Wow, thank you so much, sir! I’ve been scouring the web looking for this exact solution for this same mower, and kept finding videos for the wrong models. Very helpful video!
@waynepirihi97694 жыл бұрын
Yes finally found my model on KZbin. You don't even have to remove the main drive pulley just the belt guard bolts (2 either side of chassis )...so easy
@charlesowenssr44297 жыл бұрын
THANK YOU I HAVE THIS MOWER AND I NEEDED TO PUT THIS DRIVE BELT ON AND COULD NOT FIGURE OUT HOW UNTIL NOW WOW YOU SAVE ME!
@samulinousiainen86214 жыл бұрын
IThink that belt should go around that tension pulley ?? From right to left side ann then around main pulley?
@bobberguy13 жыл бұрын
Old video but new info I used today. Thank you for saving me time and aggravation.
@LB-zt6tx3 жыл бұрын
Thanks man. Saved me a lot of time and headache!👍
@rickyrando30342 жыл бұрын
Hello my name is BigRick how do you adjust the clutch on your mower i push the Pedal down and the motor still moves
@jordonjones8259 Жыл бұрын
Year make and model? I have the exact same one & cannot find the deck belt for it
@lcmmassa85712 жыл бұрын
Aaron, Thanks I didnt kmiw I had a rear belt probkem till I watched this. Im trying to put a mower deck belt on a MTD # 13AU694H401 model. Do I have to take the deck off? Do I have to remove shared rear pully as well?😆
@michaelpatton36734 жыл бұрын
Thank you this is my exact model. and only after I went through more work than I needed. once together though that free tensioner pulley or something is not keeping the belt tight enough to engage it to drive.
@KerryArmstrong-y1p9 ай бұрын
I've got the same problem with the new belt not being tight enough, did you ever figure this out?
@AJ-tz6qu6 жыл бұрын
I have a Western Auto wizard which is the same as your mower. Different battery box though. Are you sure you put the belt on the right way?
@philliphall5198 Жыл бұрын
Some of the 38 decks use shorter deck belt than book calls for
@damirzajecoho1 Жыл бұрын
Thanks for the tip🎉
@tyronjarrett5842 Жыл бұрын
Thank you. Very helpful cheers.
@stus33933 жыл бұрын
quick question, I have a left over part that dropped out of nowhere....it's a white plastic or nylon bushing less than an inch in length and about a half inch in diameter, it has a flange on one end... i think it dropped out of the space where i removed the 9/16 nut and washers to drop the pulley assy so i could install the new belt....which was very helpful and thanks for this video:) I got the belt in and reassembled, started the mower put it in gear and nothing happened...the front drive belt is intact but its not spinning the pulley...any suggestions anyone?
@grantw.whitwam99487 жыл бұрын
I have a 1993, 12.5/42in and the idler set up is different than yours.
@claytoncameron28516 жыл бұрын
What size is the belt can't find the numbers. Thanks
@waynepirihi97694 жыл бұрын
This looks the same as mine ...the belt you require is MTD 954-0281-Trans belt MTD 954-0281-Drive belt MTD 954-0329A -Deck belt I've just replaced all mine today and had the same problems looking up and finding different models till now
@waynepirihi97694 жыл бұрын
The best thing also is that you don't have to remove the main drive pulley just undo the 4 bolts that hold the guard on that surrounds the belts
@JaniHuhtaniemi2 жыл бұрын
At this video variator belt seems to go wrong way, as one guy earlier told. I have model: 13AA478F678 and the parts catalog offers too long belt, L=112mm long, my model is working with L=1040mm belt, and also the beltpattern is correct, you can check pattern it from mtd's website.
@rphoto20015 ай бұрын
Your recording skills need to be improved. Wanted to check on the belt diagram but your recording skills don't allow it.