You Can Still Bypass Microsoft Account on Windows 11

[@jesse7631]

The thing about using the Domain account method is that it never prompts you to log into a domain. It basically just lets you create a local account, and you're done.

[@dingokidneys]

I was curious about this so I just set up a Win11 VM in VirtualBox and tried setting up as work/school (domain) and it seemed trivially easy. I can't see a down side, unless it doesn't work with Win11 Home. I set the VM up as Win11 Pro. I didn't document what I did, but I think I just clicked past the email prompt and it asked "Who will be using this machine?" which set up a local administrator account.

[@cam_934]

@@dingokidneys : "unless it doesn't work with Win11 Home" its not an option for Home. Pro & Enterprise version are needed for a Domain account setup.

[@dingokidneys]

@@cam_934 I just had a go to see if there was any way to use the domain option with Win11 Home and - yeah, you're right - it really didn't seem to work. I didn't try breaking out the command prompt because that's kinda what we were trying to avoid. To me, this means that the Home version is becoming completely unusable.

[@Robert-sl7jo]

@@dingokidneys Well, their folder icons suck. In Windows 7 and 10 the folders were vertical so you could see better what is inside. I have 5,000+ photos and with these new folders, it takes me at least 3 times longer to find the photo I want. I only see 1 photo, whereas before it was 2 or more. That was a lot easier than trying to remember the dates. These so-called upgrades from my point of view are "downgrades". They could have kept the Windows 7 "look" while beefing up security. They had a good an easy to navigate operating system and it's been gradually "downgraded" ever since in my opinion.

[@imnotusingmyrealname4566]

If you don't have a domain that is. If you have a home network with a domain you will be able to join the domain.

[@bazwillrun]

If people still cant understand/realise how much MS hates the fact that you want to own and control your hardware and software they never will...like other companies MS wants total control over what you do and how you do it on and offline, and they want to know every single thing that you do, every site you visit etc etc so if theyve overlooked anything they can then clamp down on it..this video is another perfect example of it !...just think, if they hadnt put in place so many restrictive practices on hardware, the uptake of 11 would be far far higher

[@kevindie]

*_People rag on Apple for their “walled garden”, but as a primary MacOS user, I never run into these intrusive issues using it. You can still buy a new Mac today and use it completely offline without any issue._*

[@PatPat-pg1lr]

For Win 11 Home this worked for me. Just did this yesterday. When you get to the screen where you have to select a region kill your interent connection and proceed through the prompts from there. You will also see an option to select "I don't have an internet connection". Click on that as well.

[@JDO-u5f]

It’s about time American and/or European commissions start looking into these practices, and ban them. Your officially buy a product of them, and then they push you into a corner, so that they can force you to accept a heap of shit you never asked for. This starts smelling very fishy and is looking more and more like blackmailing. This is what gets me very angry. If it would be possible, I would never ever use any of their products again. Unfortunately, I professionally am bound to a bunch of tools that only run on windows, so there‘s no real alternative. I don’t want their shit, I just „want“ their OS, and but only because other companies force me to use that. That being already bad enough, there’s no need to add injury to insult.

[@Robert-sl7jo]

I get that every time I open my email, a prompt to buy Microsoft 365. I click on the trash can icon, I even listed them as phishing and I still get the prompt. As for blackmail, I was happy with my HP Z440 PC on Windows 10 Pro but was getting a security error code all the time. I'm keeping that as it should work on Linux, a fine PC never any trouble. Less noise than the Dell XPS 8960 I bought.

[@mazz85-]

Yes,. there needs to be laws and official OS. I am thinkin Quantum OS, cant fk with that thing.

[@slcsystems]

The problem you have is that your purchase of Microsoft products is not ownership, you are purchasing to use Windows on your computer, it will never be yours, much like office 365 and other Microsoft products, so legally the eu can do nothing as it is stated in Microsoft eula,

[@CelestialDeathscythe]

Agreed. Think about it. You buy a PC but have no internet access during setup. You can't use the pc and just bought a glorified paper weight. Absolute BS. There is no reason for this nonsense. Maybe it will stop when microsoft executives have to login into an account just to go a toilet or even eat and drink or even breathe.

[@Paulzpc]

Thanks, Brian, You have the best computer help videos on KZbin, I see others and when I am in doubt, I fact check that information on your video search, if it's not there it never happened.

[@Britec09]

Glad to help!

[@sgt_retiredcharlie4102]

Ad of July 24, 2024 this is STILL WORKING!!! ONLY fix on the NET that ACTUALLY works!!! Thanks bro, you ROCK!

[@techwg]

Bypassnro DOES work. What they did is make an additional check to see if you have internet connectivity and if it detects internet it ignores the bypass you enabled. So all you need to do is after doing bypassnro, unplug the internet or as soon as the OOBE comes back up release the IP before you continue and then the bypassnro will work. Lets remember.... bypassnro is a batch file included by MS on the official MS media. If they wanted to stop people using it, they would remove it. Also they did not add registry entries to prevent bypassnro working. Those entries are standard and part of the OOBE. I just did the leg work to figure out how to manually get up and running in case MS ever do remove their bypassnro that they chose to put in. That bypassnro was not already put in, that gets put in by the bypassnro.cmd file you ran... Type the following at that point type oobe\bypassnro.cmd and you will see the contents of the file. It adds that registry entry and reboots the system...

[@jaybugg3r225]

What does oobe mean?

[@techwg]

@@jaybugg3r225 Out of box experience

[@Alagachak]

Does not work - maybe if you BIOS /disable wan & wifi before first startup. For me now on a brand fresh new one once it had sniffed it had wifi it refuses to bypassnro even if i turn it off in BIOS.

[@techwg]

@@Alagachak It works. When you do bypassnro and it reboots, open cmd again and do ipconfig /release and then progress with setup.

[@JtotheRizzo]

At the command prompt (c:\windows\system32), I typed "oobe /bypassnro" and it says oobe is not a recognized as an internal or external command...

[@TechnoMinded-qp5in]

This is Why Windows XP/Vista/7 will always be the best no forced Microsoft account I'm stopping at Windows 10 because I dual booted it with Linux Mint Cinnamon get a micro or full tower case and stop relying on office computers that can't support multiple drives.

[@johnb6749]

I finally 'upgraded' to Windows 11 from Windows 10 yesterday, after I had to do a complete all-files (including my user-files....) Windows re-installation from a rescue-USB I had made in Windows 10. Anyway, all I did was create a MS account that I had no intention of ever using, Finish the installation, created a local user account with Admin status, then I simply set the sign-into-Windows option to sign-in using the newly-created local user account, then deleted the MS account, accepting the MS dire-warnings about how horrific my life would then be, and how much I would lose (I had no files in this account, just the obligatory and accursed 'OneDrive' rubbish). Job was a good-un, and now I just sign-in with my local-user account for Windows-boot.

[@dingokidneys]

Hey Brian, two little questions: 1. What is the domain method and why would people not wish to use it, and 2. Can you use the same Microsoft account on multiple systems; pros and cons.

[@robertjames4908]

When we still pay for the windows 11 license there should be no need to monetise us by forcing us onto a spyware account....

[@AntiGrieferGames]

Imagine paying for a operating system.

[@zeroturn7091]

I made my .ISO when Windows 11 became available so the OOBE method should still work for me as long as my LAN/WLAN aren’t connected.

[@Shiniri]

It ist also working in 23H2 i mean I Just did it as I created my own WIM to get a Custom ISO in Terms of Programs REGs etc. Otherwise Just use Rufus to create a Boot Stick there you can Check the Option to create a User Account which also bypasses oobe anyway.

[@sirnigelcogs]

Considering you're basically dropping the network connection so you can create a local account, wouldn't it also work just to disconnect the computer during installation?

[@AgentX-dh3lf]

Yes it will only work if you run the bypass.nro after first boot and computer is physically disconncted from internet.

[@michaelgalloway9362]

I just want to say that your KZbin channel is hands down the best for getting the most out of your Windows computer. It is of the good. I disagree on some things, but everyone will. Keep up the excellent work!

[@Sonya_Makepeace]

Wouldn't it be nice to be able to go back to installing off a CD with none of these hurdles to jump.

[@robert8]

What if you create a new Microsoft account and use that account to get pass the setup, and once all the setup is done, then go back to Microsoft and delete the account you created. I don't know, its just a theory.

[@syzuna_]

the thing is, it is still linked to your install and it is set in a lot of places last I checked so even if you switch to a local account the microsoft account is still in a lot of registry entries and therefore still linked to you somewhat

[@MackMedia-l3w]

Your MS account will hold the encryption key to unlock your drive. MS doesn't tell you that you will need that but you will need to find that and back it up. Them you can create a local account and log in with that. You can then remove the MS account. If your drive is still encrypted you can use the key to access it. I can't specify if it remains locked or not but I would imagine so. Keep a separate data drive and only plug it in once everything is set up.

[@JasonWestaway]

Thanks, Brian, for that video. Was a great watch and we know what works and what does not. Take care.

[@Britec09]

Thanks

[@Keith.W]

Thanks for the video Brian, much appreciated

[@Britec09]

My pleasure!!

[@Robert-sl7jo]

Rule Britannia!

[@freedustin]

You are not sure why they do this? They want to make it a cloud based OS. That's why.

[@JoaoRyanPlim]

When there's no network interface it allows you creating a local account. You can also disable NIC on bios prior to beginning installation. It always works for me.

[@claudiafischering901]

Cool thanks. But a nice tip for you for the registry. Type three letters than you can navigate faster through the registry editor. sof + right arrow + mic + right arrow + wind + right arrow + curr an so on. An go up again only hit left arrow again again again - it closed each folder by hit the arrow key.

[@niezzayt3809]

This video aged like a fine Milk in less than 24 hours. Really fantastic.

[@jvp3640]

Ehhh, you say you don't understand why they try and force you to use a MS account? Well that's simple, this makes it even easier for them to track whatever you do on "your" computer. Remember some countries have quite strict laws against tracking, even the EU have made some moves, but the moment you log-in to a service they can track whatever they want as you then accept whatever terms of service is included. They can then use that data to show you adds (that's basically how Google and Facebook have been printing money for years) or they can use all the information they can grab to help train their AI-systems...

[@teknixstuff]

@@erikferguson71 Windows Insider builds sometimes do that already.

[@KelticLad]

Great video, what would be the way forward for custom builders in the future

[@Britec09]

Thanks

[@johnpedersen8387]

Thanks for the video Brian. Do you know if the Rufus metod still is working to make a local account?

[@Britec09]

I will check this weekend

[@johnpedersen8387]

@@Britec09 Thanks Brian 🙂

[@jameslamev]

I just installed Windows 11 (23H2) on two HP laptops and was NOT asked to create a Microsoft account (maybe this is just available in Australia?). The problem for Microsoft is that their users have lost confidence in them. Windows 11 installs are now actually declining. If you are using MS in a business environment (small or large) the last thing you need is another thing to worry about i.e., privacy. Having been a windows user for 30 years, even I'm planning migrating to Linux - it the "rusted-ons" are leaving - MS have a problem.

[@GamingMutasim]

Thanks for giving us what we need❤❤❤

[@Britec09]

You're welcome

[@tiagoferreira086]

Although im not planing installing w11 is always interesting to see these kind of videos just to learn something new! You rule my friend!

[@stagelinedpro]

The back arrow key was still there when I did this. Thank you for this video BTW.

[@cynicalsingh3487]

Thanks man u r the best❤ your method works even for without arrow screens u just need to restart after the commands

[@alohamark3025]

It's nearly Labor Day in the states, and this has to be done for Windows 11 Home edition: netsh interface set interface "Wi-Fi" admin=disable Like Lazarus, the blinkin' computer keeps trying to reach the network. "HAL 9000, are you there?" After setting up your local account, just enable your wifi using netsh with disable replaced by enable.

[@anthony_4570]

Thank you Brian Ms must be watching yours and everyone elses videos to see what you's are doing so they can plan there next approach of attack Cheers have a great day

[@musicalneptunian]

Bruce Buffer with the tale of the tape. It's a double header of bruising UFC, American Neo Capitalism against The Planet and Microsoft against The Customer. Both of them are no holds barred heavyweight bouts. Let's get ready to fight over registry keys...

[@STONE69_]

I have two other ways to bypass, but I keep them a secret, otherwise they will block them.😃

[@olexijl78]

Dear Brian, For your information: you sound like release command would work even without bypassnro command. This is not necessarily the case. You still have to use bypassnro command, but after this you have to use the ipconfig's release command later on, as soon as you are at login of MS account again. Plz set VMware and make the 1st snapshot while you are at the login to MS account (while you didn't make anything yet). The 2nd snapshot is when you are at MS account, (while done the bypassnro). Now you need just revert to the 1st one, and do the release command, it won't work further. Revert to the 2nd snapshot, and since bypassnro is already done you need to do the release command. That's it. The method does work for 23H2/24H2.

[@chipminton2451]

As of 9-8-24 8:30pm this still works!! Saved me!!

[@kogami-masterofcoin9932]

This method does not work I tested it just now, it just says you lost connection and stuck in a loop or restore connection Edit: I used bypassnro and disconnect ethernet and it worked

[@memstechtips]

Very nice video! 😉This method is actually how Rufus bypasses the forced MS Account Creation, hopefully Microsoft doesn't patch it.

[@Al.j.Vasquez]

Almost 7 minutes to get the actual method, thanks, but i was in a hurry 😅 so I didn't like to spend time learning about methods that don't work anymore.

[@RockyEssing]

In the latest update of windows, they are trying to force you to log into a Microsoft account after rebooting. None of the tricks you can do during setup work in this case. I have found 1 method, but I'm not sure how reliable it is. When this came up on a friends computer, I used CTRL+ALT+DEL and then chose sign out. When I signed in again, the prompt was gone. Hope this helps. Rocky

[@t0mn8r35]

Excellent tip like always. Thank you Brian!

[@Britec09]

You are very welcome

[@wizteezy]

Spot on! Thank you for another great video.

[@PopsSinging]

Haven't watched the video yet Bryan, but I just used Rufus to make bootable USB installer that still creates a local account on installation.

[@hugosantos1476]

That's my prefered method too.

[@JohnDoe-wl8zk]

That's the way. Use Rufus to not only disable account loging but also other very useful things. It's an essential program for me.

[@derekswitzer9624]

Can this method be used for booting a vm from it for creating a a customized iso?

[@dingokidneys]

@@derekswitzer9624 You could try passing the USB thumb drive through to the VM. I just managed to boot from a thumb drive in VirtualBox by passing it to the VM then breaking into the EFI firmware on boot up to select the thumb drive as boot device. Don't know if this would work with MBR BIOS but I know that both VirtualBox and KVM allow you to set up a VM with EFI. With VMWare or HyperV your mileage may vary.

[@VuxCollects]

Thanks! Still working 🙏🏻

[@NicoKirsten-zi1wt]

Surely the easier way is to simply leave the pc unconnected until after the installation. I have done it, works fine

[@DJKR_20_PRO]

Hello, I am a blind computer expert of United States. I installed Windows 10 Pro on a virtual machine. I use Microsoft screen reader to get the installation process, and bypass Microsoft account.

[@derhohlenbar]

Two days ago I woke up to windows 11 welcome screen. They forced the download and started loading it against my will. I did find, on second page i went to, a tiny link stating I want to stay on win11... or words to that effect. Now my pc will not boot to windows at all. PC rebooted and wouldn't go past "bios" They seriously broke my pc.

[@allscriptureforalllife8505]

I just purchased a hp computer. if i hit the shift fn f10 keys nothing happens so that I can enter those codes

[@vasudevmenon2496]

I never connected the windows setup ever to the internet. Those bypass regedit are present and still works

[@bbbbbbbbbbbbbbbbol]

The oobe\bypassnro will work just fine. You have to be disconnected from the internet to make it work. It goes like this , turn on the computer go through the region and keyboard region and the alt keyboard then use function shift f10 or shift f10 and type in oobe\bypassnro and hit enter. the computer will restart and go back through the region and keyboard region and then click on the i dont have internet and continue with limited setup and you have bypassed the window 11 login. Make sure you are NOT connect to the internet.

[@mrmeeks222]

This worked for me today

[@XLSlim]

Doesn’t work today

[@carolynlambert8797]

what part of england are you from? love your videos very educational! studying for my A+ comptia

[@danieldjami6432]

I just bought a refurbished laptop that was reset to factory and while trying to add my office 365 it locked me because it is still locked with the previous company's office 365 account. It asks to login with the previous company's credential. How do I solve it? Thanks for the help!

[@peterschmidt9942]

With all these shenanigans from MS, it's no wonder Linux user rates have climbed in the last 18 months. It will be interesting to see what the stats look like for Win 10/11 and Linux once it hits October 2025. ATM I'm mostly using Linux as even Win10 lately has been introducing bugs with basic operations and culling productively. I'm only logging into Windows sporadically for emails at present.

[@motoryzen]

Linux user rates have BEEN climbing for easily the past 5 years let alone 18 to 20 months...especially as Mint has picked up in popularity as the most solid ..gentle transitional Windows replacement and has been aging like fine wine..just without the sugars/carbs

[@peterschmidt9942]

@@motoryzen The stats seem to say something different. Linux has always been around 3% until the last 18 months where theres been a noticeable increase. Although it's spiked a lot more from Dec 2023 (I'm sure with people defecting from Windows). Mints a good OS for the newcomer. As much as I think the team does a great job, it still has some issues with certain tasks and behaviours.

[@motoryzen]

@peterschmidt9942 yes by paid off sites that don't report accurately . Lenox adoption throughout the past 7 years as easily climbed from somewhere between 3 and 4 all the way to over 8% total

[@miker8225]

I'm not sure weather this is regional but I installed Win 11 just yesterday and the bypassnro method still works fine.

[@sugumaraln.ganesankpm-guru3837]

Brian, i got my new Acer laptop today. But I can bypass the Microsoft sign in page. I try login in CMD then in cmd I can not type anything Brian. Please help me

[@davesmith8101]

Why would anyone want to install Windows 11 now that it screen grabs everything you do and sends it to M$….?

[@minigpracing3068]

Even on Windows 10 LTSC, Microsoft will nag you about setting up a Microsoft account when you are joined to a local domain. Goes away if your company uses what used to be called Azure and other cloud services. I haven't seen this on 23h2 win 11 education yet, but it probably takes a month before they start nagging. MS killed a lot of good included tools, things like WDS and MDT no longer work with 11, I had to set up a FOG server to image my systems at work. It's good, but would have been nice to use the tools that I've been using for 15 years.

[@PearlX9]

Brian kindly tell us how to Activate Windows when : 1. One has Activation Product Key from previous windows install 2. One doesn't have product key 3. Without getting activation key from your sponsor etc. Thankful and cheers...🎉

[@elGordo42]

can you just use an older windows version during install?

[@kanedgy4562]

I use a laptop how do I get the command prompt? I used shift+f10 and fn+shift+f10

[@ehsnils]

So far I have just resorted to disconnect the network cable from the computer until it's fully installed, but this has been on the Enterprise variant of Windows.

[@justyusuff]

Thank you mate, it did work.

[@CesareVesdani]

Can you set up a local account by default on Windows 11? Is that possible?

[@JasonWestaway]

Hi, A default local account? I highly doubt it as Mircosoft is really trying hard to block all local accounts being made. So you would have to set one up. Please use the video as a guide. Hope that helps.

[@CesareVesdani]

@@JasonWestaway The video really helps.

[@JasonWestaway]

@@CesareVesdani It sure does.

[@Mario583a]

Yes, you still can. The method to do so is shockingly simplistic instead of doing this dance.

[@Mrshoujo]

Why not Zero out the BypassNRO key? 1 = turns off bypass, therefore 0 = bypass

[@don3970]

Thank you sir, its realy helpfull👍

[@1mwls]

I don't get why they care if I use a local account. Except for mining your data. What I'm more worried about is the whole Bit Locker thing.

[@teknixstuff]

Open admin cmd, and run this command: manage-bde -Off C:

[@musicalneptunian]

Harry Potter: be afraid. Be very afraid.

[@STONE69_]

Look at it this way, there are many benefits for most people that are not Tech savvy and are to lazy to make their own backup, to be signed into an MS Account.

[@teknixstuff]

@@STONE69_ It has little-to-no backup functionality unless they are paying for microsoft 365.

[@BrentonSmythesfieldsaye]

It doesn't even need to be that involved. Just start the install without being connected to any network and the opportunity to set up a local account will automatically be allowed. No special effort required.

[@motoryzen]

Automatically? close but not precisely. You'll have to select the clickable option that is smaller font and a duller color of " I don't have internet, use local account instead". That is IF..Microcrap doesn't alter things ( such as darth vader altering deals he has made with the good guys in Star Wars episode 5 Empire Strikes Back ) further one day involving allowing that option even if no internet connection is detected.

[@BrentonSmythesfieldsaye]

@@motoryzen "Automatically?" - Yes automatically you will be presented with the option, which does NOT happen if you are connected to a network/Internet.

[@EvolvedWizard]

Can you still just set it up with a microsoft account, then create a local administrator account, then login to that and delete the microsoft account?

[@rblythin]

Yes you can, did it yesterday on a new mini PC. Created a local admin and standard user then removed the ms account

[@gaysenberg8806]

Crazy how this man just keeps talking instead of going to the point, so he gets a 10 min video.

[@ziyaadmahomed2060]

Thanks man. This really helped

[@wonkey3733]

How does the ipconfig /release work if it is not connected to a network, surely the oobe\bypassnro should still work in that case, or am I missing something here?

[@johncampbell4084]

Bypass does work! Just tried it. You need to put in the bypass command and remove all wifi anntenas, ethernet and usb wifi adapters once done it will ask you to connect a network but at the bottom "I don't have internet is enabled!". Again This is the lastest updated windows

[@mrmeeks222]

What's the bypass command? I don't have the bypassnro file in my OOBE folder

[@johncampbell4084]

@@mrmeeks222 weird. Just google it. Shift +10 I think brings up the command line to enter it

[@Michael-y9o5g]

... You were aware of them removing the back arrow upon using that ip release command, but didn't bother saying what to do when that happens?!

[@wildthing6668813]

Are Microsoft trying to push people away from Windows? IMO there doing a very good job of getting people to ditch Windows

[@Shiniri]

I Just installed win11 23h2 with oobe\bypassnro after restart Just Killing the Connection with ipconfig /Release and this does in fact Work. I dont know why you capping there xD

[@Lord_Funk]

Get an ISO of older Win 11 install from the Microsoft site while still possible. That way you can install older version which can still bypass Microsoft Account requirement and also not activate BitLocker by default, then update to latest version. Windows is getting worse and worse with each iteration.

[@dragonstorm9968]

It is real simple wy MS is blocking to bypass a MS account: this is because the are going to force bitlocker disk encryption during setup. The only place where you can save your bitlocker key is in your MS account, you cannot store it on your device because you cannot access it during setup, and you also cannot print the key because you cannot setup a printer during Windows setup.

[@yogibarista2818]

or in the case of a domain account (which is a valid option for W11 install) bitlocker recovery keys are stored in the domain's active directory.

[@dragonstorm9968]

@@yogibarista2818 That's true, Thanks

[@audecosta]

Thx bro.. just installed Win11 eventho back arrow is removed it still can bypass 👍

[@kaseyboles30]

It would be easier to unplug the ethernet cable prior to installing. No ip adress to worry about. And if for some unfortunate reason you're on wifi (less secure, slower, less reliable, not the best way) then turn that off. either in bios, or if not possible just don't sign in.

[@CemAkncbay]

FYİ,30TH OF AUGUST TODAY İT STİLL WORK!!KEEP İT UP😊

[@Nein99x]

The OOBE method must've been blocked very recently then, because i was able to use it while doing a fresh install of W11 on monday this week. I guess i have to put network drivers on my bootmedia now.

[@simonb6048]

Brian, today (middle of July) was setting up Lenovo laptop for someone and Shift+F10 / FN+Shift+F10 commands no longer opens up command prompt.

[@tonywise198]

Playing cat and mouse.......!! Thanks for the video.

[@Britec09]

Thanks for watching!

[@wilsonj4705]

And in another week or two they'll probably block this.

[@Britec09]

probably

[@wilsonj4705]

@@Britec09 Just noticed a W11 install from a year ago is now giving me a "MS Account Problem" warning and is telling me to sign in when I boot it since the last update

[@RandyBTC]

IP release worked well for me thank you very much

[@pubpopsongs6625]

Thanks - worked for me (just about!) though the said 'back arrow' at the top of the screen has apparently been removed (June 28 2024) for 23H2, as well. However, I was still able to insert a name for the PC User and make a Local Account - though I don't actually know WHY it worked. 😎

[@downundarob]

what is the difference between your method, and not having the network lead plugged in?

[@camdenndean]

Thanks for the detailed understanding of the problem and the thorough explanation.

[@markd.9538]

This method is fine if you have a current Windows 11 USB already created - because you don't connect to the network until AFTER the bypass is done, this method cannot be stopped. Future downloaded versions of the installer may cut out the bypass, but thats future media. So get it now peoples!

[@kitrodriguez992]

Never thought of that tbh. Luckily, I have both Win10 and a pretty early copy of Win11 on my Ventoy drive.

[@arejaz21111]

I didn't finish video, but after I added registry key about bypassnro then it worked with 24H2 on my VM. I clicked back on sign-in page, then disconnected internet and after clicking next it automatically allowed to make local account.

[@MoreBollocks-ui2zs]

What could possibly be a valid reason for requiring a new pc to be connected to a network before you'll be allowed to set it up? If people want to opt in to this nonsense that is fine but I flatly refuse the notion that I should be forced to do so or that there is any benefit for me in the process. It also irks me that even the "pro" versions are subjected to this. I really wish we had a solid OS alternative out there. Win 11 is crap, win 10 is 75% crap and Linux is simply crap of varying degrees.

[@cmb1972]

why the long drawn out procedure on what not to do, very confusing?

[@VidzVideo]

it didnt work for me. when I go back after releasing IP i end up on a screen that says whoops you have disconnected from from the internet and I end back at the network connection screen.

[@manueldimarco5553]

Hey! one question... can this also work for the loop in ? "checking the connection to microsoft. this might take a while windows 10" I can't pass this it keeps telling me "looks like something happened. lets try reconnecting"

[@dtone1]

This is probably a dumb question, but why not just let Windows have an MS account that you create when installing and then create and use a separate local account after the installation is done? Never use the MS Account again.

[@teknixstuff]

Because they make that a pain.

[@dtone1]

​@@teknixstuff I think that it is less of a pain than these bypass methods that are gradually being closed down. Seriously, I thought that maybe having any sort of MS account on Windows 11 might cause privacy concerns even if you are using a separate local account all of the time. I don't see how this is the case but maybe somebody else has some inside knowledge - maybe by tracking internet activity when using a local account vs. an MS account?

[@waynedornelly1863]

Great stuff bro thanks

[@MrGamabunta33]

Made my Local account by disconnecting internet completely during the process. Yes the OOBE command did not work.

[@STONE69_]

I doubt they ever block that method. Not everyone has internet. It would cause a huge lawsuit for sure.

[@Boda.Attila]

6:26 Does unplugging the internet cable have the same effect, or am I mistaken?

[@aunaerr]

THANK YOU SO MUCH 👍

[@jvstriq4375]

My laptop is jus stuck on the network screen I can’t go back to the “personal account” option

[@MoreBollocks-ui2zs]

Step 1: Make as many windows users as possible use MS accounts. Step 2: capture screenshots every few seconds to ensure you have every action performed by these users. Step 3: Sell targeted ads...based on more access than anyone else has managed to date.

[@ricseeds4835]

Can you take down the old video then? None of the methods in that video work for the Home version