Yanmar Tractor No hydraulics. Cheap Repair

[@bennyhill3642]

Hello all. I would like to say. After pulling the hydro screen, if it is covered by something black, that will prob be the hydro piston in your 3 point lift. I'll be pulling mine soon to make sure.. GOD Bless All😇😁😇

[@johnserrano9689]

Need more videos of the legendary yanmar 4300 man... I have the Green version with an 88' Deere 1050 75 loader with the quick attach model 8 backhoe. Absolutely incredible tractors. Big power (for their size) heavy, excellent hydraulics and the yanmars are slightly better than my deere even with deeres "big bore upgrade" with the 7.5 gallon hydraulic pump.

[@DANsaul0413]

Any idea where I can get a replacement filter screen? Everywhere I’ve checked is out of stock. Is there a close equivalent that could work?

[@smallfarminnovations4265]

Try All States ag parts. they bought out Hoye tractor parts who made aftermarket parts for gray market tractors.

[@kurthaueter7653]

I have a 73 Yanmar 1510 with the same problem. I'll try that and get back to you. Any idea where I can get a manual?

[@smallfarminnovations4265]

Kurt your going to have to search the internet for that one.

[@smallfarminnovations4265]

try a jd 850

[@bennyhill3642]

Hoye Tractor sells them. There not the best, but there all that's out there, and tractor forums😇😁😇

[@colbypotts740]

I have a yanmar 3000 with loader where can I find cylinder seals for the loader.

[@smallfarminnovations4265]

Carefully take the cylinders a part. Re move the heads. Gently dig out the U-cup seals and outer dust seals. Look for numbers on the seals and match on the internet. Also try to to get information off the loader. The loader was installed here in the USA not Japan Probably the manufacture will have seals or at least give you numbers. We use Hercules in Florida for our seals. I do not know if the deal with the public they may only deal with dealers. Keep me up dated

[@nate2738]

Got the same problem but after I change filter and oil now hydro don’t work at all

[@smallfarminnovations4265]

nate, Start it up and apply air pressure to the dip stick tube.