So I get asked a lot why would you need Multiple Charge Controllers or how do you wire this. So in this video I go over that. Bit of a long video. Hope this helps.
Пікірлер: 235
@ruralsolutions8253 жыл бұрын
OMG!!! Thanks for the presentation sir. You just clarified me on the biggest confusion I had on this topic. Thumbs up
@yankey43 жыл бұрын
More than welcome my friend.
@sreekumarUSA Жыл бұрын
110722/1124h PST 🇺🇸 This is the 3rd time, I’m watching your instructional video. The narration is simple and very understandable for lay man. You gave me the idea of using 2 CCs in multiple PV array configuration. Thank you and best wishes.
@yankey4 Жыл бұрын
Thank you!! This is why I post videos.
@acoupleofoldfartsjusthavin13392 жыл бұрын
Oh my gosh - Thank you so much for this video. I just spent an hour with a guy ranting at me that this couldn’t be done. So, so glad to have found your video! I currently have four 200 watt panels that I am planning on putting on my RV. But then I also got a diy mini-split ac unit to replace the roof air. The 800 watts will run it - but probably not 24 hrs a day, 7 days a week. So I am now looking at adding an additional four 200 watt panels for a total of 1600 watts. I have been stressing over the charge controller, the larger ones are so expensive. This just solved that problem! You just brightened my day! Thank You!
@yankey42 жыл бұрын
So happy to have helped. This is why I make videos. If you need more help let me know. God Bless.
@Seth-uo9pe Жыл бұрын
Hello, I'm building a camper van and I would really appreciate it if you could let me know if this worked for you! I'm trying to do something very similar but I'm worried it won't work.
@Rachominator4 жыл бұрын
I think you explained this before, but it's good that it is now a separate video (more searchable). Having a separate video about this, and the contents of the video itself: very helpful! Thanks, Bobby!
@yankey44 жыл бұрын
I have yes. Thanks for being around that long. I posted that video in this one. God Bless.
@joegresells21612 жыл бұрын
Finally! I've been watching videos and all I wanted was simple explanation and a simple diagram that I could understand and this video delivered and answered my questions. Thanks for a great video!
@yankey42 жыл бұрын
Happy I could help. If you need more let me know. God Bless
@bradfordpalmer22983 жыл бұрын
I really needed to hear this. It was a blessing to me. I was about to get a whole extra battery bank!
@yankey43 жыл бұрын
Glad I could help.
@stevesmith85882 жыл бұрын
I really appreciate the clarity of your explanation. Straightforward and easy to understand. Thank you.
@yankey42 жыл бұрын
Thanks glad it helps. God Bless.
@WereReallyRelayCamping4 жыл бұрын
I simply connected my chargers this way 2 years ago, all fine, just saying the advice in this video is right.
@yankey44 жыл бұрын
Thank you. Going to stop over and sub. Hope you make videos. God Bless
@rongray41187 ай бұрын
My wife and I are in Northern Nevada and preparing to go fully off grid. We would like to charge (2) Absolyte GX (2,000 Amp hour battery banks/48 volt). We are looking at (2) Schneider Electric 865-1034 Conext MPPT 100 600: 6kW Solar PV Charge Controller for charging w/ (20 XW PRO 6848. We will be using 30+ LONGi 545 watt solar panel in two arrays. Thank you for posting your video.
@yankey47 ай бұрын
Your welcome and that sounds like a outstanding setup
@chrismabbitt74052 жыл бұрын
im working on an rv application with renogy products and this is one of the few channels that doesnt assume your using victron (i cant afford) and your the only one to tell me to use a bus bar not some victron tied in hardware that talks to the rest of the victron products (again dont have, cant afford) i appreciate the consideration 😀
@yankey42 жыл бұрын
Your welcome and I am glad I could help. This is why I make the videos !! If you find you need more help. Feel free to email me. Yank_1978(AT)Yahoo.com. God Bless
@jimmoko7833 жыл бұрын
Thanks for the advice, waching all the way from Fiji island
@Willbkool3 жыл бұрын
Good video. You can use different brands of charge controllers as long as, as you say, that they are programmable. I've even used a Schneider/Xantrex PWM C40 CC with a Morningstar MPPT, but I had bulk, absorb, and float settings the same. As for different voltages/amperage panels, in Series the amps should be about the same because voltage adds. While in parallel, the voltages should be about the same as the amperage is added together. Like you say in parallel a lower voltage panel will pull down a higher voltage panel, least common denominator basically. In series, a lower amp panel will pull down a higher amperage panel. It's a bit complicated for most, so it's best to keep like panels together on the same CC.
@yankey43 жыл бұрын
Thank you. Yes your right there. But to keep it simple and safe. Best not to do it. For the cost of PV now you can just add one more CC and get so much more. Back in the day it was worth it. Now it's not. So I did not cover that in this video. Well to keep it simple and to keep the video time down. BTW hope this did not come over as me sounding like a jerk. Your 100% right. We did that for years. Hell my old mans place is still wired like that. Haha. God Bless
@Willbkool3 жыл бұрын
@@yankey4 I agree, it can be done, but probably shouldn't. I've heard that panels are going up a bit now that the silicon plant caught on fire. Who knows?
@jamesellis71383 жыл бұрын
Thank you for the wonderful walkthrough.
@hillbillyfarms3714 Жыл бұрын
Excellent. Thank you so much for the down to earth explanation!
@yankey4 Жыл бұрын
Your more than welcome. Glad I could help.
@melomanacejr2 жыл бұрын
you did a great job and on top of that look like John Belushi, who I love!
@yankey42 жыл бұрын
Thank you!
@saanko87423 жыл бұрын
Simple and effective explanation!
@yankey43 жыл бұрын
Thanks
@moto-rambler Жыл бұрын
You. Are. The. Man. Thx so much for this upload.
@yankey4 Жыл бұрын
Your welcome ! Glad it helped.. God Bless
@billgrey4 жыл бұрын
Great Video, Bobby! I'm a new subscriber and just added 2 400w panels and another charge controller,.... so this was great. Love the idea of the buss bars, too!
@yankey44 жыл бұрын
Thanks and welcome.
@deanveevers39373 жыл бұрын
Hi Bobby, I wish I had you here in UK, We are building a Motor home from scratch and I want to go big with solar. Ive had sooo much advice in Uk and everyone contradicts each other, Ive found the panels that will fit on the roof... 4x 365W Canadian Solar Mono Half Cell Panels - Super High Power Mono PERC HiKU and have no idea now how to complete it... Thanks for your Video, really helpfull....God Bless.
@yankey43 жыл бұрын
Your more than welcome. Would love to help out if I can. Maybe Email me. We could have a FB video call. Yank_1978@yahoo.com
@deanveevers39373 жыл бұрын
@@yankey4 That's Brilliant, Thanks Bobby. I'm not quite ready yet but will definitely email you when I'm a bit closer to it and get together on wassap or something. Cheers. Dean
@northerncaptain855Ай бұрын
Thanks, that was a helpful video.
@herbertvonsauerkrautunterh2513 Жыл бұрын
I use charge controllers and grid tie inverters with dual mppt trackers to have multiple arrays facing in different directions
@wilmorris422511 ай бұрын
This is exactly what I was looking for. Thanks!
@yankey411 ай бұрын
Glad I could help!
@hafunland894Ай бұрын
Thank you, awesome so much great info, in one video!!!
@MindControlledSheepie Жыл бұрын
Thumbnail sold me
@50Acres4 жыл бұрын
Morningstar has an interesting point paper on why their CC's don't need to talk to each other. Not sure if I can dig it up any longer. Cool subject I love having multiple CC's. For me it's all about virtual tracking and easing the load on my battery bank. I only do power hungry stuff during the day and if I always have an array facing the sun I basically always run straight off the panels and don't cycle the batteries. I don't think I've ever had my batteries depleted lower than 94 or 95% full.
@yankey44 жыл бұрын
NICE brother. Yes sir. That is one more thing I did not bring up. 100% of my loads on a sunny down are run from the PV and not the batts. Makes then last longer. Thanks for sharing. God Bless brother..
@careyjohnson17844 жыл бұрын
Think you learn something new because of you bless you and family
@yankey44 жыл бұрын
Thank you so much!! Why I do this!! God Bless.
@sreekumarUSA Жыл бұрын
112822/0521h PST 🇺🇸 Good day to you, My friend. I'm watching your presentation for the 4th time. I will be using 2 CC for my PV systems, that has been redesigned to charge 24V EVE (2X12.8V series) Previously the system was in 12V configuration. Thanks again and best wishes. 73s...
@yankey4 Жыл бұрын
Cool I am so happy it helps. Let me know If I can do more for you!!
@dangoras91524 жыл бұрын
Bobby if i can't find anymore chevy volt batteries im gonna sell mine if you or you know someone let me know i need more batteries keep it up brother
@yankey44 жыл бұрын
Will you email me at Yank_1978(AT)yahoo.com
@Alpha-ms9nj Жыл бұрын
Great explanation with the diagrams helped. Liked and subbed, thanks for sharing your expertise.
@yankey4 Жыл бұрын
Thank you hope you like it here. god Bless
@tom_olofsson4 жыл бұрын
I did not know this was possible. Thanks.
@chronobot20012 жыл бұрын
Great video. I am thinking of doing this with my small array so that I can flatten the curve and have more consistent power production throughout the day I'm thinking of facing 2panels facing SE and 2 panels facing SW. This would mean morning sun max And evening sun max and combined power at noon. Of course my power output will be less but it will be continuous instead of only peaking for 2 or 3 hours a day. This should allow my freezer to run directly from solar most of the daytime hours and only rely on the battery at night.
@yankey42 жыл бұрын
It works if there's a lot of shade. I seen it work where I was told solar not worth it. One small note. If you get lets say 3 hrs of South sun with out shade but shade on the west and est. It may not be the best for your setup. Maybe do a test and see what works the best. Even if you just lay the PV on the ground for a few weeks testing. Would love to know how it works out for you. God Bless
@chronobot20012 жыл бұрын
@@yankey4 : That sounds like good advice. Doing a test before permanently mounting the panels would be prudent. Thanks.
@3DOutdoors4 жыл бұрын
You have an awesome set up there.
@yankey44 жыл бұрын
Thank you brother. God Bless..
@joytrucker57093 жыл бұрын
Very nice video thanks for taking the time to make. I would have also liked it if you would have added in your diagram where to put the fuses. You just said in all the cables. There are lots of cables in the diagram.
@candidusachonwa217911 ай бұрын
This is very helpful, and educative .❤
@sreekumarUSA3 жыл бұрын
052321/1131h PST 🇺🇸. Thank you for the informative video on the subject. It was explained in simple and clear language for any one to understand the importance of the subject. In fact, for me it was. Thanks again. 73s...
@pnowikow Жыл бұрын
Fantastic information
@yankey4 Жыл бұрын
Thank you
@Trotski2222 жыл бұрын
Awesome, eye opener for me!
@ingdanielluna Жыл бұрын
Hello there. Thanks for the awesome video, very clear information. I have a situation here that I don't know if I will be able to make it work. I have a RV that has a couple of batteries inside and a solar panel on the roof, and they charge through a DC-DC charger that has a MPPT controller and also allows me to charge the batteries while the engine is running. Now when the RV is stopped, with the engine not running, I rely only on solar. The solar panel on the roof, that the DCDC with MPPT is connected to, has 170w, and that sometimes is not enough for my appliances. So I was wondering if I could connect another solar panel to the batteries when I need more power. The second solar panel I want to connect is a portable one, has 200w and has a PWM controller. I would connect it directly to my batteries through some wiring I made, as you depict in your video. Given the differences on the controllers, do you think that could work? I don't think thay the controllers are programmable. Could I end up damaging my batteries? Thank you again!
@yankey4 Жыл бұрын
Can you tell me a bit more. What kind of battery are you using? Led lithium or some other battery chemistry? Thanks.
@yankey4 Жыл бұрын
also if you would like. With a phone # and I will call. Email me Yank_1978(AT)yahoo.com
@christopheranderson82758 ай бұрын
WOW! You're.like my twin brother. We look identical!
@mkhurramsaeed Жыл бұрын
Thank you.
@drut120002 жыл бұрын
Excellent video fella, your really helping me understand how to setup my little solar project, i,m just so confused with the fuse side of things, your diagrams explain a lot but is there any chance you could include where the fuses are to be put regards to the battey and solar panels and charge controller, i know this is quite rude of me to ask but I'm at a loss
@yankey42 жыл бұрын
Email me at Yank_197ATYahoo.com With a phone # and I will call to try to help..
@BrianHelmingcomp2 жыл бұрын
Do each charge controller need to have equal amounts of amps? If one charge controller PV array is lower amperage will the lowest take precedent organ they be different amp outputs and both charge with it's full power input available?
@yankey42 жыл бұрын
No not at all. I have 2 that are max 15 amps 2 that are 80 amps and one that is 45 amps..
@NormanMcGregor4 жыл бұрын
Good informative video Bobby!!
@yankey44 жыл бұрын
Thanks my friend. God Bless.
@toots3020ph2 жыл бұрын
tnx for the video Sir, the content is so informative. i learn a lot. new subscriber from philippines.
@mohsinamir35423 жыл бұрын
I have an Off grid Solar system. The Internal charger can not fully charge the battery , when on full load. Can I add a separate MPPT charge controller with its own 500w panel in parallel to cumulatively charge the battery.
@yankey43 жыл бұрын
Yes Just make sure its the same as you have now or that you can program it the same as the one your using now.
@brunomchopa66415 ай бұрын
Hi Bobby. Thanks very much for your video. I am from Tanzania. I have 9 PV of 100W, 5 PV of 200W and 6 batteries of 200Ah 12V. Plz need your advice on the best way to connect them and what kind and size of charge controller and inverter I should use to make it safe and work properly.
@yankey45 ай бұрын
I can't help with this. With out know your skill lvl and talking on voice. Sorry I don't want you to burn down your house.
@brunomchopa66415 ай бұрын
It is okay Bobby. I hav a technician who is working on this but want to be sure as per your advice. So dont worry Bobby
@RVingwithG2 жыл бұрын
Great information. I just wish you would’ve taken the time to draw out switches, breakers, fuses, and a Shunt in your drawing. maybe you can find one and put it in otherwise great information.
@yankey42 жыл бұрын
I did not do that for a reason. Don't want someone who does not know what they're doing following some wiring someone shows on a video. I would feel bad if they got hurt or someone else got hurt. Next I was just making it as a as universal as possible. If you look. I did not even show volts. Hopefully you understand why. I did what I did now. God Bless
@JazminMartinez-er3kv3 жыл бұрын
Thanks so much!!! Very helpful
@yankey43 жыл бұрын
Thanks so MUCH! Glad it helped..
@stealinghubcaps Жыл бұрын
very helpful, thank you!
@yankey4 Жыл бұрын
Glad it was helpful!
@sethwoot2 жыл бұрын
Wouldn't the biggest reason be more amps in solar array than charge controller can handle like an arry putting out 120 amps on 2 60a controllers?
@yankey42 жыл бұрын
Yes that is true. I just forgot to bring it up. I got a longer video going over why to use multiple controllers. Thanks for pointing that out. God Bless.
@sreekumarUSA Жыл бұрын
Thanks!
@yankey4 Жыл бұрын
Thank you so much!! Glad it helps! That's why we put so much time into making videos. God Bless
@diysolaradventures78943 жыл бұрын
Thanks for the video i have a question if i run two separate 240w strings to two diff charge controllers to one battery do i only have 240w total or 960w total how does that work
@yankey43 жыл бұрын
So if if you have 240 watts of solar and run that back to one CC. Then you do the same thing over. You would have 480 watts of solar. I think thats what your asking. So lets say you have 10 of 100 watt solar panels. You would have 1000 watts even if you put each solar panel on its own CC and all on the same battery bank.. Hope this helps.
@diysolaradventures78943 жыл бұрын
@@yankey4 yes that helps I meant to say two strings of 480w each string I have 4 240w panels I wanted to run each string in parallel because because each panel is 37.2v at 8 amps one charge controller max is only a 100 volts and my other is 125 volts
@gardeniawang Жыл бұрын
I get very confused when systems with different voltage AND amperage are somehow tied together. in the first diagram 6:30 would you say that the two series connected systems are connected to the battery parallel? What voltage range would the battery bank need to be in order to allow both systems work in optimization?
@yankey4 Жыл бұрын
So that's why I did not put volts of the battery's. This would be a series connection. So Pos to neg. If each battry was 6 volts. This would be a 12 volt setup. If they where 12 volts each it would be a 24 volt setup and if they where 24 volts each it would be a 48 volt setup. I made this to show a typical setup. Not to be showing a specific voltage setup. Ie 12 24 48 volt.. The solar also could be 12 each so that makes 24 volts or 50 volts PV. would be 100 volts. As long as the PV volts are higher than the bat bank and your using MPPT Cc. This will work.. MPPT must have a higher volts in from solar than the batts. Sorry spelling on my cell and hard to see. Hope this helps some..
@HariPLTS3 жыл бұрын
Good info sir..
@yankey43 жыл бұрын
Thank you
@jonnyd_vids3 жыл бұрын
Great Video!
@yankey43 жыл бұрын
Thank you!!
@bradlee91843 жыл бұрын
You're the absolute GOAT man!
@yankey43 жыл бұрын
Thanks! Had to look it up LOL..
@JhourladEstrella2 жыл бұрын
Starts at 6:26.
@Pbeas522 жыл бұрын
Very nice, detailed schematic and to the point. A similar video was done at the AltE store in 2019 but it was difficult to follow what was going on, since items used in the schematic weren't labeled. My only question is: can two mppt controllers, different brands but both 24 volts with same amp rating, work in this parallel configuration to one battery bank?
@yankey42 жыл бұрын
yes 100%% all you have to do is keep the setting for each the same. I run 5 mppt CC 3 are the same name and 2 are the same. all 5 work fine together. The key is they must be program the same.
@Pbeas522 жыл бұрын
@@yankey4 Thanks Bobby for your prompt response. I'll subscribe to your channel.
@thomastown76003 ай бұрын
I am trying to understand the wiring control map. You appear to have the negative busbar connected to 1) the negative battery pol 2) and the negative inverter pole. You connect the positive bus bar to the positive battery pol and the positive inverter pol. Then you connect battery 1 positive pole to battery 2 negative pole.
@ianmac29634 күн бұрын
YES ..... i cannot understand why no one else has commented on this ................. assuming two 12v batteries ...... the diagram is WRONG
@fredrundle21173 жыл бұрын
Do u have to hook positive to one end of battery bank and negative to the other end of battery bank
@yankey43 жыл бұрын
Sorry I do not know what your asking. If you can ask me one more time maybe?
@TheBillythekid20104 жыл бұрын
Hey that is a good idea, on muti CC! I'm going to make a play list on my other channel! Thanks Bobby on the information, GB!
@yankey44 жыл бұрын
Thanks brother. God Bless.
@WereReallyRelayCamping4 жыл бұрын
the other advantage is if a charger lets the magic smoke out, your only down 50% till a new one is fitted...
@dgt38003 жыл бұрын
Thank You for the info!
@yankey43 жыл бұрын
Your welcome. Glad to help. God Bless
@brotheradam3 жыл бұрын
I am looking at running more than one charge controller because I need to feed divergent voltages. I need a six volt system and a twelve volt system and a 24 or 48 main system. Because of my security and other systems. Have found I can feed a load of tv and computer gear from a regulated 12 volt system
@yankey43 жыл бұрын
Yes I help a lot of RV/Camper peeps out with just that a 12 volt DC setup for there computers TV's phones and more. Do you post videos? If so would love to see them. Thanks and God Bless.
@rongray41187 ай бұрын
Bobby - would a combiner box work to do what your bus bar configuration is showing? Hoping to keep the system configured where a breaker or fuse will trip prior to the inverter. Our problem is setting up a (2) Absolyte GX 48volt/2,000 Amp hour (AGM) telecom battery banks and keeping them full. We will have well above 12kw-15kw in solar panels/strings and knowing if a string of panels is not going to shut the entire system down is worrisome.
@yankey47 ай бұрын
So if your saying using a combined box as your buss bars. No they can't care the amps in and out. Also you may find you stress out the brakes. But it may work. Would keep I eye on them for heating troubles
@rongray41187 ай бұрын
@@yankey4 Thank you for clarifying the use of the combiner box!
@jub79142 жыл бұрын
thanks for the vid, lots of good info. one question ref multiple cc, can i use an 1 MPPT and a 1 or 2 PWM seperate panels on each but feeding the same battery bank ?
@yankey42 жыл бұрын
If the battery is lead-acid chemistry yes. But don't use PWM on lithium batteries. Was told that the PWM or pulse-width modulation will mess up a lithium battery over time. Hope this helps.
@jub79142 жыл бұрын
@@yankey4 thank you. Yes lead acid. Thanks again
@MrCgreenization7 ай бұрын
Would using two different charge controllers (CC) work in a setup where one CC is attached to a PV array and a second CC is attached to a wind turbine, then both CCs going to one battery bank via bus bars?
@yankey47 ай бұрын
Yes! That's how it's dune
@kirbyspencer5383 жыл бұрын
Bobby, educate me. If my battery has a bulk charging limit of 30 amps, normally I would apply a 30 amp charge controller and know that I won't exceed that limit. BUT, if I hook up a number of independent charge controllers in parallel, what is going to limit the current? If I hook up a couple of 30A (or even 20A) charge controllers at the same time, with the same programming I will exceed the bulk charging rate by a long shot.
@SaurabhDarole3 жыл бұрын
Good information
@yankey43 жыл бұрын
Thank you
@avlisk Жыл бұрын
I want to add more panels that will exceed the capability of just one Renogy Rover CC. So, I bought a second 20amp Rover. Renogy says I can't do it. What do you say? Thanks.
@yankey4 Жыл бұрын
If they are the same CC. Then You can do it. They are just trying to make you upgrade it sounds like to me..
@wally1957 Жыл бұрын
I have a charge controller that states it is only rated for 500 watts and 40 amps. Since 500 watts equals about 5 amps why am I limited to just 500 watts? Just thought you might know. It is EPEver brand..
@yankey4 Жыл бұрын
500 watts is 41 amp at 12 volts.. 500 watts at 24 volts is 20 amps and at 48 volts 500 watts is 10 amps.
@sarahgrooms5606 Жыл бұрын
I have a 1500watt inverter with a 100 amp controller. Will these work together? I am just setting it up. Will a 12v 200ah battery work with this as well? I am not running a whole house just some small appliances and 3.3c refrigerator and 110 air-conditioned, just enough for a small room.
@yankey4 Жыл бұрын
Yes That will make a nice setup. Would love videos !!
@sarahgrooms5606 Жыл бұрын
@@yankey4 ok, as soon as I get it set up. I am adding a little at a time so it won't cost to much at once. Thank you for your help. I am an old lady trying to live off grid eventually.
@crabbingclammingboatcampin49622 жыл бұрын
It appears that your batteries are wired for 24 volts, as the left battery has its positive side on the bottom, wired to the negative on the bottom right side battery. Should be made clear for newbies looking to wire a 12V battery bank with 2 CC's. Or, am I reading this incorrectly?
@yankey42 жыл бұрын
Well I did not make that clear. Here is the main thing. Now you can buy 24 volt batts and that would make 48 bank or could been 12 volt batts to make a 24 volt bank. Or Two 6 volt batts to make 12 volts. Sorry I sould have made it clear. My setup is 24 volts how ever..
@crabbingclammingboatcampin49622 жыл бұрын
@@yankey4 Thanks for reply. Except for that small detail, a very good and informative video. I learned that my mismatched solar array needs another CC. Thank you for the lesson. Best regards, from northern Calif.
@misterbigstuff85033 жыл бұрын
Hi, thanks for your videos. Can i connect a (litium )battery battery bank to a solar charge controller and wind charge controller at the same time? I have 24v solar charge controller and 24 v wind charge controller.
@yankey43 жыл бұрын
Yes as long as you can set the charge controller parameters to match your lithium battery requirements.
@misterbigstuff85033 жыл бұрын
@@yankey4 ok, thanks
@godfreymuzavazi146Ай бұрын
I have a hybrid inverter working already. Can I add 2 independent solar charge controllers connected to their 2 solar panel arrays to the existing system, following your wiring diagram?
@yankey4Ай бұрын
You can add it. Just make sure the setting are the same on the CC for your bank yes.
@godfreymuzavazi146Ай бұрын
@@yankey4 Thank you. And just to make sure, the original connection from the battery to the hybrid inverter will stay as the only connection from the busbar from to the hybrid inverter. It will be the only connection of power from the busbar. That's correct, right?
@yankey4Ай бұрын
@godfreymuzavazi146 well that depends on your setup. But it will be fine to do that. You just don't want a lot of wires Connected to your batteries.
@yankey4Ай бұрын
@godfreymuzavazi146 thats why we us Busbars
@lahnkopp99094 жыл бұрын
awesome info
@yankey44 жыл бұрын
Thank you!! God Bless
@MrTubeman123456 Жыл бұрын
good video its looks like battery bank is 24 volts im using 5 batteries 12 volt with different size panels 2 controller so the panel with the lowest power will win out over others correct ?
@yankey4 Жыл бұрын
Kind of. If they where all on the saem CC then yes. If you have them broken up no..
@MrTubeman123456 Жыл бұрын
Thanks for the reply
@Swenser2 жыл бұрын
While one CC is charging the battery, the other CC may be trying to read the Voltage of the battery, but instead it will be reading the value of the paralleled CC giving a chance that the reading CC will stop charging. Right?
@yankey42 жыл бұрын
No It will see the batt as it's is. Now yes the volts might be a bit higher than if no solar but it's not going to have trouble. I have seen my own be less than a 10th off at a time. It's never been a bit of trouble. Hell now inviters come with more than one CC in them. They do the same as I show in this video there just all in one..
@ChileExpatFamily4 жыл бұрын
Can you wire in controllers from different sources like hydro and solar?
@yankey44 жыл бұрын
100% just need to have the setting the same so when your max volts things like that..
@FromMetayou2 жыл бұрын
One solar panel one agm battery one lithium battery used separately ,my question is can I use 2 charge controllers with the one solar panel
@yankey42 жыл бұрын
No they would be fighting over the Max Power Pont.
@andyt60872 жыл бұрын
Hey quick question Can i connect two controllers but one will deliver power from parallel 8 x 100 w panels and other deliver power from series connection 330w x3
@yankey42 жыл бұрын
100% yes. That's one thing this works good for too. Did a camper few weeks ago just like that. well really close
@NYCamper62 Жыл бұрын
Can you clarify programable? For example two pwm controllers set to charge a lead acid bank, most other settings are not like an mppt.
@yankey4 Жыл бұрын
So if they have the same setting and are safe to use on your battery chemistry. Then your 100% fine doing this. This is a common thing. Hope this helps some..
@ntechsolutions10713 ай бұрын
If battery is charging with 20A with one charge controler when you connect the second charge controller is it charging with 40A?
@yankey43 ай бұрын
Yes if each CC is working at max 20 amps. You would be charging at 40 amps
@ntechsolutions10713 ай бұрын
@@yankey4 Thanks.
@dannymitchum53 жыл бұрын
Thank you. Thank you.
@offgridhillbillyhomemade64603 жыл бұрын
Awesome video. I have mixed panels on my system. 3 200 watt panels an 4 100 watt panels in parallel. Then 3 200 watt panels an 3 100 watt panels to 2 charge controller's a 50 and a 60 amp. Am I loosing much power that way.??
@yankey43 жыл бұрын
Well hard to say 100% with this info. I would need more like VOC. But I would say yes. I would put all the 200 watts on the 60 amp and all the 100 watts on the 50 if you can do it with out going over the max input volts of each CC..
@offgridhillbillyhomemade64603 жыл бұрын
@@yankey4 will try that an get back to you dan
@offgridhillbillyhomemade64603 жыл бұрын
That's what I going to do .an I have an extra 30 amp for what's left over . Yesterday Carolyn told me we hit 100.6 amp coming in.from 1900 watts of panels. So I should almost double that when I wire it properly. Will see . An I will do a video on it also for my channel. My motto. No plan just a desire.
@yankey43 жыл бұрын
@@offgridhillbillyhomemade6460 Nice 100 amps from one CC is a LOT !! Most CC max out at 85 amps. Cool will come over and sub.
@offgridhillbillyhomemade64603 жыл бұрын
@@yankey4 sir. I have 2 cc a 50amp and a 60 amp. Sorry for confusion.
@abhajihadi3 жыл бұрын
Hi thanks How to wire two mppt controller to a 12v system? You have caption it one battery but show 2 batteries.
@yankey43 жыл бұрын
That's 2 batteries wired as one big one. If your just using one. The pos for each CC go's to the pos on the batt and the 2 negs from each go to the neg on the batt.. Just as if you where putting one CC on one battery. Just do the same for the second one.
@abhajihadi3 жыл бұрын
@@yankey4 Thanks
@brettjeffery8160Ай бұрын
Can it work on a different watts panel like 250watt 4 on a different charge controller and 180watt different charge controller let me let know if it’s okay to connect
@yankey4Ай бұрын
Yes that's one of the reasons to do it..
@PRASTRO4 жыл бұрын
💪🏼🤙🏼👍🏼
@yankey44 жыл бұрын
Thank you..
@igazelle912 жыл бұрын
Thx !!
@thebatmom Жыл бұрын
Can you come to missouri and help meeeeee, i live off grid , cant seem to get my solar kit to work correctly & all the numbers (amps, volts, etc.) make my brain hurt. Living on a generator, cant afford the gas to keep it powered .
@vincentsgaming4 ай бұрын
Im confused. This shows 2 batteries not 1 like title states.
@yankey44 ай бұрын
One battery bank. A bank is 2 or more batteries.
@ECMVAQ1372 жыл бұрын
I am still puzzled some say there is no 12, 24 or 48 Volt panels and that how you hook them up is what determines the volts and amps coming to CC.
@yankey42 жыл бұрын
So there are 12 24 and 72 volt and even higher voltage PV modules. The more cells in a PV modules for the most part the higher the out put volts. This is not 100% the case. So what is true is this. Each cell is about 3.2 volts. So if we just series 4 cells. That would give us 12.8 volts. So the more cells in series the higher the out put volts are. This the lower the amps. Hope this helps some.
@ECMVAQ1372 жыл бұрын
@@yankey4 yea that is interesting thanks for your reply! Now that I am into it my interest are spiking lol
@geoffreyberry95803 жыл бұрын
Hey Bobby, quick question about the PIP inverters. The low voltage battery disconnect has a default of 21V, but I change mine to 23 V in the settings. If the batteries run down to 23V at night, the inverter shuts off, but when it gets back to daylight, the inverter switches back on to start charging and it will eventually start producing power again when the batteries get a bit of charge. However, the low voltage battery cut off defaults back to 21V. So the next time the battery is getting low the inverter shuts off at 21 V instead of 23V and this is not good for me because my batteries tend to get out of balance at the lower end. The low-voltage cut off seems to be the only Setting that goes to default whenever the inverter turns off, everything else seems to be saved in memory except that. Have you or anyone else had that experience or know how to solve it?
@yankey43 жыл бұрын
Mine will let me set it to 20 volts and stay there. So I do not know why yours would do that. I have not ever had someone ask me that nore have I seen it. I am sorry about that..
@yankey43 жыл бұрын
Have you tryed to set it to like 24 volts? Then see if it will stay there? I know mine is set for 20 volts but I do not hit it as I am on grid. So when the Pip hits 22 I go back to grid at 22.. At 20 It cuts off and then needs to rechager like you say. Sorry about this. I wish I was more help..
@geoffreyberry95803 жыл бұрын
@@yankey4 I have not tried 24 V specifically, but I've done different voltages between 22 and 23.5. I don't think it's going to make much of a difference because once the inverter turns off, whatever settings I had for that particular value goes back to default 21v. My inverter doesn't turn off every night, if I have a bad day then I can expect the inverter to turn off at some point during the night. But if I have a medium to good day, then I'll definitely go throughout the night into the next morning. Basically any time I know I had a bad night, I have to go into the computer to change the settings for the low-voltage cut off. I've even tried to make changes to the settings on the Control Panel itself.
@tennesseehillbilly58833 жыл бұрын
Can you run 2 charge controllers from the same solar array and charge 2 separate battery banks?
@yankey43 жыл бұрын
No one Set of solar for one set of batts. But you can have more than one CC on the same batt bank.
@chadwolfeschledgelsteinhau96973 жыл бұрын
Dude! Take a chainsaw to them trees!
@yankey43 жыл бұрын
If they where mine I WOULD LOVE TO!! HEhe I lay in bed at night thinking about them trees lol
@jha5301 Жыл бұрын
can you show us the fuses.
@yankey4 Жыл бұрын
No. Not with out knowing the size of your wire the length of wire and how much power your pushing down the wire. This is why I did not show it here.. Sorry
@lloydscarlett96503 жыл бұрын
I really need an answer
@jonathanstarkie58683 жыл бұрын
Hi, Please be careful when giving advice.... I know you mean well but some things you say are technically incorrect. To get around the shading issue, you simply need to change the order the solar panels are connected... basically make the solar panel wiring match the sun - if in the morning sun there are 4 panels shaded, make sure they are connected together and at the end of the series string. I have two 495w 50 volt (+/-) ja solar panels connected in series to three other manufacturers panels - all rated between 235w to 245w at 24.7 (ish) volts (and at least ten years old). I took the daily generation from 4kwh to above 9kwh simply by changing the dc wiring order. Connecting multiple solar panels of different specs is perfectly ok just use common sense and bundle similar panels together. I use the JA solar at the start of my string because they have the largest power output and basically 'prime' the system at sunrise. Give it a go - if you don't see it you won't believe it! ;)
@yankey43 жыл бұрын
I know what your saying. I have worked in solar for 20 years. I know what I am saying. Your PX that is in shade will still lower the over all power the PV on each string can make. This is way a LOT of grid ties and now off-grid invters have multiple charge controllers or multiple string input. SO that the lower stingers do not bring down the higher string. and No you can blow things up having different {V that not all the same on the same CC. If they are close in specs a few volts that's ok. But I did say that in the video. Your right also. Just as long as things are CLOSE!
@yankey43 жыл бұрын
Right you can't have them on the same string. Still if there on the same CC this will lower the max power you get.
@jonathanstarkie58683 жыл бұрын
It occurred to me last night (just as I was closing my eyes!) that you might be thinking of Current/Amps as opposed to voltage?? It says very clearly on all of my solar panels that the max system voltage is 1000vdc.... Because voltage of panels is added together (when panels are connected in series) what difference would it make having e.g. two 50 volt panels connected in series to ten 24 volt panels?? However you look at it it's inevitable that one or more panels will be passing a dc voltage much higher than their individual rating. 24v + 24v + 24v + 24v + 24v +24v is more or less the same as 50v + 50v + 24v + 24v as long as it doesn't go over the charge controller max input of 600vdc it doesn't make a difference what voltage individual panels are? What I've learned is what does make a difference , is WHERE the panels are in the string. It's important that this is clear to people as it may allow systems to work more effectively in limited spaces. The point I'm trying to make about having two 50v panels connected to 24v panels later in the string (in my particular situation) is they provide good/excellent power starting at sunrise from a very limited floor space. By the time the sun hits the 24v panels it's much higher in the sky. This covers a larger space of ground (that in the morning sun is shaded). I've got space there for 10+ 24 volt panels. This is giving me a good consistent high power output all through the day. Nothing is pulling anything down! At some point I MAY upload some videos of the system I am still installing - mainly because my experience of this 'industry' to date has been truly shocking, so it might help people... Don't get me wrong - I'm not a tree hugger/hippy/ecowarrior - I'm a network engineer who was forced into looking at all this when my G/F bought a completely off-grid house in Manchester/UK - for cash, with no survey and no clue about renewables. I've HAD to make it work with considerable restrictions. (Manchester UK is hardly thought of as being the ideal place for off-grid living) Try it!
@yankey43 жыл бұрын
@@jonathanstarkie5868 Ok Now I see. Yes your right about that sorry. Wow Would love to see some videos! Thanks for sharing.
@dylanstuckless56693 жыл бұрын
I have 5 batteries and 2 charger controllers atm not connected to a buss. Should i have them connected to 2 different batteries or the same one? Or even on opposite ends of the bank?
@yankey43 жыл бұрын
If no Buss bars then I would do opposite ends. This will help keep the wires down on the batts. Letting you keep the wires tighter. Is this lead batts or Lipo? If Lead it works best to keep the on opposite end of the batts. When you get a buss bar it will be fine. Most trouble comes from not getting the wires tight. So this helps..
@dylanstuckless56693 жыл бұрын
@@yankey4 they are lead adn awesome thank you so much
@dylanstuckless56693 жыл бұрын
@@yankey4 my next issue would be that i would have to make my wires from my controller to the opposite end of my bank about 3ft long rather than 10". would this cause any issue. they are a 10g wire and this is all a 12v set up
@yankey43 жыл бұрын
@@dylanstuckless5669 Wow 10 AWG is small. I would go with bigger wire. You do know that a set of buss bars cos like 24 bucks each. I do not know the size you would need but I can share a link on the ones I use. I have 3 sets in my setup now and use them on all the solar I help clients. ebay.to/3k2Edos
@dylanstuckless56693 жыл бұрын
@@yankey4 i dont have more than 30amps so i didn't think i needed bigger than 10g wire from charge controller to bank. I use 1g wire from battery to battery tho. Awesome thank you
@mossymaple2 жыл бұрын
I Hello is this wiring diagram a parallel or series controller setup? I'm confused? I've been looking for videos and most only show what's called wiring two controllers in parallel. What is this called that you are doing compared to the so called parallel videos I have come across? Thanks for your time.
@mossymaple2 жыл бұрын
The parallel connections on the other videos showed a posative from controller 1 going to posative of array 1 but the negative of solar array 1 was connected to controller 2? Say whaat? Totally confused on what this all means compared to your wiring.
@yankey42 жыл бұрын
yes this is Parallel that's how you wire them. YOU DO NOT wire them in series