How to make hexagon hole in a socket wrenches

This video shows how to make a hexagon hole in a socket wrenches

[@tonylittle2744]

Not sure why it made me smile but all that intricate lathe work and then he bangs a bloody great bolt to make the hex. Brilliant.

[@kalleklp7291]

He, he...same thought here. All that lathe work and then BAM! He bashes a bolt into the damned thing.

[@GEricBromley]

That put a smile on my face. You have my admiration.

[@Yantoo]

Thanks brother ♥️

[@MattysWorkshop]

Gday, the hex looks perfect, it’s good to see a water bore going in, workshop is looking fantastic mate, cheers

[@Yantoo]

Thanks brother Matty's ♥️

[@RalfyCustoms]

G'day Matty, fancy seeing you here mate lol, did this fella move shops? I haven't watched him in a little while

[@MattysWorkshop]

@@RalfyCustoms Gday, Yanto has started his own workshop, he’s going to do alright to mate,

[@tonigugliotta1792]

In pratica tanto lavoro per creare una bussola che e5 doppia e debole

[@jimdrechsel3611]

Before CNC there was skilled labor. I would think the last step would be case hardening. Very creative with the indexing head. Necessity is the mother of invention. Enjoyed it.

[@teddahrable]

There are easier ways to make a socket.

[@tobiaszpasterski481]

Not all needs are respect, authorized and accepted by market/system :). Generally not need create invention, but proffit/gains/profitability :). Global/industrial/imperial monopoly know best which needs accept, finance, recommend :). Some needs are effect of concrete terms and conditions, policy, law :) "NEED" of global industry is use/exploitate/administrate cheap labor and decide about production, control production and all production/trade sectors :)

[@tobiaszpasterski481]

Not all needs are respect, authorized and accepted by market/system :). Generally not need create invention, but proffit/gains/profitability :). Global/industrial/imperial monopoly know best which needs accept, finance, recommend :). Some needs are effect of concrete terms and conditions, policy, law :) "NEED" of global industry is use/exploitate/administrate cheap labor and decide about production, control production and all production/trade sectors :)

[@didierfrassin4507]

Kamu sangat jago, mas Yanto! 👍👏Kamu paham banget sama teknik transformasi logam, dan bisa menguasainya dengan sempurna. Kerjamu tepat dan efisien banget buat bikin alat yang kamu butuhin. Kecepatan dan keahlianmu dalam bikin barang bikin gue ngerasa kagum banget. Gue belajar banyak nonton videomu, makasih ya udah share ilmunya!🤩🙋‍♂😁

[@Yantoo]

Terimakasih kangmas Dadier ♥️😍

[@alexanderandreev7151]

В этом видео прекрасно всё. И то как кернят, а потом сверло уводит от этого отверстия. И термообработка. Заготовка, небось, упрочнена при прокатке. А теперь отпущена, но зато блестит. Главное, что люди хорошие.

[@Yantoo]

Terimakasih saudaraku ♥️

[@frankthieme8724]

Interesting handmade tool - respect.⭐️ Frank 🙋‍♂️ 🇩🇪

[@Yantoo]

Thanks Frank ♥️

[@xabi66666]

Friend, your workshop grows every day, congratulations👍

[@josemacielzamudio1773]

Vamos arriba hermano Messin muy bueno excelente, un Abrazo para ti y todos los hermanos Indoneses, desde Uruguay.

[@Yantoo]

Jose Maciel Zamudio ♥️ 🇺🇾🇺🇾🇺🇾

[@hectorahumada3542]

Como siempre, un trabajo extraordinario más Gracias maestro saludos desde el Sur de Chile

[@Yantoo]

🇨🇱🇨🇱 Hector ❤️

[@antonioruiz6184]

Capo Mekanik🙋🏿, saludos desde Argentina, felicitaciones por el taller nuevo ......👌👍

[@Yantoo]

Thanks brother 🇦🇷🇦🇷🇦🇷

[@replicant357]

Genius!! I love this stuff. So helpful and SIMPLE!!! Thank you 🙏🏻

[@Perbalter]

This guy is brilliant.❤ But I think it would be much cheeper to just buy one.😊

[@RufinoSerrano-r7o]

Estás muy joven y eres un genio Dios te bendiga siempre dándote más sabiduría...desde México

[@Yantoo]

Terimakasih saudaraku ♥️ 🇲🇽🇲🇽

[@gregstewart3690]

This guy is the real thing and i know he could make anything.

[@okorodavid8193]

Am ur fans from Nigeria. Am happy for u, keep it up

[@Yantoo]

Thanks brother Okoro 🇳🇬🇳🇬

[@Monkeyshooter-c1i]

You know what ? You can take the urine outta this idea - feel free BUT we have ALL come across this scenario of a odd or neboff job that needs a one time use (perhaps) socket Well folks HERE is your answer We are all from beginners to advanced “TURNERS” And have varying degrees of skill and imagination This FELLA HAS SHOWN US HOW to overcome a situation Top marks fella & Thank you 👍🏻

[@iuppyoz8950]

Ottimo lavoro, complimenti... Saluti dall'Italia👋

[@drd1924]

This was actually very cool to watch

[@leocirsasso6137]

Os meninos estão construindo um poço. Ótimo trabalho.

[@Yantoo]

Terimakasih saudaraku ♥️

[@СергейТуфанов-с7т]

My friend, in the nineties did the same. It will be a little easier if you make a couple of hexagons ground into a cone. The first pass with an acute angle, the second with an obtuse angle.

[@pintobengkel8112]

Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍💪💪💪

[@kentuckytrapper780]

Excellent job..👍👍👍

[@Yantoo]

Thanks brother Trapper

[@Юрий-ы4п2ц]

До сих пор пользуюсь советскими инструментами , они стоили очень дешиво и было полно

[@deniskramer-buslapp8576]

Sehr schöne Arbeit 😍

[@Yantoo]

Terimakasih Denis ❤️

[@davidiriyanto7598]

wah.. 1 bulan gak mengikuti sudah punya bengkel baru sendiri ya kang... 👍👍👏👏👏

[@Yantoo]

Iya kang.. terimakasih kang David..ini karena dukungan dari jenengan

[@АлександрКопченов-е1н]

Фанатизм - фантазия, грандиозно потресающи. Он без токарного станка на коленке всё зделает

[@nardaoeletronica]

Excellent job.

[@Yantoo]

Thanks brother ❤️

[@TrPrecisionMachining]

very good job brother

[@Yantoo]

Thanks brother Asturias ♥️

[@hectoredelmunozsanchez2885]

años que llevo queriendonver este video muchas gracias

[@lordmarius9305]

brutal mis felicitaciones . saludos desde sudamerika

[@andrzejporeda7281]

Przepięknia jest ta zrobiona robota przepiękny jest ten cały pomysł z tą nasadką pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍

[@姬山]

车床不是可以直接打六角孔吗？

[@vladimirujang]

Mantap udah punya alat sndiri good lah bang semoga makin sukses

[@adriankohli4870]

Top-Job,Sir 👌

[@Yantoo]

Thanks brother Adrian ♥️

[@imtiazhussain7815]

Very nicely done 🇵🇰🇵🇰

[@pabsdacutan]

Wow very nice idea good job

[@ricardomarcos821]

Meus sinceros comprimentos a os mecânicos torneiros grandes profissionais excelentes trabalhos,

[@takayukinakayama3351]

私はアルミホイールのセンターキャップを廻す工具が必要になった時に自分でソケットを作りました。2面巾６７ｍｍだったかな？私はフライス盤で作ったのですが、この動画の”熱”と”叩き込み”の方が簡単に出来そうですね。ただ私の場合、叩き込むものがアルミ製の美粧品でしたのでこの方法は無理だったと思いますが。

[@martinswiney2192]

Looks like some nice rain starting up.

[@tutorialkehidupan311]

Mas mau nanya itu ukuran lobang sama as nya sama ya mas?

[@kevinklei3005]

As an Australian retired toolmaker good job done . However guys wear decent footwear and beware of lathes I witnessed a guy having his left arm torn off from his shoulder plus his left ear ripped off . Just be very cautious they are unforgiving and under estimated as killer machines .

[@Kenan_KARA]

Do you live in Australia now?

[@kevinklei3005]

@@Kenan_KARA Yes I do just be careful using powerful machines GOOD LUCK and be alert . Cheers

[@Kenan_KARA]

@@kevinklei3005 Thank you.Greetings from Antalia

[@davidkim4083]

There's a gory video on the Internet of a Russian guy killed by a lathe. His coat sleeve got caught and his whole body got pulled in and shredded. Absolutely gruesome.

[@kalleklp7291]

@@davidkim4083 I saw the video...horrible death for the poor guy. It reminded me of an incident years ago in school. A guy had a scarf around his neck while operating a lathe. He knew better and everyone was clearly instructed about the safety and what NOT to do. Anyway, the damned thing got caught in the spindle while it very fortunately ran low RPM. The guy next to the idiot was aware of the situation and immediately hammered the emergency stop. The idiot returned to school after a few days off with a very clear strangulation mark around his neck. It was a while before he got near a lathe again and he was more than lucky nothing bad happened to him. Machinery in a pro workshop can kill careless operators!

[@marymichinelm.8656]

Lo felicito por su ingenio y destresa

[@АндрейКлименко-м1й]

хороший кузнец без всякой токарки делает на раз.

[@gurumesin-channel]

Sangat bermanfaat. Terimakasih.

[@arf_rf]

Hola Mesi..m, estas perforando un pozo para extraer agua para la casa?, como vas a extraer el agua?, con un molino de viento?

[@Yantoo]

Saya menggunakan mesin pak

[@arf_rf]

@@Yantoo Anda menggunakan pompa air submersible tipe pena

[@J.Enrique]

Sin ninguna explicación le resta valor al trabajo

[@андрейигнатенко-н9н]

Сразу видно что не русские ! Такой замудренный метод , сверлить шесть отверстий .... Столько "выёживаться ! Просто просверлил на 2 миллиметра отверсие больше чем нужный шестигранник и также нагрел и пробил шестигранником .А для плотности обстукал по окружности деталь на шестиграннике и всё .....! Вам никогда не победить нас Русских !

[@محمدسليم-س7ط]

الف مبروك على الورشه الجديده الله معك

[@Yantoo]

Aamiin.. Alhamdulillah ♥️

[@jepriono4885]

Ud lama ga mmpir. Skrg ud punga mesin sndiri ya mas.

[@Arnold302]

How many hours?

[@МихаилТанин-и1и]

Отличная идея!

[@驰原]

7:48 That's really smart👍

[@kashi2843]

did the same in the 80's only for non standard bolts - but nobody does like this anymore in the 21st century its not accurate neither has the hardness or strength to withstand high torque, its is costlier less accurate and more time spent.

[@edwinhernandez9532]

Muchas gracias por este video

[@ernestozentenosuarez8970]

Faltó forjarlo al final en aceite para que quedara con mucha dureza de lo contrario si se deja así se va a deformar o romper muy rápido

[@mshahzad8019]

Nice jnb from Pakistan

[@Yantoo]

Thanks brother Shahzad

[@АнатолийСветлый-т6ы]

молодцы нормально делают ,но можно и не заморачиваться просто просверлить одно отверстие в центре нагреть на горне и забить шестигранник с начало конусный потом прямой ,когда то мы так наборы делали во времена дефицита.

[@Юрий-ы4п2ц]

Как-то не припомню про дефицит инструментов особенно при совдепии, я досих пор пользуюсь теми запасами, взял как-то набор метчиков , и плашек всех размеров штук 150 качество не Китай работает досих пор

[@андрейигнатенко-н9н]

Мы так и делали . Только ещё отбивали по окружности на шестиграннике ,что б плотней и чётче было.

[@sarvinozshokirova2755]

Very good my friend😉👍

[@JonDingle]

Fascinating stuff, I always wanted to see how SnapOn Tools were made.

[@MarcoTrillion]

Great work

[@josefjindra4706]

Je dobré že na světě jsou řemeslníci co umí.

[@arzyfauzy9670]

Bengkel baru mas...punya sendiri ??

[@Yantoo]

Iya mas Fauzy

[@arzyfauzy9670]

Wah sukses...semoga makin rame...

[@Yantoo]

Aamiin mas. Terimakasih support dan doanya mas

[@Armanufacturingskills]

Nice work

[@Yantoo]

Thanks brother ♥️ AR

[@kalleklp7291]

Well, the first 6 minutes was exactly what I needed to make a revolver barrel. Thanks a lot.. :) No, just kidding...

[@MagnetOnlyMotors]

1:20 pretty scary welding 😢😂🫣

[@stewartfrye]

Good video, also drilling a well, alright

[@Yantoo]

Thanks brother Stewart ❤️

[@johnwurst6691]

That's why my socket set is so expensive!

[@rafaelchaves5804]

Más bien pregunta, como hacen el huevo cuadrado

[@coal_tactical]

no they use a rotary broach for that this is only when you have no access to one

[@rekstok]

Good job.

[@davidschwartz5127]

Nice!

[@louistyrrell4876]

I love this

[@sidneyferreira8914]

Melhor do que a ferramenta original ! 👍

[@Yantoo]

Sidney Ferreira ❤️

[@louisd1968]

your a genius

[@endurofan9854]

now that's a perfect fit for the bolt 😂

[@andribasyrah9341]

Lokasi dimn sih bang...???🙏

[@anggiaucustom8482]

Untuk bahan stainless bisa pake cara yang sama mas ?

[@v.volynskiy]

Это конечно не Пакистан, трёхкулачковый патрон заготовку центрирует. И делительная головка какая-никакая - в Пакистане бы мелом шестиугольник разметили. Но есть же оправка в заднюю бабку для прошивки внутренних шестигранников.

[@นพพรวิเศษมงคลชัย]

I get new idea .....thank you..

[@-st1cr]

سلام علیک . همکار عزیز . میشه بجای اینکه بعد از تراش داخل جای شش گوش بکس تا یه اندازه که تراش زدی بقیه را با مته فرز انگشتی داخل را شش گوشه کرد . البته شما استاد ما هستید

[@Yantoo]

Terimakasih saudaraku ❤️ ♥️

[@isaneterrier6678]

Bonsoir, très ingénieux !!!

[@Zaradny_Bercik]

Excellent!! :)

[@cdrive5757]

Hey Yanto, are you guys sinking a well? Wakodahatchee Chris

[@Yantoo]

we made a well by drilling a hole in the ground at a depth of 29 meters brother Chris

[@cdrive5757]

@@Yantoo I thought I recognized that. Thanks!

[@gerypurnomo7631]

pindah lokasi ngendi mas, sue ra dolan ketandan

[@abdulsait2037]

Alamat bengkel bubutnya di mana pak ..

[@ipools8969]

maseeeh sampeyan bengkele nang purworejo opo magelang niki? aku pengin bubut as seng lubang kotak 8mm...bubut daerahku ga pada iso

[@Yantoo]

Purworejo mas

[@Пятры38]

Раньше эти вещи делали в кузницах и быстрее и проще и деталь прогревалась как надо и получалось отлично , а здесь возни много , а результат тот же...

[@ТакисПроестакис]

зачем по сто раз менять сверло? можно же делать по операциям?

[@bobjimenez4464]

Take good care of your lathe and she will take good care of you.....Very Well Done!!! : ) I can imagine hearing the complaints from a group of spoiled tool makers assigned to make that socket using your tools and techniques.

[@Yantoo]

Thanks brother Jimenez ❤️

[@supartianatiana978]

Mau pesan bikin kunci atau spesial tool mas.

[@phihungtran1391]

làm chơi thôi , chứ làm để bán thì ngày làm được mấy cái ?

[@hamid-b3m]

Pesen Deep Socket 8mm, 10mm yg kaya KTC bisa gan

[@enriquehernandez8741]

Te falta golpe cuando haces el Hexágono y una vez terminado,lo tendrías que Templar al Tubo en Aceite y Kerosene.tendria que ser un hierro del 1045,ese queda joya cuando lo templas 🤗

[@tournagemanuel1k]

جميل اللهم يسر 👍🦾

[@Yantoo]

Aamiin ❤️

[@Julio82489]

Para q lo agujero?

[@masilul6409]

Karyamu mendunia bro. Yang coment kebanyakan orang luar negeri . Hebatt. Ada nomor tlp/WA BOS

[@haroldoaprendendoatornear6488]

Você é mestre meu amigo, Anda adalah tuan teman saya

[@Yantoo]

Terimakasih Horaldo ❤️

[@treeguyable]

Pretty sure , the cost of electricity, and oxy/ acetelyne used, was more than what a nice, new impact socket costs.But.. gotta have fun.

[@georgeh9967]

does not look like he is in a position to walk to the corner hardware store

[@AttilaAsztalos]

@@georgeh9967 You severely underestimate the availability of tools (possibly tenth-hand used, but nonetheless there to be had) even in low-tech looking places. Ca Lem has a good video on this - you just shop at the tool flea market instead of a hardware store, and you buy what you can find, not necessarily what you came for. But make no mistake, in a place where a socket wrench truly is unobtanium, there are no functioning lathes.

[@georgeh9967]

@@AttilaAsztalos not in a position to walk to the corner hardware store.means. he is far from store /town. maybe rural. it is a saying. and in no way has or means anything about the tools he may have. he did use a lathe and various tools. and in fact has more than i have.

[@foxnet9064]

Parah hebatnya.. 👍👍👍

[@احمدحسن-ض1ب]

سلمت يداك

[@vladimirsemenov9650]

Если есть токарный станок, за это время что он потратил на эту головку, можно выточить деталь за которую заплатят столько, что можно купить набор головок.