Turning a Free Pallet into a $1,200 Desk

I made this $1,200 desk from a free pallet that I found on Facebook Marketplace!
Support this channel:
PATREON: / morleykert
STL FILES: morleykert.com/shop
MERCH: morleykert.myspreadshop.com
THINGS I USED IN THIS VIDEO:
DEWALT 10-Inch Table Saw: amzn.to/3IJPjfQ
VEVOR Thickness planer: amzn.to/3w5qMgd
FastCap Lefty Righty Tape Measure: amzn.to/3PAA1ws
Milwaukee Random Orbit Sander: amzn.to/3OucSuQ
RYOBI Cordless Circular Saw: amzn.to/3RF2u5Q
RYOBI 4Ah High Performance Batteries: amzn.to/3uQ58Mv
Alumilite Amazing Clear Cast Epoxy Resin: amzn.to/3osBQ33
Makita Compact Router: amzn.to/3bO9oFB
RYOBI Impact Driver + Drill/Driver Combo Kit: amzn.to/3OcBRTO
Total Boat Halcyon Marine Varnish: (Get 5% off all TotalBoat products with this link): www.totalboat.com/morleykert
Steel table legs: amzn.to/3Qk0fDT
OTHER TOOLS I LIKE TO USE:
www.amazon.com/shop/morleykert
Note: The above shopping links are affiliate links, meaning that, at no additional cost to you, I may earn a commission if you click through and make a purchase.
MUSIC (in order of appearance):
On Call - Jones Meadow
Bruiser - Bonkers Beat Club
12th Floor Party - Jules Gaia
The Cast - Wendy Marcini
Oh So Hot - Jules Gaia
A Much Needed Vacation - Matt Large
Beast Coast - Amber Spill
Earn It - Heyson
Down to Seconds - Trevor Kowalski
I'm a Dynamite - Harvio
Get Real - V.V. Campos
Wow Factor - Daniel Fridell
Inner Light - Duckmaw
Biggest Guy in Division Five - Bonkers Beat Club
Love Bomb - Sarah, the Illstrumentalist
You can see more of my work and behind-the-scenes content on:
INSTAGRAM: / morleykert
TWITTER: / morleykert
TIKTOK: vm.tiktok.com/xSfbdj/
I'm also on these podcasts!
Into the Spotlight: anchor.fm/into-the-spotlight
CLAMP: www.clampcast.com/
morleykert.com/
#woodworking #DIY #palletfurniture

[@MorleyKert]

By popular demand, here are all the songs I used in this video (in order of appearance): On Call - Jones Meadow Bruiser - Bonkers Beat Club 12th Floor Party - Jules Gaia The Cast - Wendy Marcini Oh So Hot - Jules Gaia A Much Needed Vacation - Matt Large Beast Coast - Amber Spill Earn It - Heyson Down to Seconds - Trevor Kowalski I'm a Dynamite - Harvio Get Real - V.V. Campos Wow Factor - Daniel Fridell Inner Light - Duckmaw Biggest Guy in Division Five - Bonkers Beat Club Love Bomb - Sarah, the Illstrumentalist

[@nuggetella]

Nice work, I have a nice stash of second timbers myself and am eager on putting them to good use...

[@grahambyrne8714]

Did you factor in fuel in car to pick up pallet running cost of your power tools and how much money you have clawed back from the initial spend of your power tools to do these jobs.

[@beverlycook8679]

Beautiful! You did great with recycled materials too! You are great for our Earth!😊❤️ Thank you!

[@chrisbrucesr.9256]

What kind of planer is that man?

[@shamanfryd]

Favorite part of the video. "That must be McKenzie" "Definitely not a woman" She came with you to protect your chastity. lol Cute interaction

[@humbertsmith8864]

I turned a 2300.00 desk into a palate once. I used a crowbar and I still have some community service hours to complete.

[@missyounorm33]

Funny guy. You write for guys that watch pallets videos and that’s ok

[@humbertsmith8864]

@@missyounorm33 ?

[@gr0undrush]

😅😅😅😅😅

[@tomd.7325]

I laughed so hard at this comment!😂😂😂😂

[@humbertsmith8864]

@@hak1985org thx!

[@michaelmaas5544]

I’m far more impressed by the fact you got $1200 for it than the build itself.

[@supertickle]

it's a video of him grifting an individual

[@deathcal29]

This... who ever paid 1200 for that has more money then he knows what to do with it...

[@TheMediaMachine]

You market to people who is wealthy enough to think $1200 is small change. I bet he would have paid even more.

[@michaelmaas5544]

@@TheMediaMachine or to dumb to know any better 🤷🏼‍♂️

[@larrya.boyd.6784]

1 born every minute

[@funksoulbrother3620]

1200 dollars!! You saw him coming. I wouldn't have paid more than 50. Your selling skills are immense.

[@rossbartel6865]

Your just another Walmart baby

[@heidekathrine4433]

It's really wonderful to come across people who freely share valuable information online. You never know what kind of knowledge you might stumble upon that could have a lasting impact on your life.

[@arnaulfeike1474]

Don't procrastinate when it comes to saving and investing. Don't wait for the perfect timing; start now because the current moment is the best time to invest.

[@user-qk3ov7ng6g]

What specific type of investment are you referring to? I'm aware that making money through investing is not as straightforward as it may appear.

[@arnaulfeike1474]

Cryptocurrency trading appears to be quite lucrative. Despite the constantly changing nature of Bitcoin, it's evident that the cryptocurrency community is here to stay. John Joseph, you're doing an excellent job.

[@daviniafelipe4412]

I apologize for interrupting, but I have been searching for assistance with this type of trading as my work consumes most of my time, leaving me with limited opportunities to focus on trading. How can I get to know him?

[@arnaulfeike1474]

INSTAGRAM

[@HeliRy]

It’s a nice table for sure. But I’m more impressed that you found someone willing to hand over $1200 for it lol. I guess there really is “one” born every minute 😂

[@chase86903]

I mean, the man was obviously extremely wealthy so he probably didn’t care that much. Still absurd to think about that tho

[@Notorious_viP]

😂😂😂

[@Lifecomesfromwithin]

@@chase86903 wealthy people spend all their time making money and keeping their hands clean and end up being rather skillless and embarrassed, so they will pay for knowledgeable creativity and construction

[@Lifecomesfromwithin]

There were many labor hours that went into it as well though

[@Jason-TheChad-Muska_circa1995]

@@Lifecomesfromwithin Not $1,200 worth. Yes I know because I've been doing carpentry since the age of about seven or eight, so almost 30 years now. I cut down my own trees and process my own wood from the 300ish acres set I have that was passed down from my family to me and then I make all sorts of tables, chairs, desks, cabinets, jewelry & boxes. You name it, I make it and I wouldn't ever in a million years charge somebody $1,200 for this even if I could find somebody that is dumb enough to pay that much. I have a moral foundation in which I don't take advantage of people. This guy doesn't.

[@TheScandoman]

Making the desk is pretty easy; making a nice one, quickly DOES take some skill and expertise; HOWEVER, the REALLY amazing part of this is finding someone willing to pay $1200 dollars for it!

[@alexayache8556]

Yeah seriously 🤣

[@yazoo69]

in my city this desk will sell for 120$ xD max

[@SighsInternally]

sucker born every day

[@TheVIKINGSALLTHEWAY]

No shot that guy payed 1200😂😭😭😭

[@RylanStorm]

He knows the guy and he's getting his pic in a KZbin video. He's essentially paying for vanity. Chuck it on eBay, without referencing the KZbin video and without linking KZbin videos to the auction, and see what the offers are. Id wager nobody puts in an offer higher than $200

[@TaylerMade]

as a furniture maker all i can say is "people no longer understand what quality is" you found a sucker when you sold it for that.

[@Quiselott]

Lol really did. Not to take away from his work...

[@johnkirby5013]

Those legs, and 20 minutes to attach them. Very cheap and hokey.

[@papaspipe6167]

He should have made place matt's out of his own faeces and sold them with the table for an extra 100 bucks👌

[@jvsings9146]

Hater’s

[@papaspipe6167]

@@jvsings9146 if you can't handle the heat stay outta the kitchen kid🔥

[@geraldmcpherson2769]

This one seriously needs a laugh emoji and not a thumbs up or down. Congrats on getting $1200 out of it, absolutely insane you did.

[@RAZORGEKOMAN]

@@MavensechoIt took him 12 hours to build. It’s not like it took him weeks to build.

[@bgj2940]

This is the cheapest looking $1200 table I've ever seen.

[@outlawdingo3020]

🤣🤣

[@granudisimo]

Someone was willing to pay that for it, and apparently, that's what really counts, not some objectively calculated added value. Keep supporting our current, hegemonic economic system, and this shit will never end.

[@alexsmith5274]

you’re not only paying for the table you also pay to have an entire video made about the construction of your table

[@granudisimo]

@@alexsmith5274 Thanks for agreeing with my premise while at the same time, correcting me on the specifics. Yes, that's added value through the additional labor of recording the whole thing under high production standards, including post production editing and whatnot. It's added labor value, there's no way around it, in fact, his addition of labor value with the video, has made me post comments, which in turn makes the algorithm work and make for the channel to reach further.

[@beibei93]

This comment is what made me decided to sub to the channel. The sheer diss 🤣🤣🤣🤣.

[@Farmboy1544]

The hardest part about this build was finding someone to pay out $1200 for that desk.

[@hopefully2224]

I'm a designer I buy desks at wholesale prices (my cost) that are more money, not as nice. It's a beautiful piece. Also his time as a carpenter is worth a lot. It's a skill.

[@hopefully2224]

Why are you so rotten Farmboy? You come across as jealous. Just stop.

[@tiagofigueira4525]

I thought I was the only one. Yikes

[@ipleedafif8033]

Most if not all desks don't come with an edited video of how it was made.

[@Farmboy1544]

@@hopefully2224 I have that skill, and I make stuff, day in, day out seven days a week. That's the reason why I can say I would not pay more than $400 for that piece. Yes the quality is there but thats it. It's just a table top. He bought the legs so...you are saying the table top is worth $1000. Hmmmmm maybe you are in a different market than I am. Perhaps that's the answer.

[@ReclaimDesign]

$1200! Mackenzie is a customer you want to keep 😅 Well done Morley - earning that from a pallet is no mean feat.

[@ML-sc3pt]

It's not hard to scam people

[@ReclaimDesign]

@@ML-sc3pt ?

[@krisbright3227]

@@ReclaimDesign This dude scammed Mackenzie. Straight up. Way overpriced for a desk that doesn't have anything remotely different than what would count as a dining room table or coffee table. There are $800 dining tables that have a built-in Leaf that has intricate gears, hand-laid inlay, and very tight tolerances. The work this Morley did was maybe worth $400 tops and that is only because of how much time he put into it.

[@WillWilliams-vo4nk]

@@krisbright3227 A scam is when you lie or trick someone into doing something. Did he lie or trick her? Or did she just believe his work was worth more than you believe it was?

[@jiggnorth3593]

​@@WillWilliams-vo4nkHe lied by saying that it was worth over a thousand dollars.

[@texan2560]

Here's a pro tip for you. Use wire snips to extract nails with no head on them. And staples and stuff. Squeeze hard enough to grab the nail but not too hard to cut the nail. It will work much better than pliers.

[@rubenverster250]

I usually just use another nail from the other side to whack it out ':) Been working pretty well so far :D

[@emostorm7]

Pallet made specially for him for this video lol

[@joegreenbbka]

$1200 😳 I have a nice oversized custom cherry wood desk that I had a carpenter build me and it only cost $750. It has 4 drawers, enclosed on 3 sides, and the tabletop is 4'×3'. I guess things really are worth whatever someone is willing to pay.

[@whoabro615]

Yeah he could also say he sold it for whatever he wants he doesn't prove the price he got shows text messages that I could easily get someone to fake.... all for a few views that's where he's trying to make money he surely didn't really make that much off that table people are gullible

[@tastyham]

cad ? usd ? yeah still expensive, but it looks like they're in canada and its like 30% difference in currency

[@hopefully2224]

He under valued himself and you got a deal. Be grateful instead of bashing craftsman online.

[@joegreenbbka]

@@hopefully2224 He's been a carpenter for 30 years, he knows the value of things and himself. He doesn't rip people off, that's for sure.

[@chelsea9686]

Blacktail Studios couldnt get $1200 for that, and he's massively in demand.

[@rektfreak]

I am still shocked that someone would pay $1200 for a small desk or any desk for that matter. Nice build though.

[@scottii]

@Tee Hee That and "reclaimed wood". If you see "reclaimed wood", there's heavy mark-up. =S

[@Thowe]

I would pay no more than $150 for that

[@RoninNYC]

$130 ON AMAZON BABYYYYY

[@vinhix]

its just because he is a youtuber, otherwise no one would pay that much for it, it doesn't even look that great, I mean its not bad, but not remotely close to what you can buy with 1200$...

[@RoninNYC]

@@glub1381 well you really have to understand the time and effort into creating this. The Hand crafted desk this man has created I guarantee is far more sturdy & rugged compared to any Ikea or other brands out there.

[@jhdk356]

Actually quite happy you show how long it takes - I always underestimate my wood work projects, by a lot, and I don't really have a frame of reference 😅

[@dtrain1024]

As a person who has never built anything other than legos and model cars growing up, this video (in which I stumbled upon), was so amazing for someone like myself that wants to start building this spring/summer - building a couple of toy chest for my little ones. Awesome video!

[@NatalieHarrisonLim]

It’s scary knowing that when walking around Toronto, there may be people I walk past who are financially stable enough to buy a 1.2k desk

[@joeciok]

Dude I just spent $2k on a used toolbox in BC and I got a pretty stellar deal. Now if I wanted build my own work table, and that's build it my self. That's like $5k and I'm not counting my own labour. But on the other hand my $2k toolbox is a lot more functional than that bullshit joke of a pallet table.

[@MatthewEverhart]

Not only spent $1200....but spent $1200 on a $1000 asking price! :D

[@jeffjarvie7223]

I throw away skids like these daily lmao

[@308AlYsSa0034]

@Garnet Holman you're absolutely right! I've lived in Toronto all my life and you can walk down your neighboring street and your neighbor could be a coke head living in utter filth or they could be someone just moving in to the newly renovated line of town houses that are all 100%identical on a street across from a line of tiny dinky houses that look like tool sheds beside these 3 story mansions. Its Toronto; idk why they seemed surprised theres rich and poor living amongst eachother lol!

[@siclilalbert]

I'd rather fork that out for something natural then get one of these ikea saw dust products for $300. You could also DIY fo-fwee!

[@joshmouth]

This looks amazing and he put a lot of excellent work into it. But is it really worth $1200? I would think no more than $300

[@sappersilver7762]

Well the type of wood, grain of wood, and it being handmade really helps the value. And as he said, he agreed on $1000 for the desk so it was really only a $1000 desk. It wouldn’t be worth as low as $300 just because of the wood and it being handmade.

[@Akixkisu]

Ofcourse, you are buying a story.

[@BrianHAviation]

@@sappersilver7762 I've got a super nice L-shaped desk that an modern industrial look. I paid $1750 for it. I listed it for sale on craigslist for $350. It was in perfect condition like new. I couldn't even get $200 for it.

[@MatthewHall78]

someone with a factory mass producing this exact table could cut the build time down 3 hours and sell the table for $300, and then when people come to your house they will say, “oh nice table I saw that at Costco”.

[@sappersilver7762]

@@BrianHAviation your mistake for paying that much then. I don’t know anything about the table that you described, but you didn’t mention the type of wood, or whether it was handmade or not. Just because something looks good doesn’t mean it’s worth a lot. (Not saying that something that looks bad can be worth a lot though)

[@Dan-xx5jq]

I guess it like folk paying a million dollars for a drop of paint on a canvas. It is a work of art! One of a kind! In a hundred years they will use this video to value it on the Antiques Roadshow.

[@lucybryant5370]

This is my first time seeing your video, I really enjoyed watching you create that beautiful desk, I create different styles of center pieces and gifts. I was thinking about not making them anymore. But seeing you making the desk really inspired me to keep on creating center pieces and gifts, thank you for inspiring me to keep going and not give up. Thank you 😊

[@johnbagewll2321]

Never, ever give up! ~Winston Churchill

[@gordjohn2322]

@Lucy Bryant Lucy, why don't you make and post a video of your handiwork? I for one, would LOVE to see what and how you make those center pieces and other gifts. Please think about my suggestion.

[@ML-sc3pt]

The table top was nice, those legs were God awful though. Should have made some nice wooden legs but that takes real skill not just a planer

[@MrTravisAl]

@@gordjohn2322agreed! I’m her first subscriber now! Either way, I appreciate this comment. It’s super wholesome.

[@Balckdo]

I died when the foot hit the wall and fell off! I've done this. It's an easy fix, but in front of the client is so embarrassing. Beautiful build Morley Kert, subbed!

[@Notesens]

Yeah i cringed so hard. We all know it's a simple fix but breaking something as it's being delivered is literally what nightmares are made of

[@deficator750]

Especially a client who paid $1.2k for a free pallet

[@ronc4762]

Okay desk, but no way worth $1200. This looks like a total setup!

[@ILoveManCity.]

Im pretty sure his buyers are fans of the channel and appreciate his content, you can see the guy who bought this one give extra money and they talked about his past videos projects.

[@aidanjudd4214]

It's hard wood desk. That's eco friendly, and carbon negative. Those factors alone can make a buyer value the product more

[@wokenessaplague5387]

It is,there a market for youtubers or ticktokers to find random people for their videos and acting

[@markblankenship5788]

Agreed. No way in hell would I have paid that for that desk. More power to ya. PT Barnum was correct.

[@triumphiztation]

No, That's inflation..

[@itscriispy]

a lot of people are talking about 1200 being too much for this desk and I do agree, but I also want to mention that this is in Canadian dollars, $1200 CAD = roughly $915 USD. just keep that in mind. Edit: also the guy added the 200 extra, so the price morley listed is closer to $750 USD. which in my opinion is quite worth it for a custom desk.

[@LILSATOO]

yeah if the custom desk didnt look like fresh shit

[@MrManAmong]

I knew I wasn’t gonna be onboard when I saw the pallet being picked up in a hatchback. And yes, that is a VERY generous customer. $1200 for a small broken desk that doesn’t even have a drawer. I appreciate the effort but… what a world lol

[@bradjenkins3146]

My friend worked at a plant that got material from overseas. The skids that arrived were made of teak wood. He quietly gathered skids for awhile and eventually disassembled them and made teak floors for he and his fathers' boats. (skids are another name for shipping pallets).

[@usarebel420]

Very cool!

[@Lord_Bibulous]

Nice.

[@oneoflokis]

Neat! But what are skids?

[@dm3619]

@@oneoflokis pallets like the one the guy used in the video, just another word for pallet

[@BlackSeranna]

That’s awesome!

[@user-lb4qb6mk4p]

I wish I could find clients with as deep pockets as yours lol. People around me would offer $20-50 and maybe a case of beer (And I don't even drink lol)

[@Legendary-zh9hd]

I know I wouldn't spend 50bucks let alone 1200 on that it looks like shit. Specifically, the mustard-colored W M shaped legs.

[@nickm4974]

Basically if you don't have a following this is an 80 table Max...

[@seblo8462]

@@nickm4974 yea nowadays people get away with gluing a bunch of pieces of wood and epoxy it all together and want thousands lol...back in the day office furniture carpentry was an art and the materials used were specifically picked out and shaped from a single piece maybe 2...lol yea

[@Elle_Gowing]

I think the title was a typo and he meant $120, not $1,200.

[@FirstBornConservative]

@@Elle_Gowing nah he's counting the ad revenue

[@dianadeluca8500]

I think all that work and being completly honest on prices and work it worth paying the price. The table is very beautiful and solid. LOOOOVE IT!!! Well done!!

[@shanefowler3504]

Awesome work repurposing a old pallet. Marine varnish will last a lot longer but it off gasses a lot more because of high voc content. This is a great option I would probably choose it myself but if someone has allergies I would go with an Oil Modified waterborne like a bona finish and a satin or tongue oil hand rubbed or if you want to go European wood oil Woca makes some great products

[@MommyCthulhu]

No way it sold for 1200, im a woodworker myself and I fully realise some projects just arent worth it because the time invested isn’t corresponding with the ultimate value.. that would be a 275-350 dollar desk tops

[@OscarOliu]

If you're a good woodworker then you devalue yourself. Your time is what is being paid for, not the product.

[@siggie8610]

not even

[@joelburke8757]

@@OscarOliu bro this is novice level craftsmanship. Kids in shop class do more intricate work. Not worth even the 1000$ price tag.

[@drewgrows7765]

First thing I thought after he spent 8hrs taking apart a pallet was why not save time by purchasing new wood and turn out twice as many finished products.

[@drewgrows7765]

@@joelburke8757 I suspect the whole sales thing was a act. If this guy could turn these profits wouldn't he be driving around a new truck to move his products. This one job alone would cover the monthly payment.

[@AntiViGames]

I'm glad you listened to the comments and picked up a bunch of tips and tricks and started using push sticks! Good job!

[@christ9359]

The ability to take constructive criticism is a good indicator for success. This KZbin channel will do just fine.

[@AntiViGames]

@@christ9359 I agree, his techniques looked a lot better in this video compared to his other pallet video and I believe he'll continue to grow.

[@edmundtablet]

Omg the last pallet video I was like :0 his fingies

[@dclinks]

Unbelievable. A guy pays 200 extra for a table. The builder tells the buyer he thought he was a girl, but they had to have spoken before the deal was made. Come on! I watched it, but I’m doubting many things.

[@AntiViGames]

@@dclinks That has absolutely nothing to do with my comment...

[@roganmitchell1633]

Not what it’s meant for but I’m using pallet wood to build cabinets and counter tops for my bus and this helped a lot gave me a lot of insight on how to get it looking great

[@curtlsu3483]

That was really cool how you built that table, I think it was overpriced but get more power to you. Excellent

[@YouTuballer]

My man out here turning garbage into $1200 glossy garbage, well played

[@johni4591]

Fax

[@andyvogts4630]

Bruh literally that desk is ugly af

[@cookiemonster208]

This comment made me LOL. But still, go do something with your own shitty life instead of tearing down other people. Ask me how I know your life is shitty.

[@DanLimbach]

@@andyvogts4630 C'mon man. It's nice. I would love to find people who would pay $1,200 for a desk like this. Makes me wonder what I could get for my 8-footx30-inch butcher block desk. I used gunstock stain and 8 coats of poly.

[@C.Hawkshaw]

Hey, at least it’s not veneer over pressboard.

[@liamx6636]

$1200?! I've been in the furniture industry for a decade. There's no way the value of that desk is $1200... unless you find a sucker.

[@traviswilson7332]

Right? All he did was cut it down, sand/varnish, and buy legs off Amazon that were made in Taiwan. How that added up to 1200$ is beyond me

[@zeusdarkgod7727]

There's a sucker born every day, the real trick is spotting them.

[@zebmaxwell7979]

its that internet clout. its not just a desk, its a desk other people on the internet wanted, but "you go it". From a modernly famous people on the internet.

[@aliveandwell3958]

It’s not just about the cost of materials; it took him 12hrs of labor. He only charged $1,000 for it. The customer basically tipped him $200. You can set your hourly rate at whatever you want when you work for yourself. I’m guessing his hourly rate is $60. $60 x 12hrs = $780 Plus $170 for materials = $950 And probably a $50 delivery and installation fee. Makes sense to me.

[@barenjager9678]

@@aliveandwell3958 it works out mathematically but he simply ripped him off... if I bought a plain stainless steel kitchen knife from amazon for £20 then took 12 hours to put my maker's mark on it, give it a new handle, re temper it and resharpen it, no one is buying that knife for 1,200 because at the end of the day it was a £20 knife, at the absoloute max you could get £100 regardless of the fact I put 12 hours into it

[@BottomsupOrganics]

I see all the “knothead” respondents claiming the desk isn’t worth the price McKenzie voluntarily paid for it. What McKenzie paid for worked out like this: $200 for materials, $1,000 for the carpenter’s experience of knowing “how” to do something, and more importantly, “why” it mattered. You can only sand a knot so long before you must give up removing the knothead. You can’t fix stupid. Beautiful work, great video, inspiring to say the least. Keep up the fantastic thinking.

[@alexreid4131]

Duuuuude!!! Been following the woodworking community for ages. I have a woodworking business myself. Most channels follow the same boring progression: “I have three tools and you can do this if I can do it” --> “Here’s some builds that sell” -> “Wow guys amazing that you like my stuff” -> “I quit…my job ha ha gotcha” -> “so I have this free CNC machine” …then they just become what they always were and no one can relate. But this is a breath of fresh air! Keep doing you brother.

[@ryan2376]

I usually turn pallets into camp fire wood, but this is a much more interesting option. Looks amazing!

[@ur_cowboy]

a lot of pallets are treated with chemicals be careful to not breathe in the fumes.

[@MusharnaMush]

Is it 1.2k worth though? Id pay like 110 max

[@iknowobamaslastname8131]

@@MusharnaMush he probably means like making it himself

[@1crzflyer]

i think we found a guy who'll pay you 1200 for a campfire..

[@mattbailey1015]

I used to do this too! But I stopped, because pallet wood is usually treated with chemicals that are notttt good to inhale as smoke. It's not an immediate effect, but over time it might bring health issues. Take care man, and sculpt a beautiful desk!

[@sergeihanush2262]

From floor refinishing experience: don’t over apply finish. 2 coats of gloss and 1 coat of satin is the best. More coats - higher chance of cracking.

[@jessiejanson1528]

sounds like it didnt dry enough before you added more coats.

[@thesicilian4464]

Dude great for helping him out. good advice. I won't add much more. just want to let him and everyone else know more thin coats are way better than thick coats. Use your mind it will make sense. Woodfloor guys are the best.

[@OArchivesX]

@@thesicilian4464 lmao wood floor contractors are usually ripoffs that don't even do great jobs, and take advantage of ignorant people who don't have an eye for detail. You have to search far and wide for a reasonably priced guy to haggle down that doesn't leave bad spots on the floor. Scam artists

[@TheScandoman]

Thanks for the tip, man! I barely have the patience for 3 coats to begin with, so, now I have justification!

[@TheScandoman]

@@jessiejanson1528 Yeah, never too sure about that, either: I got impatient with some Rustoleum enamel spray paint on my bathroom's laundry chute flapper door & frame; there was some rust due to scratches; I did some good sanding work, and feathered it out pretty well, and first coat looked SUPER nice, but then, I noticed an area that didn't get fully coated; but I got impatient, and tried to 2nd coat it too soon, and it ~dissolved the first coat: it got all 'pruney', and started peeling off...so, had to clean off all the soft/loose stuff, let it 'cure' for a couple more days before I could sand it again, and then repaint... It looks like a real amateur job (which, of course, it IS...), but I have a lot more work to do on that bathroom's walls, plumbing, so, maybe I'll go back at it, again, later. At least there will be much less rusting until then: I prepped & painted inside & outside.

[@pedropereira5125]

Your energy is why I subscribed. Everything else was just a bonus. Great content

[@laneetherington614]

I use vice grips to get the short nails out, but some of them break anyway. Watching your work really gave me some ideas of how to better use the pallets I have collected.

[@pianoman551000]

What surprised me was how weathered and worn-looking the pallet looked. There was a store that gave me free brand new pallets for the asking that were stacked up behind the store.. Took the pallets and made shelving for my garage. I used a similar process that Morley used, but took half the time. $1200 was too much for a simple desk. He basically charged for the manhours involved, but the desk wasn't unique in design.

[@nickadkins7765]

It was $1000 if you watched the whole video. Guy gave him a $200 tip. $85/hour with materials and delivery included for a one off handmade piece seems pretty decent honestly.....

[@rlolo777]

@@nickadkins7765 yeah around here contractors charge $130 an hour just for their labor. Apprentices charge $85. It's insane.

[@ClassicCase]

@@nickadkins7765 yes, but for a higher level of skill. This is woodworking 101 skill.

[@nickadkins7765]

@@ClassicCase you aren't grasping the big picture here. The guy that bought it probably has no woodworking skill OR tools. Can't have one without the other. Tools are expensive and woodworking takes time to learn. He is paying for a custom piece. The laborer is supplying his skill, time, tools, gas etc....the client is supplying a "yes i like that idea" and the agreed money to back it up. That's how a capitalistic system works. If people think someone is charging too much well they don't get paid and the business shuts down, or they make necessary changes to offer things at a more affordable price point.....regardless handmade and bespoke ANYTHING will demand a premium, not just woodworking. Hope that helps

[@victorsolis4838]

I been to a shop that there work is high skills and I do believe that kind of table would be in that price

[@lorrorstory]

I love that you’re time stamping everything. As someone who struggles with adult ADD, time management is one of the most difficult things to overcome when trying to learn a new skill. Every other creator except for some of AlmFabs videos does not really say how long they spend doing something, which is a bit misleading for someone about to try the same thing. Great video

[@lntkernow]

THIS 🙌🤙

[@shxp6547]

So your add literally means you pass on ALL things that require a time frame of large scales? im trying to understand how thats not just lazy, instead of actually ADD... fellow ADD person asking... because the option of redirection is a thing

[@Bozwald]

Adult ADD huh? Grow up.

[@sporks3256]

@@Bozwald you don't grow out of ADHD/ADD. It's literally a different wiring in your brain. Thats like telling autistic people to stop being autistic, because FYI ADHD/ADD is a neurodevelopmental condition, just like autism is. ADHD is behaviours and traits that are the result of a person's brain developing differently during the key stages of development before they were born or as a very young child. How about you just go change the literal function on your brain, big guy! Go back to school and take a science class.

[@multi_arm]

@@Bozwald lol no

[@robertvassallo1776]

In order to crack apart pellets, I place a scissor car lift jack between the planks and insert a small piece of flat metal bar between the narrow side of the jack and the plank. This keeps the plank from splitting. The planks will unfold as you turn the jack. After that, you can either cut or remove the nails.

[@johnbagewll2321]

I’m a 35 year tradesman/ craftsman and I’m thrilled to see a young man with ingenuity. The more you read and do the more skilled you will become. Disregard all the nay sayers here please.

[@mlo527]

I like Freudian slip of calling it what it is - a table. Congrats on getting $1200 for this thing. That is shocking lol

[@joshharley5397]

I'd be so embarrassed if I paid 1200 for a former pallet desk 😂

[@Micahshot]

exactly

[@iggunnafandom7432]

Buyer was obviously rich and had deep pockets.

[@Seanc74]

I’d be more embarrassed to have the cheek to say cough cough weer weeeeer won thou tho thouuuuuusand

[@crypticallife4284]

You guys are sad people. Furniture is way more expensive than your basement dwelling gets allowance from mommy pockets could ever imagine

[@joshharley5397]

@@crypticallife4284 I found the pallet desk purchaser

[@hailimizarstory]

It's great when you meet a customer who not only likes the work of wood but also appreciates the craftsman's work. And that makes it worth $1200 in their eyes.

[@cesarperez4827]

Loved the video, the idea, the effort; but I recommend putting things together onsite (1. It will fit better on your car, 2. Better chances of not hitting the walls.) Keep up the the great work! I learned a lot from your video.

[@drummerdks]

I think there’s certainly a bit of luck that comes into finding someone who is a fan of your work already and that same person sending an extra $200. You do amazing work! I’m glad it’s being recognized and that you’ve been building a demand for your brand

[@whoabro615]

Don't be so gullible if you have ever built and sold furniture it doesn't sell for those prices unless you have fine quality wood like black walnut tiger maple ect i can have anyone send me a text saying they are paying this much and act like it all so I can get views on a a bunch of lies bc most people are extremely gullible when they don't know the furniture business I worked for duralee fine furniture and bernhardt in NC I'd know also why pay 1200 for a table when you can find anyone that builds furniture to do it for you for half the price Noone just overpays by that much unless it's a lie simply for KZbin content which will make him money off the views

[@twintyara6330]

He did posted on "His" Instagram, so the only type of people that would buy that thing would be his fans

[@kuza3991]

Repent and follow Jesus my friend! Repenting doesn't mean confessing your sins to others, but to stop doing them altogether. Belief in Messiah alone is not enough to get you into heaven - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36). Contemplate how the Roman empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years to accomplish the religion of the Israelites C) History as we know it is fake. You don't really need to speculate though because you can start a relationship with God and have proof. Call on the name of Jesus and pray for Him to intervene in your life. - Revelation 3:20 Revelation has been unfolding since Jesus died. The Popes have claimed to be equal to God and set themselves in Jesus' place (antichrist(s)). Vatican City (Which is its own nation BTW) have risen up to fulfill the role of the false prophet Regarding the man of lawlessness or antichrist, 2 Thessalonians 2:4 says “Who opposes and exalts himself above all that is called God, or that is worshipped; so that he as God sits in the temple of God, showing himself that he is God.” The restrainer that the Apostle Paul was referring to in 2 Thessalonians was the Western Roman Emperor, who held back the Popes from taking power. Once the last Western Roman Emperor was removed from power in 476 AD, the Pope was given civil and ecclesiastic authority over Rome; healing the deadly head wound of the beast in Revelation 13, as they took the Emperors title of Pontifex Maximus, leader of the church and state. “We may according to the fullness of our power, dispose of the law and dispense above the law. Those whom the Pope of Rome doth separate, it is not a man that separates them but God. For the Pope holdeth place on earth, not simply of a man but of the true God.” (Source: “Decretals of Gregory IX,” Book 1, chapter 3.) Pope Pius V blasphemed, “The Pope and God are the same, so he has all power in Heaven and earth.” (Source: Pope Pius V, quoted in Barclay, Cities Petrus Bertanous Chapter XXVII: 218.) Pope Leo XIII declared, “We hold upon this earth the place of God Almighty.” (Source: Pope Leo XIII Encyclical Letter, June 20, 1894) The antichrist sea beast of Revelation points to the office of the papacy, the Popes of Rome, who controlled the Roman beast for 1,260 years, from 538-1798 AD. Daniel 7:25 says “And he shall speak great words against the most High, and shall wear out the saints of the most High, and think to change times and laws: and they shall be given into his hand until a time and times and the dividing of time.” The Popes of Rome spoke against Elohim and proclaimed to be God. They reigned for 1,260 years, from 538-1798 AD. during which they caused tens of millions of saints to be killed. The Pope’s title is Vicar of Christ, which in Latin is ‘Vicarius Filii Dei’, and equates numerically to the number 666

[@ocrickard2]

Beautiful work! On cutting through the nail though - I have a story to tell. My father used to build a lot of furniture with reclaimed lumber. He’d put an ad in the paper as a “demolition man”, and offer to take down old barns, fences, etc. for free if he could keep the wood. When I was about 5 years old, he reached a similar point to where you got with one stubborn nail. He decided to persevere, and cut through on his little Makita table saw. He put on his goggles, pushed the board forward, and the nail dislodged itself, and shot straight back at him, puncturing his glasses and his skull at the temple. He proceeded to walk into the house, dazed, and my Mom freaked out. We got him to the ER, and the neurosurgeon there told him he was lucky to be alive. He told him that the only thing the surgeon could do was pull out the nail, and pray that nothing went wrong. He yanked out the nail with some pliers, and my father survived it, though he never recovered his sight properly in that eye. Having seen this, I do not run boards with nails through any table saw. It’s simply not worth it.

[@jamesp13152]

Wow! Glad your dad was o.k. I have run some re-claimed boards through the table saw by mistake with pieces of nails I didn't see. Heard a chunk fly out at warp speed, thank goodness...

[@bootitwill]

thank you for the story! very sorry for your dads incident but the story will help many others stay safe! much appreciated for effort you took to post.

[@imissnepal]

Love your content , love your enthusiasm and love of your craft. All the haters are just jealous. I’ve been working with pallets for a few years but you’ve definitely inspired me to get back at it. Keep creating and keep that smile my brother!

[@thelorddrinian]

showing this again this year to my High School "business and marketing" class. love the desk, but also how you talk through the steps as both woodworking and from a business perspective. I'd love to ask a follow up question for teaching purposes if you happen to see this comment......

[@MorleyKert]

That’s so cool to hear! Ask away.

[@thelorddrinian]

@@MorleyKert awesome! I wasn't sure if you'd see this, not to mention reply. I was trying to get them to think a little more deeply about the business aspects. I asked "what kind of business does he have and how does morley make money based on what we saw in the video today?" Obviously they all said "a product business, selling a desk" but... I wanted them to realize that we also saw ads, and with like 3 ad breaks in a video with 6m views you made some $ from youtube, also you had 24 patrons at the time and made some money from that (thanks to your mom!) AND the epoxy company sent you the product for free and you had a link, possibly affiliate link, which would have been another source of income. KZbin is essentially a service business as opposed to a product business since you're providing entertainment. .... does that all check out? I told the class that I have no idea what youtube revenue is for you (cpm?) but it's possible that you made more money on the video/patreon/sponsership than you made on the table .... you don't have to go into detail, but is that a fair guess?

[@thecyberyak]

I recently redid an old dresser and was super happy with the results of it. This inspired me to try out to make some kind of furniture with a pallet thank you!

[@TheWRCop23]

Coming from someone in the woodworking industry, I give you kudos for using something that you admittedly don't have much experience in and turning it not only into a profit for the table but also with your KZbin fans. 12 hours for this size desk is Ludacris in reality, but doing it as a side hustle for yourself is definitely impressive.

[@euroshfl]

don’t know if I’d use epoxy or dust/glue mix . Big time loss . Also as far as I’m concerned there’s no need for a planer in this case , or machine edge beveling . ‘’popping the grain” procedure made me laugh . Hey , but $1200 ? good for him

[@scotsman6712]

Shout out to Ludacris

[@zkart8038]

Ludicrous. Cracks me up when people spell it Ludacris not knowing the artist probably played on the word

[@moonwolf9782]

I don't think it really matters what other people think! Have any of the people here posting negative comments actually worked with wood before? I don't have any carpentry skills, I am a techy. But, I have worked with wood before in various places, and both my father and brother are craftsmen who have built all kinds of things. The guy didn't edit out his mistakes; instead, he showed how to work around them. It was more time-consuming, but he wanted to make something for the buyer he already had. Once you put that together, knots and all. What you actually find is a solid piece of wood that you can connect with. Remember the guy he sold it to was more interested in eco-living. If he had hit the wooden part of the table into that wall, I think it would have been a different story. I doubt anybody would really care much about the legs of the table. If there is a problem, he can just reprint and add the pieces again; he said that to the buyer. Some people get really excited about something like this. It isn't perfect, but the idea that it was once a pallet would be amazing as something has been repurposed. I doubt you would be able to do this with pallets in England, or even Chep, as they are all softwood. You got lucky finding pallets that had hardwood.

[@kellarkenderson9875]

I always wanted to learn how to work and craft this type of jobs, now not only I can see how to, but with music and great process. Dude awesome and creative job fr ❤🎉🎉

[@african_ghosty4541]

Ive actually done this before. When i was 6-7 during my school holiday i went to a carpenter’s house that my dad knew and throughout that holiday i worked on that desk and im still using it to this day. The table top of the desk is make from a recycled pallet

[@Constrictor200]

I really appreciate the sincere honesty throughout. It makes the video special. So many other channels chooses to not say or show, what you say and show, especially in regards to money and time used.

[@glorialegault6696]

This is a original plus the hard work and wood you can't find today I paid in 1997 just under 100.00 for a round with modern large leg in middle of table order especially for our family still in style strong and beautiful not thin like other breakfast or could be a dinning table. Give this your man credit for his time and original piece and the price.

[@kenmason1926]

Beautiful job. I love your craftsmanship!

[@hunttoo3480]

I wouldn't call this a craftsmanship 🤣🤣🤣🤣

[@OSRS_KQs]

I got the high rated pallet buster with tilting feet from amazon for $53 and I gotta say... pallet boards are almost always spared from cracking and the teardown process went from like 30 minutes to 3 minutes. Seriously worth a try. Also, be sure to metal detect pallet wood after you de-nail because often times those nails were strung together with metal wire which stays imbedded in the pallet wood and can damage your blades. love the pallet videos. Subbed.

[@paulkelly2140]

That's a good reason to tun Diablo steel blades in all your saws. If you don't hit any steel they last a long time.

[@OSRS_KQs]

@@Str8Spi3 lu?

[@karenkrohn8003]

+1 on the value of a metal detector for that work

[@corneliusva]

I like that you're so happy with what you're doing there. In a world with all this stuff going on that's not so good it's good to see some happiness

[@carlaclemons9678]

I have to say, you did a great job on this. The amount of work & construction design is worth every penny. I’ve seen particle board furniture sell for more. This being all solid wood and labor combined, worth it.

[@urischwartz6711]

I made a planter and a few other items from used building wood and pallets. I'm not a carpenter, just a guy with a saw and a hammer. Where I'm from you can pick up a used EPal for about $10-15, or find plenty lying around. Sure, it won't be a burlwood/mahogany fancy table, but it looks very good because of your finish work and the recycling bit is important too. After all, so much usable stuff is just thrown away.

[@zeuszl1566]

Imagine spending 1200 on a table just for the guy who made it breaks the leg in your own place and then just says "its an easy plastic piece" hell nah. was a scam from the start.

[@coffeepot3123]

The seller and "buyer" here are in kahoots, it's staged for publicity, goddamn i hate hippies.

[@Souc._]

lmao “scammer” no, the people who buy it are just stupid 💀 y’all hating on a man cuz he made $1200 off a free pallet like you wouldn’t do the same. Pocket watching crazy

[@ttoyscustoms]

@@deetsitmeisterjd not a scammer, you just don’t like the price. Stop making the definition of scamming lose meaning by misusing it.

[@ISmellLikeBacon]

@@deetsitmeisterjd Thats literally just business. Dude wanted a custom desk and got one

[@saad.485]

Your honesty 😂😂😂

[@deezipp3011]

tip: you need to understand the moisture of the wood. store the raw wood indoors; where it will end up, for weeks or more before working it and keep it indoors during the whole project. get a moisture probe and measure. Reason is that as it dries it will warp and you don't want that. if it is at the moisture level of the environment it will live in while working it will warp less.

[@daddywoofdawg]

That pallet wood is kiln dried and heat treated it will never absorb moisture again.

[@A2ZGeek]

@@daddywoofdawg yet everything he makes is warped!

[@ryanwinchester6644]

Bro it’s a pallet lol it would have been kiln dried and mass milled by teenagers who don’t give a fuck on not much over minimum, then whacked together by a slightly more senior person who also doesn’t care, then had bags of wet mulch on it from what the video said since 2019, where it’s probably spent it’s life between a cold warehouse or outside through the seasons. I think it’s well and truly past keeping indoors for a 2 weeks lol how it is now is how it will be until the world ends my man unless it sinks on a ship

[@chuckaule6292]

this happened to me with some cured/chemically treated wood from home depot, i used my welder skills and clamped one hell of a reverse twist in it, soaked it, then hit it with a heat gun. to my suprise it was actually straight the next day.

[@smcewen7]

Yeah pallet wood has been exposed to numerous climates,and that's usually not a problem.👍

[@jeremyoshea7941]

This is a great channel. Thank you for posting videos. I really enjoy them. I should say this one. I haven’t watch the other ones yet but look forward to it. Have you thought about possibly adding a GFI or replacing an outlet with a GFI that way if you blow it you can reset it right there at the outlet you probably know about that anyway but thanks for your time.

[@KaliBlaz]

if you have a nail that breaks into the wood and you can't get it off, get a plug cutting bit and cut a plug where the nail is stuck, the nail will come off with the plug, then simply plug the hole back with a dowel from a scrap piece. also when you use pallet wood for projects, get yourself a pin pointing metal detector and scan your wood for Embedded nails before you cut them on a table saw, planer or jointer, trust me it is worth it.

[@Taylormade2350]

I wouldn't even pay 300 for that lmao. I better get an entire oak corner desk for 1200

[@brandon500]

New Yorkers

[@brandonspaulding8097]

The cost of living there must be very very high.

[@JohnWaclawski]

Did anyone else grimace when he knocked the leg into the wall? I saw it coming too. :( Other then that....seriously, seriously impressed!! I was not expecting that pallet wood to come out looking as good as it did. You did an outstanding job with the tools available to you. That tells me you don't need thousands and thousands of dollars to make a beautiful piece from free pallet wood. You earned a new subscriber. I look forward to more like this. Keep up the great work!

[@jasongabson8611]

Next time put a blanket in your car to protect. Don't leave home without !

[@SlickRickTPB]

carrying it like a beta will do that

[@melindamosbey8257]

Me too!

[@robertfergusson5367]

I cringed when he A) Didn't finish sand it along the grain with a sanding block to remove the swirls that orbitals leave, B) When he smacked the packs of varnish mix on the sanded surface which would leave scratches, C) Smacked the finished table down on an solid table top that could have had something on it that would mar the finish.

[@RJ42997]

I thought dude should have been helping him carry it; then boom leg hit and knocked off

[@Bobcharliegultiano]

Thanks bro for thos knowledge. Dream to DIY someday once have all the tools.

[@debrazawlocki3975]

Your joy while creating this piece is evident! Great craftsmanship resulted in a beautiful desk. Thankfully, your buyer appreciated your skill. Christ chose the same trade when incarnate. Be blessed!

[@scotth5503]

Wow that time tracking is great. I wish every youtuber did that. I like to take a paint scraper to the excess glue seepage when it's slightly dry but before fully curing - much easier than sanding it all off.

[@justcraziii]

Fellow woodworker here, I like using painters tape to surround a gap/crack. Makes for less sanding and less low points when trying sand away little glue blobs. Running a chisel gently down a glue line is super satisfying as well. Hope you didn't get sick when epoxy coating the table in your apartment. It's toxic my guy.

[@darlinebrooker843]

He was in his garage the entire time .. not in his home

[@sourceofuniversallove1449]

Darline, did you watch the video?

[@True_Blood_89]

​@@darlinebrooker843 No he wasn't, you need to actually watch the video

[@karenkrohn8003]

@@darlinebrooker843 He specifically made it a point to apply the epoxy indoors to avoid embedding any dust from the garage in the finish.

[@mellag]

Awesome, you made and sold STORY not a desk. I love it!

[@dr.skipkazarian5556]

"Desk: a piece of furniture with a flat or sloped surface and typically with drawers, at which one can read, write, or do other work." This comment is just my curiosity regarding craftsmanship, integrity, and value....basically, this is a cutting board with damaged legs, glued together in the hope that it will not expand, contract, or otherwise lose its strength integrity and its being valued at (including the labor) $1,200 (Canadian) or about $935 (USD). Hannibal may have crossed the Alps, but I can't get over this.

[@killeralltires]

Yeah this didn't look like a high end woodworking deserving of the price at all. I guess Things are worth what people will pay for them. But a desk without storage is a.... Table. Plus it was damaged upon delivery. I'd certainly not have sent extra on top for that. And in the end to me it still looks like ratty butcher block wood with some fake gold legs. I see it as being worth less than the time and value put into it. Beauty is in the eye of the beholder I suppose.

[@Azaduur]

I look over at the $99 Husky wood top 40'' tall work table and see an angle iron steel frame, a 1'' thick block of engineered wood coated in lacquer...and it feels good knowing I got a $900 table for $99 >.>

[@jokaah7337]

@@Azaduur And that’s before it goes on sale 🏷

[@jokaah7337]

@@killeralltires Those legs look a little suspect to support chopping up meat 🔪 🥩

[@indecisive2690]

Bruh for real this is piddling me of there’s literally like no craftsman ship in this he could of played around with the layout of the wood before who glued it use some nice joints but nah ya grandma could do this in less time

[@freestyleskyline]

I'm actually really impressed that this was not clickbait. You legitimately took a pallet made it look beautiful and then turned it into something usable. Granted definitely not something anybody can do without all those extra expensive tools that you have but that being said it's fantastic to see the level of skill that you have and making something old and dirty look that great

[@jeffneads171]

Nice! In case you were wondering the wood you’re working with is hickory. Also i’m not sure that you check the moisture content of the word before assembling it. When you picked it up from the person you bought it off of she said there was I believe fertilizer on it? Most likely a bunch of moisture has been soaked into the wood and can lead to issues over time shrinkage. There are many pin meters that you can get. Also, your wood moisture wants to be around 5 to 8% moisture Contant for any sort of furniture, or in my case, flooring. Hope this helps your business.

[@rishipatel7216]

I made the same table for 160. Got a butcher block counter from Home Depot, used Rubio monocoat (superior finish imo), and put some legs on it. I made my gf a standing desk one by attaching adjustable standing desk legs from Amazon to it. Much less work, beautiful finish. But I understand the point was to recycle a pallet and make it into a usable item.

[@exodave8169]

I think your channel size is perfect for me. Big enough to really do some cool stuff, but small enough where us common mortals can still interact with you directly. Keep this up man!

[@gamadmex]

The table looks great! It is amazing how much great wood ends up in pallets.

[@BryanTok]

This is literally the definition of "one man's trash is another man's treasure."

[@onetimearound1275]

Cool video! I didn’t realize pallets could have hard wood- nice to know! :) Your pallet build turned out great! :)

[@GrizzV991]

I love the work, I love the ingenuity, I love the attention to detail. That is not a $1200 desk. at the end of the day its gussied up pallet wood with boat finish and amazon legs.

[@brujachingona2175]

It's a $1200 desk if that's what the client pays for it.

[@OArchivesX]

Good for him that he found Mckenzie willing to scam himself and pay extra for it! Lol. Tons of great desks online, much bigger too with higher tech, for $400 or less

[@GrizzV991]

@@brujachingona2175 wow that's a really epic own to tell yourself.

[@leolego2]

@@GrizzV991 it's the truth though.

[@leolego2]

then build it and sell it for 1200. You think it's easy? He got paid 80/h, not anything absurd, and that's not even considering the price of the tools and space he uses.

[@boltonky]

Must say very impressed with the table from that pallet and the breakdown of cost, its impressive what people can make with some knowledge and the ability to sell/market stuff (I personally don't have any luck in that department, yet i know people that i could give a table etc too that ive had up for months and be gone in a week doing nothing different lol) Also cost breakdown is where it can then get complicated because if your running it as a business there is other overheads you have to factor into the cost power,equipment, insurance etc and if its a hobby/side hustle ever country and state has different laws retaining to how much you can earn without paying tax on income and also the sale of goods. Keep at it, you seem like a genuine person so good luck with your adventure :)

[@anthonyvera8524]

Hey Morley....good work, my man. At first, I was skeptical. But I am thoroughly impressed with your precision, your attitude, and your cost breakdown. Don't let the haters on this comment section get to you. They don't define who you are. Keep it up!

[@rickybungalow8839]

you ran into pretty much every problem a person can when dealing with pallet wood which makes this a good guide

[@ajjones64]

I work in a receiving department and I am always moving pallets around. This is so cool watching you recycle and repurpose pallets that would have otherwise been forgotten or used up til it was thrown away.

[@Xover112]

why would you throw away wood if you can use it for heating?

[@borissukoi564]

smart companies never just throw pallets away...

[@kinhason46]

@@Xover112 Issues with having a fireplace or local regs, but always good to find a home somewhere...

[@kinhason46]

@@borissukoi564 yes, always we'd recycle shipping our goods to our customers!

[@grizzlyaddams3606]

@@Xover112 stupid new epa approved wood stoves are ruined by burning pallets. As they're treated with chemicals that destroy the catalytic converters in them.

[@sdhpu]

I think people like the fact your taking something ordinary and making it extraordinary! Nice work and hope you continue to have great success!

[@MikeMarina140]

👆👆✍️ ʟᴇᴛ'ꜱ ᴛᴀʟᴋ ▶️ For Pröfïtãble Ïnvëstmënt ...

[@jacobgillespie4758]

While I disagree with some of your processes in the beginning, well done. I thoroughly enjoyed the content and you've definitely earned my sub. Keep it up.

[@williamedwards7881]

Loved the video format, the table really does look amazing 😊

[@michaelquillen2679]

Good video. First few coats in gloss and the final coat(s) in satin are right on for almost all satin type finishes. I do this with my guitar finishes. Thanks for the video!

[@angryKitt3ns]

If you get a pallet where all you really want to salvage is the planks (more common with skids) you can use a reciprocating saw with a thin "demo" blade between the planks and beams and cut the nails; removing the wood you want very quickly. If you use a cordless version you can do it on site where you find the pallet and make the entire pallet take up less room in your vehicle. I punch the nails out from the cut side, with a springloaded center punch usually just one or two taps knock them out.

[@donavanmcelroy6263]

YES! The the absolute best way to do it. I used to struggle with a flat bar and hammer trying to break them down, then, I saw someone doing it the how you mentioned and was blown away. Such a time saver!

[@denverflatpackjedithornton]

This may be one of the best comments I've read all year and I'll definitely come back and let you know if I utilise it in the next couple of months as I'm thinking of going into the reclaim world

[@xxxxMaddnesSxxxx]

This is the best/easiest way if you won't be using the center beams, just the planks. But if you do want to use the center beams, you'll want to use a different method, else you'll have to be very careful with any cutting or planing of them. This guy has a good vid on easy ways to do it. kzbin.info/www/bejne/oIC7p6V-mrh_sNU

[@angryKitt3ns]

@@denverflatpackjedithornton Also, there are the rare pallets with screws instead of nails, get yourself a cordless impact driver and a cordless reciprocating saw and you can blast those pallets apart in minutes, also in my experience comes in handy if you want to say reclaim wood from a furniture piece someone has thrown away you can just take the pieces you want (ie a dining tabletop can be a great source for fairly decent hardwoods)

[@josephacker3328]

A pair of end cutters does a great job of pulling stubborn nails. Controlled pressure on the cutter grabs the nail really well, and the curved jaw rolls around to make a smooth pull.

[@aleksmihaleva]

Great work! The video is so lovely and the desk is amazing!

[@achildofthelight4725]

When you start to think that time is a pleasure rather than an expence you have just created something pleasurable that someone gave you a return that both can be happy with 🤗

[@timmyvincent625]

You did a great job! I loved seeing the cheaper tools being used to create a really great product. Everyone has to start somewhere and it can be daunting if someone uses $10,000 of tools every time they make a video.

[@DiegoRodriguez-cs1ow]

Great work I liked the video didn’t expect to watch it full through but glad I did awesome stuff hurt to see you break the little foothold at the bottom but it did give it some character, Blessings!

[@laupetre]

Stopped mid viewing to say that I love the fact that you started using push sticks :) Looking forward to see the end product :) PS: Really love your channel, so glad I discovered it!