YGE Mikado OEM Programming

[@Futurase1]

Fredrik, You can not leave the end points at +100 -100 if you use Spektrum. Mine nor two friends will work correctly there. Both require very slight adjustments for the low end end point to be correct and +100 will not give 100% throttle. A slight adjustment has to be made as well there. Friend has Sbus and it works fine at +100 -100, but it will not with Spektrum bound in DSMX 11ms.

[@Helieyecom]

Thank you Mr. Mel ! great job!! logo 700 is different gear ratio right?

[@FredrikMelin72]

Exactly, The TX calibration and Governor endpoints have a "symbosis" relationship In such cases you can lower the radio endpoints a point and two In other words, if Governor is 100/100 and your radio is 99.5/99.5 (i.e. not all the way) its the RADIO that rules.

[@Helieyecom]

It depend on calibration of Tx. some spektrum tx is not correct 100 -100. Maybe you need buffer for low side like -102 in governor 2 page.

[@jaydeeemtuner]

Awesome video made my setup easy

[@Helieyecom]

Which is better way that change governor 2page low limit or chage tx radio endpoit? Thank you master!

[@pkzmc]

Hello Mr Mels! I have this ESC and I would like to use it in a Goblin 770. Will it work if a fill the proper data in the Vbar setup? Thanks in advance! Cheers from Brazil..

[@Helieyecom]

very good info. Thank you very much.

[@FredrikMelin72]

Result is the same, does not matter really but I always make my TX calibration to -101 instead of -100 then it's "always a little more than needed" = always works.

[@Helieyecom]

Thank you !

[@FredrikMelin72]

Yes, Logo 700 is 10.29