Let's Make a Direct Heat Smoker from Scratch | YesWelder

See detailed article: yeswelder.com/...
Joe ‪@harbaughsworkshop‬ shows us a DIY video of a step-by-step process on how to build your own smoker that uses directed heat to cook what you want to eat. If you love to cook outdoors, follow this video to get clear instructions and helpful tips to create a smoker that would impress all of your friends and family.
Join the YesWelder Channel Membership and unlock VIP perks and exclusive goodies! 🚀
Equipment Used：
YesWelder MP200: yeswelder.com/...
YesWelder CT2050: yeswelder.com/...
YesWelder .035 solid MIG welding wire: yeswelder.com/...
Outline
00:00 Introduction
00:20 Create the main body
02:16 Build the lid
03:21 Weld the bottom of the main box
03:55 Install and secure ceramic insulation
04:46 Weld the front door and attach hinges
05:56 Weld flat bar on the lid
07:53 Build a base
10:11 Work on cooking grate
11:37 Create a door latch
12:07 Install vents
14:06 Add a handle to the lid
15:05 Install dampers
15:28 Construct a slide system for side vents
16:00 Drill holes for vents and install a handle
17:31 Season the smoker
19:02 Enjoy the results
21:01 Prepare Materials
-------------------------------------------------------------
SUBSCRIBE to YesWelder on
Website: yeswelder.com/
KZbin: / @yeswelder
Instagram: / yeswelder
YesWelder Official Community: / yeswe. .
TikTok: / yeswelder
About YesWelder: YesWelder specializes in the design and manufacture of state-of-the-art welding machines, welding helmets, and accessories enjoyed by those with a passion for welding. Perfect for home and industry use, you can find YesWelder products globally and in the hands of people creating inspiring and durable work.
#yeswelder #howtoweld #weld #welding #diyprojects #welder #directheatsmoker #heatsmoker

[@mattro4902]

Enjoyed eatxhing the build. I wish there was someone around here that could teach me how to Weld. I'd go to school if someone offered a night class.

[@mattwaters6987]

Awesome build! Wow! Enjoy your masterpiece! 😊

[@caveman8756]

Nice!

[@brwhyon]

I cut my door 1" off the bottom of the inside and used 1" thick fire brick ( easy clean out ) for the bottom, lightened it up a bit and retains heat just as much, IMO. Nice build you have there.

[@heisenberg3868]

Yes baby

[@thesmokingplank]

Nice build. I used to be a fan of oaklahoma joes thermometers the last 6 I've gotten all read different in the same environment. I now spend the extra for the teltru.

[@harbaughsworkshop]

I agree with you, I will try out the teltru's. The Oklahoma Joe's were convenient just to run into Lowes and pick them up.

[@bodude4554]

Have you cooked any thing else on your cooker other than the pork belly which is awesome? Great build video spec dimensions would be nice to have

[@seanjustbeingsean]

Does anyone know how imprtant it is to insulate the bottom of these type of smokers?

[@johnmayberry9800]

What was the materials cost for the build?

[@cbrookze]

Have you tried your reverse flow option on any cooks yet and if yes how were the results?

[@huxmetalworks7371]

Hi im new here I love your work i world like to build one of these i have a question did you have plans or can you possibly provide maybe a measure drawing i would be willing to purchase them if at all possible i could just wing it but i would like to have the details right your video is great i thank you for sharing your experience

[@diegxtr602]

How many inches did you cut for the front portion for the LID Or Lip

[@steelworkers78]

good

[@zachary9009]

Damn good looking rig.

[@kaydenschackmann7904]

What would you recommend for the best chop saw blades.

[@harbaughsworkshop]

Depends on your chop saw. If your saws rpms are too high you have to stick with the abrasive disc's. I have a Wen chop saw and their metal blade works really well. Evolution puts out really good products as well. If your rpms are to high the metal blades will burn out after a couple of cuts.

[@gford1491]

Where do ya get those fancy holder/ magnets from

[@harbaughsworkshop]

Do a search for heavy-duty magnetic v-pads.

[@gford1491]

@@harbaughsworkshop 👍

[@caferacerbuild988]

Not to be a hater. But this is a straight up copy of someone alott more well known. And for a welding channel... what's with the welds.. I get you are american but did the person in the video ever do a class on welding. Eg laying full welds in one spot. Dragging a gas weld.. like come on and at 5:13 yea I get it if ya can't well ya grind but I can see about 20 holes and that's on the video not in person. Talk about amateur hour.

[@lonewolf9390]

Let's see your smoker build, Scooter.......

[@aneurysdelosangeles]

Im a new subscriber's from Lawrence Massachusetts God bless all of us amen 🙏🇩🇴🇩🇴🇩🇴🙏🇩🇴🇩🇴🇩🇴🙏🇩🇴🇩🇴🇩🇴🙏🇩🇴🙏🇩🇴🙏🇩🇴🇩🇴🙏🙏🙏🙏🤝🤝🤝❤️🇩🇴🙏🇩🇴🙏🇩🇴🙏🙏🤝 0:13