Yamasa Pink Panther Slot Machine Repair - The reel stop buttons don't work FIXED!

[@bigshow5173]

Get a new soldering iron tip. Get a few sizes too. Then get some tip tinner to prep the new tips. You will find your solding will improve with the correct equipment

[@bobbymiller8563]

Joel , i just pick up a used Japanese slot machine. I fixed a few issues on this slot machine. The last issue is the wheels didn’t not stop by hitting the buttons. I checked exactly what you did. My fuse was blown and the capacitor C10 was bad too. I ordered the 1uf 50v capacitors and fuses from Amazon. Thank you for the help. You saved me a lot of money.

[@mav6983]

I had the same issue on my Diver type a machine. The inside looked identical to your machine, so I checked the capacitor and it was blown. You save me a ton of headache, thanks a lot man!

[@pullinforthechildren2103]

Just picked up dang near the same machine with the same exact problem. Hope you saved me a tone of time troubleshooting thanks

[@bobbymiller8563]

Great job. I have a Japanese slot machine with the same issue. I will have to check that capacitor on that board now. Thanks for the help.

[@1224yari]

I got pretty much similar machine and same problem. I just wanna say good work and thank you a lot save me a lot of time.

[@Lovenpain]

I have the Taco Slot(octopus) just got it from a friend for $100. Got it all to work but the stop buttons. They light up but do nothing. I saw the fuse blown on the stop board. Im hoping with your fix i might can get mine to work.

[@frankcabrera6319]

What was the issue with ur machine

[@Lovenpain]

@@frankcabrera6319 I replaced that resistor and it worked!!

[@Radioman56-3]

Super bunny slot machine do you think I could have the same.. my capacitor could be bad my push buttons don't work

[@Radioman56-3]

I replace C10 capacitor in my super bunny slot machine. Stop buttons all worked for a little while now to work but one does it what could be the problem?.

[@jonathanstieg4309]

Thanks a ton,I'm having the same issue.you Rock bro

[@ackerapple608]

Yooooooooooo, I love you. I’m not in love with you but I do love your soul. My machine had the same exact problem and I got my tester out and compared and sure enough I just had to replace that same cap. You’re a beautiful soul for taking the time to film the steps. I’m dealing with the speaker buzzing now if you have any tips (it’s grounded)

[@Radioman56-3]

I just got the capacitors in today. Will reap be replacing the one that reads zero zero

[@JoelRyanQuinn]

It will have two prongs that connect to the circuit board. If they're not labeled, the longer prong is the positive and the shorter prong is the negative.

[@Radioman56-3]

@@JoelRyanQuinn replaced C10 capacitor... Stop buttons work great thank you..

[@jeffbolton7754]

What did you do to fix sound. I have same machine but different title.

[@socom1921]

Where did you find the capacitor and fuses?

[@JoelRyanQuinn]

Amazon. Search for "1uf 50v radial dipped capacitor"

[@Radioman56-3]

​@@JoelRyanQuinnthank you sir God bless you I will get some right away

[@Nothing19800]

GREAT DEAL!!! I just bought one blind from an online goodwill. All they did was plug it in, they noted nothing else it has both keys. Any ideas on a value of a juggler girl kitac???

[@colinmann3480]

That so good to see it working again, now you just have to get it to use real money, so you can paly & save up money at the same time.

[@frankcabrera6319]

I have a delsol slot machine ,buttons light up but when pressed it does not stop the reels from spinning. Any help will be appreciated and I have replaced the stop board but no luck

[@milktruk]

Good catch

[@paulsworkshop4179]

Did you ever get your sound to work?

[@RobertMariano-i7i]

I'm also having a reel spinning issue. Stop buttons doing nothing. You order some capacitors but I don't know what the numbers mean on the capacitors or what/where to order.. Please advise..

[@JoelRyanQuinn]

Search on Amazon for "1uf 50v radial dipped capacitor"

[@thetropicalcafellc1257]

Joel…can you make a video to change the pics on the reel? I’m looking to custom mine. Thanks 🙏🏽

[@JoelRyanQuinn]

Here's a user made manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk I would look for guides/videos on replacing the reel entirely or replacing surrounding parts since this will likely involve removing them entirely. If you plan on painting them, make sure you use a light touch. If one customized icon weighs significantly more than the others, it could set off the anti tilt features because the machine will detect an imbalance and think you're cheating by "weighing it" towards the jackpot. Lastly, you should make my face the jackpot! Good luck

[@deannewilson4472]

I have same problem what capacitor do I need to order

[@coffeybrad7]

Could you tell me where you got the capacitor from because I had the same problem and I just checked but I can’t even see the damn thing, really bad eyes regardless of how I try to look at it. If you could let me know what capacitor it is I would really appreciate it and way to get it

[@juliamartin1962]

I have a yamasa king pulsar machine. It lights up but nothing else. Any ideas?

[@JoelRyanQuinn]

Start replacing fuses if they're blown. Here's a user made manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk Good luck!

[@juliamartin1962]

@@JoelRyanQuinn thank you so much

[@iamahappydadiamahappydad9708]

How do I get my key to turn its stuck in the off

[@RonBardo-y4w]

I need to see a CHERRY MASTER 96 POKER MACHINE FIX BUTTONS WONT WORK

[@tyrussell5169]

What size is that c 10 capacitor??

[@JoelRyanQuinn]

Capacitor is a 1uf 50v radial dipped capacitor

[@joeysmith4515]

Are you available to help me on my machine?

[@alexwowdotcom]

You are using the wrong kind of solder. Any Autozone sells the ones thing kind you need.good video.

[@Radioman56-3]

I have some I'll send you it simple it's rosencore solder

[@iamahappydadiamahappydad9708]

I can’t get my key to turn

[@jackiesmith-vb5gw]

get yourself a decent soldering iron and good solder will you!

[@nabiltadros6521]

Can u call me please I need to know where is the sound I need to lower it

[@JoelRyanQuinn]

Here is the manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk/view?usp=drivesdk