Yamaha Raptor 350 Carburetor Replacement-

Thank you guys for watching, Hope you enjoyed!
If you did be sure to like and subscribe - if you enjoy these types of videos please consider subscribing it would mean the world to me and yeah I will see ya guys in the next one!!!
Follow My Social Media’s-
Instagram- kevinriess_
SnapChat- Kevin_Riess

[@jeremiahcampbell719]

Could you post a vid of where the tubes are supposed to go

[@ChrisSmith-gn8qu]

*That "clicking" is actually backfire. Your bike is backfiring through the carb.*

[@oscarfigueroa1436]

Thanks for making this video! Great job man.

[@kevinriess]

Oscar Figueroa Thank you very much!

[@joebrown2634]

So the clicking noise what was it I've got the same problem

[@V-Angel]

what carburator did you put on it?aftermarket or the same as oem?

[@Satyrisci1]

@9:34 You can see the airbox is not connected to the carb. That is your first problem.

[@graysonhyder]

where did you get it at? im trying to get a new oem carb for mine but cant find it

[@biglgdb2651]

Mine was doing the same thing before. And when I replace it with a new carb the bike runs but was just stalling after a while. Any advice??

[@anunentitledmotivatedmille7731]

It has to be the fuel line cogging up your carb try a fuel system flush then clean the carb with compressed air.

[@V-Angel]

I have the same isue with this stopping noise untill it warm up then it is ok .i would like to know what is this "cough"

[@recklessriding2139]

Vagelis K it should be the vavles

[@nathankraehenbuehl]

Sounds like a cam chain click. You should have the engine rebuilt. If your doing cam chain it isn't much move to just go for full rebuild. That way you know it's all good and will last. If it jumps time you'll be buying a whole new motor.

[@kevinriess]

sheepdog 9/11 well I’ve sold it since this video and after the video it ran great until I sold it, and I never really heard the click anymore so who knows. But I guess it’s not my problem anymore lol! Thanks for informing me tho, I appreciate it!

[@byakaxolo2052]

How for can one extend the front and rear wheels. I want to make mine look bigger. So, I was thinking of getting a longer stem and some spacers

[@kevinriess]

Byaka Xolo If you like they way mine looked I only had spacers on both the front and rear wheels and it made it look pretty good!

[@byakaxolo2052]

@@kevinriess cool👍🏾. Maybe some longer A arms will do. And a wider rear axle

[@connorp8408]

There is a cap that goes on that, there was a rubber stopper that comes with it

[@renatogoncalves6037]

Boa tarde,descobriu o problema?

[@vuquocdo7614]

hey Kevin. i just got a raptor 350 myself, i changed my carburetor myself but i have and issue with the air and gas intake. how many turns did u have for the air and gas?

[@kevinriess]

Vu Quoc Do now what do you mean by turns?

[@nathankraehenbuehl]

Idle mix screw. 2 1/4 out from full in. Run to fine tune.

[@crazydrummer181]

9:12 there’s your problem dude. Did you ever realize the airbox isn’t connected to the carb? That’s your noise right there...

[@TheVlad0000]

Did you have to do anything to the new carb before installing it, like put in jets?

[@kevinriess]

vlad fedoseyev Nope everything came with it just take out the old and install the new. But if you have an aftermarket exhaust that needs different size jets then take those out of the old carb and put them in the new one!

[@TheVlad0000]

@@kevinriess did yours sputter at full throttle? if yes how did you fix it?

[@kevinriess]

vlad fedoseyev when you say sputter what do you mean? Like it bogged down or went out of control or what?

[@24realm]

You skipped the most important part. How to actually take the carb out. Or did miss it?

[@joserodriguez39624]

Which year is your raptor bro? I have one equal but I bought it from a guy without the papers and title and the serial isn't the original it has other

[@kevinriess]

Mine was a 2005

[@patrickbowland7468]

The boot to the air box doesn't even have a hose Clamp or is it sealed to the carb.

[@kevinriess]

Patrick Bowland Yes it does have a clamp.

[@yaseenalloush]

Thanks bro my raptor 350 has tge same problem

[@BigsteppafrmdaO]

Where did you order it from

[@foreign-v2421]

how are u nerf bars mounted because i’m trynna get sum but idk if they will fit let me know asap??!!

[@kevinriess]

Send me a DM on insta and I’ll send you some pics of how mine is set up. My insta is @kevinriess_

[@foreign-v2421]

can u let me know or show me how they are mounted on insta

[@justinhussey2170]

Yes there’s suppose to be a cap on that piece. I’m sure u already found out after 4 years lol. But for anyone else’s issue. Check and make sure that is plugged off

[@NathanandMelissa]

So you had to look up online how to remove the throttle cable, but yet you didn't explain how it was done in the video. Odd

[@VictorTorres-jc1pc]

Kevin - can you share where you purchased the carb and the exact same model please? Need to change out for my Raptor 350. This helps a lot. Thanks

[@kevinriess]

I originally bought it off of Amazon and idk really which model it was but they sell like hundreds of different ones which are all the same but just different brands. I’ll try and find it real quick

[@kevinriess]

Alright well I remember purchasing this one and it worked well just make sure to change the jets out of the carb that’s on your quad now and put them in the new one. Also it is Chinese carb so results may vary I guess you could say! Good luck -Carburetor For Yamaha Raptor 350 Carburetor Yfm350 YFM 350 2004 2005 2006 2007-2013 Carb New www.amazon.com/dp/B07J1YY1MR/ref=cm_sw_r_cp_api_fabt1_lhRUFbVZJH72R

[@EB-dr8qv]

Looks like your air filter came off and the noise mite be a valve adjustment

[@soccer7283]

The clicking is the stater

[@brandon25184]

Did you ever fix that clicking sound? Or figure out what it was?. I just bought a 350 raptor and it dose that exact same thing, I even brang it to a Yamaha shop and they said they fixed it but never did Was a bad shop. Would very much appreciate some help

[@kevinriess]

If I remember exactly I think it was either the air/fuel mixture being incorrect or the carb not getting enough fuel. What fixed it for me was just getting a new carburetor!

[@brandon25184]

@@kevinriess okay I’ll try that, thanks

[@jjtt6866]

@ 9:12 you have rubber boot all the way off from carb :)

[@magnumllama400]

My friend

[@magnumllama400]

Bro are you a mechanic? Do you still keep the hisun?

[@paflyfishing7703]

hey where do i buy graphics cause i can’t find any anywhere

[@kevinriess]

PA Fly Fishing the ones I installed in the video were from sengegraphics.com

[@bernardodupuy1966]

Hey brother, how do you get the throttle cable?? Im having problems with that

[@kevinriess]

Bernardo Dupuy do you have Instagram? If you do I can show you how, mine is kevinriess_

[@bernardodupuy1966]

Finally i could after a little bit of struggle 😂, thank u friend. Best wishes from Argentina

[@kevinriess]

Bernardo Dupuy Alrighty well good luck with the rest of it! If you have anymore questions just ask me I will gladly help you! Have a good one👊🏻

[@flamekills9554]

Do you know what size the stock carburetor is?

[@kevinriess]

I believe it’s a 36mm

[@integraKiller95]

Where did get the Carburetor?

[@kevinriess]

integraKiller95 off of amazon, just look up Raptor 350 Carburetor

[@frehqy1679]

Where did you get your carb from

[@kevinriess]

I originally bought this one off Amazon!

[@lucasalling420]

Nice video. how much does one of those exact atvs cost you?

[@kevinriess]

Lucas Alling Thank you and I had payed about $1800 for mine when I first got it back in December but larger sizes like mine will be in the price range of around $1500 to like $4,000 if you looking for used ones or even sometimes brand new and smaller ones could be sometimes $500 to like $1700 or around there!

[@lucasalling420]

@@kevinriess ok thanks but explain smaller more affordable ones then cause that would be helpful. Thanks!

[@kevinriess]

Lucas Alling well most cheap quads are not really the best to buy because they will break very quickly and they are not made very well and will not preform as well as brand name ones. Also try downloading letgo and looking for ones people are selling in your area or craigslist! But you could still buy one of the cheaper $500 ones offline and its would still be good to ride just may cause some problems down the road.

[@lucasalling420]

@@kevinriess alright thanks

[@courtneyanne3562]

Mine was 2k but mint condition only rode like twice at least.

[@angelguardado309]

Did you get a OEM carb or amazon carb?

[@kevinriess]

Was an Amazon carb

[@angelguardado309]

How does it ride with the amazon carb? Heard those dont go well with 350?

[@jimimaier8279]

Cap needs to be on it I just redid my carb and I took the cap off and it made the same noise go outside and cover the gold hole it will instantly stop! Get a cap on that ASAP

[@kevinriess]

Yeah I actually figured this out yesterday when it was running like crap and my grandpa said it may be sucking in way to much air because I took that cap off it and then right when I put it back on it worked great! But thank you ;)

[@jimimaier8279]

Yep same thing happened to me

[@orivera215]

@@kevinriess So how did you take off the throttle cable from the carb.. I'm having trouble with mine

[@jasonsmith5919]

Ressurge what cap?? Does this remove the ticking sound when running??

[@06-2k]

I just watched this video and capped off mine, and legit 3 minutes of riding down a road my quad blew up and took a shit on me now I have no compression and loud knocking noise when I was coming to a stop

[@user-ei1zx2nj3f]

How much did it cost

[@kevinriess]

If I remember correctly it costed around $40-$50

[@bikelifedrew]

Bro this is the quad I bought a couple days ago it’s not starting up I was rippin it and now it’s not running

[@kevinriess]

Just have to go through all the procedures. -Does it have gas? -Is gas getting to the Carb? -Is it turning over? -Is it starting than stalling?

[@michaelesposito8492]

Sounds like a miss fire

[@al.g.123]

Anybody ever find the problem with the click sounds. Have the same problem.

[@Ianford07]

you find out?

[@al.g.123]

@@Ianford07 gotta go in the engine and adjust valves and timing. If that doesn’t work maybe it’s a dirty carb. Idk I did some research and the majority of the people said it was adjusting valves and timing. Haven’t tried doing that but since everybody said that solved the problem, that must be the solution.

[@carlosvargas5430]

Sparkplug

[@TacoDave19]

So many bad factors to this video lol. No how to or help with pointing things out. You honestly could have left the original carb on because you were getting too much air, that sucking noise, from both of them.

[@Tyleriscooltoda]

Did u unfriend me in fortnite its Xx silent beast now i play on ps4my name is THG-_-Killer

[@jerryz754]

You don't even show the hole process.

[@kevinriess]

Yeah sorry when I recorded it most of the clips were really bad and it was hard to film with no one helping me