Yamaha Tenere 700 replacing the original sparkplus for NGK Iriudium. Detailed shots to see how to get to the Spark plugs indide the T7 Tips & trics how to do it and the tools to be used for the job.
Пікірлер: 54
@martinfretwellКүн бұрын
Thanks this was helpful.
@martinfretwellКүн бұрын
Lift the dust seal on the coils and put a little wd40 on them twist it in a little this helps.
@17405pop Жыл бұрын
Following my previous comment and for anyone contemplating doing this: I have a small but quite well equipped workshop and with a lap top on my work bench, got set into the task of my plug swap. I followed this tutorial step by step and you can be assured that every necessary step is covered. I just have to say that I found the HT coils a lot harder to remove than Oumbouk Travel man did and had to make a little lasso from 6mm nylon rope so's I could wiggle the coil with my right hand while pulling upwards on the rope from the top. Also, I found getting the cable holder removed then, later, back in place was a real fiddle. All that being said though, this is a 1st class set of instructions and I recommend Oumbouk Travel Adventures method compared to some others that I considered on KZbin.
@OumboukTravelAdventures Жыл бұрын
Many thanks on your kind words and out video helped you
@cider9993 жыл бұрын
This looks so complex. Can't even imagine doing this in a field 🙈 Thanks for a great tutorial!
@17405pop Жыл бұрын
Easy to follow covering every aspect of the procedure. Thanks! Saved me a lot of trial (and error)
@johnmfjw3 жыл бұрын
Nice job, well done.
@DirtbagonWheels2 жыл бұрын
thanks for the clip, so now I have an plan to do that 💪
@Nick-me9tl3 жыл бұрын
Thanks for this great video!
@helios1225 Жыл бұрын
Vielen Dank für das Zeigen. Da werde ich etwas Zeit einplanen müssen.
@giacomobonacorsi31163 ай бұрын
Really good!
@Francescoalamia41857 ай бұрын
Sei stata Molllto utile, grazie
@nikitasabatino70202 ай бұрын
Uff thats not a thing of 10 Minutes :D Thanks for the Video
@daveinwla63603 жыл бұрын
This is a LOT of hassle to just replace 2 spark plugs. I had thought that it would be simple on a parallel twin. I can hardly wait until Royal Enfield makes an ADV bike using its 650cc air/oil cooled engine. The spark plugs on that bike will be much easier to replace.
@OumboukTravelAdventures3 жыл бұрын
With the new spark plugs only every 60.000 km and 1 hour so not big problem.
@michaelk.3661 Жыл бұрын
Nice Video, thanks! Could you pls list all tools which are required for the Spark Plug change (length of Extension, magnetic sp-tool... ) and maybe a source/Link to be ordered. I've planned to change so myself. Thanks a lot, Michael
@OumboukTravelAdventures Жыл бұрын
I only ordered the magnetic spark plug part. Others parts from my own toolbox. You can send me email and will reply with needed tools vandampeet(@)gmail.com
@Hoektandje00013 жыл бұрын
Leuke video's zeg
@TammyDenseDdank565810 күн бұрын
Taking whole bike apart to change two spark plugs.
@Peg.T7Ай бұрын
Hi! super congrats for video, May you said me if you have used NGK Iridium LMAR8BI-9 ?? May you said me the specific NGK model detail? thaaaankssssss
@OumboukTravelAdventuresАй бұрын
I do not know. Just iridium for T7
@panagoskakatosis53142 жыл бұрын
for xtz 750 is 18 nm power
@miami_adventures_motot71322 жыл бұрын
A other video that skips and edits the hard part of the removal of the coils. Check out my upcoming video of how to easily remove them and the spark plugs with just a standard 14mm socket.
@alrightdave6135 Жыл бұрын
Where is it then?
@paninocioccolato3 жыл бұрын
Where did you find that small top case? :D it looks cool!
@OumboukTravelAdventures3 жыл бұрын
That small topcase is 20 years old from Oxio
@pauli657010 ай бұрын
I am impressed…but sh!t what a process 😳
@goatman86 Жыл бұрын
This is nothing. Some years back my buddy called me to help him change plugs on his Kawasaki Z800e. Turned out the whole engine had to be lowered from the frame to access the plugs! In the end he took it to the dealership to do it. Some engineering geniuses there at Kawasaki
@daveinwla63603 жыл бұрын
Are the iridium plugs specified by Yamaha, or are they to solve an ignition or wear problem?
@OumboukTravelAdventures3 жыл бұрын
They last longer
@ehtvevo11074 ай бұрын
Can u send the link for the spark plugs? There is alot of choices i get confused
@OumboukTravelAdventures4 ай бұрын
Just take iridium doe T7 and is ok
@henkjansen28443 жыл бұрын
Leuk gedaan!, neem aan dat je de tank niet leeg hoeft te hebben voor het verwijderen?
@OumboukTravelAdventures3 жыл бұрын
Nee klopt. Bij de koppeling heb je even een drupje benzine maar verder niet. Deze tank was nog half vol.
@maxman7384 Жыл бұрын
Sorry, what misure (mm) for magnetic sparke tool?
@OumboukTravelAdventures Жыл бұрын
14mm
@Hoektandje00013 жыл бұрын
Zijn jullie t7s verlaagd? Ben zelf 1,75 maar ik pas niet op de originele t7.
@OumboukTravelAdventures3 жыл бұрын
Janny is 165 en volgende week komt daar een video van
@Hoektandje00013 жыл бұрын
@@OumboukTravelAdventures super leuk! Ik ben benieuwd naar de video😁 thanks👍
@Valterpenato2 жыл бұрын
where to find spark plug key? tks
@OumboukTravelAdventures2 жыл бұрын
Google magnetic spark plug tool
@SilkRoad20203 жыл бұрын
Hello, heb je soms referentie van deze irridium spark plugs. zal deze laten plaatsen bij volgende service laten plaatsen ;-) (anders heb ik weer bouten te veel na montage :-) :-) )
@OumboukTravelAdventures3 жыл бұрын
Even Google dan vind je ze . De dealer zal het ook wel weten.
@SilkRoad20203 жыл бұрын
@@OumboukTravelAdventures thks a lot
@onlynature9507 Жыл бұрын
this much labor and fine workmanship, yamaha should have thought of another way to do this, a hinge to the tank, a lock or the bolts holding the hinge mechanism, remove them just like the head part of the trucks 😃 but still I will do it myself nice video thanks
@donnym21039 ай бұрын
How long would you say it takes from start until finish?
@OumboukTravelAdventures9 ай бұрын
When you have done it once the second time can be in one hour
@OumboukTravelAdventures9 ай бұрын
When you have done it once the second time can be in one hour
@donnym21039 ай бұрын
Thanks 🙏
@donnym21039 ай бұрын
Looks very easy compared to y old KTM 1190 adventure 😂
@FB-yp5dk Жыл бұрын
All nice and stuff, but what about rebuilding the bike? Would have been nice to show that as well.
@alainremi2672 жыл бұрын
Excellent KZbin that convinced me NOT to buy a Tenere !!!