Instead of welding that diff, assuming this is to be a street truck, I would put a Truetrac limited slip in there. That's what I did to my '92 and it's awesome.
@donigor95492 жыл бұрын
Austin, trust me, watching your videos is one of the best moments of the day. I would like to congratulate you on your perfect job and edition of your videos. I have a channel where I restore old toys (Nylint trucks from the 60s) and I know how complicated is to filming without forgetting the key moments which make all difference. One more time, thanks for sharing, your job is awesome!
@austinniemela2 жыл бұрын
Thank you!! Yes working and filming can be a bit tricky from time to time that's for sure!!
@br7156 ай бұрын
Great job Austin, others may take notice. This is a great example of concise tutorial within a great shop environment without a lot of gibber jabber. Very thorough and above and beyond normal rebuild. I was just looking for a good representation of disassembly/assembly order for this subject of rear axle teardown and reassembly. As I am in process now on stepsons' 87 toyota pickup rear axle bearing and seals replacement. I am 40 year Aircraft tech, car and motorcycle enthusiast, mechanic.
@Tburnette602 жыл бұрын
So glad I found this chanel recently. Started with the transformation vids of the green and red truck and was amazed by his skill, and now i've watched every episode of this new build. Love chanels like this where you can actually learn, and be inspired to take on projects on our own trucks.
@austinniemela2 жыл бұрын
Welcome to the channel!! Im glad you are enjoying it!!
@ronthompson23662 жыл бұрын
Again and as always. Another great video and enough to keep me / us looking forward to seeing what's next. I know you already see a finished product. The world is also eager to see a finished product.... that's what makes your videos good.
@joshuaa19212 жыл бұрын
This is so badass, wish I was 10 years older and already had a shop, lift etc to do this to my 91 Toyo Pickup 4x4. Great job man 👍
@nazoe832 жыл бұрын
*Setiap videomu bisa dinikmati penonton, karena proses yang rinci dari pembongkaran, seni dalam pengelasan, pengecatan warna, sampai perakitan sangat memuaskan.* 👌 *PERTAHANKAN !*
@ابويزيدالوايلي2 жыл бұрын
عمل رائع متقن بدقة عالية وبيئة عمل فاخرة.
@CrisParada2 жыл бұрын
Hell yeah man, i’ve learned how to rebuild an axle from you with the green pickup! And it doesn’t stop me from watching any of your videos! Thanks for the great content! 🔥
@austinniemela2 жыл бұрын
That is awesome! Thank you!!
@scubbarookie Жыл бұрын
Thank you Austin, for taking the time to show us some video clips of this rear axle transformation. Great job!
@paulmartin33402 жыл бұрын
I know Australia is a long way from you but if you check hand brake cable kit for your hilux it should be available via Australia! Love the builds you do. Cheers from Sydney Australia MATE 🇭🇲👍🦘🐨👍🇭🇲🇺🇸🇺🇸
@daleslover2771 Жыл бұрын
Paul you wouldn't have a link at hand would you...The whole Emergency brake systems hard ware are hard to chase down.
@Jursaw2 жыл бұрын
I really enjoy all the attention to detail you put into these builds!
@eleazarsanchez962 жыл бұрын
Great job man I want to see the truck finished and running
@juanjosewtf78252 жыл бұрын
Peace and satisfaction in a single video, good job a greeting 😎
@jaybats78652 жыл бұрын
Man I would kill for a shop like yours it’s so awesome with all your machines and tools I am so envious. Having the space and tools makes working on trucks so much fun. Keep up the great work and thanks for sharing 😎
@rogeliojr.villanueva4860 Жыл бұрын
Epic! Great work so detailed. Excellent job mate!
@johncourtneyscott27572 жыл бұрын
Looks great buddy!
@austinniemela2 жыл бұрын
Thanks 👍
@ericwright66722 жыл бұрын
Put an electric switched hydraulic brake line lock on it for an emergency brake, push the pedal in & push the button it's locked, push the pedal to disengage its so simple
@ericwright66722 жыл бұрын
Cost like $45 & they work even if it gets ran into it won't move ,I have disc brakes on the back of my 82 4×4 & no emergency brake cables to worry about, & it would make a great video too!
@gregkillam2 жыл бұрын
SEM makes good products. 👍 Really happy w their satin black chip guard on my new custom grille & bumper. It really layed down & hardened over about a week too. I think I’m going to try their clear chip guard on my rockers, when I get my new paint done.
@Proudielad2 жыл бұрын
Hey Austin. Absolutely lovin’ your videos mate. It’s a pleasure to watch. Giving me a lot of inspiration and ideas for my 2000 ln167r Hilux here in Aus 👍 keep it up!
@Jar_Fishing2 жыл бұрын
I know next to nothing about this stuff, but I can’t quit watching. Quality videos!
@austinniemela2 жыл бұрын
Thank you!!
@ernestt49692 жыл бұрын
Nice job Austin, wish you were my neighbor! Really enjoy your videos, I too love old Toyotas.
@tomswindler642 жыл бұрын
With everything your doing to the truck are you sure you don’t want to do rest of the truck body wise,just saying.just keep doing your thing 👍👍👍😎😎😎
@tazmun2 жыл бұрын
I put bearing kits in and replace that crush collar before and that parts not bad. It’s intended for new bearings but I believe I’ve heard that some guys say you should replace that crush collar every time you retorque that nut. That’s what the crush collar does of courses is sets the on the preload on the bearings. I’m not sure though because for example on wheel-bearings you don’t torque an old bearing anywhere near as tight is you torque a new bearing. Once you’ve overtightened an old crush collar however I’m pretty sure it needs replaced as the way you describe the this one with your bearings tightening up.
@funwithmagnus8570 Жыл бұрын
ahhh. i see how you made your press adaptor, using an old axle tube. That is the information that will make my life so much easier.
@austinniemela Жыл бұрын
Yeah!! Game changer right there!
@todd_halfacre2 жыл бұрын
this build really is perfect... love every step so far good work dude
@austinniemela2 жыл бұрын
Thanks a ton!
@fearindestry2 жыл бұрын
Just clicked on the new vid and surprise surprise, no youtube ads! That made my evening 😁 Also like the daily vid of the overall 👌
@justaguy47882 жыл бұрын
I like that axle shaft pressing jig, pretty sharp!
@austinniemela2 жыл бұрын
Yeah it works sweet!!
@jonbayer34362 жыл бұрын
I'm going to have to quit watching you my list for upgrades to my 91 is already long enough. Great video as always
@austinniemela2 жыл бұрын
Haha better get to work!! Thanks!!
@3rd_gen_j2 жыл бұрын
How about just put in a line lock?
@rcsanks2 жыл бұрын
Adapt it to disk brakes! You won't regret it
@jameslevy68322 жыл бұрын
interesting I like the restoration of classic cars, if you want you can install the system that lowers the automatic windows
@adventureescape19292 жыл бұрын
A little surprised you didn't do a rear disc conversion while you were at it.
@marcionunes54162 жыл бұрын
Ótimo trabalho, um abraço do Brasil 🇧🇷🇧🇷
@john1010042 жыл бұрын
When you take apart the rear end add disk brakes
@kip87902 жыл бұрын
You need to use a zinc primer with your powder coating.
@Oneil42052 жыл бұрын
Great Job man, i really enjoy Watching you struggle in the pick up 🙏🏻
@patriot223 Жыл бұрын
Amazing work. Love it. Thank you for sharing. 😘
@tiremanboozer2 жыл бұрын
I love these model yotas. Had an 85 with a 22r in it and we use to pull a wrestling ring built out of 2 inch square tubing that was about a few thousand pounds and it pulled it like it wasn't even there .
@austinniemela2 жыл бұрын
Cant beat these trucks!!
@pride19702 жыл бұрын
Looks good love the detail of your video's Love this Hilux rebuild....
@frediefarmer2 жыл бұрын
👍🏽🇺🇸👍🏽 was you a mechanic by profession? You know your way around all the stuff you do
@austinniemela2 жыл бұрын
Yes I do this full time!
@frediefarmer2 жыл бұрын
I’m truly impressed by your ability’s.. love the channel
@MussaKZN2 жыл бұрын
I went to pickapart self serve wreaker and scored a LSD centre for my 89 Hilux for ...............$50 it was diff sale day! Get a LSD you can show us how to rebuild them..
@jaromnord83252 жыл бұрын
I would say to install a hydraulic E-Brake if you were doing a disc brake conversion!
@MyLazyThursdays11 ай бұрын
Awesome work, Well done
@muddyboots-mac11 ай бұрын
nice content, at 02:16 when remove there is a thin rubber O rings (Like rubber band) in my hilux and in your video i dont see any. So is it ok if i install it without it
@austinniemela11 ай бұрын
Yes all of these Toyota axles have those O rings!
@muddyboots-mac11 ай бұрын
@@austinniemela is it ok install the axles without the ring
@SlayerXLucky11 ай бұрын
11:45 : did you put a gasket between these two metals?
@davidteixiera83982 жыл бұрын
Check Toyota yard in Rancho Cordova Sacramento CA. For your break cable they might have it or LCE In Arizona. BTW AWESOME BUILD 👌 NICE SHOP I wish I was your neighbor almost done with my 87 pickup just dropping the motor in.
@austinniemela2 жыл бұрын
Thanks for the info!!
@dc57232 жыл бұрын
From my 1993 FSM, if the diff is 7.5 in then torque to 80 ft-lbf. If it's a 8 in diff then torque to 145 ft-lbf.
@jaybats78652 жыл бұрын
What is the heat resistant green tape you used before baking the wheel hubs? I didn’t see any link in the description for it. Thanks😎
@lars36662 жыл бұрын
We pretty much have the exact same tacoma setup. I need to jack mine up for long term storage, any recommendations for jack stands that will fit the lifted setup?
@vincecastro54022 жыл бұрын
Awesome videos, keep them coming! 👌🏼
@austinniemela2 жыл бұрын
Thanks! Will do!
@Niko-iw1sr2 жыл бұрын
Why didn't you replace the drums along with the shoes? Great work, can't wait to see the next video in the series!
@austinniemela2 жыл бұрын
Drums are good and I did new shoes!
@d.collier_82802 жыл бұрын
👍🏼👍🏼 looking good
@tylerandrews49612 жыл бұрын
As always, builds are great!
@austinniemela2 жыл бұрын
Thank you!
@neffwai2 жыл бұрын
I definitely need to make one of those bearing puller for my t100 had to do one. Not fun when u don't have that tool
@austinniemela2 жыл бұрын
Make one for sure! I have done it without the tool and wow what a pain in the rear!!
@2mo2time2 жыл бұрын
That loooks soooooooo good 👍🏼
@jaybats78652 жыл бұрын
Great job dude looks awesome!!!
@charliebruceortega84472 жыл бұрын
Looking good, this looks like going all out
@keilormarin76682 жыл бұрын
Un éxito como siempre !!
@davidgoeken79932 жыл бұрын
Spectacular job as always! Austin i really enjoy your videos..
@JohnAvantiBK2 жыл бұрын
Nice work...
@zama67022 жыл бұрын
Great video, ever consider building a bigger oven for powder coating?
@austinniemela2 жыл бұрын
Someday!
@johnnycashh71482 жыл бұрын
Cool shit as always bro. If you bag it...no need for an E brake...just slam it!! 😆
@kehanchanmin45222 жыл бұрын
Great job❤️💯
@diamond5272 жыл бұрын
Austin 👍👍💚
@matte56012 жыл бұрын
FACTS 👍🏼
@maxortega8073 Жыл бұрын
No wonder those Hilux last forever that axle looks like a fucking beast compared to modern cars
@robertjordan90752 жыл бұрын
Looking good 👍🏽
@vittore.h Жыл бұрын
How long did it took you the whole restoration?
@mrbeatle12212 жыл бұрын
So I need to reseal my rear axle on my 89 because its leaking gear oil into the drums, is there any way to replace the seal without using a hydraulic press to remove the axle shafts? I've got the seals for both the axle and the backing plate, I would like to replace both at the same time.
@markc9986 Жыл бұрын
Awesome video! is this a 7.5 or 8" diff?
@misaelaugusto81032 жыл бұрын
Poderia traduzir os produtos pra nós brasileiros trabalho top
@carlosperalta90602 жыл бұрын
Traduzir a español too
@ciscokid0307 Жыл бұрын
how much does a job like this costs. from removing the axle from the veicle and rebuilding the entire thing?
@عليراضي-ظ4ز2 жыл бұрын
العربي يثبت وجوده بلايك😂
@mountainpoo10662 жыл бұрын
No e-brake....no toko drift. 😆
@alanluna34252 жыл бұрын
Love the videos on the hilux! What kind of media are you using in you blast cabinet if you don’t mind me asking?
@austinniemela2 жыл бұрын
I’m using 80 grit aluminum oxide! Thank you!!
@That_Dyna_Guy2 жыл бұрын
Do you have a video on how you made the axle removal tool? Really cool
@austinniemela2 жыл бұрын
Yeah one of my last axle rebuild videos I built it!
@andresfeliz38412 жыл бұрын
Saludos desde Santos Domingo república Dominicana
@MichaelJohnson-sw5zt Жыл бұрын
Nice work
@joshuaa19212 жыл бұрын
Are you gonna go turbo for the engine or just the restoration ?
@diyjeff18382 жыл бұрын
Looks like a smaller ford 9". I wonder if it's 90ftlbs if that crush washer isn't crushed?
@fishermanmitch12 жыл бұрын
Great work, as always.
@CMEPUNKU2 жыл бұрын
What is the name of that clear green tape you use ? ( to many out there to guess ) Looks better than the stuff I use I want to try it !
@airfelisan93442 жыл бұрын
Looking good Chilu
@walterphillips99502 жыл бұрын
Good job, but it seems like a waste to powder coat the drums. You could just get new ones. Right?
@austinniemela2 жыл бұрын
Yes but new ones are bare so id powder those as well!
@Max-ik9qb2 жыл бұрын
Better keep an eye on those rear brake temps. There is a reason drums aren't factory powder coated. The metal has to breathe for it to dissipate brake heat.
@austinniemela2 жыл бұрын
I have powdercoated or painted every drum I own and never a issue!
@0780marco8 ай бұрын
Did you find an e brake set up?
@Wildlandfirefighting2 жыл бұрын
Please don't weld the diff on that nice truck, limited slip instead
@serrossi23832 жыл бұрын
💪😎
@Z-Bart2 жыл бұрын
Does anyone make a rear disc brake upgrade for that? Just curious.
@jonathanemocling38262 жыл бұрын
Awesome
@billmickey74802 жыл бұрын
Have you tried rock auto and see if they have it I know they got a lot of old parts for all of our cars I don’t know if those have your every cables
@austinniemela2 жыл бұрын
Yes they have the main cable from the cab but not the other 2 cables
@danyvalenzuela26908 ай бұрын
Pasión por el trabajo.
@phillippearce96802 жыл бұрын
👍
@kierangale54112 жыл бұрын
theres a guy in over in post falls that parts alot of toyota pickups he might have something i know he advertises on Facebook and craigslist
@ivanperkes60062 жыл бұрын
Headlamp on the spray gun!? You're living in 2024.
@augustinesusu6685 Жыл бұрын
Lovely
@RealityUntold Жыл бұрын
Couldn't you do a LSD in the rear axle?
@ОлександрТаран-ю4ь2 жыл бұрын
Доброго здоров'я привіт з Одеси Україна.
@speedymike78452 жыл бұрын
Hey guy hi there hey I have a 92 toyota pickup and have all the parts you for the emergency brake system.