Yes, Giant Swords Existed, BUT...

[@Skallagrim]

If you haven't seen the follow-up video about two-handed swords against pike formations on the battlefield: kzbin.info/www/bejne/kJmonHlve7tpd7c

[@maxkore278]

[ultra greatsword] "you need magic or an exosuit" = dragon slayer, BKGS, Buster Sword [greatsword] "only viable in 2h, unless you're a giant" = flamberge, zweihander, odachi [longsword] "good for 2h but still viable in 1" = spadone, nodachi, estoc, messer, bastard [sword] "ideally 1h" = uchigatana, tachi, jian, falchion, dadao, khopesh, spatha [shortsword] "small sword" = gladius, dao, kopis [dagger] "too short to be any sword" = stiletto, kukri, Rondel, dirk its actually pretty simple [edit] - moved spadone down thanks to "kzbin.info/www/bejne/rWqwiZqLfpmYjNU"

[@lemoncobra6485]

I've read that the "waves" on the flamberge style zweihanders were for blocking and deflecting spears and pikes, but you probably already covered that in the follow-up video.

[@maxkore278]

@@lemoncobra6485 if anything that's secondary, increasing cutting surface is the main purpose

[@maiholiaw4927]

13:53 That is not a Naga sword, that is a "Waitlam" or "Waitsum" used by the Khasi & Jaintia tribe of Meghalaya, (formerly part of Assam) North East India. I know because I'm from North East India. And I think I have messaged you on your previous facebook page, regarding these "waitlam" and how they are mistaken as Naga Daos. You asked for my email and I told you that I would send one of these khasi swords to you. The Nagas used a "Dao" a short broadsword usualy 2ft long Come to your facebook page, I'll show you a Naga "Dao" and a Khasi "waitlam" You could have done more research on this one Kindly rectify the error

[@Skallagrim]

@@maiholiaw4927 Pretty sure you never send me anything about that, I have not seen a message about a "waitlam". The only info I was able to find about the picture claimed that it belonged to the Naga people. That's all I had to go by unfortunately.

[@Leftyotism]

If you put a ceremonial sword in a temple: Just make it too big to steal. Good solution eventually. xD

[@reyix9490]

Then a warrior with giantism comes in, takes it and goes to war

[@Vlad_Tepes_III]

@@reyix9490 And finds out he has a blunt, badly balanced, and probably fragile sword that'll be good for a single swing and break upon contact.

[@LordDragox412]

@@Vlad_Tepes_III Sure, but sometimes all you need is intimidation to make your enemies chose targets other than yourself because nobody is stupid enough to fight a giant in melee range. And then you get pelted by arrows because big slow target is an easy target.

[@bmxriderforlife1234]

@@Vlad_Tepes_III says the man who was Impaling bare people. Can't have been purely practical.

[@Leftyotism]

@@reyix9490 xD

[@JamJestKesh]

i've always liked, how in Berserk, the Dragonslayer sword was made as flex by a blacksmith, with no intention of it being used by anyone, and everybody acknowledges Guts as crazy for using something like that

[@cliffbooth1620]

Also we are given the explanation that guts used big 2 handed swords as a child so he habitually used much bigger and heavier swords since

[@somberyu]

@@cliffbooth1620 Indeed. He still has superhuman strength, of course, but it's a neatly explained fact, not said with words but obvious to the observant.

[@giulyanoviniciussanssilva2947]

Although Miura could attribute a magical lineage to Guts which would explain the pointy ears and superhuman strength and endurance, it would convince more than saying that he has used thick weapons since he was little, that the child was born malnourished from a corpse and started using disproportionate sword. Here comes Miura in a novel of the origin of Grunbed who simply carries a giant sledgehammer without having used large weapons during childhood.

[@cliffbooth1620]

@@giulyanoviniciussanssilva2947 the grunbeld novel is not miuras he just made some illustrations

[@DMofDMs]

"It was too big to be called a sword. Massive, thick, heavy, and far too rough. Indeed, it was a heap of raw iron." A dragon is something no man can kill. So what do you call a man who kills dragons?

[@Citrakite]

Imagine forging a sword for a god and having people hundreds of years later argue if a man could have used it or not.

[@isaacluna3851]

Pure blasphemy, I like it.

[@shinkkage5013]

i could

[@giulyanoviniciussanssilva2947]

Good idea for a story. Copied.

[@Socritiques]

That sounds like something Pratchett would write...

[@hwari3725]

I blame those cringey weebs for this

[@Agent719]

"It looks like something from Monster Hunter. ... It was made with the nose of a sawfish." So it IS from Monster Hunter.

[@jeanrushmer8192]

lol

[@MeneltirFalmaro]

Or rather it made its way into Monster Hunter.

[@Vlad_Tepes_III]

@@dawsVEVO Across space *and* time.

[@Ramash440]

Large fish parts being used in a weapon ? *Laughs in Gobul Spike*

[@therighttrousers343]

I clicked because the serrated thumbnail sword reminded me of the Tailblade Parallel, the Dalamadur Longsword.

[@GalvatronRodimus]

"Swords are cool, right?" that's...why I'm here.

[@rarespraypainthoodie3926]

i was playing tf2 as a demoknight yesterday and this came up on my recommendation

[@jazzboifuckicontm5239]

Hello there

[@rarespraypainthoodie3926]

sup

[@jazzboifuckicontm5239]

@@Nova-oc2ry no, did you?

[@Grigeral]

If the giant Odachi were often gifted to temples and linked with protecting samurai or other warriors, then I can only presume that they were designed and created in a way they believed 'only the gods themselves' could wield them.

[@d36williams]

this sounds like an awesome anime

[@purplehaze2358]

“It looks like something from _Monster Hunter”_ Given it was made with the parts of a sawtooth shark, it isn’t that far off.

[@DemonPrinceofHell]

You have good taste in channels, Dr. Bright

[@rcb5432]

Nah, if it was from MH the fish would be the blade. If you don't believe me, Frozen Speartuna.

[@apexzora4423]

Yeah an actual bone weapon LOL

[@Pihsrosnec]

@@rcb5432 ah, like in Terraria

[@rcb5432]

@@Pihsrosnec no, like the weapon from Monster Hunter called the Frozen Speartuna

[@MoriShep]

The giant Odachie were created by smiths to show off their skill, as the blades were extremely difficult to make as they were composite blades made of two metals they would easily snap in the forging process if even 1 step was done improperly. if the smith could forge that thing they could make a normal-sized blade of good quality

[@bmxriderforlife1234]

Depends. Some were also made as weapons some were made as shrine offerings and to show skill. Some that seem a little too big but not full blown huge size might have been intended against horses and used by two people. Long handle. Basically just let the horse run into the blade and take its legs. Comes from China originally.

[@DatBoiOrly]

I 100% agree with you the longer it is the more prone jewel steel will fail in most of the smithing process the longer it is the more time it would take and the more expensive it would be hence why it was given to the shrine as an offering to the gods I don't think the gods would be happy if you gave them a $5 sword lmao

[@kyle18934]

@@DatBoiOrly a 5 dollar sword from party city 😀

[@outsideiskrrtinsideihurt699]

@@bmxriderforlife1234 what Chinese sword does it come from? From what I’ve seen, the Odachi was the one to influenced the Miao Dao following the Imjin war.

[@lancehobbs8012]

Do you mean Ōdachi ? They are only a little longer than katana , but there are some historical examples that are oversize collectors peices for display only. Tell me what are the 2 metals you think they used though , that parts news to me . If one metal was carbon steel, what was the other?

[@unitariansavage8513]

I get your points about the odachi being too big to be used "effectively", but I can imagine a feudal warlord giving one of his tallest peasants the biggest sword he could find for shits and giggles.

[@kuronoch.1441]

Well, in the Sengoku period, the Asakura clan had once employed a pair of giant samurai, father and son, who wielded huge odachis, the former wielding such a huge one that Sephiroth would even blush. The sword at 13:01 is actually his sword, though the measurement only included the blade itself, so for the handle around 2 feet should be added, give or take a couple of inches.

[@captaindred342]

@@kuronoch.1441 Facts. Thank you. :D

[@alexhulea2735]

That odachi is mentioned on several lists. Also regarding it on the lists is the fact it was made for a temple and has spent most of it's life as a temple sword, never being used in combat

[@nikmenn2751]

The fact is, japanese peasants have never been in good fighting condition, but some samurai were strong and bulky enough to be compared with oni - demons. And they prefered to use a great club - kanabo, as it was more effective to utilize the giant's strength.

[@toheekang174]

@@kuronoch.1441 they sound like a Sekiro boss

[@soluciones11s.a.s81]

As soon as the video starts I see a message saying “you don’t have the stats to wield this weapon correctly”

[@widdershins5383]

You can still use it, but it’s not as effective lol

[@texasbeast239]

You are...overburdened.

[@marcinpilarski2412]

Just two-hand it lol

[@soluciones11s.a.s81]

Put your stats points in faith they said, it will be useful in late game they said.

[@rancorious7785]

@@soluciones11s.a.s81 LIGHTNING BABY

[@uncabob214]

Honestly as cool as giant swords are, the idea of a really big dude with a halberd is actually a little more intimidating to me.

[@eazy8579]

Absolutely; a good plate harness is probably capable of keeping one of these swords from killing you, but a halberd will still do you in

[@mimszanadunstedt441]

Lubu

[@CosmicG777]

Even in the Bible when talking about David and Goliath, the giant, it is true that the writers gave more attention to detail on Goliath's spear rather than his sword. In fact, very little detail is given about his sword but his spear is given the size, weight, the metal that it made from, etc.

[@Yikeo]

@@CosmicG777 yep and the bible also goes into detail about creatures with hundreds of eyes 😐

[@zakmarchosias]

When i started hema i learn the dynamics w/ longsword, but with experience i became mainly a spear user and with time i could keep it up with my mentor on a sparring session, but when he wore his main weapon, a halberd.... BOI... Even with a spear in one hand and a side sword he beat the shit out of me as i was a 4 yo trying to beat Tyson. Good times... I learned to respect halberd and definitely is the most versatile, unpredictable and mean weapon.

[@taylankammer]

If there are two 7 feet swords from that time, that must mean Grutte Pier dual-wielded them!

[@justguy-4630]

With no clothes on-Wait. What?

[@_uchiha]

Lmaoo

[@sticktostick6669]

"Katanas are cool, right?" "So what even cooler?" "BIG KATANAS" Sir Alonne

[@patrickmoritz2475]

i searched for a dark souls comment, and there it is

[@chadthegiga6235]

Don't forget the nicely waxed floors

[@Ryan-mz4oe]

Sudoku

[@frozezone2947]

@@chadthegiga6235 what ?

[@chadthegiga6235]

@@frozezone2947 Sir Alonne's floor is nice and shiny

[@UnCivilEngineerIRL]

Ye olde compensating

[@seekeroftruth5655]

😂😂😂😂 I laughed hard when I saw this as the top comment

[@ZatoichiBisch]

If you're on horse it's handy.

[@jean-lucpicard3012]

That's what she said Jacob

[@Nzzertral]

420th like

[@culture4519]

IT IS PERFECTLY ADEQUATE

[@DreadX10]

A point you didn't mention. Making bigger swords requires a higher skill of the maker. Making these big ceremonial swords is also advertising the skill of the maker. I suspect some of them were actual masterpieces. By that, I mean, swords that were made by an aspiring blade-smith to receive the recognition to become a master blade-smith.

[@ThatCreepyReading]

I love thin long big swords

[@khoile4271]

tHaTs wHaT sHe sAiD XDXDXDDDXXD

[@Doge-bz3vj]

Name checks out

[@yuukimasamura5143]

I prefer width 😉

[@Garl_Vinland]

I love thick short small swords

[@TrueMentorGuidingMoonlight]

Sephiroth wants to know your location

[@DaShikuXI]

So monster hunter is realistic and Sephiroth is real. Got it.

[@DavidSmith-vr1nb]

Obviously those were tongue-in-cheek comments. There is more to take away from this if you don't insist on being contrary at the first opportunity.

[@ProfessorShnacktime]

@@DavidSmith-vr1nb you're taking his comment way too seriously.

[@mirzaiscandle]

@@DavidSmith-vr1nb you're the type of person that see's molecules when the teacher hands you the microscope to look for microorganisms

[@Weird_dude265]

@@DavidSmith-vr1nb Did you watch the whole video? He said Monster Hunter weapons are plausible and Sephiroth actually existed at 15:33. The man who founded Square Enix is actually related to Sephiroth which is where he got the idea for the character.

[@resentfulsoulofthetoilet589]

Aerith died for real, Got it

[@cameronweaver6991]

I know that giant swords just aren’t useable but I still like to imagine someone strong enough to pick one up using more of a one shot kill strategy, you don’t need to recover and manoeuvre it if your opponent dies on the first swing

[@quelquundautre3292]

Problem is the durability of the sword then x) That's why you should use siege weapons for self defense

[@madjackgamingandfitness498]

I think at some point you'd just want to swing a blunt weapon down, flesh is easy to cut even with a dull blade, but if they are in armor, a blunt weapon would just crush internals.

[@federicobinaghi8118]

Try out Berserk then.

[@giulyanoviniciussanssilva2947]

@@madjackgamingandfitness498 ouch.

[@BlueLobster92]

@@madjackgamingandfitness498 blunt weapons are heavier, also considered less honorable of a weapon.

[@Godzillawolf1]

I actually do know of a historical example from my area, Skall: Peter Francisco, the Virginia Giant or the Virginia Hercules was a Revolutionary War hero who was almost 7 feet tall and known for being incredibly strong, enough so he was able to carry a cannon at one point and there's artwork depicting him reaching up and throwing a British soldier off his horse with one hand. He was known as being one of the best soldiers on the American side to the point George Washington himself said “Without him, we would have lost two crucial battles, perhaps the war, and with it our freedom. He was truly a one-man army.” It is believed he had Gigantism, though unconfirmed. Washington held Francisco so highly he commissioned a custom broadsword for him that was around six feet long, longer than most people of the time were tall, which he did wield as a traditional broadsword rather than a great sword. He did use it in actual combat, very effectively I might add, and is recorded as once having killed eleven British soldiers in a single battle with it. Not all that surprising given his size combined with the six foot sword would give him a huge reach advantage over most men of the time and his sheer strength combined with the weapon's heft would make it rather difficult to defend against him in close quarters. His descendant, Travis Bowman, sometimes portrays him in reenactments. Bowman is roughly equal in size and is capable of using a replica of the broadsword. Unfortunately, the broadsword itself is lost. Years after his death it was presented to the Virginia Historical Society by his daughter, but it's since disappeared.

[@mreface5772]

While he was historically incredibly strong. Peter Francisco didn't carry a cannon. Modern strongmen even tried this and there is no way. As well as him throwing an entire person one-handed. Maybe pushed him off so take the cannon carry with a massive grain of salt.

[@chopstick1671]

7 feet doesnt sound like gigantisism to me, it’s tall but not super uncommon (although I’m a dutchman so might have a skewered idea of it). I have a friend who already was 7 feet when he was 16, and although not common, it wasn’t that unheard of.

[@mreface5772]

Maybe he did carry a cannon it must have been a very small one. Cause there is just no way

[@mreface5772]

@@chopstick1671 it's not gignatism. but the dude was massive for his time. Maybe he did have the condition of gigantism but maybe not only the sheer height but maybe the width paired with him being 7ft

[@chopstick1671]

Oh I read over this part, but broadsword? Do you mean greatsword? Because a 6 foot basket hilted broadsword, no way.

[@justinbell7309]

I'd imagine most warriors with gigantism probably just uses slightly above average weapons. When you're that big and strong and already have reach, you probably don't need much more weight to be effective. Why swing around a huge sword at the same speed as everyone else when you could just swing a slight above normal sword with your gorilla arms FASTER than everyone else?

[@TheMalitias]

Just give him a spear and a giant bow and call him Ballista.

[@oedipusrex353]

@@TheMalitias give em a big sling and call em david

[@quintoblanco8746]

I can't imagine somebody with gigantism actually fighting. Presumably such people would be in high demand as a ceremonial guard, and then a huge sword makes a lot of sense. Or they would make an impressive servant.

[@morrigankasa570]

@@quintoblanco8746 Although with their large size just give them a Giant Metal Club or Two-Handed Warhammer balanced in weight and they could just smash through people.

[@quintoblanco8746]

@@morrigankasa570 That would be less ceremonial :-)

[@BuddysDIY]

Sooo dope. That 12 foot japanese sword would be my first pick on the battlefield. I'm 5'8 so it'll work fine

[@samuelgenerette8906]

Weeb

[@JKAV_76]

Lol

[@tylerberube5668]

Pretty sure in the video he describes how theres no way to successfully wield it

[@BuddysDIY]

@@tylerberube5668 it was cleary a joke

[@殺意の波動に目覚めたリュウ]

@@samuelgenerette8906 westaboo lol

[@CntBckt]

I thought pieces like that Norimitsu odachi were practical ads. "Omg this smith is skilled enough to make blades THIS HUGE without twists, cracks, etc." Was that not a thing? Ceremony and decoration are the only reasons I've thought of that make sense. :\

[@ScottKenny1978]

Wouldn't surprise me.

[@kyle18934]

It would make sense. And maybe they would keep it in the shrine, so people who would want a sword would see it and ask questions about who built it

[@archersterling6726]

Yes, and probably they would put it in a shrine because they just didn't know what to do with it lol

[@Stribog1337]

@@archersterling6726 they put it in the shrine in hopes the big ass samurai god gets interested

[@everinghall8622]

Maybe they were made as an offering, after all, a god would like to have a huge grand sword right?

[@j3tztbassman123]

Wall hangers, existing to impress people since swordsmithing became an art.

[@fransthefox9682]

Well at least the Norimitsu Odachi is forged and tempered well. Still useless in combat though.

[@WikkeSchrandt]

Awesome to see Grutte Pier get a shoutout. There's still legends of the guy over here, including beers and places named after him.

[@ghostsdragon9222]

yhea and was really surprise the sword was a fake

[@uncledoctor6920]

The guy who was said to have decapitated several soldiers with single blows of his sword? Iirc there's a statue of him in his home town of Kimswell.

[@janpostma5381]

It isnt fake. Theres a new study proving it was used and period accurate

[@WikkeSchrandt]

@@uncledoctor6920 I've never heard of Kimswell, I'm talking about the Frisian guy

[@bobloerakker7010]

"Kracht in de nacht" 11,5 procent bier, slaat in als zijn zwaard.👌🏻

[@GreatWightSpark]

So the Mountain that Rides was Dutch, not Icelandic.

[@Fuzz82]

Look op The Dutch giant (Olivier Richters) standing next to the Mountain.

[@rasmusn.e.m1064]

He would probably have preferred to be called Frisian, but yeah.

[@Wanker527]

@@Fuzz82 he’s a few inches taller but over 100 pounds lighter than Haffthor...

[@H4FF]

As mentioned by someone else, not Dutch, Frisian :) He is known/seen as a symbol for Frisian independence, as that is what he fought for. I always love when he's brought up as I'm Frisian myself, even though I'm sure much of what is said about him is more mythology than truth.

[@dashiellgillingham4579]

'Biggest man' is 'biggest man' no matter what culture produced him.

[@Hyde_Hill]

As a Frisian I appreciate the look at Grutte Pier. He really is what one could call a folk hero. He really existed and he really did some remarkable things, at the same time his legend has been embellished.

[@weeweepoopooman8883]

fucking friesland

[@Bigtimecharlie1349]

Mooooo

[@Benderisgreat219]

Saw fish "saws" are actually very very hard, feels like bone and is heavy, not as brittle as you think, but they def had to add a hardening agent to it for it to be able to take blows from another sword, but yeah, dried out saw fish "saws" are a really good go to for "nature forged" sword. I physically have seen and held a dried saw fish "saw" so thats why im putting input btw.

[@rickydiscord7671]

I used have a dried saw fish tip when I was little. they can actually hold for while. they're just not for brute use. is like with japanese sword. you can't just use them vs armor. they are meant for cutting meat. try for force on an armor and if your angle is off. you would easily break the blade. saw fish peaks are like that. you can't just be rough with it all the time.

[@wor575]

the tribal sword shown at the end would go under the "pole-sword" category. Shad has a video on how great they are

[@greganderson6371]

Of course he does. It’s basically a Stick+

[@IamOutOfNames]

That's what I was thinking, that actually looks usable.

[@angelarch5352]

@@greganderson6371 A sword is also basically a stick, so it's a stick on a stick! Even better!

[@petersmythe6462]

"The blade is actually part of a sawfish." So... Monster Hunter is historically accurate?

[@atomicash2475]

yes, because they didn't cut the tail

[@elpolloloco3827]

Neanderthals already made animal bone tools

[@sirrismendozasunlessrealms5775]

Wait, you can make tools and weapons out of raw materials? Who would have thought?

[@giulyanoviniciussanssilva2947]

@@elpolloloco3827 but, not big and thick.

[@xenosmoke8915]

In Scotland we had Claymores. We’re generally taught that they were made only for cavalry and that nobody was actually swinging the sword, rather, the ‘swinging’ was done by the galloping of the horse you were upon.

[@derekambler]

The word Claymore just means 'long sword' as Tramore means 'long beach'.

[@LendriMujina]

Funny enough, a claymore was one of the last swords used in a major war, wielded by officer "Mad Jack" Churchill in World War II with no horses in sight.

[@hennerzz3460]

@@LendriMujina claymore has two translations/meanings though - the two handed claymore that we find in video games and that is being discussed here isnt the one churchill used. Churchills claymore was a baskethilted broadsword ( its other translation/meaning )

[@hennerzz3460]

also it was ww1 that mad jack was taking heads and bagpiping like a madlad ... sorry to be pedantic

[@agentoranj5858]

@@hennerzz3460 If you're gonna be pedantic at least be correct. >John Malcolm Thorpe Fleming Churchill, DSO & Bar, MC & Bar (16 September 1906 - 8 March 1996) was a British Army officer. Nicknamed "Fighting Jack Churchill" and "Mad Jack", he fought in the Second World War with a longbow, a basket-hilted Scottish broadsword, and a set of bagpipes. - Wikipedia

[@pathfindersavant3988]

Grutte Pier: "I'm just built different."

[@CAARaeed]

Fake natty daddy? Let's discuss...

[@Hooniiii]

He's from Friesland and I'm to so that's kinda cool I guess

[@davidelatini6815]

@@CAARaeed i see you are a man of culture

[@tlsgrz6194]

What if Grutte Pier war actually 14ft and there are three of these „Grutte Pier Swords“ because he dual wielded them and had another as backup?

[@gmann215]

He dual wielded and held the third one in his mouth. He had very strong teeth.

[@AFCAWorldBodybuildingArchive]

@@gmann215 i think he went by the name of Lorenor Zorro or something like that.

[@mietek3921]

Im not trying to be rude, but is this a joke or not? 14ft is like 5 meters

[@mietek3921]

@@dawsVEVO ok cool i see

[@bubblemonkeys]

@@mietek3921 I like how you quickly learned the sarcasm. Way to catch up

[@DED_MEEM]

I not sure if Pier translates to this but the idea of a dude named Big Peter rolling around just wrecking dudes with a massive sword is great.

[@TomaszDurlej]

This Odachi is clearly “look I can forge so huge pure metal”.

[@GuitarsRockForever]

It was forged for the emperor.

[@TomaszDurlej]

Emperor or not is always part “I give something impressive” and part “look what I can done”.

[@TrueFork]

I'm sure it was for one of those giants whose skeletons were discovered as seen in pictures that were totally not photoshopped

[@MrManifolder]

*Actually, the sword housed at Atsura shrine (tarotachi) is believed by historians to have been used on the battlefield. It is constructed for combat and there are fine scratches and other indications of field use on the blade.* It belonged to Makara Naotaka, supposedly a giant of a man who (along with his son Naomoto) fought a valiant rearguard at the Battle of Anegawa on the side of the Azai clan. The father and son challenged samurai from the opposing army to a series of duels which became such a spectacle that it tricked the Oda/Tokugawa forces into slowing their pursuit of the fleeing Azai. Naotaka and Naomoto killed many in the duels before finally falling in combat and the Azai army was allowed to withdraw in good order. To my knowledge, it is the longest sword known (so far, in recorded history) to be used in actual combat. You can find some quick info on the sword on Japanese Wikipedia if you search for 太郎太刀 (tarotachi) and use a better translator than Google (like Yandex).

[@Rednecknerd_rob9634]

Considering that Andre The Giant was in so much pain, do to gigantism, and could hardly move without help like crutches, etc., I would suspect that a person with gigantism in the medieval period wouldn't be so mobile as to use a sword effectively.

[@bobloerakker7010]

Maybe nutrition plays a part too. Also the frysians are one of the largest peoples in the world, without gigantisism. I see people of 2 meters tall on a daily basis. But who knows...he could have been in pain. Actually he was in a great deal of pain because his family was murdered, but that's a different story.

[@Rednecknerd_rob9634]

@@bobloerakker7010 I mean considering just a quick search of Andre shows that he did have gigantism. And nothing shows up about his family being murdered.

[@ArkbladeIX]

@@bobloerakker7010 6'5 is extremely different from 7'4. Just look at the NBA. Almost everyone above 7'2 retires due to back and knee injuries.

[@tomred868]

I hate sharpening flamberge blades and trying to wield a tree branch should be enough of an example towards not using the massive swords.

[@HappyBeezerStudios]

That swordfish sword probably was just a result of autocracy: "Sire, we cought this fish" "Make me a sword out of it." "But mylord, it has no practical use in combat" "I'm the King, you do as I say! And I want a sword out of this!"

[@mareksicinski3726]

sawfish not swordfish it is a result of fashion and style

[@mareksicinski3726]

he was not a kin, and you don't need autocrtacy to commission stupid things

[@sub23DaRkNeSS]

@@mareksicinski3726 jesus you must be fun at parties...

[@TeaSerpent]

There were a bunch of sawfish blades in the Qing dynasty imperial collection. There are still tons of antique Chinese sawfish swords floating around in general. Although in China they were used as ritual implements, mainly by spirit mediums. They are considered one of the five sacred tools of the Tangki spirit mediums in southern China. All five of the tools including the sawfish sword are meant for ritual mortification of the body as a blood offering via self flagellation. There are tons of videos on youtube if you know where to look. They were also used by one of the five divisions of barbarian spirit troops in traditional Chinese religious beliefs.

[@max7971]

@@sub23DaRkNeSS saying dumb shit doesn’t make you fun at parties.

[@CFEntertainment1]

I started with searching for a colosal sword build in elden ring and ended up here. Not disappointed at all.

[@stilmaho]

I remember a giant sword in Japanese history that was designed to "butcher the enemy general alongside with his horse" but for some reason nobody could use it

[@boxtank5288]

Weight.

[@stilmaho]

@@boxtank5288 *gasp* who would've thought

[@BSJINTHEHOUSE420]

Giant swords existed. Giant Dad - The Legend Never Dies.

[@TheArcticWonder]

Praise the sun! Y

[@dragonfelgrand9304]

BECOME UNSTOPPABLE

[@normanartoriano9762]

And dont forget the pose lol

[@proboz]

Wot rings u got?

[@Riccksu]

WHAT R U, A CASUL?

[@CSelH]

Wow, it's just now dawning on me, thanks to the giant Odachi, that the method of displaying the swords is representative of Shinto shrines. Completely makes sense, just not sure why I hadn't explicitly notice or heard it mentioned before.

[@Bacteriophagebs]

Bearing swords are still being made and used today by the U.S. Air Force *for ceremonial purposes.* They also tend to look even more like they came from an anime.

[@judahboyd2107]

I can't wait for a marine to steal one. Then we'll find out if practicality is required for lethality. Also this is my favorite thing I've learned today. Thanks.

[@makkasweet5011]

3:47 I mean Bloody Hell just the Fear factor alone is More than Practical, the Thing Looks like a damn One Piece weapon!

[@kyle18934]

Are you saying you don't want to get wacked by a bunch of teeth??? What could go wrong, a little bit of acupuncture hasn't hurt anyone lol

[@arthurmorgan7645]

@@kyle18934 they are going to drag the blade through your skin after they stap you a thousand times it would sever everything and you'd bleed to death oh and it'd hurt like hell

[@kyle18934]

@@arthurmorgan7645 I was being sarcastic 😉

[@arthurmorgan7645]

@@kyle18934 ok i feel kinda dumb

[@Kid_illithid]

I’ve always wondered if making huge swords could have been a show of skill for a blacksmith in some places or periods. Something to really wow the people and the nobles and drum up business I don’t know much about black smithing, but it seems like working a gigantic odachi without anything going wrong or breaking somewhere would take a lot of experience to pull off.

[@ambience273]

"That thing was too big to be called a sword. Too big, too thick, too heavy, and too rough, it was more like a large hunk of iron." - Yuuki Asuna

Yuuki Asuna ? but Isn't that quote from Berserk ?

[@ambience273]

@ woosh

[@JohnSmith-po9cf]

That's what she said.

[@ep6600]

@@ambience273 Saying woosh should lead to an instant ban from commenting on youtube ever again

[@ambience273]

@@ep6600 why?

[@ethanv7330]

7 feet is not exactly outside of the realm of possibility in the Netherlands.

[@firebladeentertainment5739]

unless youre unusually short like that one person i know, you guys tend to be GIANT!

[@edi9892]

I'm Austrian and almost that tall. My great grandfather was 6.5ft and I'm a few inches taller.

[@firebladeentertainment5739]

@@edi9892 jeez and here i am, the below average german (1.76m or 5'9'' is my height, actually shorter since when they measured me at the office they didnt asked me to remove my shoes, which made me taller a bit)

[@blakebailey22]

I remember reading about the Potsdam giants in Prussia, do you think you guys are naturally taller because of the influx of people with gigantism around the 17 hundreds?

[@edi9892]

@@firebladeentertainment5739 do you know Air Berlin? I had once the misfortune of flying with them. I couldn't put my legs in the way it was intended, but had to put them with the knees near my head and I was still squeezed in with the front seat pressing against my legs. I called a stewardess and could convince her to let me resettle to the seat at the emergency exit (which I wanted to book, but they didn't let me). The bedends of hotels, the fact that I can't get a single trousers in any shop in all of Basel or Zürich. That I can't put my arm straight up in my own flat without banging it against the ceiling... I wrecked a few chairs just by my mass and hip size. I broke a steel table by sitting on it. I hate mass production and an normed hight of 180cm and weight of 80 kg.

[@TjarkoTarnen]

One giant sword I’d be very interested to see if there is any knowledge of, is the sword wielded by King David. Goliath was a giant, not sure we know what size, but after killing him David wielded Goliath’s sword in many battles using it like a symbol of strength. Apparently he was still very proficient in its use.

[@Ninjat126]

Just searched up the NIV to read the relevant passages (1 Samuel 17). The Bible doesn't say anything particular about Goliath's sword, despite being VERY particular about the size of the guy himself, his armour and his spear. (Apparently different texts give different numbers, though?) Regardless, the sword (and javelin) carried by Goliath aren't given nearly as much importance as the guy's armour, spear, and his sheer size. Possibly indicating that they're just "normal" weapons? The spear, on the other hand, was allegedly MASSIVE. Someone's made a replica based on the biblical description, and it's kinda terrifying. Too big for a human to ever use, honestly, so presumably the biblical description has been exaggerated from the "real" history.

[@TjarkoTarnen]

@@Ninjat126 Goliath's spear is roughly 12ft long making it, not quite double to double a normal spear length. That generally would mean goliath was about double the size of a normal man, which isn't unheard of. There is also a race of giants mentioned as the sons of Anak (Numbers 13:33). The Israelites didn't want to fight them and so exaggerated their size here, saying "we were like grasshoppers to them." Standing next to someone double your size would make you feel like a grasshopper I reckon lol. The main text I know of about Goliaths sword is 1 Samuel 21:8-9. Where David asks for a weapon and says there is no other sword like Goliaths. It must have been small enough for a normal sized human to wield though since David could. I just wonder if there is any other material other then the bible that talks about it, since there are other documents recording Jewish history outside of the bible.

[@juliabarrow-hemmings6624]

@@Ninjat126 The earliest versions of the story of David and Goliath all agree on his height being 4 cubits and a span (Around 6'9"), whereas the later Masoretic Texts that most modern Protestant bibles used for the Old Testament give him a height of 6 cubits and a span (About 9'10"). Its likely that his height was increased at some point to make him sound more intimidating and David's defeat of him more impressive. Either way, he was certainly tall for his time especially if you bear in mind ancient people were way shorter then modern people, where 6'9" would be tall today it would have been gigantic back then (and he was a warrior so likely fair large and hefty, so having a big spear makes sense), however, most swords in the levant and surrounding areas at that time were single handed swords, the spear was your main weapon so having a smaller sword that you can have on your hip just in case makes a lot of sense, so it also stands to reason that Goliath's sword was probably a regular, if very well made, sword for the time, so of course David too could wield it. This also goes for javelins were increasing their size isn't super important and they are generally a one handed thing so they wouldn't need to grow as much for a giant user.

[@CreativeUsernameHere-r1k]

well, the problem is biblical measurements are not always accurately translated and there is a debate about goliath's height so we'd be hard pressed to know the size of his sword, maybe it was longer than usual

[@yorkleroy5605]

@@TjarkoTarnen there were giant spearheads and chainmail found in that area, and they had marks that showed they had been used in combat. i found the video! kzbin.info/www/bejne/mp24e6uEe96FeK8

[@tasatort9778]

My personal opinion on flamberge blades is that, because they were harder and more expensive to make, they were status pieces intended to show the wealth, and by extension, the skill of the wielder. Yes there may be some advantages, but are they enough to warrant the extra expense?

[@dande-lion]

Idk, I always thought that the waves work like a breadknife

[@hdnfbp]

Honestly for many people that blade could even be good for moral reasons, imagine the fear of fighting a blade like that, in a geometric scale, the ones with with many waves would make a "saw" effect, not sure if it would help on the cut but the ones with a lighter wave would make more area for a slice in less time, tho the area is real small so no big advantage there

[@TsulaAngenati2292]

I thought those two little spines on them acted as secondary guards for half swording

[@Seriously_Unserious]

Well, if you flash enough cash on the battlefield, you're probably more likely to have the enemy want to capture rather then kill you. If you're rich enough to afford fancy weapons and armor, you're rich enough to afford a good ransom. But the enemies who capture you can only ransom you if you're still alive. So the question then becomes, how much extra expense on your combat kit is your life worth?

[@ViktorTheMusician]

Always seen them associated with mercenaries, and I would imagine that freelance fighters who don't have to always be prepared to go to war (and that get paid double when they do) have the time and money to spare for one to be forged. Also I just realized that I guess the same could apply to anyone else. Its not like they can't just have a regular sword while they wait for their fancy one.

[@stricken1666]

Been watching skallagrim for years and I've come to the conclusion that he escaped valhalla somehow and has been wandering the world for thousands of years. He's too casually knowledgeable, like as if he was there when people used these old weapons.

[@arron.barnett]

The sawfish one blew my mind. Not because someone made a weapon from one, but because I had no idea swordfish were so huge!

[@tetravega567]

Swordfish/Sailfish/Marlins are not the same as sawfish. Sawfish are related to manta/stingrays/sharks

[@pumpy2728]

That big dude in fluted armor from brunswick be like: " *nice* "

[@DemonAbyss10]

Was always told the impractically sized odachi were basically intended as a test for the craftsman.

[@danielantony1882]

Until you enter Shinto, and realizes that there are mythical giant humans bigger than 7.34.

[@TrueMentorGuidingMoonlight]

Or maybe also a test for the worthy swordsman who could wield such a weapon. Guts wants to know their location.

[@Candlemancer]

That was one of my immediate thoughts too. Those things took a lot of work and skill o make as it was, a giant one could definitely be the smith testing himself/showing off. Then donate it to a shrine where they show off your work to even more people.

[@Skallagrim]

Yes, absolutely. Making such a large and especially long blade is very difficult... Easy to have it warp or crack during the heat treatment.

[@marcelOberauer]

If those odachis were made only as wall hangers, I don't think the blacksmith has done all the same process as with a real sword, like a nodachi.

[@kansaspartan7625]

As a larger dude myself, I would say that a standard sized sword would be a better option than a special one thats made larger or to “scale”. Mainly because it would be easier to use and because it’s technically lighter it could be swung faster and with more force.

[@heygek2769]

maybe ever so slightly larger so you have an even bigger reach advantage (also, don't underestimate the intimidation factor)

[@toxicdermyillunary4103]

Big giant sword exists but..... Are you GigaChad enough?

[@wrdlbrmpft9635]

We found him, everybody can stop commenting now. The top comment is right here.

[@saiyanninjawarriorz]

Best comment here🤣

[@mix-n-match834]

Norimitsu Odachi looks like something that could be made as showcase of swordsmith's skills. I'm pretty sure that making sword this big and still making sure that it's quality is top tier is massive achievement and art on its own.

[@slktool]

Just the forge and amount of men needed to move the hot metal quickly...wowzers!

[@kuronoch.1441]

Well, as a practicioner of one of the largest swordsmith schools (in this case Bizen Osafune), he certainly had to.

[@Leftyotism]

That's proof Bayern (Bavaria) even was nuts back in the day.

[@dreadnought8363]

How is Bavaria crazy today? I'm from there and maybe I'm just blind to it😅😅

[@mephistophelesthesilentchi3446]

I now have the strange urge to put my grasses on before watching any video on giant swords.

[@Cormano980]

Tell me why, tell me why

[@richhartnell6233]

@@Cormano980 Tell me what you say

[@mamamia5668]

Don't know why. Don't know why

[@hugochavez1287]

Filipino here. A lot of our one-handed swords have the same philosophy of these European greatswords. The idea is a "chop" over a "cut" like say... a katana with it's outwardly curved profile. There's a particular Filipino sword called the Kris which also has a wavy flamberge style edge. The reason for that is that it's though that a wavy edge is easier to withdraw from the flesh and bone of an opponent you've successfully chopped. Most of our swords evolved from timber felling instruments. That's why they're all "choppers" and they tend to be more top-heavy and seemingly too heavy for one-hand. But humans are unlike trees. They're wet and squishy on the inside and getting your sword stuck in them is bad when they might have their mates nearby upset that you chopped them. I can easily imagine a flamberge burying itself into it's victim far beyond the force of the man wielding it. His chop was augmented by centrifugal force that comes with swinging suck a heavy sword. Now he needs comparative strength to pull it out of the bone and sinew of his felled opponent. At least a wavy edge means that some parts of the blade aren't buried in as deep as the others and less strength is needed to release the vacuum formed from the victim's blood.

[@jakebrown9781]

I'd always thought the flamberge was for binding

[@anthonyhayes1267]

Judging from the relatively gentle serrations on my pocket knife (a Victorinox Swiss Soldier's Knife if you wanna look it up) I tend to agree with the idea that it could cut better than a flat edge. It has served me admirable in cutting all sorts of material.

[@Kevin-qt4vy]

Japanese: We don't have enough steel.. Also Japanese: Lets make a large unusable sword.

[@eagle162]

That is a myth at this time, Japan did not have a problem with steel.

[@Aereto]

@@eagle162 Not the problem making steel, but sourcing steel, thanks to iron source quality.

[@ineednochannelyoutube5384]

@@eagle162 Yeah. Thats why they didnt make spring steel, and kept to the shitty mild steel that didnt allow for a thin blade to support itself, or full plate harness to support its weight, or bulletproof platr of any kind... No. Japan didnt have proper steel until the second half of the 1800s.

[@eagle162]

@@ineednochannelyoutube5384 oh boy you can read the link, there's there's evidence Japan knew and even made Spring Steel as well as other cultures like what is now China but it went in a different direction it's a pros-and-cons thing heck the Ming Dynasty and other Asian countries adopted Japanese swords, they made thin blade particularly in older periods again read the link and also I would also recommend the 2 part article: japanese sword " myth busting" on Gunbai:Japanese Warfare. That website also have articles that talks about plate armor, the weight of the armor and yes bullet resistant armor, that was all made in Japan.

[@ineednochannelyoutube5384]

@@eagle162 You linked a quora page, not a peer reviewed article. I have heared other assert that japan could produce spring steel, and have so far not seen anyone present compelling evidence. But if there is a respectable paper pointing to it, I will read it. As for it being a choice, just no. There is absolutely no advantage to a katana style blade over a traditional one, and china most definitely did not adopt it.

[@anasimouse4063]

I was told by a sword and armor historian and appraiser In Tokyo that the Odachi was given to monks living in monasteries and shrines to defend from Cavalry. The Odachi that was shown to me was also different looking because had a much longer handle that went along with the blade. the explanation he gave me is that it was meant for two people wield it together to take out horses or dismount riders. He noted that there where Ceremonial versions of Odachi much like the more elaborate Katanas he showed me and that the example before me was the type that actually had been used and found in bulk.

[@IPostSwords]

I wrote that imgur writeup on Grutte Pier, and thus I have a giant copypasta on Pier Donia, if anyone needs a copypasta for the next time they see it pop up on the net. You may have seen this sword floating around on the net recently, as this photo has been making the rounds again: This is normally described as "the sword of Grutte Pier Gerlofs Donia", a Frisian folk hero. He was militarily active around 1515 to 1520, and was reportedly extremely tall. His stature and the folklore around him have led to some outlandishly erroneous claims being made about him. Today I am going do dispel one of them. The sword pictured here is a "bearing sword". It is not even a unique example of a bearing sword. It is 2.13m long and 6.6kg, rather too heavy to have ever been used for combat even by a strong and large human. It has twins in the royal armouries in Leeds (accession IDs IX.1024 and 1025) both of which significantly predate Pier. They're from the early 15th century, 1400 to 1430, as is the sword pictured in the OP, and were thus made long before he was born in 1480. There is another similar swords in the Rijksmuseum in the Netherlands, ID: NG-NM-522. These are bearing swords, held by a sword bearer (thus the name) at the front or rear of processions from cathedrals to city halls, and they are entirely made for ceremony. Their blade geometry, balance, and heat treatment is not conducive to use in combat. They are oversized, overweight (6.6kg in this case), and suited only to their original purpose. Both this sword, and NG-NM-522 have "IN-RI" inscribed on the blades, further indicating their religious connection. It is quite probable that these swords went into storage in the 16th century when Protestantism swept threough the Netherlands, and the Saint's day processions were abandoned along with other trappings of Catholicism. The Leeds swords are single fullered, scaled up bearing swords around 2-2.2m in length with straight crossguards, Oakeshott type XIIIa blades, and a variety of Passau makers marks. Just like Piers' sword. They also have the same distinctive octagonal pommels. It is worth mentioning the RA examples have diamond cross-sections past the fuller, and this does not, instead having a lenticular section. It may have been made in another workshop to meet market demands for bearing swords. The Rijksmuseum example also has a hexagonal pommel, plain guard and flattened diamond cross section blade. It is therefore inaccurate to say this enormous bearing sword was "made for him due to his stature" when it is clear it was made decades before his birth. The sword pictured was documented in the town hall of Leeuwarden in the year 1791 by Jacobus Kok - long after his death in 1520 - and attributed to him posthumously because he was large, and it was large. It was also one of two such swords found in the town hall, the other was also a processional sword. The other sword was posthumously attributed to Wijerd Jelckama, a lieutenant under Pier. There is no explanation given or attempted as to why these two swords happened to be in the ownership of the town hall, nor why two folk hero's were using bearing swords made decades before they were even born. Town halls were a typical storage location for processional swords, as the processions were official events organised by the towns. Another common occurrence is that saints days parades and processions were run by cathedrals, abbeys, and churches, and we also find a large number of bearing swords in storage in religious institutions. There is no doubt that this sword predates Pier, and was made as a bearing sword. it is incredibly unlikely he owned it, and even less likely he used it, and it would be been a martially ineffective sword if he had, particularly considering he would have been facing pikes, halbards, katzbalgers and regular zweihanders which were much lighter and thus faster. Not only is it unlikely, but worse, there is no evidence supporting it. Only the claims of a museum which profits from the myth. Swords of comparable length were readily available and weighed 30% less at least. A heavy sword is not a better sword, even if you are large and strong. It is just a slower sword. You do not want to be both the largest, and slowest target on a battlefield. Further reading: The book by Jacobus Kok which reported on the two bearing swords in Leeuwarden is called "Vaderlandsch woordenboek 1791". There is no other reading available about this specific sword. It's a dishonest, tourist-trap myth upheld by the museum that profits from it. Hans-Peter Hils, "Meister Johann Liechtenauers Kunst des langen Schwertes", 1985 also discusses how many bearing swords are incorrectly classified as battle swords and have been since the 19th century.

[@IPostSwords]

Regarding heat treat/geometry etc, this is in reference to the rijksmuseum NG-NM-522 As can be seen, the guard is bent (indicating a poorly chosen material and poorly made guard), and the tang shoulders are wildly uneven. On blade geometry, there are photos of the "Grutte Pier" sword which show its blade sagging under its own weight, not exactly ideal and indicative of a geometry optimised for a long, broad blade rather than a good blade.h

[@LeozeraLindo]

glad you're here, i saw your post on reddit before skall made a video talking about giant swords in video games and i remember him saying that ''a sword that belonged to grutte pier'' and showed that image and i just flinched, was happy to see he corrected himself

[@ScottKenny1978]

Thanks for this!

[@ye4thorn]

Yeah, no way that sword could be used with one hand.

[@lithuaniaball]

Never trust someone who sounds personally insulted while they write a novella that could've been explained in a sentence

[@foreverjune8]

Experts: "Giant swords are silly!" History: "Oh, we love silly!"

[@RowinRhal]

Love your video, very informative. From someone with a SCA/foam fighting background I really enjoy your content. A few years ago I traveled to London for fun and explored any museums with armor or weapons. In the tower of London is a suite of armor for someone with gigantism, I'm 6,4 and it was built for someone much larger then me. I was also able to find Iron 2 handed swords used in battles and weighed over 30lbs, used for breaking/getting stuck in shields during an initial rush and smaller weapons were employed in close quarters combat.

[@Caderynwolf]

I always thought the wavy edged swords were a way to give a "wider/larger" blade while keeping down weight and material.

[@Warmaker01]

I remember while being temporarily in Japan, visiting some castles in Iwakuni and Hiroshima. One of them had in a display one of those huge ceremonial swords. Blew me away that something like that was commissioned to be made.

[@knowing1399]

Everyone knows that's a warriors coolness is indicative of their weapon size. Also it's funny to see that even in the far past the people also wanted bigger and better weapons haha.

[@MrRedsjack]

I was told that the zig zag blades on 2 handed swords were there mainly to avoid grabbing as the sharpe made it easier to cut someone's hand while pulling it back this making it harder for the enemy to block your blade by grabbing it.

[@Muppet_]

One of the oodachi displayed in the atsuta shrine were actually rumoured to be used by Makara Naotaka (真柄直隆) during the sengoku period, some records said that he lost to Honda Tadakatsu during the war of anegawa, who wielded one of the most famous spear in Japan called tonbogiri (蜻蛉切). After his death, somehow his swords ended up in the shrine.

[@kuronoch.1441]

Also take note that the sword, in 13:00, was on the lighter side of odachi weights. Typically, that kind of weight meant that it was a weapon meant for war, as typical odachi shrine offerings are on the heavier side.

[@LeoGnarleyardo]

I'm here because Shad kept name dropping you. Not disappointed AT ALL. Can't wait to binge all your content

[@andrewwestfall65]

There's actually a size cap on people. Some of the bigger people with gigantism are noted as having a tingling sensation in their hands and feet and have little sensitivity there because the nervous system isn't designed to go over 8 ft long. Not only is the Norimistus odachi too big for most people, it's literally too big for any person that could theoretically exist

[@zakazany1945]

Size cap on most mammals, actually. A blue whale may be big by design, however, it can take a couple of seconds to actually feel something touching their skin. Not only such person would have little sensitivity, but also would be very slow in overall reaction time.

[@ineednochannelyoutube5384]

@@zakazany1945 Depends. Different types of neurons have different consuctivity speeds. Gamma, the slowest, pain sensors are as slow as 40cm/s, whilst alpha motor neurons can go up to I believe 20m/s (this might be exaggerated, its been five years since I actually learned this).

[@mareksicinski3726]

well not a size cap it is just gigantism can lead to health issues, they'd need to be different in other ways too

[@zakazany1945]

@@ineednochannelyoutube5384 Take what I said with a grain of salt, I studied it 10+ years ago, so I may be dead wrong.

[@Dronom-]

Ajax was like 12 feet tall or something crazy

[@wrathsinful6389]

I've no proof, but I've heard of this 10ft guy named Goliath.

[@meganparrish807]

There are places in the world where you can find people as tall and taller than Goliath was. I've always had a suspicion the enormous swords we find were used by such people.

[@maddockemerson4603]

If Goliath actually existed - which is an _if,_ as the bible mixes real history and bogus mythology in the same breath - but if he was real, he would have been more like 6-7’ tall. The bible claims he was “four cubits and a span” which may just be words chosen to sound pretty, like describing a long distance as “a million miles”, or a long stretch of time as “forty days and forty nights”, but if meant to be his actual measurement, which I doubt, would make him 6’9”. And bronze-age metalworking wasn’t refined enough to make a big ol’ twohander anyway, even if somebody decided that was a good idea. Steel was rare and knowledge of how to forge it was basic, with the only known steel swords of that era being very much like their bronze colleagues, as bronze is too soft to support the long, thin blades of the late medieval style without bending and shearing under pressure or being made too heavy to wield efficiently. So no, Goliath, _if_ he existed, wasn’t that big, wouldn’t have been able to get an oversized greatsword, and wouldn’t do well with it if he did.

[@josephhuggins5394]

@@maddockemerson4603 giants did exist. they were called Nephilim. children of angels and humans. there are skeletons of them that have been found.

[@ScottKenny1978]

@@maddockemerson4603 6'9" isn't impossible for biblical times. Highly unlikely, yes. But one man in a nation? Sure, that's believable. Also, look at how much detail is given to Goliath's equipment. His sword is basically mentioned in passing, as in 'yes, he carried a sword', but his spear gets all the detail.

[@texasbeast239]

@@ScottKenny1978 - The Bible contradicts itself or at least trips over its own dick trying too hard to talk up its heroes when it says Dawviyd killed the giant Goljyath with such and such description in one book, and then turns around and says that Elkhanan killed the giant Goljyath, with the exact same description. So who really killed him? Were there then TWO giants named Goljyath? Some later redactor scribes attempted to cover this up by adding the phrase "Lakhmi brother of", so that Elkhanan killed Lakhmi brother of the giant Goljyath, with the exact same description. This then made at least two identical, named giants, and at least two named giant-slayers. I guess in the end, there can NOT be only one... en.m.wikipedia.org/wiki/Elhanan,_son_of_Jair

[@Diablo-sd3yd]

I love being awake at 3 am so that I can see videos like this, it not what I usually watch but I Hofmann enjoyed this

[@Victor-056]

The Odachi actually needed two people to unsheath and use. They actually did have use in battlefields beyond "Regal use". It's been catalogued that Oda Nobunaga used such a Sword in his Battles, with a Retainer taking the Sheath off it whenever he was going to start swinging. So frankly, a Samurai _With_ Gigantisim could use such massive swords... But they need someone else to help them remove the Sheath first.

[@HandOfThemis]

Skal said they used Odachi, but rather that these massive, 10 foot long Odachi weren't used. I don't believe for a second that a 4-6 foot tall man is going to swing that with any effectiveness, considering basic physics and all that lol.

[@Victor-056]

@@HandOfThemis I specifically stated that the Larger ones would _Need_ someone with Gigantism. The smaller ones still needed two people to unsheath it. (Oda Nobunaga didn't have Gigantisism.) Skall said that "Odachis were used more like Flags", which is rather wrong to say.

[@HandOfThemis]

@@Victor-056 Again, he was referring to these massive Odachi in terms of ceremonial or ritual use; this wouldn't be out of the question if the sword was considereda blessed artifact or gift. We see plenty of these types of inspirational items wheeled out to important battles. There is no way one person is swinging that around with any effect. A normal sized Odachi, sure. But those are already getting towards the end of practicality in terms of size and weight.

[@julienmack2409]

I wouldn't want to see a person who could figth with this thing imagen a 4 meter something warrior with such a sword just cleaving away the enemy's in front of him

[@muninrob]

At just under 2 meters (6'1") I can use a 4' blade freely, and a nodachi of up to 8' if I use techniques similar to those used with pole arms. For the ones that aren't wall-hangers, think of those oversized swords as something more like a short handled pole arm than a typical sword.

[@DemonPrinceofHell]

Like guts???

[@ScottKenny1978]

@@DemonPrinceofHell Guts had an advantage, when he was a child he always practiced with adult sized blades.

[@muninrob]

@@DemonPrinceofHell No, I'd never get his monstrosity off the ground, and if I did, that blade would swing me instead of the other way around. I'm talking the two handed swords you see in tapestries that are 1-3 heads "taller" than the user, and using actual naginata techniques with an 8 foot "sephiroth sword" wall hanger. (I was honestly surprised the tang didn't break on the 1st cut - that's a crazy amount of torque to put right behind the tsuba)

[@peterwall8191]

*Julien Mack* So you delegate a squad to take him down first. 4-5 guys with big shields blocking, the rest attacking him. You take that huge mother down..morale alone makes it worth it. The boost on you side and the consternation on the enemy. Big dudes are not good for pitched battles. Not in formation against formation. Now a runt...he has room to move.

[@strangeworldsunlimited712]

Another thing to consider is that the larger great swords, those ranging from 6 to 8 feet, might not be all that good against human opponents, but much better suited for mounted opponents. Particularly good for removing the legs of the horses being ridden into combat. Once you've dismounted a rider thus, you can switch to a more wieldly long-sword and attack them.

[@Ratmilker]

I just popped in to say I last watched Skalla many years ago, and it’s good to see that he’s just aged into Saruman

[@Pennywise12528]

Out of all the strange greatswords in fiction, I never would have thought the Loathsome Dung Eater's had a real life counterpart.

[@R0ckmans]

We should remember a particular thing about Japanese swords, the tachi-odachi type were intended for cavalry unit use, so the bigger size makes sense in that regard, although sure, even those aren't "Giant" swords, but at least there's a clear functional purpose for making a sword longer than the typical infantry counterpart.

[@plentyofpaper]

The dynamics of exceptionally large weapons are interesting. Intuitively, I don't think they'll work very well, but I ran into some more complex dynamics than I'm willing to draw a strong conclusion on. Double a weapons length, it's center of mass is now twice as far away. If you only double the weight, it's still got four times the amount of rotational inertia. To manuever this on par with a normal sword, you'd need to have 4 times the strength. I'm not actually sure how well that would translate for body size. Theoretically, a double height person would have 8x the muscle mass, (double height, width and depth.) Then there's the issue of weapon strength. Only doubling the weight would give you a very thin sword compared to the shorter counterpart, which would be much more fragile. At four times the weight, you've now got 8 times the necessary force, and by extension, stress on the weapon, with only four times the amount of material to carry that stress. This is a bit beyond the scope of what I'm comfortable analyzing, but I suspect to make a double length sword, you would need 8 times the amount of material to achieve equal strength, and as a result, it would take 16 times the strength to wield effectively. If that's correct (a big if) that would imply you're going to need to make some substantial compromises, even if you do have a double height person.

[@raimundasgriskaitis1140]

This is a kind of old video, but I think that some of these massive swords were made to show how skillful is the blacksmith. Imagine how much work went into making 3.8m long blade in XV century.

[@TheCompleteMental]

Swinging a sword large enough to be considered a show of power all by itself would be an impressive feat

[@johndododoe1411]

Could some of the temple donations be fully functional swords, made and sized to the mythical size of the deity as if a real person of that size had walked into the swordmakers shop? This would make perfect sense for a believer that prayed for the deity to appear and join the battle.

[@Sword_Cowboy]

They could also be used to demonstrate skill bc why would you donate something shitty to a god. Make it properly, the deity finds favor and other people see that you make pretty good swords it's a win win

[@HiragamaIkunai]

Some where made oversized for a single purpose on the battlefield ...killing horses. Others where for ceremonial, showing skill and because a samurai in question requested it ...many reasons.

[@Sword_Cowboy]

@@HiragamaIkunai this is directly mentioned in the video. This video is about swords that were almost explicitly not for combat horse chopping etc

[@everinghall8622]

@@HiragamaIkunai I thought you wanted to avoid killing horses in battle, as capturing them for your own use would be both highly profitable and save time raising and breeding horses fit for war

[@jakebrown9781]

I am totally adding that big odachi into a comic I'm writing, tnx for bringing it up!

[@SirConto]

When it comes to the Japanese odachis, he's kinda missing one of their main functions. Although some of the shorter ones do have katas on how to use them in combat against other melee weapons, their main function was to be used in one big cut at the legs of a charging horse, possibly keeping it somewhat concealed until it's too late for the horse to react. Or maybe just having it on the ground and then lifting it a bit when the horse goes by. If that's all you need it for, even 14.5kg is nothing that crazy. But I'm not too familiar with the specific examples he mentions; maybe those really are just ceremonial stuff and couldn't even be used in this way. All I'm saying is that their unwieldiness doesn't have to be that much of a factor. Don't know how well it'd fare structurally against a horse's leg though.

[@kuronoch.1441]

One is the longest nihontou, and the other is the longest nihontou that has a record of sufficient usage in war (Osafune Norimitsu ootachi also known as Kibitsumaru, and Taroutachi).

[@DMofDMs]

Swords take a significant amount of resources and effort to make. Seems like you'd want one that is versatile and effective, not the equivalent of a kitchen gadget like the slapchop. Now for some kind of ritual combat or executions? I could see that.

[@GinHindew110]

to cripple a horse's legs a chain or a metal pole are just as effective and wont have to be repaired after use

[@ArdentPardy]

When I was a kid my father acquired a swordfish sword and had a grip made for it out of solid brass. In the time that it existed in our house I occasionally would play with it and found that after about 5 or 10 years it was so brittle that I was afraid to touch it anymore.

[@SkyThePegasus]

I recently just ordered a Ludwig Holy Blade greatsword from the game Bloodborne that can change from a regular sword to a great sword and I’m really excited!

[@sypoth]

Most giant swords are either meant to be display pieces or as in the case of the Odachi a test of a smith's skills. The ones that saw combat had VERY niche rolls to fill that could also be done by pole arms and as it was difficult and time consuming to produce the metal and pound it into the appropriate shape most giant swords were eventually broken up/cut into pieces and used to make smaller swords. Like the Odachis which were often times turned into 3-5 Katanas, 5-7 Wakasashis, 12-16 Tantos (rough guess here) or any combo there of plus maybe a few Naginatas. It was just simply easier to take a chisel, slice an Odachis into thirds, and finish them into Katanas than it was to go out, correct the iron sand, smelt it until blooms, pound them into ingots, measure the ingots for hardness and durability, then pound them out into bars while working those bars into a better quality through a kneading process known as folding before pounding it into shape.

[@TheRealBot001]

"Which even has a nob on the pommel designed..." To end them rightly

[@williamturechek2911]

2 other things to consider: I also heard the theory that the Flamberge was there to to jar/rattle the opponent's arm as their blade made contact with the wavy part of the blade. Also in a similar vein, that the Flamberge blade also slowed down and degraded the strength of incoming cuts by breaking up the straight path of the cut. I'm simply adding a couple plausible, at least to me, reasons for going to the trouble to make Flamberge blades to add to the other reasons already mentioned here and elsewhere. These are just 2 that I hear far less Frequently in videos and other media on the topic.

[@captaindred342]

Thank you. I don't think it's just a theory. It's in old books on the topic. It's only a theory to modern people that disbelieve what the people of the time wrote down over and over again. It gave you a huge advantage over an opponent with a straight blade, as you explain nicely, as well as cutting deeper. I'm pretty sure the Germans got the idea from the Middle East, and then perfected it, rather than coming up with it on their own. The history of their wars and trade and who from the ancienter world they thought was the ish point in that direction.

[@RoboShaoran]

I do not know why u came up in my recommended, but I enjoy it. Your voice and passion is great, keep up the good work!

[@XboxClips219]

“A long sword is two to three hands” me who has two: 😳

[@NytanThePetLobsterEnthusiast]

I really love those videos, they are great to put on my second monitor while doing other stuff. That being said... have u ever thought about doing a history and weapon related podcast with other people in ur field like shad? I would love to listen to that. U have a great podcast voice xD

[@DJayPhresh]

I've heard that flamberge designs were effective because the waves made it so that there were less points of impact, and thus the force of said impact was more concentrated among the connecting waves, rather than spread out through the blade more evenly. No clue of the veracity of that, though.

[@NobleNemesis]

I mean sure, imagine several little saber slashes in a row

[@captin3149]

I've read somewhere that flamberge blades also caused your opponent a level of disconcertment from the 'feel' of the blade sliding down it, potentially throwing off their form. I can't remember where I read it, but do you think there's anything to that, or is it just more fanciful whimsy?

[@shadow50011]

I think most were just decorative and for ceremonies. They’re heavier, harder to sharpen, and more expensive.

[@Ranstone]

It has nearly twice the blade surface area. There's no way that doesn't change the physics behind the cut and bind.

[@pseudomonad]

It's plausible enough that an opponent who's coming up against a flamberge blade who's never fought one before might well at least find the possibility offputting. On the other hand, you could then make the same argument for *any* nonstandard blade, and yet we don't see loads of weird variations trying to be one-of-a-kind.

[@Agent719]

I believe i read this in a description from SCII, but it said the wave blade made it easier to slip passed a guard. That always made sense to me. If the sword bends away from where the parry or block is you could possibly land the blow anyway. But it also said it worked both ways. So... Just weird game mechanics or true facts? I dunno.

[@FloodExterminator]

I've read that the flamberge is shaped like that because sliding a another blade on it would cause lots of vibration on the opponent's sword and thus causing lots of discomfort

[@SonOfTegz]

I’ve held a real great sword from the later years of the medieval period in England. I was very surprised by how light it was, even though at the time it was about 3 times the size of me.

[@hamoen123]

so much stuff about the netherlands i did not know really awesome man keep up the great work!

[@whyjnot420]

Do you think some of these really massive swords might have a role in training, something like how baseball players will add weights to their bats?

[@whyjnot420]

​@Ozhika How would that differ from something like a boxer using machines and weights in order to get stronger? They are not practicing the actual moves they do in a fight, but are strengthening the muscles they use in a fight. I don't see it as a practical means of getting stronger, I was envisioning it more as a way of showing off while training. Like working out on a beach instead of some dark corner of a gym. Just to add: my initial question was more like playing devils advocate than truly suggesting that was the case. As is this question as well. But in both cases I was also asking the questions in earnest. Personally I think the more practical explanations work far better. But as the world is a complex place, I always try to look for additional or secondary explanations. At the very least, doing this allows me to learn more.

[@whyjnot420]

@Ozhika Thanks, that is some good food for thought. Also thanks for taking my question seriously enough to give a proper answer.

[@whyjnot420]

@Ozhika "Hard to find serious people on KZbin." Quite. But that is true for so many communities. Forums, IRC. Discord, comment sections for whatever blog or random website, _et cetera_ _ad infinitum_ Again, thanks. edit: typos _ad absurdum_