【HOW TO: Live2d】Eyes Tutorial #2 - Physics + Copy & Flip the other eye - YoshinoArt

[@KagedBird]

For those watching this video and not understanding why your other eye might not be blinking, remember to go back to Modeling drop down > Parameters > Blink and add your new eye variant (open and smile!). I was about ready to pull my hair out until I remembered LMAO. Hope this saves someone some stress.

[@rulie]

THANK YOU SO MUCH OMGGG i couldnt figure out wtf was wrong ur a blessing 😭😭

[@PorcBun]

Thank you for this comment!!!! I'm a complete nub and was completely lost when it didn't work >.

[@alicechow3208]

Thank you!!!

[@jf8084]

DUUUUUUDE LOL I was about to cry for real, Thank you! But now my eye is kindof blinking, but half way type of thing lol.

[@mothsilkz]

omg thank you so much

[@yozoramako]

Finally somebody who's doing tutorials and are not purposely being vague on rigging advice. I'll give you a sub just because and it looks like you have some good content overall. Thank you for this.

[@YoshinoArt]

Thank you so much! Yeah I can see that many are jealous of their technique 😅 As soon as my PC is fixed I'll make more tutorials 💕

[@rulie]

You are seriously an angel 😭 your model is beautiful, your voice is calming, and your tutorials are probs the best I’ve seen so far :O tysm!!

[@YoshinoArt]

And you are too sweet 😭 ❤️

[@zellasteria]

nah this comment is straight facts frfr 😭😭

[@CariMeow]

omg... you make evertyhing easy... I just did it I give up with live2d... but now i feel inspired

[@otterpoppin]

Thank you for going over Live2D in such detail. It's been really hard for me to learn and so many riggers are purposefully vague, seemingly to keep commission demand high LOL. I can't afford to pay for a model/rig so I've had to do everything myself, and your videos are amazing for learning! You've earned my sub. :)

[@KubiParfait]

Thank you so much for your guides! I'm starting off with the free trial version right now, so I had to skip the physics as I am limited on my Deformers and parameters. BUT I was able to follow along with everything else and I'm so happy! Slowly will be going over your other videos to keep going! Thanks again!

[@krysin]

Thankyou!!! I tried to follow some other guides before coming to yours but would always get lost and found people moved to fast, you go at the perfect pace and make sure we dont miss where your clicking etc. Thanks to you i've just finished my first set of eyes and im in love

[@GlocktheOPS]

THANK YOU SO SO MUCH! THE RESULTS ARE IMMACULATE1 This is one of the best tutorials you are very very patient and made sure to show all the footage not many people do that so thank you very much!

[@raddles]

These tutorials are life savers. THANK YOU! You're wonderful 💜

[@Toxickitty10]

i can not express how thankful I am for your tutorials. you've made this program so easy to understand and showed how to do some really cool effects. ty so much

[@serenvtuber]

You have been of great help as I make my own model! I'll be sure to bring you up anytime someone asks me how I learned to rig! Thank you so much!

[@YoshinoArt]

Good job Snekie! Remember that after Christmas I'll be back at streaming at twitch.tv/yoshinoart so you can watch the live2d process!

[@auroraghost6462]

Thank you so much. ♥ After 3 nights I got my eyes completely rigged with your tutorials!

[@Minahanachi]

I am writing from Turkey, your videos are very helpful, it started without knowing anything and it is very easy thanks to you, you teach very well yoshino-senseii :3

[@Marburg-chan]

28:26, if you put the meshes inside a warp deformer and move said deformer, you can re position the meshes without having to mess with each keyframe.

[@YoshinoArt]

Thanks for the tip! Now that you say it... It sounds so obvious! 😖💖

[@Marburg-chan]

@@YoshinoArt np :3

[@AikoFujiwara]

This tip saved my butt, thank you!

[@CilesteAndSheyn]

my model is uneven so the copy-pasting of movements isn't exactly helpful, but this series is way more helpful than the other videos I've seen that only tackle basics! Much platonic love! 💜💛

[@hanayoo1582]

This deserves so much more love, this tutorials are amazingggg. Thank you yoshinooo 🥰🥰

[@NikkiDraven]

Thank you so much! You’re helping me so much, it’s my first time rigging and you make it look already semi-professional

[@activemotionpictures]

32: Thank you for sharing the wiggle parameters. Great video!

[@junezchan]

Thank you for such a detailed explanation and useful advice! If I may ask, your art’s edges are looking really realllly smooth, I was wondering how big do you setup your canvas? Thank you again!

[@YoshinoArt]

Hewo! I usually use 4000x8000 canvas But in general I advice you never go below 2000 px because that is more or less the screen size!

[@rindo9405]

I like ur glasses, I dont think I will ever become a vtuber but its interesting to watch :)) Stay safe

[@Saywumi]

I LOVE YOUU, TYSM! I've been doing rigging for a long time, but I never went to the advanced part.. You helped me a lot!

[@pink_atelier38]

Thank you so much for your tutorials! They're really detailed without being information overlaod! Your instructions are really easy to follow as well~

[@YoshinoArt]

You're welcome!

[@mikuboy5151]

ur videos are honestly amazing and ive been binging them all, but i do have one question, when i copy and paste the eye and reflect it, it doesnt go right on the other eye, its like to the side, and when i try to fix it, it messes things up. how would i be able to fix this

[@SurrealNirvana]

27:37 I was so confused but it turns out when you copy paste like this now days it creates a deformer thing at the top you need to delete. Otherwise it does not move to the other eye when you refelct.

[@tine6210]

These are so in depth, helpful, and gorgeous! Thank you for sharing!

[@YoshinoArt]

You're welcome!

[@celynwynn]

I'm so happy you've posted this one now 🤣 cause I just finished doing the eyes today ready for the physics

[@YoshinoArt]

Uwa I had a good timing for one time 😂😂 GL on your work!

[@celynwynn]

@@YoshinoArt yes you did hahah

[@anfelly_art]

It’s the best tutorial I’ve ever seen, thank you so much!!!!!!!! You explain like a god

[@YoshinoArt]

You're welcome! Head XY in the making ❤️

[@kittyqueentengu5327]

thank you so much, it was very easy to follow along and now my eyes are all nice and bouncy :) also made the ears go slightly down when the eyes are close

[@blue.6393]

Finally a tutorial where the explanations make sense to me!! Most vtuber artists who make these are good at Live2D but not the best at teaching and explaining Your explanations make so much more sense thank you (T^T) working on these with me and my friend

[@elenameister2544]

Hello I enjoy your tutorial but as the preset in 6:39 can we leave the physic model preset blank? A tutorial would be great to understand cuz as a visual learner it's confusing not knowing where to make one. It would help thank you!

[@OwnyOne]

You make it look so easy when just the most little tiny thing can make everything go wrong lol

[@fumikokoyaa3315]

Thanks so much! I have followed the first part of your tutorial and I'm so happy finally someone covered this topic and showed us how to do this. Your tutorials are very easy to follow and understand, I've subscribed to your channel, cause I love your content as well. May I ask would you do more tutorials in the future? :o

[@YoshinoArt]

Heyo

[@fumikokoyaa3315]

@@YoshinoArt Yeah I really did! I'm looking forward following your other tutorials for my upcoming model :) I'll give credit of course ^^

[@FaneMartikov]

Good day Yoshine, I want to thank you so much for this video. I helped me start rigging my own model

[@ornelladallarth7400]

I am so thankful for this video, you can'T imagine! so great explained and really beautiful blink! THANK YOU! I want to ask maybe someone knows, why my model at the end is suddenly not blinking till the end? It is blinking onliy till 0.2, so means it doesn't close completely.. I can do it manually, but when it auto run, it doesn'T work..

[@blissful0]

hii, i have a lil problem! after completing everything i realised in the left eye, one highlight doesnt move the same as the other in terms of looking x and y. im not sure how to fix this as ive tried to delete the new parameter and redo it (30:47 this step!) and it wont change the parameter?

[@VeseniaDesigns]

100% life saver! Thank you so much!

[@xmosskin]

thank you so much !! my models are eyes are so shiny and animated

[@LiliacHaven]

29:43 This tutorial is Lovely! But as I was following it at this part I don't have the option to replicate parameters. Is this only a pro Live2D option?

[@YoshinoArt]

Is your Live2d updated? Older versions didnt have that feature

[@LiliacHaven]

@@YoshinoArt Ahh! I just checked and it isn't updated. Tysm for replying so fast! This tutorial was very useful!

[@Arekuch]

Thank you!

[@michellevue697]

Thank you for making these awesome videos! your tutorials help me so much!

[@YoshinoArt]

You're welcome ♥

[@MCRobin912]

When I copy and paste my eye, it doesnt go to where my other eye is originally placed. It's reflects to the middle of the face and I'm not sure if Live2d will allow me to move it. Any advice?

[@YoshinoArt]

Just create a temporary Deformer, place it where it should go and then go at modeling > deformer > delete deformer and pass to child component

[@死雪シェリア]

hi :D the tutorial really helps me a lot ive been finding videos about live 2d steps for forever. However, i’m at the part about reflecting the eyes and i’m having a problem because my model has different eyes colour, do you have a way to keep the deformers but change the eyeball by any chance D:?

[@YoshinoArt]

yea sure! just drag drop the 2nd iris inside of your reflected eye and delete the 1st copy pasted one

[@fudgeymoss]

thank you for your amazing videos, they've helped me so much!!! though sometimes live2d makes me sad, a lot of my reflects havent worked during the rigging process and now the eye copy paste and flip didnt work, so I am having to try and do everything all over again for the other one ;-;

[@kc_exe1632]

Hi, I have a small problem. The right eye is duplicated from the left eye and it works perfectly in the physics but in the cubism viewer the right eye doesn't blink and i dont know the cause of it or what went wrong. :( I also checked off the eye blinking settings for it and seperated all of the parameters.

[@butter2225]

Hello, your tutorials are amazing but right now I’m having a little bit of difficulty when I clicked reflect it did not go to the other side of the face. It stayed on the other side it just turned could you tell me what I did wrong please anybody?

[@maidframe]

Is there a way to copy the attributes over to the second eye? I have a character with two different eye styles - the left one is robotic whilst the right one is organic.

[@Menhera_Clown]

I'm saving this playlist for when I can start making a model

[@YoshinoArt]

Thanks for your support!!

[@uchicken_]

My model dosent do automatic blinking in the psychics editor what do I do ?

[@YoshinoArt]

You need to go on the parameters setting (click on the three dashes on top of the parameters, like this "=" but with 3 lines And click "settings for lip sync and eye blink" from there checkmark your eyes parameters ^_^

[@Reliate]

Hi, For some reason, even though ive done parameters and everything correct, when i go into ''Physics/Scene Blending Settings'', copy everything you have, it doesn't show the Lash wiggle. It only shows the eye blinking. How do i fix it? I've already tried messing with settings but to no avail. :(

[@YoshinoArt]

Did you change to the left corresponding parameters both input and output?

[@Reliate]

@@YoshinoArt Oh my goodness i messed up the input, thank you so much for the quick response !!

[@robinskyemckenzie5448]

Okay, so, I know I'm late here, but I hope you can help. No matter what I do, the eye shines won't wiggle in the physics preview! I even used your exact numbers.

[@violetfantasy2537]

Can we have a head turn/had angles tutorial? One that shows how to make everything move with the head?

[@ttamakiii]

I've got a weird issue with my eyes. All the physics and blinking perfectly fine in live2d, but when I export it to vtube studio, the normal eye (the one that I didn't copy, paste and flip) works weirdly. The eyelashes, all the physics and blinking on that eye work but the pupil doesn't move. It's so weird. I've tried alot of things to fix it but nothing works? Does anyone have a solution to this?

[@yukashiisonline]

I have an issue.. When I go into the Model Physic section the Eye doesn't blink itself.. How do I fix this?

[@andy-dh2sd]

my eye isnt flipping to the other side and is only flipping on top of the eye i already rigged, what do i do?

[@nightkitty582]

question like for the pandelum part the pendelum keep going to ward the normal eye so i cant see it close, all i see is its trying to open its eyes for a quick second. can someone tell me y?

[@Sakurablooms965]

I reflected the eye but the irises are going opposite directions when I test them out! Help ;_;

[@YoshinoArt]

Hello! Just click on Iris L XY deformer and then right click on the number of Eyeball X parameter and hit "Reflect" ^_^ So it's gonna reflect the movement of the eyeball. Then you can do the same thing for the lights and it should be fixed!

[@Sakurablooms965]

@@YoshinoArt you’re a lifesaver! Thanks so much!

[@YoshinoArt]

@@Sakurablooms965 you're welcome Sneky 💖

[@weirdokate8840]

This was super helpful, thank you so much! I followed ur instructions on the third model i ever made and it looks so much more bouncy and i have a better feel for the physics now

[@YoshinoArt]

The red dot in the physics? Have you set up the input effectiveness to 100? also make sure that your Mini Lash wiggle parameter is ranged from -1 to 1, if it's for example from -30 to 30, change the physics scale to 30 ^_^

[@weirdokate8840]

@@YoshinoArt Thanks for the quick response, everything is set exactly like t hat, effectiveness 100, range is -1 to 1 and physics set to 1. Edit: I overlooked the fact that the output was set to the Lash Wiggle and not the Mini Lash Wiggle, i'm so sorry

[@craftyhousecat7001]

my copied eye works in physics/scene preview but once I export it, it doesn't work. sigh

[@mr.lovely58]

How do you make the jiggly eye physics show up in Vtube Studio? I make them in Live2D and they work in model/physics tab in Live2D but when I open the model in Vtube studio there’s no jiggly physics. The eyes still open and close and everything but no jiggly 😢. Please help me!

[@Pyxocy]

Hi! I followed everything step by step, however the flipping part is going wrong :(( When I flip I am unable to move the elements (even with the red box there) + when i try to manually move them piece by piece it just slides back using the parameters, could you please help?

[@YoshinoArt]

You cant move them piece by piece, you need to put everything in a new temporary deformer and use that to move everything Once youre done do modeling >deformer >delete and pass to child components

[@Pyxocy]

@@YoshinoArt ooh alright! thank you so much!

[@Jackpro2010akadolboeb]

I'm don't have "lashes" in physics panel,what to do😰😰😰

[@rinchanx445]

I have a question. Why my reflection is not symmetrical? When I reflected my left eye it appeared like a few santimeters left from main right eye.

[@mofb.5891]

Idk

[@jurika5572]

Omg sooo many helpful things!! Thank you so much!

[@YoshinoArt]

You're welcome! Next week imma post eyebrows too!

[@Froshe]

how would i copy and paste if my model has heterochromia

[@mrbulldops2654]

For this to work in vtube studio, would you need to change the parameter ID ? I know my mouth wasnt moving since the parameter was not named according to L2Ds ID naming list.

[@YoshinoArt]

Make sure that your left Eye open ID isnt EyeROpen2 It must be EyeLOpen Same for smile! 🫶

[@18taiga]

I really love your turorial and Im also almost done with my character but im stuck with "replicate parameter:" as i do not have that option.. im using live2d ver 4.0 please help :

[@YoshinoArt]

Updating to the most recent version should.make it work

[@SkyShy]

My model have different colors eyes does that mean I have to re do everything again with the eye. Or is there a way to just copy the old eye skill to the other eye

[@YoshinoArt]

Hello! You can copy-paste the eye just as I do in the video, but then grab the old iris (the different color) and drag drop it in the deformer of the rigged copy pasted eye. (Basically switch it with the copy pasted iris, which has the wrong color) Now you only have to remake the mesh and rig the iris and pupil for the parallax effect. But the squish and everything else will be working without everything to remake them!

[@SkyShy]

@@YoshinoArt thank you so much. I don't know how but I also copy the mesh and just flipped it as well!. Everything is working great. Thank you so much for the help

[@colourfulchaos9607]

Quick question. Would it make a huge difference if I do not have any Physics model presets like you do?

[@kebdo3387]

Hey thank u for this 😭😭❤️

[@YoshinoArt]

You're welcome ❗🤗

[@brasasdekentaro6732]

What if My model has heterochromia? How do i make or copy the same parameters for the other eye?

[@YoshinoArt]

Just follow the tutorial but then drag and drop the different iris where the copy-pasted one is ^_^

[@arahabaki9325]

Yoshino, great tutorial so far with the two tutorials I'm in!! Quick question: I'm having troubles regarding the eye light bounce. You said that having a parameter active might affect the lights from moving around and it does. How can I disable them since they also move when the model blinks and smiles?

[@YoshinoArt]

Just make different deformers for different parameters ^_^ this way the movements don't conflict

[@arahabaki9325]

@@YoshinoArt Thank you so much, that actually worked!

[@Bok_Hokulani]

I have a question, Im working on a model that has a slightly different iris design then their right eye. Will i have to re-rig the left eye or does copying and pasting still work?

[@nicejob6632]

hi yoshino !! i am grateful for your tutorials. im sorry to ask but can you help me with this one issue? i added the 1.0 keyform to the "eyeR open" parameter so that my vtuber can have wide shocked eyes and set default to 0.8, but in the physics/modelling window, everytime my model blinks it opens its eyes really wide and doesnt blink normally (-1 to 0.8) Would you happen to know why? If not, that's okay! I am really thankful for your content. Have a good day!

[@YoshinoArt]

Hello! This was a bug in older versions, updating Live 2d should work ^_^

[@nicejob6632]

@@YoshinoArt thank you so much queen!! have a marvelous day

[@kariku1838]

Thank you so much for the detailed explanations!! It helps a lot! I have got an issue, though, that I hope you can help. I did the copy paste of the EyeR and EyebrowR so they work in symmetry with EyeL and EyebrowL. When working on the texture atlas, the "copies" of the eye and eyebrow dont appear in the texture atlas, even though they have meshes. I was wondering if you know how to fix that! Thank you again for your time!💫

[@YoshinoArt]

You don't need two meshes in the texture ^_^ actually copypasying identical meshes is good so you save space in the texture!

[@kariku1838]

@@YoshinoArt Oooh awesome! Thank you so much!

[@msproject4902]

26:52 this is what i'm looking for

[@igotinspired8499]

Спасибо

[@godessbyhearts]

Hello! Can you help me on this? After copying and pasting the other eye, I had the rename everything from “R” to “L”. I continue on creating new parameters for the mouth and for the head angles. However for some reason, the physics windows glitches. I checked my texture atlas and my “new” eye does have an art mesh, so it’s not a complete image on my texture atlas. Do you have an idea to fix this? Thank you so much for this tutorial already!

[@godessbyhearts]

*doesn’t have an art mesh*

[@YoshinoArt]

Hello! Usually when you copy paste elements, they still share the same mesh in the texture file, but it should work anyways after you export it ^_^ this also makes the model lighter

[@godessbyhearts]

@@YoshinoArt hello thank you so much! For your help. I see it. One last question that occurred to me. When doing the head angles. I made the mistake of not making a “Eye position L” after my eye warp. And now my eye position is apart of the angles for the head and for the eyeballs. Do you have any way of fixing it?

[@YoshinoArt]

@@godessbyhearts I'd suggest first of all reset to default parameters, then select your eye and remove the movement from the head XY and redo it on the new paramenter :/ When you make those kind of mistakes it's better to restart it, instead of spending a lot of time trying to fix but you end up messing up even more

[@godessbyhearts]

@@YoshinoArt Okay! Will do. Thank you again for the help!

[@averageocpxrnsfw7890]

Hello! I followed your tutorial since part #1, however I have a problem. When I went to start the Lights Wiggle, the mesh is active on the Eyes XY parameters and I don't know what to do. Same goes for the Iris. When I made a deformer, I was able to put the keyframes, but you said to work on the mesh. Did I do something wrong? ;3;

[@YoshinoArt]

For the lights wiggle you have to create a deformer called Lights wiggle ^_^ that way It won't interfere with the mesh and the eyeball xy

[@averageocpxrnsfw7890]

@@YoshinoArt tysm !!! 🥺

[@AKB_Umagarich01]

I am in love with this part of the tutorial right along with the recent one, the movements are kawaii-tastic and the details are absolutely incredible and you definitely deserve a lot of respect for that-Kyu🤩🤩🤩🤩🤩🤩😊😊😊😊😊😊😊👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻…However there is one question that I would like to ask you, at around 18:49 could you please remind me of what you clicked on there?

[@Kokopoofs]

this tutorial was wonderful, thank you so much for sharing this information! one question though. when i have it show random animations (specifically random poses), the eyes (when open) always stay at 1.0 even though i have the default as 0.8 :((( is this just the case for animations and will it be fine when i export???

[@YoshinoArt]

It will be fine! Its just a bug ^_^ if you update to version 4.2 you shouldnt even have the problem anymore

[@Kokopoofs]

@@YoshinoArt thank you so much!!!

[@kittokittie]

I love your tutorials! They help so much!

[@YoshinoArt]

I have iphone tracking ; _ ; it's the best option existing for tracking right now basically, since the newest apple devices have the TrueDepth technology

[@itsuhangela2745]

I'm a little confused, when I set the x and y axis it worked but when I started making the blinking on eye L, the eyes x and y moment stops at certain points if the blinking

[@YoshinoArt]

The Eyeball X and Y movements should be on different deformers than the one using for blinking! Look carefully how i have no items active on both Eyeball and EyeClose at the same time

[@NightaChan]

Hi! How do I add presets into physics like you? I'm currently working with the default ones, and they aren't enough. :')

[@alexiskante2218]

So first of all, amazing tutorial, thank you so much! I tried to follow it as closely as I could, and I was happy with the result, but after importing everything to VTube Studio, the eye physics became weird - there is a short delay. The avatar blinks, but the physics start only after the eyes open again, so it looks strange. I wonder what may be the cause? Because it works perfectly in Live 2D.

[@YoshinoArt]

Sometimes the physics do change when imported in VTS :( try to change VTS physics to 30 fps

[@alexiskante2218]

​@@YoshinoArt Thank you for the tip! Unfortunately, changing the fps didn't help, but I managed to solve it by a workaround - I have realized the delay appears only if the strength of the physics is set to more than 50%, but that meant the other physics were nearly non existent. So in Live2D, I doubled the scale of everything except the eye physics and voilà, it worked!

[@rinakurirose]

Hello Yoshino! I followed your tutorial and the eyes are moving fantastically, now the only issue I currently have is that my model has odd colored eyes and when I try to drag-drop the other color and erase the copied one the new color does not show at all, can you explain in detail how to do this I'm kind of confused. Thanks so much for this life saving tutorial!

[@YoshinoArt]

Make sure your eye didn't drop into a hidden folder!

[@mofb.5891]

How can I adjust phisics model present?

[@KoshiAnnie]

Hello Yoshino. love ur tutorials! one question tho. i dont have the option "Replicate parameters" on mine. is that normal? ive tried many ways but nothing worked

[@18taiga]

i have the same problem :(

[@arasfluffypancake2409]

your video is really helping me!! thankyou sooo much !!!

[@YoshinoArt]

You're welcome ♥ Thanks to you for supporting my content!

[@circkee]

Hi! Thank you for the tutorial its very brilliant!! I was trying to flip the eye but for some reason the reflect option doesn't pop up. I'm not sure If I made a mistake with the deformers or not and I'll probably just restart it, but I wanted to know if it was a simple fix before I do. Thank you again

[@YoshinoArt]

Did you select the elements to reflect, before trying to select?

[@honeypinqq]

Tysm for the tutorial!! The only problem I have is how to make the iris move in the same direction, mine moves opposite to each other. Oh and when I tried separating the right eye smile parameter to the left eye smile parameter, the keyframes wont appear on the left. So with the other parameters. Is there something I did wrong?

[@YoshinoArt]

Did you select all of your new eye's elements? Otherwise it's not gonna work! First you select and then you do the change For the eye moving to the wrong side, select your Iris XY deformer and right click the number on the right of "Eyeball X" Then hit reflect ^_^

[@honeypinqq]

@@YoshinoArt Ohh i see! tysm!!!!

[@jerome15hikki]

Love your tutorial. How can I adjust the blinking speed of my eye btw?

[@YoshinoArt]

That can't be done ^_^ but it's not really a problem since when exported the model will simply follow your eye movement

[@kohakuhime7887]

These tutorials have been super helpful! But I've ran into an issue where when I reflect my rigged eye it doesn't flip over to the other side? It just... reflects in place and doesn't let me move it over. Does anyone have an idea of where I went wrong?

[@YoshinoArt]

You can put it in a temporary deformer and then use that to move the eye to the other side Then go to edit > deformer > delete deformer and pass to it's child components

[@kohakuhime7887]

@@YoshinoArt It worked!! Thank you so much!!!

[@ahhhhsavenya482]

Thanks so much for the tutorial my eyes look amazing so far!! one problem i have is that the parameters arent showing up when i need to change the parameter for the left eye, any idea on how to make it show up?

[@YoshinoArt]

Hello! You can create the parameters by yourself! If you already have your EyeR parameters tho, it's even easier: just right click on the EyeR parameter and click Replicate parameter Then right click on your new parameter and click edit parameter, now change the name and ID accordingly

[@ahhhhsavenya482]

@@YoshinoArt thankyou!!

[@canhedotricks6078]

Help I have conflicts how do I fix?

[@mofb.5891]

How can i tweaking the phisics model present?

[@jonathansuwandi9417]

Do I need a newest version of Live2D so I can do the preset part? My version is 4.0.0

[@YoshinoArt]

presets are old savings i grabbed from models in the past ^_^ the first time you have to do it by hand, copying the numbers. Then on next rigs you can use your old savings

[@ya-kiri794]

Hello Yoshino, I am currently rigging a Live2D model and your tutorials have been very helpful. I followed the video however, I think I did something wrong. In VTubeStudio, when I wink with my right eye my left eye winks instead and vice versa. What should I do?

[@YoshinoArt]

Go in VTS parameters, find EyeROpen and click on the input and change it to EyeL, then do the same for the other eye ^_^

[@ya-kiri794]

@@YoshinoArt THANK YOU😭🙏I did what you said and now its completely normal now. Thank you!

[@reichi4042]

I have a question, when i open physics/blending settings, the model is really pixelated and low resolution. Is there any way to make it clear and detailed?😭😭😭

[@YoshinoArt]

I had another time that someone presented me this problem and apparently it happens for GPU-less PCs :/ but if that is not your case, maybe try to change the fps or save the file with another name

[@reichi4042]

@@YoshinoArt alright! thank you so much!!

[@danikaclark7297]

Out of all the tutorials I've looked at yours is the best by far in my opinion, than you so much for being so informative! I have a question though ^^; Ive got the eye flipped, both are blinking and both have physics... but the physics of the flipped eye is blinking weirdly? The deformer is mirrored, all the parameters in the physics window are good, the parameters in the parameter tool box are set up.. but when she blinks its like a ripple from the other eye so it looks like her eyes are doing a mexican wave instead. The only thing I can think of is in the physics window, the red dots for Lash Wiggle R and Lash Wiggle L go in the opposite direction to eachother when she blinks. Do you know what I may have done and how to potentially fix it? ^o^;

[@YoshinoArt]

Try to select your deformer, then right click on the number beside the parameter and click reflect! that might fix it

[@danikaclark7297]

@@YoshinoArt It helped a little, but there's still too much bounce in one eye and the red dots are still going in the opposite direction. I'll try to follow it all from scratch again. Something might have been mixed up along the way. ^^;

[@danikaclark7297]

Turns out I had missed a step and didnt create the lash wiggle deformer, I was using the Lashes deformer instead. No wonder I had issues! Thank you so much for responding though, you're an absolute gem

[@YoshinoArt]

@@danikaclark7297 good thing you solved!! Amazing job

[@lalawuzhere3715]

what about models with two different colored eye for the copy and flip portion

[@YoshinoArt]

Hello! You can simply follow the process in the video but then switch the Iris with the other color.. you will have to re-rig the iris in the Eyeball X and Eyeball Y, but it's quite fast, and everything else will work automatically ^_^