperable due to never being changed 257 hours (tested outboard for 20 min on land, ran great, bought this boat, and engine failed 100 yards into the water a month later on the first outing). No outboard experience for me however; I used common sense. Followed this video step by step during disassembly. I recommend that when swinging the intake manifold to the open position, keep an eye out on the pivot point as I had the the big intake hose disconnect from the air filter (every outboard is different based on the year). Most importantly, take a video of every step. I took 10 to 30 second videos. I took 2 hours to clean the VST out (used CLR) and insert new original parts (I did not pre-filled the VST pump prior to assembly but I did used marine grease lightly on the gasket). Once I put the VST back together, I started playing the videos from the last one to the first one in that order. I took all day Saturday to disassemble, clean VST, and partially assemble outboard. Putting the new VST was a little stressful yet; found fuel diagram online and followed numbered pictures (I TOOK MY TIME). I only used the lock washer from the old filter that locks the pump and the filter together. Sunday I had a friend assist me finishing up by connecting fuel rail, intake bolts, and double tapping cables that needed plugging back together. After all was assembled, connected water hose, pumped fuel manually by pressing fuel bulb, primed engine 5 times (stick key in ignition turn one click clockwise 5 to 10 seconds you will hear a low buzzing sound, once sound stops, repeat for a total of 5 times), ensure you turn the water on and crank that baby up. I recommend buying Marine Dual Flow Rectangular Outboard Flusher Muffs $15( This will properly flush saltwater outboards). Outcome- issue solved as the outboard ran for about 10 minutes and thoroughly tested. Next is bilge pump, lights, and ensure all safety equipment is up to date to be water ready. Great content video and yes you did help us.

[@raycone7692]

Great comment and I'm glad this video was able to help you out. Good luck on the rest of your boat.

[@dennyc1047]

Your a great instructor, calm , methodical and easy to listen to, thanks.

[@robertthomson1286]

Ray, This is unusually good video. I've looked at many over the years and this is definitely one of the very best.

[@raycone7692]

Thank you

[@jayalldayism]

Thank you for taking the time to make this video. You just gave me the confidence to diagnose and fix my motor.

[@tomhost5074]

Thanks for that thorough explanation of the fuel system! I wasn't sure how to proceed with troubleshooting my 115 but i'm ready now!!

[@raycone7692]

Glad it helped you out some

[@apackwestbound5946]

Great video, thank you. It was simple to follow your explanation. Nice job methodically working through the various components of the fuel system.

[@liemnguyen140]

You are a life saver. I have spent all day trying to work out whats wrong with my outboard. Now i know the problems and know how to fix it thanks to you. Keep making more video GBY.

[@raycone7692]

Your welcome. And yes I got to start back making some more videos.

[@thomasrogers9452]

Thank you. I just started to get my 07 90hp ready and it would not run after 2 years now. I know what to do. Great information great video.

[@joelwilliams6480]

Great video and very detailed. This may be the reason why I'm losing power when I throttle up my engine. Thanks again

[@jameseberstein]

Yes Big thanks to you for your extra effort. I have a 04 Yamaha 115 it has the same setup and the same issues with starting. On the older engine like this it is good practice to replace the rubber gasket fyi thanks again!

[@tomterrica4032]

Great video Ray. Thank you. It's guys like you who help us all to keep things running.

[@raycone7692]

Your welcome. If you feel like it please subscribe as I'm planning on making some other videos in the future.

[@Tsanders91]

I'm hoping this is what is wrong with mine. It's been doing the same thing as yours. It sat for 2 years. I've cleaned and blown through just about everything I can. Great video, very informative!

[@VICTOURVLOG-wv2jv]

Thanks for sharing your video, now i know where to start to fix my 90hp yamaha outboard...

[@raycone7692]

Your welcome

[@user-eo2qt2ri9c]

Excellent video and heart of a teacher. Wish I had half the patience and knowledge you do. Great job on the video not to mention the actual repair!!!

[@raycone7692]

Thank you. For the nice comment.

[@steveperez1178]

Thanks for the winterizing tip and for mentioning that drain bleeder valve on the bottom of the tank. I had noticed it and thought it was some kind of needle valve, and didn't know why it was completely closed, why it ported to the intake manifold, etc. Very helpful. Your mention of how to test the power to the pump at its connector with the test light helped me verify that without someone else helping. Nice job taking care to mention all the other things to look out for along the way. Keep doin' the Lord's work!

[@raycone7692]

Thank you for the great comment. And a big thank you for the last line of your comment. Be blessed and take care my friend.

[@tommiebrooks3687]

​@@raycone7692 why😮😮

[@tommiebrooks3687]

de

[@Mrkatt763]

Best video instructions details by details ever

[@michaelschneider2412]

Great video. So glad I found this. I’m having the exact same issue. Thanks so much!

[@floridasaltlife]

Best video on this topic that there is

[@raycone7692]

Thank you

[@montyhibdon3198]

Want to say thank you that was a lot of help I hope you make more

[@tedconder5382]

Great Video! Very Thorough and informative. Thank you for taking the time and showing us this. AAA+

[@coreypadron6735]

Thank you, thank you! I was getting so frustrated. You just saved me time, money and thrown wrenches. God Bless you a

[@raycone7692]

Your welcome! Glad the video helped you and may the lord continue to bless you as well.

[@yodadi00]

Perfect. Exactly what I needed.

[@yoyimarti2864]

Very well explained step by step..was looking for same video but a 225 4 stroke yahama BUT THIS GAVE ME A WAY BETTER UNDERSTANDING OF THE FUEL SYSTEM ..THANK U

[@johnstanczak5075]

See above..

[@TripGibson]

Another thank you Ray for a great video. If I made a video I think I would sound just like you. I'm an old lawnmower mechanic. I liked your comment on the float just like a lawnmower.

[@raycone7692]

Your welcome. Just try to keep it simple. Thanks for watching.

[@OnTheBiteCharters]

Great video, you clearly covered it all. Thanks

[@williecoleman2723]

Great video! Very informative.

[@boatfishingwithalananddan5271]

You are a good man, just saved me a small fortune. Thank you

[@raycone7692]

Your welcome.

[@arlisswirtanen7794]

Very excellent video, well explained! Thanks!

[@michaelfennell5313]

Excellent !!!! East to follow and understand

[@kimseymour8896]

Thanks this is one of the best videos on this subject good job

[@raycone7692]

Thanks

[@fredd2628]

Great video...Just got finish replacing mines (2012 F70LA) after letting it set up for over 6 months. Runs great now! As the video points out, if you got power to the vst but the pump's not running you prolly need a new pump. I went back OEM but that's just me. Thanks Ray

[@raycone7692]

Glad it helped. And your welcome.

[@onanysundrymule3144]

He'll Sir, I don't even know what a BST thingy is (or what it stands for) but that was so endearingly delivered, and with such good intent, that I felt the need to comment so. Kind regards.

[@DDay9000]

VST - Vapor Separator Tank, gets the fuel ready for the injector pump

[@johnstanczak5075]

Vapor Seperator Tank... It houses your high pressure fuel injection pump..

[@wadeballinger6877]

Best explained video I’ve seen !!!!!

[@ryanbuckner2405]

This was an excellent video! I’m having a similar problem with the 115. I hope it isn’t the pump because I won’t be able to get one before the 4th, but this was very informative. Thank you very much!

[@raycone7692]

Your welcome.

[@raycone7692]

Thanks and I agree on the gaskets.

[@johnhuff1887]

Thank you so much for this video. I was leary about attempting this job but I was able to get through it with this information. Back up and running!

[@raycone7692]

Good to hear. I'm glad it helped you out

[@jimhendrix2882]

Great video. Best I have seen to date. Is it possible to check the pressure in the vst to see if the pump is working

[@NSApple]

Thanks Ray! Helpful video.

[@raycone7692]

Thanks nick glad it helped.

[@jay101379]

A+ Job...have to do mine as soon as the parts arrive! Thank you.

[@raycone7692]

Your welcome. Just remember the bottom bolt on the intake manifold takes awhile to get out because you can only turn it a little bit at a time.

[@atmm89]

well done, hope this will help some one save a bucket of money

[@arkyhunter2750]

Great job of trouble shooting and explaining what you are doing.

[@raycone7692]

Thanks

[@clarencesail]

Thank you sir. Well explained, so well in fact, even I could understand it.

[@whiskeycreekbeach]

Best video ive seen. Thank you.

[@raycone7692]

Your welcome.

[@johnstanczak5075]

A few things... I have a F150 2004 , When you have to go through all the work of going into the VST, order the filter at the bottom of the high pressure fuel pump inside and a new gasket for the tank as well. That filter may look "fine" but it is such a fine mesh that you can not tell if it is clogged enough to cause bogging at full throttle at take off. No sense in having to go through this twice. Besides you may have to do this every 8 to 15 years. Also on the back of your motor ( external next to the VST on mine) is an U shaped device next to the water/fuel filter on the back of the motor, it is a filter too, replace that, as well as the main external next to it... I would install a 10 micro filter inline with the tank gas feed externally, I am doing this now, I wish I did it when I bought the boat new, a screw on filter is a hell of a lot easier to replace than going through all of this as the ethanol fuel is a pain in the ass even when using Stabil or Sea Foam for a fuel stabilizer. I have a 40 gallon tank that never goes on reserve which is at least 10 gallons or more. From now on I will pump all the gas out with a cheap electric fuel pump by disconnecting the motors fuel line and using this to pump out all gas through the reserve setting... If you do not empty your tank by running several times a season you will have always some old gas in your tank... My 2 cents worth...I wish I would have done the above many years ago...oh well...John

[@johnstanczak5075]

3:05 Main water separator/fuel filter and U shaped filters....11:39 Fuel injection pressure test point, schroeder valve, should be 45 psig when first on in 3 seconds......16:05 gasket for both halves.... 16:29 & 18:12 HP fuel pump filter, also notice varnishing internal from fuel.....18:21 clean off both halves of VST housing...

[@raycone7692]

Yes as already stated it is better to replace gaskets and filters as you go. And it is best to run non ethanol gas as well. Thanks for your comments the more comments the more it helps others.

[@justinellsworth6264]

Fantastic video! Super helpful! Thank you for taking the time to make and post. God Bless you too.

[@raycone7692]

Glad you enjoyed the video. Have a blessed week.

[@justinellsworth6264]

@@raycone7692 you as well!

[@KennyFishbone]

Awesome! Thanks for sharing!

[@stevedockery3534]

Thanks Ray, your video helped a great deal. Take care my friend. Steve

[@raycone7692]

Your welcome I'm glad it helped.

[@turdfurgeson517]

Sir this is the best video on a fuel system with a vst system on you tube. May I ask if you don't have power going to your get with the key in the on position, where would you look next? Checked the obvious. Neutral safety switch, lanyard switch etc. Just thought I would ask. But props to you. You should make more of these style videos for us diy ers

[@raycone7692]

Yes check the simplest things first. If you have no power to the switch. Definitely check lanyard it will get you everytime. If you have a power switch check it and fuses. Battery etc.. you may can make sure it's not in gear even if it looks like it's in neutral. Follow the fwd./ reverse cable back to engine and check. That's about all I can think of right now. But good luck.

[@raycone7692]

And thanks for kind words about the video.

[@RyanDyalRealEstate]

Excellent video. Calming voice :)

[@raycone7692]

Thank you.

[@DainichiKichi]

Good video, well explained.

[@raycone7692]

Thanks

[@TheBruhaba]

Thank you. Excellent video. Nice job.

[@raycone7692]

Thank you. Glad you enjoyed it.

[@paulagillikin742]

Excellent video. Thank you.

[@raycone7692]

Your welcome.

[@rtbkbulliesandpitbulls1714]

Amazing work, great explanation

[@raycone7692]

Thank you.

[@billjames7499]

Thank you for a wonderful explanation

[@raycone7692]

Your welcome I hope it helps.

[@abrahamvallejo4524]

Great video. Very helpful. Where did you get the after market high pressure fuel pump. Definitely dont want to pay original part price. Any info is appreciated.

[@taylorhoward3442]

Great video, thanks for sharing 👍🏼

[@raycone7692]

Your welcome

[@waltmarek5817]

Excellent step by step. TY

[@raycone7692]

Your welcome.

[@crispernator]

Gday mate this is a great teaching video to help others who have the same or similar problem always take photos because you can be sure the photo you dont take will be the one that stumps you i hoe when you did fire it up you have water running to it i didnt see a teltale maybe just the video .

[@raycone7692]

Your welcome. As you go along take many pictures.

[@BlowtheBridge]

Great video thank you!

[@raycone7692]

Your welcome

[@fredmartens7126]

Thanks for a great video 👍

[@raycone7692]

Your welcome

[@curlcd]

Great video!!!! Thank you sir!

[@raycone7692]

Your welcome

[@patrickdimig3435]

Thanks for the video!

[@raycone7692]

Your welcome.

[@overourheadsuas2063]

God Bless You Sir !!! Thank You !! 😊👍🐭

[@raycone7692]

Your welcome! May the lord bless you as well.

[@davidconner518]

Very helpful. Thanks.

[@raycone7692]

Your welcome

[@groundhog2002]

Good job.

[@AAAA-mk6lj]

Thank you , it helped alot

[@raycone7692]

Your welcome.

[@raycone7692]

Your welcome. Glad it helped you.

[@SaltyKayak]

Great video... great DETAILED video Ray. I have a question for you that I hope you can answer. 2 days ago I was cruising in from off-shore out of Ponce Inlet doing about 27 MPH in my Yamaha 115 - 4 stroke. Got almost all the way back in and the engine sputtered a couple times and then shut down. The air temp was around 95 degrees and the water temp is in the 80's. I had SeaTow pull me into the dock but the 45 minutes it took for them to pull me into the dock, I tried to start the engine 4 or 5 times and she wouldn't fire up. Then right at the dock, I tried it one last time.. and it fired up and fires up every time here at the house (New Smyrna Beach). Your assessment please as to the problem? Also, as a side note, my grandmother was married to a Clarence Cone and both are buried in Ft. Myers, Florida. Clarence was a WWII purple heart soldier and was wondering if he is part of your family tree?

[@raycone7692]

Sorry I'm just seeing your question. I really don't know. Could have been some trash in fuel filters etc. Or like your thinking could be some over heating problems. When my electric fuel pump went out you could pump the bulb real tight and it would fire for a split second and not crank. Then it wouldn't even try to start at all. Some people have even tapped the outside of there vst separator and got them to fire back up. And I'm not sure about the kin folk. I don't think we are.

[@frankleisure9337]

Had the same issue on my 2011 F-115 4 stroke as well. Haven't had a chance to diagnose the issue yet. Did you get your issue resolved?

[@curtkallai5350]

Great thanks although mine is a 2 stroke most of what I see is the same I'm going to try this thanks again

[@raycone7692]

I hope it all goes well for you.

[@busterworley8418]

I noticed your nice tidied up garage like mine.

[@raycone7692]

Yeah it's just a old half storage shed.

[@raycone7692]

Thank you

[@terryuyarak1413]

Thank you so much! All the way for the real North Pole in Canada.

[@raycone7692]

Your welcome. I'm glad it helped.

[@williemaglinti3060]

Great video lots of information i have a question i recently replaced the fuel pump but still doesnt want to start any suggestions

[@raycone7692]

No sir. Just make sure it's firing and getting fuel it should start. But I'm not a boat mechanic either . I just know a few things that may help someone out. Thanks for your comment. Sorry I can't help you out. Just hard to diagnose something that's not in front of you.

[@christiandebouvre1178]

Hello Great video. Very helpful. From what year is this motor ? Best regards Christian

[@bonthor7515]

This is the best video of showing step by step, something like this u will lose maybe 500 easy to boat mechanic. I do have a question, if the fuel filter does have fuel leak,like a Crack on the fuel filter, can that cause a no turn over also? Like it will just crank and crank like ur motor with the bad fuel pump problem also?

[@raycone7692]

I believe it would. If the leak is bad enough where you don't have the right amount of pressure to the injectors. Or it may lose prime in the system.

[@KingInukshuk]

I think this is the exact problem with my 115 Yamaha. It'll only start with starting fluid and is not getting gas for some reason. I'll order that part and will get back to you.

[@jbtieder9902]

Thank You

[@raycone7692]

Your welcome

[@onetime7539]

Took mine out the other day, 03 Yamaha 115. Noticed fuel on the top of the water once I stopped and cut the engine. Boat runs fine and the fuel seems to dissipate after a minute or so. Could this be an issue with the float valve being stuck open? I read that could be the issue but it’s a sealed system, how would the fuel get out of the VST? Seems like it would affect idle or operation if that was the case. Any other ideas on what I should look for would be appreciated. Fixing isn’t the problem, diagnosing is my problem. Thanks for the video

[@raycone7692]

There is a rubber gasket on top of vst separator crank and check and also on the low pressure pump. And like you said check bulb hoses etc. Check hose on vst also.check drain screw on bottom of vst. May can look around injectors too may have a o ring leaking. And your right maybe needle valve stuck.

[@chuggar33]

Great info. Thank you

[@stevenwoodyard1033]

Thank you for the video. I am in the middle of this procedure and can't get the bolt which is at the bottom of the right side of the intake manifold off. Any help would be appreciated. I can send a picture if you would like.

[@yodadi00]

Only thing that worked for me was an open end wrench and very small movement to get it cracked loose. Then it was finger capable.

[@fredgarvin4482]

what is the round shiny black thing mounted to the top of the VST tank?

[@duncangreen3748]

That is the pressure regulator. Here is a good labeled diagram of the entire system: www.boats.net/catalog/yamaha/outboard-by-hp/90hp/f90tjr-0410/fuel-injection-pump-1

[@weaselrodent7131]

good video i wish there was more i have 2015 F60 EFI motor and when i tried to drain the VST zero come out is there a way to get air in the unit to drain the fuel ? i run the check you show for the fuse and all fuse are fine and i remove the fuel rail line and turn the key and pump fuel in the bottle i had there i sure its a fuel problem as it starts fine the runs bad then stalls out do you know if i can get any error codes from the motor to find out if there and the problem there thanks for the video was a good help but i still having a problem.

[@raycone7692]

Yes alot of Marine mechanics have code readers that can tell what the problem is. I am not a marine mechanic I don't have a computer that I can hook up to mine.

[@michaeljdixon1]

Real Deal: Thank You

[@raycone7692]

Your welcome

[@frederickdavid204]

My low pressure pump was pumping, but was responsible for fuel entering the crankcase.

[@florianderobert5094]

Hi. thank you very much for you video. My Yamaha F40FETL VST separator is clogged once a year and need to be opened and cleaned. The other fuel filters are always clean as brand new. Do you know how it is possible, and where is the problem ? I think it may be due to a plastic pipe, but i didn't find the problem.

[@raycone7692]

I'm really not sure why it's getting clogged. If it is setting up for months at the time it will gum up and need to be cleaned. I use non ethanol gas to help prevent the fuel breaking down as bad. Also stabil fuel additive helps some. Draining the vst separator helps for longer storage. But the best thing to do is actually put the muff's on it and run it some every couple of weeks or so.

[@dbfrls]

Ray, very good video, I have a 40 hp yamaha 2015 that I believe the internal electric fuel pump has gotten clogged as engine has not been run in a year. Can you tell me where to order the aftermarket fuel pumps for yamaha 4 stroke? I will be following your instructions, and thanks

[@raycone7692]

Sorry just seeing this. I used highflow.com I ordered a quantum fuel pump. And they did stand behind there warranty. I did the same I let it sit without starting it up any. Contacted high flow and all they charged me was the shipping for a new one. Now if I don't crank it to often I will drain the vst separator.

[@ryanrowat6640]

@@raycone7692 Hi Ray, greetings from Canada. I think the website link above should be mwww.highflowfuel.com/ the other URL is for sale. Great video. My F70LA with 275 hrs. will start and run but not go above 2200 RPM while in the water (no power) and suspect this fuel pump. already replaced the filter & low pressure mechanical pump. hope that is what it is. might just be clogged.

[@raycone7692]

@@ryanrowat6640 it maybe clogged. Could be the filter on bottom of the pump as well. Or maybe the pump isn't seated properly. There is a port on top that you check pressure with a gauge. Maybe you can get a marine mechanic or somebody with a proper gauge to see if it is working as it should before hand. I don't know what the proper psi. It calls for you could probably google it. If that's not it maybe the injectors. But good luck finding your problem.

[@lb_aerial]

Thanks Ray. Does it make sense to drain the fuel pump within the VST tank too?

[@raycone7692]

It wouldn't hurt but the fuel should drain out. But wouldn't hurt to take the pressure off going to the injectors.

[@Ryboflvn1]

Hey Ray, I have a similar situation but I am not getting any power to the high pressure fuel pump. The fuses all have power, is there a specific relay that controls the fuel pump power or does it come from the main ECU?

[@raycone7692]

I'm not sure on that one. Sorry I couldn't help you out. Would say maybe check your kill switch real good but your getting power to the fuse's. Not sure if power goes to fuse's first then some where else before fuel pump. Let us know what you come up with.

[@the4hunters]

Wish I sAw this video a week ago

[@connerpressly8371]

What was the motor doing when you ran it? We’re you able to pump ball to keep the motor running?

[@raycone7692]

It would start for about 2 seconds and go down. But you could pump bulb and wait a couple of minutes and it would do the same. But I wasn't able to pump the bulb and keep it running.

[@brianmartinez761]

My engine does the exact thing , it just turns over but won’t crank to start. Could that possibly be the issue ?

[@kenduong1137]

Hello mr Ray, is that pump suppose to make a buzzing noise when you turn the key ? Mine is make buzzing noise for few second. Now its stop making noise and i cant crank it up

[@DainichiKichi]

Ken Duong I’ll answer for Ray, yes when you turn the key switch to on position it powers the pump in the vst.

[@CASSTONECUSTOMS]

Hey Ray, where do you get your after market pump from? Thank you!

[@raycone7692]

Highflow.com was a quantum pump around $89. Dollars.

[@taylorengler7764]

thank you for making this video i narrowed my problem down to my fuel pump and was looking for a video on how to free up a locked one because it was almost $300 for a new one. the site u mentioned changed the name to highflowfuels.com i found it there for $80. I'm gonna soak mine in some solvent and if it doesn't free up ill purchase one from there thanks again.

[@stevenwoodyard1033]

Taylor...I can't get to either site...any suggestions?

[@CASSTONECUSTOMS]

@@stevenwoodyard1033 www.highflowfuel.com/

[@taylorengler7764]

@@stevenwoodyard1033 i had an s on it by accident its www.highflowfuel.com/

[@sbwgaming4860]

Whats the small piece after the LP pump and before vst?

[@raycone7692]

I would have to watch video again to remind myself but I think there is a inline filter between lp pump and vst separator.

[@raycone7692]

I think there is a inline fuel filter between them.

[@tonylorenzo6709]

Do the port on the est sep suppost to have fuel coming out if I push the pin and if there no fuel coming what could be the problem

[@raycone7692]

The port on top of esp sep. Is where you should be able to hook a gauge to check and see if you have adequate fuel psi. I can't remember if you need to have key turned on or if you need to check it while engine is turning over. I am not a marine mechanic but I'm not scared to work on my own stuff. You should be able to hear your electric fuel pump come on briefly.

[@mattthepilot6283]

I'm having similar problem except i'm not getting voltage at the fuel pump. I get about .05 volts. I've read it might be the ECM? any suggestions? Thank you

[@raycone7692]

Can check fuse's if not there then I don't know anything about the ECM. Sorry.

[@mattthepilot6283]

Thanks for reply. Yes already checked fuses. Hopefully not the expensive ECM 😐

[@raycone7692]

Maybe not

[@user-wy5un3ej9s]

Amigo buenas tengo un motor parsun no arranca tengo chispa tengo compresión de motor pulsos ... Pero no arranca le eh probado con otra computadora y nada , le hago oler combustible por eo admision y arranca..que será

[@raycone7692]

Did check the kill switch ECT..

[@303storm]

So the fuel pump does not have a relay? I thought I heard one. Mine just died on me but the pump is new. The engine was under water and I fixed it all. It worked and now I cant hear the pump. I thought it was the relay.of the fuel pump.

[@ttabbles]

I am not a 100% sure ... BUT !!! I believe on most of today's modern ignition systems you cannot use a ground to test voltage to a component like the fuel pump. If you look at a schematic, you will see that the ground wire is connected in the computer module, and not to the engine block,, In Most systems today, the ground is switched or controlled by the Computer Module. Please someone correct me if i am wrong,