YerfDog gets a 420cc predator engine

[@fan1701]

Yes, yes, and yes! Everything a Yerfdog needs in one video. Perfect. I've been looking for a yerfdog 420 conversion and frontend upgrade video like this for a while. Super quality video as well. 👍👍

[@TyranisCustoms]

You should check out our 420 & dual arm conversion on the same yerf dog. I love these 3203s!

[@coreyhorning9872]

Great video! My favorite part was you two guys just enjoying yourselves at the end

[@LAFisch01]

Thanks for sharing this video and the build. I've seen a few other swapped yerf dogs, but not much on how others have done it. Looks like my son and I have some work to do.

[@curtpyro1518]

I love this, awesome video. I do have a question, how can I tighten up my brake on my yerf dog? thanks your video was very helpful

[@gregsilva1472]

Awesome video thank you so much sir thank you for teaching me how to reuse my cable

[@bigloads3600]

The intro of you losing control of a go-kart tells me everything I need to know lmao....

[@offhandacoustic]

150$ ebay shocks for the front and rear completely changed the ride quality on my yerf dog. I can fly through my field now and the shocks just soak it up. Highly recommend some upgraded shocks, you wont regret it.

[@AdamKimball-jb9gn]

Dude that thing rips keep up the good work 👏

[@IssacLopez-b5v]

I got to know, where did you find a torque converter like that

[@Jl3l23W3l2]

Nice work dude.

[@lizzard7473]

Lol I'm putting a 440cc duromax on a yerfdog now. Except I've pulled the governor while adding that upgrade. Hat's off to you for using gopowersports.com. I recognize their products. I use them too.

[@rcfs835]

What size of borders on the back of the go-kart

[@monkeydude3987]

Nice upgrade here! I'm trying to get this model of Yerf Dog myself, though not sure when I'd put a bigger motor in it.

[@carterb31]

We have a spider box with a predator 420 and a very very good torque converter and a lift bout to get some mud tires it’s not fast but it’s made for off roads and rocks because I live in nc so it’s hilly

[@iceyisaac665]

I'm getting a yerfdog in 3 days I was wondering if a predator 212cc engine with a stage one kit would do well with it

[@aaronjones5372]

Most definitely..do a torque converter instead of centrifugal clutch tho. Mines completely stock and hauls my 200lb self around..

[@iceyisaac665]

@@aaronjones5372 okay i will

[@209farmz]

Just picked me up a 3203 yerfdog 🔥 bouta do a full restoration

[@savagestaysaucy]

What size socket do you use on the back tires

[@Kartastrophic]

I cant remember. It was a while ago.

[@T_gaming28]

Do you think a predator 459cc would fit?

[@jamesbryant7355]

Hello hope all is well have you ever done a gear box with reverse on a 40 series torque converter.

[@Kartastrophic]

No sorry. I almost did on a 212 kart but never did.

[@marvicty]

Dude was rippin down the parkway at the end of the vid

[@cqgranite]

Awesome work bro

[@RastaBTv]

Got another one up an screaming down the highway. Wicked. Blessings my brother Rastafari

[@u4eeahh676]

Wow, that's got some Zip nice build

[@Smokeslingerowner]

Maybe heat shrink would work also vs tape ?

[@Smokeslingerowner]

Or solder

[@madmoe3657]

Im looking to do the same build, i would like to pick up a 40 series torque converter which brand torque converter did you go with?

[@mrhighpower5632]

Looking good bro.Im in the process of swapping a gx390 in my kids yerf dog

[@moyeet7]

what wire did you use to extend the electric start? I want to do this to my go kart

[@noeltalamantes9701]

Where can I get that whole clutch plate set up lookin to do the same swap

[@lizzard7473]

40 series torque converter

[@coryblain4917]

Hey man, what altitude are you at and what jet size did you put in the carb? I tried taking my go kart up to an area where it was 6000 altitude and the engine kept dying.

[@michaelglenn1730]

Good work my man…

[@prcc8793]

Where can i get the stage kit..and wish one works on a 420 predator?thanks

[@edgarruiz7441]

Great Video man, what size or teeth is your sprocket?

[@Kartastrophic]

I'm not sure sorry. I sold that kart long ago..lol

[@russellcatron3185]

Is that a Blast led torque converter? I think mine has the spring wound the wrong way

[@rf4215]

Great job on the video! Question, I inherited a different model yerf dog with a 420 predator installed. the torque converter is facing inward toward the motor. Is this ever acceptable or should it be facing out?. Just learning.. Also, when we pull start this it engages the wheels and wants to launch. Any advice on fixing this?

[@T_gaming28]

I'm not exactly sure what you mean when you say the TC is facing inwards but for the launching problem I'd say to turn the idle down

[@ScottieDobbins]

I got a 15hp on side by side it hard to start it has compression getting gas and spark

[@2183valerio]

I have one with the stock engine. There is a wire that comes out of it. Is that for the a light?

[@LeeLlewelyn-i5j]

Where can I buy Yerfdog wheels?

[@Kartastrophic]

Go power sports?

[@aaronquiroz2474]

Anyone know what how long that rear axle is. I'm looking to buy a new one on Amazon they have a 40 inch and 44 inch and is the axle diameter a 1 inch? Thanks

[@ddragonchannel1952]

how do i alight the converter sprocket with the gear? and what size bolts do i need to secure the gear?

[@joeyquinton6243]

I am looking for a starter for mine I don't know where to get one

[@johnnycashe1]

Dude this was so helpful. I know this was 2 years ago but how much did you end up spacing the sprocket on the Jack shaft?

[@Kartastrophic]

I couldn't tell you I'm sorry

[@markdahl9453]

Cool beans !!!

[@chrisish4979]

Your a Prius guy as well lol I also have 2

[@axelvazquez8941]

Do you have more 40 series torque converter for sale, how much how can find you?

[@thenervoussnail9342]

What do you think about the Honda 420s?

[@lizzard7473]

Poop

[@emersontjaden8857]

To keep the frame stock would I have to put a different exhaust and air filter on it ?

[@Achilles-ok8zy]

If anyone knows where I can get that mounting plate I would appreciate the info. The only ones I have been able to find is the cheap aluminum ones for like a 6.5 hp

[@Backroadmuscle]

What's the drill bit u used on that steering and size of bolt put in it

[@JumpoutJ694]

Hey man is that 420 governed? I’ve got the exact same cart that I swapped a Honda gx390 onto with a 40 series torque converter but it’s a slouch.

[@lizzard7473]

Try regearing it.

[@jesusadventurervargaspropu4510]

What chain did you use for this kart?

[@LuchMobGarage]

Looks good runs sweet awesome job bro good to see you tinkering 🤘🏻🐿🤘🏻 keep em coming 🤘🏻🐿🤘🏻

[@RicardoTorres-hp1sd]

What size of a socket does it take to take the bolt out of the rear wheels

[@aaronallison9815]

what size socket for the back wheel ?

[@lomsomesGarage]

Great viedo

[@oneeye6033]

I'm thinking of putting a DuroMax 420cc 16hp engine with a 40 series torque converter on an old 2 seater yerf dog frame. Do you think this will fit? I'm not too experienced with karts so any help/advice is greatly appreciated. Thanks!

[@Kartastrophic]

You can make anything fit with a welder..lol..

[@dloren6183]

Paul Wall babyyyy

[@ultramegamike5000]

Use your welder to cut the cable just one quick zap and itll burn through and weld/melt the strands of cable together so theyll never unravel.

[@mferrarorace]

Just make another engine plate that matches the holes and drill out the existing one. Right over the top bro

[@ACG7001]

I just bought a 420cc and have a yerfdog 3202, has anyone done this swap and what has to be done?

[@madmoe3657]

Just curious did you already do an engine swap on your yerf dog yet. I just test drive mine today and it rips

[@guadalupezarazua4857]

If I have a yerf dog, how can I adjust the drum brake and why do I have to accelerate it so that it does not turn off?

[@lizzard7473]

There is no adjustment to the drum. And its shutting off because that tecumseh needs a new carb. Replace the engine with a new 212cc predator. You're gonna be much happier.

[@bryceharbertson5703]

what’s the bolt size for the wheel?

[@andygutierrez5825]

I need help my front suspension is shot it has way too much inward camber any suggestions

[@tonyt4140]

Ditto for me. I'd love to replace suspension F&R w/ something hydraulic, but not sure what'll fit and what works.

[@frankcioffi5122]

I know why

[@dloren6183]

Is this way faster than a 212engine?

[@squishytacticalnuke6991]

Way faster

[@davidiniguez5958]

I have the 346cc motor what torque converter would I need brother

[@davidiniguez5958]

@Ryuhouji thankyou brother love your videos they help alot yea I have the spider box I swapped a 346 predator and I was iffy about what torque converter to use thanks again

[@lizzard7473]

Dont waste your money on a 30 series. Go with the 40 and be happy. Your just gonna have to trust me on this.

[@Sandoval0810]

I got...1 but idk how changue the oil help...

[@lexingram8622]

Watch this on 1.5x speed

[@kagutierrez90]

what torque converter did you use? i have the 420 cc predator. and tue Yerf dog . just needs a list of parts you used to get the yerf dog running.

[@jamardean4185]

How much are you selling a 420cc engine for

[@Kartastrophic]

I'm not selling any engines.. I had one for sale last year and it sold already.

[@lizzard7473]

18hp duromax. .

[@zack2277]

Wassup

[@davidiniguez5958]

Someone please help

[@robcarter2891]

Need muffler

[@monkeydude3987]

Also thanks for the tip on cutting the cable! Here is our build - we ende up getting a 3203 like this yours but the engine swap I'm doing is not quite the uprade as you, ha! www.diygokarts.com/community/threads/yerf-dog-3203-light-refurbishing.44586/

[@sharonbooker1272]

A call me