You'll NEVER Fish a Swimbait the same way after Watching THIS...

[@dontnonowuno9953]

Holy moly just read thru the comment section and I never seen so many MEN whine about a great tip to help you catch more and bigger fish...guy gives up all the juice ,shows you exactly what to do and how to do it and you give him crap? 👌Thx Milliken,most of us get it.

[@Orthoshooter]

Totally a novice to glide baits. Just a confidence thing. I appreciate the content. It has lit a fire under me, and I just modified my flow glider that has been on the shelf for years. Took me 8 minutes and the action in the pool is 🔥 I’m throwing that next time out! Thanks again💪🏻

[@RyanMiller-te3ef]

I did the modification with a hacksaw blade and it worked great no flying plastic and a smooth cut! Thanks for the great content! #keeponMFing

[@CharlotteYakkingNoob]

Good idea on the hacksaw I just brought a glide today the guy at the store told me to watch Ben’s video. And I don’t have a dremel so I’m glad I ran into your comment before I brought one because I do have a hacksaw!!!

[@2mouthbassin]

I think 6th sense should use your input and re release this glide with your modifications. I like it and I'm gonna buy one! Update: I hammered em!!

[@thecreekcrawler]

I am trying it tomorrow on some creek bass...super stoked

[@cross_fire_]

I’m fishing a private trophy lake with a possible 18lber in it. I plan on using this bait a good bit. Hopefully I’ll hammer them. I’m also going to use it this summer on my home lakes

[@stevecooper8121]

The modification really gave it great action. On another note FYI I used to bite my line off until I broke a chunk out of my front tooth and then I got the bill from the dentist and that's the last time I did that. Great video thanks for sharing your secret mod.

[@stewart-roseproperties4545]

Hey there…this was a great video! Great modification. QUESTION….I have a few of the 6th Sense Speed glide and really like the bait but can’t seem to keep it from rolling out. I understand it is a chopper style but none the less…..could you share a pool demo of how you work this bait? Thanks again for all your pool demos, super helpful

[@johnburleson9799]

Nice modification. Huge change in the action. Keep up the work!

[@scottalspach8020]

Just watched your video on categorizing swim baits. One of the best fishing videos I've watched and I'm 61 years old and have watched a few.

[@thecreekcrawler]

Big TIP..if you do want to try this I would recommend the see through flow gliders. I am able to see where the plastic ends without worrying about cutting into the bait. awesome mod!

[@mackmartin9033]

I put a hole through mine at the top😂

[@thecreekcrawler]

@@mackmartin9033 lol I think I did the same...it is holding water inside and I cannto find out where it came from

[@garagedoortec4083]

Dude I bought 2 yesterday for me & my son that’s what’s up!!! Thanks brother

[@larrybeckham3855]

Killer vid, have gone thru and modified a dozen baits. I love how they will completely turn around, great action now! Thanks

[@fire71man]

I threw the flow glider yesterday for the first time. I just seen this video today so I will be making the modification! Awesome video

[@Glock-1]

I bought one of these flow gliders and did this mod straight out of the package and this thing is sick! It literally chops so tight it almost doesn’t move forward, crazy little cover glide but now I have to buy more!

[@danielsimpson3439]

I've had 2 flow gliders for a yr and tied them on a few times with no luck. Stoked to try with this mod!!

[@amals51]

I have two of these for now, made the modifications to one so far and the action is awesome!

[@everythingoutdoors-vl9bl]

I can’t believe ur letting this info out but it’s much appreciated I’ve been tinkering around with sanding and stuff for a lil but mostly on the s wavers

[@robertdtimmerman6507]

I already have all the Flow Gliders. I was already a fan of this lure and with this Milliken Modification, I’m gonna be catching a lot more big Bass. I have a feeling a few new colors are going to be coming with this lure.

[@ryanvarner6520]

So good I had to watch this one again!

[@mxdad8810]

Your awsome. Thank you for sharing your what you learned with us and making us all better Bass fisher's.

[@jeffreywalker12]

Hey man! I just did this modification on my flow gliders I hated the way they swam and after this modification I went out and tried it ended up catching some nice fish on it!

[@JohnRamosBrand]

Awesome modification and quick too!

[@570SilentFishing]

I just got into swimbait fishing all my rods are medium to medium heavy. So I didn't have a heavy casting rod, and I learned that if your strapped for cash DSG has a f&s tango heavy rod for under $30. So far it's been great for musky, pike, bass, and stripper. Also my local dsg just put up a massive 6th sense display so that's why I got into swimbait and musky fishing.

[@charlesguyton8486]

I bought a draw and flow glide made your modifications vary helpful works great thanks ben

[@dennissoule3235]

Impressive Bud Fatlips can't resist I predict your gonna win a lot of tournaments wish you the best

[@cogtheangler1773]

Thanks buddy, have the draw and the flow glide I’m going to modify ordering a router now! The only reason I got into 6th Sense is because of you buddy!

[@roderunnr450]

That was a huge difference in action of the bait. Great tip.

[@graysonwales8839]

Great demo Ben. I just bought the flow rider and the draw and plan to make the modifications before I test them on Bob Sandlin this weekend. Thanks!

[@kvaughn1573]

Wow! Just got my first glide bait in the mail yesterday! Cheapy xps, caught a 4 1/4 on it this morning! I ordered some to paint and another that will be in, in December lol Thanks to you I’ll be throwing them in tournaments!

[@The420Fisherman]

Awesome show thanks ben

[@Daddywarbucks556]

I grabbed on of the glides and checking amazon for the rotary tool lol you’re the man!

[@CharlotteYakkingNoob]

How’d it go?

[@johndaniels2922]

I can’t wait to try that bait on some Lake Erie smallmouth

[@bamadondon0495]

I did this with one of the Mike Bucca Baby Bull Gills and holy BALLS does it fish like a completely different bait!!!! But I had done it like some time back. And didn't know that This was a thing of swimbaits that people do I was just trying to get it to turn more on a hard pause! .. it works. So if you're a beginner before u go mess up a 6 sense bait go buy u a few $14 baby bull shads or bull gills an try it on those for practice if for anything else!! 💪🏼✌🏼🕺🕺🕺

[@DeerSlayers9807]

Just purchased one just like the one you modified, plan to do the mod on it, and use it in my first tournament of the year on Ky Lake.

[@brandonevans2015]

Will most definitely be getting a few of them.

[@danrogers9945]

Thanks for advice! Been tweaking baits forever!that is amazing! these are like stick baits(our group have a saying...they hook everything but fish!other rods,cloths,fingers,the boat,the truck!but a bass can crush them without getting hooked!lok

[@andrewanaruma2358]

I see 6th sense coming out with this version of lure soon! Great info

[@bartcasto2240]

So 6 sense gonna be releasing the Milliken chopped flow glide. Sick run of your pattern and color waves . Maybe your signature painted on the belly or back. I would buy them all day lol just saying you got your rod line, thinking your line of gear needs to grow !

[@austinhubatch6070]

Just ordered 2 traces for a derb I got in 2 weekends. Wisco fall smallies are the target. A buddy just caught 28lbs of Northern wisco smallies on the trace. 2 day delivery we'll have em for practice.

[@RemainsSZN]

Love your vids bro keep up the work brother

[@aaronfofana9510]

I see you bro. Thanks for that demonstration

[@carolinabadbass5447]

I used a close quarter hack saw with 10" blade and worked like a champ. I drew a line for reference.

[@CharlotteYakkingNoob]

Did you take a pic?

[@kashaw33]

Always a great day when you post brother!

[@frontsideonly5167]

Just got one brother looking forward to seeing how it swims after I modify it

[@austinmtx199]

You can hardly tell if it's a real fish or a lure. That motion change is insane! Gonna try this on a few of mine 💯🔥🤙

[@jessebrock7574]

Awesome video I'd love to try one of those glide Baits out

[@JT-hr3mv]

Great video will be buyin a couple thanks

[@JacksonBullockFishing318]

I really needed this! Just got a flow glider, and tried it out and was not happy with the action……

[@thareeldillfishing4153]

👆🏻 scam

[@JacksonBullockFishing318]

@@thareeldillfishing4153 yea I know

[@royradcliff2252]

I order flow glide to day tackle warehouse enjoy all your videos be safe 🇨🇱🇺🇸💪

[@brianlee9074]

That's the juice right there boys! ✌🏻😎🎣

[@troyharper7546]

Alot of great information and tips Mfer 💥💥🇺🇸🇺🇸 Great video ColeSlaw 👍💯 Thanks for sharing your secrets Ben 👍💯

[@maddmannziggy89]

Great video, fishing was tough this weekend and nebraska blew it so it was a rough weekend here lol

[@darrinminkiewicz6714]

Ive had a flow glider for a few years now first time i used it bass fishing i hooked into a giang tiger muskie and it got off. Never had another git on it again. Im a big time glide bait fan got thousands of dollars invested into it i paint my own and ive got a gan craft 303 on the way im going to paint my self. I got a certain blue gill color that i do that the bass cant resist

[@timothyparker9810]

I don't know if you've ever seen it but ultraviolet glue is the best thing in the world for fishing lures and repairs and making lures the ultraviolet light dries the glue instantly it is such good glue you can lay a fishing line beside another fishing line glue it and it will not break the glue takes thousands of pounds 10 South strengths to break it

[@jonathonsmith3220]

I would use your code but that military discount is just a little better 😂. I just ordered some of these to play with, looking forward to trying em in this weekends derb

[@ericpettyfishing]

Man, this mod has changed my whole game. Modded so many cheap glides like this and it is amazing. Turns a 10$ amazon knock off into a absolute bass slayer. Thank you very much, and I mean that. You Rule dude! I also reccomend the green stone bit from dremil for my trimming. Smooth as ice and the plastic that melts away easily breaks away leaving a clean edge.

[@demonic2534]

Ur probably not fishing em right u don’t need to mod em lol

[@huntercapp191]

Could you try this with a spinning rod to show the difference between a bait caster and spinner. I currently only have spinners but would like a caster. Just not sure if it’s worth the money to switch if it doesn’t change much

[@squishypush3343]

Great vid. Ive always wondered if you added a small lip on the front if it would help if have a tighter wiggle patern. Seems you have found a better way.

[@Whitehalo117]

Man 6th Sense is killing it honestly

[@Mags120fish1]

Gold. Thanks!

[@livelovecannabis6262]

Thanks man! I dont really have the funds to dump $200+ on swimbaits, but i am in the $25 demographic, and im not afraid to hack at some to make them run like $200+ swimbaits. I appreciate these two videos a lot. I plan on getting a Flow Glider soon, but just went and did this mod to a couple of S-Wavers, so ill be throwing them asap. Thanks again man!

[@nills2gills811]

Any updates on the modified s wavers?

[@eagles20jon]

Some awesome info here

[@charliewilliams3978]

The small sander attachment is called a Drum Sander..also if you get some Cut Off Wheels you can cut and sand with it. The cut off wheel will get in tite like you small saw wheel. It just gives you a bit more.. control

[@eddieevans9612]

Thank you

[@andrewalkhazshvilly2238]

Tell them to remake it with the mod done already. Maybe a different tail

[@mattwiederholt7258]

Fr love sixth sense and the flow but the action isn’t there. Hooks on the other hand are a different story they mean and I love em

[@GrumpyGillsFishing]

For sure, but the price is gonna go up $50 😂

[@catchofthedave8681]

They are coming out with one thats made to glide and chop. Final prototype milliken has been using in opens and shit. More of a chad shad type action/hinkle action. It’ll be out this year.

[@carlking3964]

OH THEY WILL DO IT!!!! TO THE TUNE OF 400$!!!

[@215FFVet]

I wonder if they haven’t made one yet due to copyright infringement kinda similar to the z-man chatterbait situation where they could make similar but needed differences to circumvent the laws

[@zactorstrick6619]

Love the videos you teach me a lot about baits

[@the_dent1st262]

That rotary tool and its attachments looks exactly like what we use in our straight hand piece rotary instruments at Creighton dental

[@curtisfawver8655]

I’m going to give them a try

[@jackiepeebler6345]

Ben keep up the great work. Could you give us some of your thoughts and tips with the Trace. Thanks

[@keithtidwell3644]

I have tried twice to modify the flow glider 130 how much would you charge to make me a gill one ? my eye site to poor to do this.

[@castorcreekcustoms9722]

I’m heading to to get a new swim bait rod, reel, and some glides today when I get off

[@TheSwimbaitGrind]

Caught my first one on the gilliken draw today. Have caught a couple nice ones on the trace, definitely going to try this flow glider mod

[@joshuaglaude1549]

Your swim bait videos are helping me out a lot. I won't be grinding on mine, but how to work them and use them all be helpful. Just bought my first expensive to me swim bait, large to me, it's like 6 inches I think, at a fishing expo the other day. I know that's not large but I'm used to frogs, jerk bait and crank baits. So this is huge to me. Anyway, thanks for the content. Hopefully I get drive good use out of the thing.

[@brianwhitney9538]

Hey Ben, looking for some tips on fishing super muddy, low visibility canals where there’s tons of natural food. Thanks!

[@joshheath5456]

I’ve been waiting on this one ever since you showed us this lil gold nugget a few days ago! Dealll!💪

[@garyhightower8105]

I have the trace but am going to buy the floglider as well you e started something bud !

[@tomchalupsky5199]

Nice modification Ben

[@bo-easyoutdoors294]

I have one bit definitely going to try this mod on it.

[@The420Fisherman]

120 sand paper works well too. Been working on a small BPS glider similar to the s-waver. like I told my tournament fishing buddy Ben Milliken is the glide bait king?

[@BravoJoe604]

Just picked up 2 flow glider 130 and 2 draws , going to modify

[@jeremybinz9888]

Will this work on river2sea, spro and savage models??

[@jaeburbank8635]

You should get Casey to keep the flow glider but change the front end of the mold to your enhancement and make a new bait the CHOP GLIDER 130 a new bait without months of testing and saves everyone from buying his baits to cut them up an instant hit I'd say I'd buy them!!!

[@ZeroLuckMitchy]

Cool result from that mod.

[@Idk2355]

Nice, thanks for the tips

[@christophershelton1735]

The one flow glider I ordered was so stiff it wouldn’t glide at all. It’s on its way back to 6th sense for warranty. Hope the new one works better because it looks absolutely amazing.

[@ckleinfishing]

Hey Milliken, Thanks for the awesome content! I have been contemplating doing some mods on some baits for a long while... You pushed me over the edge, let the plastic fly. Keep up the awesome work! Good luck in the Opens, go smash them!

[@ericsagel29]

I made a similar mod on an swaver 200 but haven't had much luck with it but haven't thrown it much either

[@nicholasgursoy1114]

I’m about to purchase the draw from the 6th .I live Nor-Cal and fish ca delta and many lakes up north . I was hoping for you to help me decide what color u would recommend. Plz and thank you for everything you do and share .

[@josephshark5983]

What are some of the ways you recover after a super long hot day of fishing and if any tips would love to see a video about it

[@MillikenFishing]

Generally I try to drink as much water as possible, but it's hard when I prefer beer. Then I try to go to sleep early AF.

[@theicemanfrost]

What knot he tie? Always ise polymer but the ole loop csn be tricky.

[@JS-oy6nn]

The last video was awesome. Kinda figured you would have to make this video. I thought you explained what you did and how to do it extremely well in The Last Video. Sometimes you gotta get the crayons 🖍 out. 🤭

[@chrismalas8747]

Killer video what rod and line size do you use with the 130

[@DavidBronstein1961]

Seems like you could just work with 6th sense to design and manufacture a chopping version of this lure. Any plans for that?

[@GrumpyGillsFishing]

Totally had to pull one of these out of my hand todays 😂 man that felt wonderful.

[@mattfleming86]

I did that with a speed glide and a frisky 3.5lber. Fun stuff. Right in the back of the finger.

[@GrumpyGillsFishing]

@@mattfleming86 last year I think it happened at least 3 times to me. The worst one was my knee. The other times it was just my finger, but having a 3-4lb catfish on the other end of it wasn’t my definition of fun. lol. He flopped out of my hand and was hanging from my finger by the hook wiggling around. Felt like crap. But my knee actually almost made me faint. EMS was called and everything. Firefighters showed up and they were real disappointed that I had the hook out before they got there. lol. I think they wanted to do it. The guy only called EMS cause I almost passed out from the heat and pain. He helped me to my car and gave me a cold water. Once I was in the AC I felt alright again.

[@michaelbilleter6081]

Just picked up a few more up in the PNW lots of bluegill fisheries but no baits like this to use. Think I'm gonna load the boat with this hack.

[@johnforeman9776]

Great Modification BUT When Will 6S Make The Bait Like The Mod Right Out Of The Package?

[@SolidMango-gh3jk]

Because other bait companies may already have a patent on that special join geometry that’s how they keep their ideas/engineering protected for a while... That would be patent infringement.

[@michaeldawson9756]

Swims like one of those split rapala balsa lures i used back in the 70s.

[@tyler1988-o5r]

Awesome video I’m going to order me one now 😎

[@MillikenFishing]

Do it

[@brownleeoutdoors9132]

I'm buying one on Friday for sure

[@brownleeoutdoors9132]

Thay seems fake

[@raytubach8988]

Sorry old video, I know but what do you think is the problem with hookups on that draw? Was it hooks?..

[@rfd10001]

Hi Ben, love the channel and subscribed. When you talk about “chops” do you use the reel handle and do 1/2 winds or use the rod tip?