Yamaha warrior 350 366 custom yfm 350 final

[@BobPapadopoulos]

The Warrior is truly the most underrated quad out there. Mine was my first quad and it still rides like a dream.

[@rzl07375]

Hell of a job. The old school air cooled four strokes hold a place with me. When I was growing up, the Warrior was THE 4 stroke performance quad.

[@917Jolly]

Its all in the head and carb. A good air filter and exhaust too. Get the head ported real good, better springs, and a good web cam. And if you dont mind race gas go to 12:1 compression. Or put in a 10.5:1 piston.

[@michaelgatestheunfinished3777]

Can't wait to see this bad boy resurrected

[@917Jolly]

Michael Gates you and me both brother! I have a one off idea for the wheels as well.

[@2fast4yu55]

917Jolly i would like a swingarm plz message me

[@boltfn2639]

Wow, I am extremely impressed with your work! Great job on this I can tell you’ve put a ton of time into this. I’d pay money for this.

[@917Jolly]

Thank you! I'll make another video of it now. It looks a bit different with some added parts

[@boltfn2639]

@@917Jolly Sounds good!

[@917Jolly]

coolers from autozone, lines- summit racing, oil filter cover with fitting is off a 95 bigbear

[@leMarine20]

i have told you this on one of your pics on YFM but your bike has been the inspiration on my bike. I love your bike bro!!!

[@917Jolly]

@redneckchannel1 Thanks man, the wall thickness is 1/8" on both the swing arms and a arms. I rode the 87 pretty hard for about 2 months and the swinger and a arms held up just fine.

[@917Jolly]

There not beadlocks, they just have that reinforcing ring to make them stronger. There ITP Baja wheels. I got mine from Dennis Kirk

[@917Jolly]

The oil filter adapter is off a 95 bigbear. Then i got stainless braided lines and the cooler seprate

[@redneckchannel1]

@917Jolly k thanks for tellen me if i get arround to makin one il put a vid up of it

[@917Jolly]

I cant remember how much the adapter was, but i got it from a dealership brand new, The cooler was 30 and a 10ft section of braided hose was 30.

[@TheXxskillsxx]

i give u mad props for this bike i cant even imagine the searching and time you put in to this....to be honest i have a yfz 450 and an 87 warrior with some rebuilt featues and i have to say i thing this thing is actually a cooler looking bike than my yfz..not faster though lol but very nice bike

[@917Jolly]

The box is for a warrior 350. They dont make them anymore. yes it uses a 250r filter, the opening is massive but then necks back down to the warrior airbox to carb rubber tube. Very good airflow, but the seat clearance sucked, i have to heat my seat pan up and make it clear for more room and let the box breathe better.

[@averybentz]

howd you cut the front fenders so nicely?

[@mswizle]

Sick quad

[@917Jolly]

Thanks

[@rzl07375]

Awesome man, keep the old classics alive.

[@917Jolly]

yes the black ones are. I just used some flat black paint i had on the shelf nothing special. Its all in the prep to make it stick

[@917Jolly]

front rims are 10" rears are 9x9. Front tires are 21x7x10 rears are 20x11x9

[@917Jolly]

@raptorandblaster Yeah the green did look good, but it was only spray paint so it chipped really bad. Blacks more me.

[@917Jolly]

Really depends on the guy doing it, I got a good hook up so it was a really good price

[@kbaker3959]

nice mustang in the backround. i could tell from the hubcaps

[@917Jolly]

tape to make the cut line and big tin snips and file and sand paper to smooth edges

[@edgardmunguia]

Amazing atv, I just purchased a 2000 warrior and I'm planning on tuning it up to improve it. Any tips on where to start looking?

[@917Jolly]

Ebay man! Get on yfm350.com. Tons of cool guys to help you out and lots of good parts for sale too

[@johnb.3022]

Edgard Munguia exuast.

[@917Jolly]

You mean like the sprockets? I run 14 tooth front and a 40 tooth rear. If yours is more of a stock motor leave it the factory ratio

[@JonezProductions4]

Did you Spray paint the plastics? Or get them powder coated with the frame? And where did you get the 366 kit? Im rebuilding my warrior and want to make it all black too and get the 366 kit. Thanks

[@lucasfennema6778]

U can’t powder coat plastic only metal

[@DFlow94]

NICE QUAD I HAVE A 1987 YAMAHA WARRIOR 350 CAN U PLEASE EXPLAIN TO ME HOW I SHOULD STRIP IT DOWN TO JUST THE FRAME I'VE BEEN WANTING TO PAINT IT BUT I DNT REALLY KNOW HOW TO START STRIPPING IT DOWN

[@marcusTSi]

I did not know they didn't make extended a arms for the 87. I powdercoated my oems but would like to upgrade someday. Guess I'll have to fab up my own. Do you have any drawings or basic measurements you used to fab up yours?

[@917Jolly]

@P8WERSTR8KE25 No im keeping both set of shocks for when i build up the red 87 warrior that swinger is on

[@quadrider8431]

My 87 is all stock except the engine

[@917Jolly]

@warriordriver350 A arms are not for sale...

[@anthonyvillanueva5982]

We're did you get your chrome stator cover and front sprocket guard?

[@917Jolly]

Thanks a bunch man, alot of time, sweat, and blood are in this thing. Its def not the fastest quad, haha, but its fun enough for me and i love the comments i get about it.

[@redneckchannel1]

What thickness is the wall of that tubing I'm thinking of making one of my own. Yours looks pretty badass

[@donnybra1230]

@917Jolly would you say full flight is as good quality as amircan star

[@917Jolly]

Tops out at about 60. Gets there in a hurry thou. I have it geared for more tight trails than fast field riding.

[@jerzee-bullie-da-collector5092]

What plastics did you use or did your cut your original plastics?

[@917Jolly]

@@jerzee-bullie-da-collector5092 they are stock warrior plastic just cut.

[@917Jolly]

@donnybra1230 There arms yes, but ive heard the Hiem joints dont last very long.

[@jostenhernandez5088]

What tipe of shock you use in all the Yamaha warrior because I have one but my shocks are bad I’m trying to replace what you recommend me

[@jameynoland3219]

sweet warrior seen you vids before wanted a warrior ever since now i have one its a 98 starting to do a build an how much for your swing arms ?

[@hondaman405]

Do you have any suggestions on chain ratios? I need a new one and I'm not sure of what to get. I ride in the woods only but don't want to take away much speed

[@JDLongboarderz]

hey is tha a rappy 350 um air box. does it clear the banshee rear shock and still have seat clearance? is that a K&N 250r filter or something else? good air flow? thanks man really appreciate your response =]

[@917Jolly]

Motor a 366 JE 10.5:1, Major P&P, oversized valves, Hotcam, Full Yosh exhaust, Mikuni 38mm carb, UM aluminum airbox w/ 250r filter

[@deerbuster99]

is that a foxbody mustang in the back ground

[@aidanallison1293]

where did you get the tether?

[@917Jolly]

Front is +2 total width over stock, there +2 ASR arms with hiem joints. Fornt fenders i cut myself

[@917Jolly]

You can somethimes find them on ebay, but they have disconinued them so you'll prob have to find em used.

[@Shawn_Magara]

Beautiful Warrior mate!!

[@averybentz]

wait, you spray painted the plastics? i thought you powder coated them

[@ak47man2002]

how much iv been looking for a nice one like that, great job

[@dylanroy6956]

How did you make it liquid cooled i Have a 2002 Warrior that gets pretty hot.

[@michaelclay271]

how did u run your oil cooler

[@kylerichardson3548]

another question, what is the front and rear rim and tire size?

[@Kole208]

any ideas for things to do to make my worrior faster? myn is stock now.

[@mthomison1]

i blacked mine out to couple weeks ago mines a satin finish what motor mods u have done to it

[@iTzZTCxD]

The back rims? Are they itp rims? And if so the offset is 3x6? If so where did you buy them?

[@TheBerpinator]

Hey sweet Warrior, I was wondering where did you get the front bumper?

[@917Jolly]

@warriordriver350 No sorry if I confused ya, Im not comfortable making the a arms, There to much liability in doing them... Sorry... But i must say, Full Flight, ASR, and Wicked make some very nice a arms for the warrior and are reasonably price.

[@chandlerwilliams503]

Hey man, where did you get that radiator? Please PM me the link or something because I want one for mine. Thanks bro. Also, kick ass quad.

[@jayfinesse8228]

That's prm summit bumper u have I can't find it no where on eBay or Amazon or no where do u know what's the website u buy it off of?

[@917Jolly]

@donnybra1230 There not for sale. They'll be going on my 87 once i get it together

[@sled_neckx9972]

Is it a different engine or just a stock engine bored out to a 366

[@travgilberti4551]

Guessing different engine warriors are air cooled not liquid but again just a guess.

[@rpmignorance9104]

I can't find one

[@jayfinesse8228]

Is that a radiator cooler on the front nose

[@cottongrillz11]

How much for the swing arm? And how is it better than stock?

[@someonewhodoesntcare2259]

How much this set up cost?I wanna make mine look the same

[@kylerichardson3548]

please tell me where you got your beadlock rims. i cant find them anywhere

[@Guillamonsta]

You need to get a gopro helmet camera so we could see you rip the trails!

[@dEiSeL5260xz]

how do you like the baja rims, thinking about getting some?

[@redneckchannel1]

i think i saw ur warrior in dirt wheeles mag nice bike

[@PJTFZD]

Jolly, I have an R6 powered 88' Warrior I built. I may be interested in one of your swingers or just some advice on what I should run. I trail ride my bike so i dont want a really long one +2 but i want a round carrier, because of the extra power I have. Check out my vids to see mine in action. Great build, looks fantastic!

[@farmvillerapesbabies]

Great looking warrior.

[@gunfreak0717]

Where did u get the custom hood foe this bike At

[@JonezProductions4]

And also what kind of axle is on there?

[@loganburnham2175]

do you no if fox floats will fit on an 89 warrior?

[@pututypichon1323]

Nice work man.... by any chance do you know where can I find those rear flaps for a 97 warrior... thanks ill appreciate 🙂

[@917Jolly]

Thank you. Ate you talking about the rear fenders? They are stock warrior fenders just painted flat black

[@brianlatour7891]

Does any company sell + 2 extended swing arms for 1997 Yamaha Warrior. All I see are swing arms for Banchee!

[@917Jolly]

Not that I know of anymore. I do make them in a few configurations

[@917Jolly]

Off ebay, the brand is miejer or something like that

[@brainlance]

what size tires are you running on the back

[@YamahaYZrider75]

what was that color called the green? i like it

[@tylermeade1143]

What other aftermarket parts from different quads would work on the warrior? I know most banshee stuff would work if I'm not wrong

[@zacksimpson4717]

I heard the yfz450 front shocks and the 01 raptor rear shock will fit

[@michaelgatestheunfinished3777]

In regards to Parts Banshee Front rear master cylinders Lights Rear suspension dog bone and link Rear mounter sprocket guard and chain guide Rear shock with the air box modded There are other components of other machines that can be worked Here’s a link to my warrior for ideas Laters kzbin.info/www/bejne/mYSql5d6irGZoKc

[@brainlance]

what do you git for your swing arms im giting a 93 warrior thats bone stock other than the pipe but if you will email me a price on the swing arm thanks.

[@Kole208]

any idea how much it will cost me to do that?

[@wyattphillips6521]

Howd u get the oil cooler on it and nice bike

[@joemartin6776]

That is an AWESOME WARRIOR!!!

[@917Jolly]

Joe Martin Thank you!

[@ollomandalipi2491]

hey what kind of plastics do you have? please reply!

[@kylerichardson3548]

could you tell me the front rim size? is it a 10x5 or a 10x8?

[@FatherQuad]

Looks fantastic.

[@917Jolly]

Sorry havent built anymore. I made 3 and thats it

[@warriordriver350]

@917Jolly i thought u said u make a arms you were saying about that at the end

[@jtownskateboards21]

do you still have this warrior

[@917Jolly]

Sure is, 1990 coupe 5 spd. Check out my other vids of it

[@francismorel]

how much hp it got with the 366 kit?

[@jayfinesse8228]

Is that a coolant on the front what the name of that?

[@BeastlyWarrior228]

you can use mine next time we ride i just got a suction mount for it

[@warriordriver350]

Hey how much for your a arms???? I can afford them ripped off prices for $600 for just one side!!!!

[@metalli445]

Curious what kind of rear tires are you running? Are they a good mud\offroad tire?

[@917Jolly]

All tires are Maxxis Razr2's they are one of the best for all terrain. Kinda suck in the snow but all of these types of tires do

[@metalli445]

Thanks for your feedback!

[@jtownskateboards21]

Whats the top speed on her and good job on building her up shes super sick you should check out my honda 440ex on my channel

[@trevorlogan15]

what tires are on the back

[@nicholasquesenberry8144]

917 jolly _ Do you still make raptor 350 components a-arms particularly +3's maybe? If so can I get in touch with you!

[@917Jolly]

I still make the swingarms if you can Get the correct carrier but not the a arms

[@nicholasquesenberry8144]

@@917Jolly so you only make swingarms for the 350's now

[@917Jolly]

Correct

[@408portuge]

where can you get those custom stickers?

[@jamestroutman7517]

Chances in part links? I’m having a hard time finding aftermarket parts and such for these?

[@917Jolly]

Alot of parts are discontinued and hard to find. Try ebay and the Facebook warrior 350 groups.