Gday, This video I make new pins a bushes for a Yammer Excavator, this machine belongs to a good mate of Trents, I really hope you enjoy the video and thanks for watching, Cheers
Пікірлер: 205
@CraigLYoung2 жыл бұрын
Thanks for sharing 👍
@MattysWorkshop2 жыл бұрын
Appreciate you watching mate, cheers
@paulpipitone83572 жыл бұрын
Look Out Curtis Here comes Matty....... Nice Job Matty you are really coming along love this channel.....
@MattysWorkshop2 жыл бұрын
Gday Paul, I’ve got a fair bit of learning to do to be half as good as Kurtis mate, thanks for watching and commenting, Cheers
@MrFactotum2 жыл бұрын
nice one Matty your lifting device came in handy cheers Kev uk
@MattysWorkshop2 жыл бұрын
Gday Kev, I’ve used the crane on the trolley so many time I wonder how I did without it, thanks for watching mate, cheers
@Rustinox2 жыл бұрын
That's exactly the kind of jobs I really like to do. A bit of everyting.
@MattysWorkshop2 жыл бұрын
Gday Rustinox, this was a really enjoyable job, plenty of turning involved that’s for sure, thanks for watching mate, cheers
@RobertBrown-lf8yq2 жыл бұрын
Good onya Matty, for helping out the young bloke. 👏👏 First year apprentices don’t earn a lot, so your generosity is doubly valuable. Thanks for sharing mate 👍 Regards Robert
@MattysWorkshop2 жыл бұрын
Gday Robert, Zach is a top young bloke that’s keen to work and work hard, My oldest boy Trent and Zach left school and started there apprenticeships on the same day, there both doing really good, thanks for watching and commenting mate, Cheers
@DCT_Aaron_Engineering2 жыл бұрын
G’day Robert. Young Matty goes hard doesn’t he. Does some nice work out of his home shop.
@DCT_Aaron_Engineering2 жыл бұрын
Good job Matty. 500 thumbs up 👍 can’t be wrong 🍻
@MattysWorkshop2 жыл бұрын
Gday Aaron, thanks for watching mate, cheers
@peterburke14932 жыл бұрын
Always a pleasure. Thank you.
@MattysWorkshop2 жыл бұрын
Thanks very much, appreciate you watching and commenting, cheers
@ChrisR25172 жыл бұрын
Only thing missing was Homeless.😉 Good job so far.
@MattysWorkshop2 жыл бұрын
Gday Chris, one day I might have a shop dog, thanks for watching, cheers
@ChrisR25172 жыл бұрын
@@MattysWorkshop I meant...nearly Kurtis Material.
@Footlamp2 жыл бұрын
Really appreciate you showing the imperfections and mistakes as well as finished products. Gives hope to the minions.
@MattysWorkshop2 жыл бұрын
Gday, I don’t mind showing the mistakes, plenty don’t sadly and we are only human, thanks for watching, cheers
@wirenut0032 жыл бұрын
Matty you made the part better then new, great video you take the time and explain all your moves on the project for the viewers. CHEERS😀
@MattysWorkshop2 жыл бұрын
Gday, thanks for the kind words mate, cheers
@TheKnacklersWorkshop2 жыл бұрын
Hello Matty, Nice work there and for a good cause... It's important to help the youngsters, well done... Take care. Paul,,
@MattysWorkshop2 жыл бұрын
Gday Paul, the young fella who owns the machine is really having a go which is great to see, thanks for watching and commenting mate, cheers
@SB-hi9nj2 жыл бұрын
Nice idea on putting the small groove for loctite 👍
@MattysWorkshop2 жыл бұрын
Gday, this works well really, thanks for watching, cheers
@MrPossumeyes2 жыл бұрын
Cheers Matty. 👍
@MattysWorkshop2 жыл бұрын
Thanks for watching, cheers
@MartsGarage2 жыл бұрын
Excellent work, Matty. Good proper job old school engineering.
@MattysWorkshop2 жыл бұрын
Gday Mart, this was a really enjoyable job to do, thanks for watching and commenting mate, Cheers
@SgtCude592 жыл бұрын
Nice big job lot of things to make
@MattysWorkshop2 жыл бұрын
Gday, certainly plenty of machining done mate, cheers
@Warped65er2 жыл бұрын
Geez Matty, Kurtis asks you make some parts for his Hydroptic, and a week later you start to venture into his territory repairing heavy equipment. Lol .. j/k (ok .. maybe not so heavy) Good on you helping the young fellow out. Very well done video too. 👍
@MattysWorkshop2 жыл бұрын
Gday, it’s was funny it all happened at the same time, I do t think Kurtis has anything to worry about mate🤣, what I do in a week Kurtis does in a day, thanks for watching, cheers
@alfadoofus2 жыл бұрын
Good job solving the problems on how to with what you have. What cured me as a young man being hard on equipment is when I had to fix it or trade work to have someone like you help me fix it . They would not take money and made me work it off. Great video can't wait for part 2.
@MattysWorkshop2 жыл бұрын
Gday, the barter system can work well especially when money is a bit tight, thanks for watching, cheers
@jonsworkshop2 жыл бұрын
Top Drawer stuff Matty, good on you for helping the young lad out👏👏👍
@MattysWorkshop2 жыл бұрын
Gday Jon, it’s always good to help someone out mate, thanks for watching, cheers
@RyJones2 жыл бұрын
Good on you helping out a young lad
@MattysWorkshop2 жыл бұрын
Gday, Zack is a really good bloke and not shy of work, thanks for watching, cheers
@patrickcolahan74992 жыл бұрын
Great job Matty. CEE would be proud of this. Thanks very much for sharing.
@MattysWorkshop2 жыл бұрын
Gday Patrick, this is definitely a lot smaller scale then CEE, thanks for watching, cheers
@patrickcolahan74992 жыл бұрын
@@MattysWorkshop Not the size that I was commenting on, but the quality of work. Have a great day Matty.
@williamfissell16942 жыл бұрын
Thank you for showing this. I have to do the exact to my 53 ferguson with Pippin excavator, The pins are as tight as a hot dog in a hallway.
@MattysWorkshop2 жыл бұрын
Gday, I hope the video helps, sounds like it’s time for some TLC, Cheers
@kentuckytrapper7802 жыл бұрын
Excellent job matty, looking forward to the next video, stay safe man...
@MattysWorkshop2 жыл бұрын
Gday, might only be a short video next week, thanks for watching mate, cheers
@CraigsWorkshop2 жыл бұрын
I was wondering when your next video was coming out 👍 Checked youtube and it was released 22 seconds ago. Great job on the bushes and sleeves, and the editing is great too - nice pace, and no slow sections. Very easy to watch. Keep up the great work mate.
@CraigsWorkshop2 жыл бұрын
PS: You could alwsys line bore the bit that won't fit in the mill.
@MattysWorkshop2 жыл бұрын
Gday, thanks for the positive feedback, this was a hard one to edit really, thanks for watching, cheers
@CraigsWorkshop2 жыл бұрын
@@MattysWorkshop It has paid off though 👍 Cheers, Craig
@MattysWorkshop2 жыл бұрын
@@CraigsWorkshop I could off lined bored it on the mill but told the wife I need a bigger machine 😉
@CraigsWorkshop2 жыл бұрын
@@MattysWorkshop 🤣 How did that go down?
@matspatpc2 жыл бұрын
That's a nice job well done! Always love the finish you get on 4140 (or 4340 as is the one I can easily get) - and as you demonstrated, you need to make sure you take decent cuts. Being feeble and taking light cuts, not so nice finish...
@MattysWorkshop2 жыл бұрын
Gday, heavy cuts are the key to a nice finish but it takes a bit to get the chip to break, cheers
@Dudleymiddleton2 жыл бұрын
I can see the urgency of pressing them in as the surrounding metal is shunting the heat into the freezing cold bushing making it fatter faster!
@MattysWorkshop2 жыл бұрын
There’s not much time to play with mate…
@outsidescrewball2 жыл бұрын
Nice build…koko
@MattysWorkshop2 жыл бұрын
Gday Chuck, thanks for watching and commenting, cheers
@Steviegtr522 жыл бұрын
Wow nice one. We'll have to start calling you, Matty's heavy industry repairs.. HaHa.. Regards. Steve.
@MattysWorkshop2 жыл бұрын
Gday Steve, you never know what will happen here mate, Cheers
@pgs85972 жыл бұрын
G'day Matty. Well done fixing the pins and bush's, should keep the young fella working for some time. Do we call you mini Kurtis now:-) Cheers Peter
@MattysWorkshop2 жыл бұрын
Gday Peter, It’ll be a while until I produce jibs as nice as Kurtis’s mate, thanks for watching, cheers
@MrGeroth2 жыл бұрын
Good job Matty.
@MattysWorkshop2 жыл бұрын
Thanks very much Gerald, cheers
@houseofbrokendobbsthings55372 жыл бұрын
Awesome job Matty! Likely never been that good! Factory certainly wasn’t that precise.
@MattysWorkshop2 жыл бұрын
Gday, I think this repair should hold up alright for a while, it’s definitely a lot tighter then it was, thanks for watching mate, cheers
@rypkepaulusma2 жыл бұрын
Well Matty, I think you might bring a visit to Kurtis for the lineboring job 🙂Great video.
@MattysWorkshop2 жыл бұрын
Gday, I did think of that but I’ve told the wife I need a bigger milling machine and so far I think she’s all good with the idea😉, thanks for watching, cheers
@jimsvideos72012 жыл бұрын
Well done Matty.
@MattysWorkshop2 жыл бұрын
Thanks very much Jim, cheers
@mattpage98262 жыл бұрын
I'm with the others on the problem solving and helping the young guy out. Also just noticed that your up to 13.6k subscribers! Your gona hit that 20k in no time!
@MattysWorkshop2 жыл бұрын
Gday, it’s always good to help others, the subscriber count is still going up mate, Cheers
@Dudleymiddleton2 жыл бұрын
It's very similar to the sort of stuff Kurtis fixes - just a bit smaller! Top job as usual, Matty thanks for sharing.
@MattysWorkshop2 жыл бұрын
Gday, watching Kurtis do these types of jobs gave me the confidence to have a go myself, there’s lots to learn watching his videos, Cheers
@mattmanyam2 жыл бұрын
Such a good channel about trains... 😁
@joell4392 жыл бұрын
Well done 👍
@MattysWorkshop2 жыл бұрын
Thanks mate, cheers
@Mr.Avuncular2 жыл бұрын
Well done Matty...it's awesome to see the magic us older crowd has up our sleeves to help out in a pinch to make a busted piece live to work another day!💪👍😁
@MattysWorkshop2 жыл бұрын
Gday James, it’s always good to make things right again, thanks for watching, cheers
@ronwilken52192 жыл бұрын
Hi Matty, for your oil/grease grooves look up that young, I think Philippino machinist who works off the floor with the most basic of tools. He produced an attachment for the tool post on his lathe that while the chuck turns the work, via pair of beveled gears, home made, and a Conrod like an engine would use, the tool gets moved in and out of the bushing producing a perfect "X" groove that doesn't exit the bush thereby keeping the oil inside the bush. I'll see if I can find the link. Otherwise, thanks for posting. Greetings from Canada's banana belt. 👍🍌🇨🇦🕊️🇺🇦🤔🇦🇺🤞
@NellsMechanicalManCave2 жыл бұрын
Excellent work as always Matty !
@MattysWorkshop2 жыл бұрын
Thanks very much mate, cheers
@chrisnorth34582 жыл бұрын
Good on you for helping the young guy out with his excavator repairs
@MattysWorkshop2 жыл бұрын
Thanks Chris, he’s a good lad, cheers
@TrPrecisionMachining2 жыл бұрын
good job matty
@MattysWorkshop2 жыл бұрын
Thanks mate, cheers
@grahamlucas60332 жыл бұрын
Nice job Matty and looking after the young bloke that's having a crack. Good Man👍
@MattysWorkshop2 жыл бұрын
Gday Graham, he’s certainly have a big crack and it’s bloody good to see, thanks for watching, cheers
@joedowling54522 жыл бұрын
Another job well done. Thanks for letting us all look over your shoulder as you work.
@MattysWorkshop2 жыл бұрын
Gday Joe, this was a good job to take on, there’s quite a bit of machining involved but working to tight tolerances Is always interesting, thanks for watching, cheers
@hilltopmachineworks21312 жыл бұрын
Good repair. Hopefully that will last awhile.
@MattysWorkshop2 жыл бұрын
Gday Tom, I think it’ll last a good while, certainly tighten it u a lot anyway, thanks for watching mate, cheers
@p-niel53282 жыл бұрын
Love watching this kind of Videos. Saving to Buy a small tool master Lathe to try and learn more.
@MattysWorkshop2 жыл бұрын
Gday, that’s awesome you getting a lathe, if you have any questions please ask, it really is a great hobby, cheers
@p-niel53282 жыл бұрын
@@MattysWorkshop Thank You.
@OldIronMachineWorks2 жыл бұрын
Very nice Matty
@MattysWorkshop2 жыл бұрын
Thanks very much Gary, appreciate you watching and commenting mate, cheers
@josephlovell69512 жыл бұрын
Hold on this is not CEE. LOL. GOOD ON YOU. Way to hepl out. And it was a cool project.
@MattysWorkshop2 жыл бұрын
Gday, it’s always good to help someone out, thanks for watching, cheers
@markwatters68752 жыл бұрын
Great to see the youngns having a go mate. Thanks for helping them out. See ya in the next one, have a good one 👍🇦🇺
@MattysWorkshop2 жыл бұрын
Gday Mark, it is really good to see young ones having a go, Zach has a brilliant work ethic, Cheers
@alanshomeworkshop2 жыл бұрын
Excellent work Matty and nicely edited video. Cheers, Alan.
@MattysWorkshop2 жыл бұрын
Thanks very much Alan, appreciate you watching and commenting mate, cheers
@berniebourke52252 жыл бұрын
another great video , thanks for making them always interesting
@MattysWorkshop2 жыл бұрын
Thanks very much Bernie, appreciate you watching and commenting mate, cheers
@hedning0032 жыл бұрын
i made a similar job a couple of years ago,a digger-addon for an atv,so a bit smaller stick,whit the young guy watching..when i put it all together i said "damn..it actualy looks like i know what i'm doing here" the youngster looked at me in a very strange way..and i lost it completley🤣
@MattysWorkshop2 жыл бұрын
And he’s probably still wondering what you meant 🤣, thanks for watching mate, cheers
@Just1GuyMetalworks2 жыл бұрын
Way to help out the young fella, Matty. Helping one another is good trait to pass on to the next generation. Plus maybe you'll get some free labor in the future 👍😁👍. Cheers!
@MattysWorkshop2 жыл бұрын
Gday Chris, it’s a good way to go and the young lad who owns this isn’t shy of work, he’s doing alright for a 16 year old, thanks for watching mate, cheers
@merlepatterson2 жыл бұрын
Nice work Matty
@MattysWorkshop2 жыл бұрын
Thanks very much, appreciate you watching, cheers
@chrisbaker38442 жыл бұрын
Really good of you to help out you sons young friend. In this day and age it is so hard for young people to start out that they need all the help that they can get. When my son started some of the tools he needed were over a days pay.
@MattysWorkshop2 жыл бұрын
Gday, it’s hard to find young people willing to have a go now sadly, thanks for watching, cheers
@graemechalmers31712 жыл бұрын
Good on you Matty you have a heart of gold helping out the you fellow another great video keep them coming great work mate .
@MattysWorkshop2 жыл бұрын
Gday Graeme, Zach is my oldest boy Trent best mate and there both having a big go which is great to see, there not shy of working and putting the hours in, cheers
@jimpritz41692 жыл бұрын
Great job on this one Matty. Really liked the wheel cylinder hone tip. What a great idea. Very big of you to help out a young person trying to make a living. Thanks for the video.
@MattysWorkshop2 жыл бұрын
Gday, the wheel cylinder hone works a treat, thanks for watching, cheers
@tiredoldmechanic17912 жыл бұрын
I've never liked pins with grease holes in them. They always break at the grease hole whether it's halfway through or all the way. I try to convert to greasing the bushing bore. I've converted many pins to external threads on one or both ends because I've seen too many with cross bolts or end bolts shear off the bolts so the pin comes part way out. It also helps to keep the flanges from spreading. The machines aren't designed for sideways pressure but the operators never seem to know that.
@MattysWorkshop2 жыл бұрын
I have seen a few pins break through the grease hole but they wanted to keep it the same, thanks for watching, cheers
@SoBoring136 Жыл бұрын
The Al960 B is performing well
@MattysWorkshop Жыл бұрын
It’s going really good mate, money well spent
@MatthewTinker-au-pont-blanc2 жыл бұрын
First class job on the editing! A very interesting video! Cheers Mate!
@MattysWorkshop2 жыл бұрын
Thanks very much for the positive feedback mate, cheers
@BenButler12 жыл бұрын
Nice #flies
@graedonmunro17932 жыл бұрын
good job matt, i saw a wheel cylinder hone!( very handy)
@MattysWorkshop2 жыл бұрын
Gday, the cylinder hone worked great to knock the burrs off after threading, thanks for watching mate, cheers
@paweisyn7446 Жыл бұрын
Hi. I do all this now with my Komatsu PC30-1.
@TheMiniMachineShop2 жыл бұрын
Hey Matty, your welding is appearing a lot more professional!
@MattysWorkshop2 жыл бұрын
Gday Dave, I’m getting there mate, thanks for watching, cheers
@terrycannon5702 жыл бұрын
Thanks Matty
@MattysWorkshop2 жыл бұрын
Thanks for watching mate, cheers
@eyuptony2 жыл бұрын
Superb job Matty. I thought I was watching Max Grant's channel there for a minute with the digger parts. What more can I say? Tony
@MattysWorkshop2 жыл бұрын
Gday Tony, I’m still a few years off being up to Max’s standards mate, Max is an amazing machinist, thanks for watching, cheers
@samrodian919 Жыл бұрын
Great job so far Matty, watching this 3 months down the line lol you are doing that young man a huge favour and you're a top bloke for doing it mate. I hope at least the lad is going to pay for all that 4140 as I suspect it's not cheap to buy. Looking forward to watching part two mate. Cheers, Sam
@MattysWorkshop Жыл бұрын
Gday, to get this done at a machine shop would of been far to expensive, he did buy the materials for the job, even that was getting up there for him really, thanks for watching, cheers
@RetroSteamTech2 жыл бұрын
You certainly get a variety of jobs to do Matty! Great to see your gantry crane in use, ideal for a job like this. Cheers, Alan.
@MattysWorkshop2 жыл бұрын
Gday Alan, I never know what’s going to happen here, the gantry crane is bloody awesome, wish I’d made this years ago, thanks for watching mate, cheers
@howder19512 жыл бұрын
Nice work Matty, better than new in my opinion. Great to see you helping out a young fellow. Enjoyed the video, cheers mate!
@MattysWorkshop2 жыл бұрын
Gday, Zach is really having a go and it’s great to see, thanks for watching mate, cheers
@trevorjones44632 жыл бұрын
Well done mate 👍 👌
@MattysWorkshop2 жыл бұрын
Thanks very much Trevor, cya soon mate, cheers
@edsmachine932 жыл бұрын
Nice work Matty. It will be like new or better. Take care, Ed.
@MattysWorkshop2 жыл бұрын
Thanks Ed, appreciate you watching and commenting, cheers
@m0xya2 жыл бұрын
Hi Matty, Awesome work as always! I was just thinking. The problem you had boring the other parts. Limited room on the mill. Could you use the lathe as a line borer? I remember Keith Fenner doing something similar a while back. Just a thought..
@MattysWorkshop2 жыл бұрын
Gday, I could of setup a bar in the lathe and line bored the job, I haven’t done this in the lathe yet and haven’t got a boring bar long enough, I told the wife I need a bigger milling machine and so far she has agreed, method in my madness mate, cheers
@bostedtap83992 жыл бұрын
Hi Matty, Up with Kurtis of CEE now!, soft bushes and shafts should last a bit if he's only using it occasionally, what was the material? Yes, I've seen those mini diggers treated like a 30 tonner as you say, especially hire ones. Brilliant job, and great photography 👏. Thanks for sharing.
@MattysWorkshop2 жыл бұрын
Gday, the material was 4140 for both bushes and pins, it’s amazing how much abuse these little excavators will take, thanks very much for watching, cheers
@robertlemoine35002 жыл бұрын
Thankyou sir .
@MattysWorkshop2 жыл бұрын
Thanks for watching and commenting, cheers
@nigelroberson89112 жыл бұрын
Good job. Ive been around excavators for years and pin wear is a big problem, mainly due to lack of grease and jerky operators.😢
@MattysWorkshop2 жыл бұрын
There’s certainly no lack of grease in these pins, plenty of rags were used though out his job, thanks for watching, cheers
@mikegregory4602 жыл бұрын
could always set up a boring bar in the lathe if you have enough between centers
@MattysWorkshop2 жыл бұрын
Gday, I could of done this but I told the wife I need a bigger milling machine 😉, so far so good, thanks for watching, cheers
@bearsrodshop70672 жыл бұрын
Mate, outstanding Pt -1 and even though you mite consider this a simple task, was great you shared, and be looking for Pt-2 of the 2 new lugs and a wrap. Being that today is day 4th day of being hit with the covid freight train, watching was better than all the meds they put me on to get relief (@@)! It's always a learning experience to how you tackle a job . The boring head,,,was that the one you made a few videos Back? Taught from our youth to freeze pressed parts as a trick of the trade, but Kurtis at CCE using liquid nitrogen has always got my interest. Have you experimented with it's uses? Bear
@MattysWorkshop2 жыл бұрын
Gday Bear, I hope your getting over the Covid and your sticker will be in my next video, this is the boring head I made a while back, I need to make a new adjustment screw for it but it has worked flawlessly, it’s been put to the test many times, I’ve never used liquid nitrogen before but it’s great stuff, Thanks for watching and commenting mate and I hope you feel better soon, cheers
@andrewwells13862 жыл бұрын
Love the videos I was always taught to run coolant when parting off as you generate a lot of heat which usually causes the metal to expand and grip the parting tool and may give poor finish to the part
@MattysWorkshop2 жыл бұрын
Gday, this lathe doesn’t have coolant yet and I was to lazy to fill the oil pot, thanks for watching, cheers
@Randysshop2 жыл бұрын
What were the original bushing made of? Or was it just steel on steel? the repair is looking good. Cheers
@MattysWorkshop2 жыл бұрын
Gday, I’m not sure what grade of steel the original bushes were, I don’t this they were to hard looking at the wear they had, Cheers
@MyLilMule2 жыл бұрын
Nice work, Matty. Good of you to try and help out a young man making his way in the world. For the larger piece, could you have set something up in your lathe to line bore it like Max Grant did recently?
@MattysWorkshop2 жыл бұрын
Gday Greg, I did think about line boring on the lathe but I’m not set up to do so, I’ve told the wife I need a bigger milling machine and so I think she’s agreeing, win win mate, Cheers
@MyLilMule2 жыл бұрын
@@MattysWorkshop She's a keeper!
@RalfyCustoms2 жыл бұрын
Bloody ripper mate lol
@MattysWorkshop2 жыл бұрын
Thanks Ralfy, appreciate you watching mate, cheers
@TedRoza2 жыл бұрын
Hi Matty ... Excellet job making the bushes & pins, also showing good fitment. The line boring was very successful & worked like a breeze. Just wondering how you might have faired with a top & bottom cone for alignment.
@MattysWorkshop2 жыл бұрын
Gday Ted, theres a bit of method in my madness here, I’ve told the wife I need a bigger mill to do these jobs 😉, so far things are looking good 👍, cheers
@MegaBCAD2 жыл бұрын
Never done but would think if you welded a thing disk in at the bottom of the hole Center drill in the mill then weld up and bore the disk out could work
@MattysWorkshop2 жыл бұрын
Gday, that’s a great idea, can’t see why it wouldn’t work, thanks for watching, cheers
@p__jay9 ай бұрын
rookie question....how do you calculate the press fit measurements?
@markneedham87262 жыл бұрын
Proprietary Oilless bushes, any good for this....? I mean obviously not, otherwise they would be used, BUT...Why Not....? Nice job, hey.
@MattysWorkshop2 жыл бұрын
I’m not sure how they would go to be honest..
@cj7jeep812 жыл бұрын
Are you using pre-hardened 4140, or annealed? I've had to do this job once or twice, so learning a lot from your video!
@MattysWorkshop2 жыл бұрын
Gday, I used pre hardened 4140 bar stock, I think it’s plenty strong enough for the job, thanks for watching, cheers
@cj7jeep812 жыл бұрын
@@MattysWorkshop Thanks!
@willcullen8415 Жыл бұрын
How did these hold up? All the bushings ive replaced on minis have been hardened, so ive always just purchased the bushing and made a pin out of ground and hardened 4340 in whatever dimension the machine had in it? So am curious as to how it all works out when they arent hard
@MattysWorkshop Жыл бұрын
Gday Will, so far they have held up very well and he’s done a far bit of work around he’s little farm, his not shy with the grease so I don’t think there going to be a problem, thanks for watching, cheers
@jackdawg45792 жыл бұрын
Nice job Matty - Would moving the greasing system to the arm, by drilling thorough the arm so the grease was injected in the centre between the bushes be a viable alternative to the hollow pin?
@MattysWorkshop2 жыл бұрын
Gday, yes that would work well but the grease nipples would probably more vulnerable to getting damaged, cheers
@christophercullen12362 жыл бұрын
Did Trent gets this tool sent to you my Sendle Old apprentice
@MattysWorkshop2 жыл бұрын
Gday, which tool mate
@oil_lord2 жыл бұрын
at about 13 minutes there is a red thing holding your t slot fixtures. where did you get that from?
@berniebourke52252 жыл бұрын
you can buy them as the set and that all comes with that container
@MattysWorkshop2 жыл бұрын
Gday, you can buy these off eBay, just make sure you get the size to suit the tee slots on your machine, thanks for watching, cheers
@araofmadisoncasey42472 жыл бұрын
how did you chill shrink the bushings?
@MattysWorkshop2 жыл бұрын
Gday, I put them in the freezer for quite a few hours, it does work, thanks for watching, cheers
@araofmadisoncasey42472 жыл бұрын
@@MattysWorkshop we have done that and forgot where we place the part and searched the workshop for quite awhile to discover our lapse in memory oooops the other part was placed in a small toaster oven to heat it ... worked out fine
@RB-yq7qv Жыл бұрын
😀😀😀😀😀😀😀😀😀😀
@peterhoffman2597 Жыл бұрын
why not use brass/bronze
@MattysWorkshop Жыл бұрын
Gday, To buy the brass or bronze was out of the budget, the young fella who owns this little digger is 16yo so trying to keep the cost to an absolute minimum, Thanks for watching, Cheers
@KennyEaton6032 жыл бұрын
I wish I had a mini-ex at 16! I wish I had one now at 40!
@MattysWorkshop2 жыл бұрын
Me to mate, how times have changed, cheers
@ronwilken52192 жыл бұрын
Hi Matty, here's the link I was talking about. kzbin.info/www/bejne/fJXCgmydeN6Ig68 It's over an hour long but replaced about four other videos. Interesting device. Ron.
@MattysWorkshop2 жыл бұрын
Gday, I’ve been watching the guy for a long time now and the work he does is absolutely amazing, cheers
@freakyaussy2 жыл бұрын
Onya mate for helpin out a young fella
@MattysWorkshop2 жыл бұрын
Thanks very much, appreciate you watching, cheers
@jdmccorful2 жыл бұрын
"Pass it on", great help to the youngsters that show ambition. Thanks for the look and the sunsets, enjoyed.