YOU NEED TO SEE THIS! Saab 9-5 Aero RWD Rearaxle

How does the Opel Omega Differential fit against the og9-5 Subframe?
Follow Me On Instagram:
/ jonaskakarikas
#saabfansaroundtheworld #rearwheeldrive #Saablove

[@C21536]

“Killed by A holes.” You damn right.

[@JonasKakarikas]

💯

[@tompayne4945]

Agree with the sentiment totally, but I think "Jerks" scans better and family friendly 🤓👌💩

[@J.Galvao76]

That´s one of the thousand of advantages of living in the same country where the car is born... Loads of parts... resources and occasionally the forgotten prototypes... Awesome build Kakarikas!!!

[@JonasKakarikas]

🙏

[@C21536]

It’s funny looking back here in the US, I had a Lincoln/Mercury Saab dealer near me. Maybe 5 Saabs on lot, one of them a white 97 9000 Aero. Always been a fan and intrigued by the unique aspects of Saab. But being a boutique manufacturer they got the short end of the stick. Who would (they said) pay 40,000+ for a 4cyl, when you could get a comparable V6/8 for same money? They didn’t tell you how much ahead Saab was in its engineering. And everyone thought they were a pain to work on because the engine must be in backwards like the early 80-90’s 900. The 2.3 is a pretty easy engine to work on, and I’m glad Saab decided to make it that way for the DIY guys and gals. I called a local garage to get a quote on replacing the spark plugs ( knowing I could do myself) on my 05 9-5, and the owner said “we don’t work on Saabs.”

[@JonasKakarikas]

Sad story in the end :/ Saab has always walked their own path, might be part of the reason they dont exist... But still awesome to cary on The legacy of the brand that gave so much. Like Trionic 5/7 is just a masterpeice of engenering by itselft 💯🙏

[@marekkeerand279]

Jonas has an excitement overflow in this video :) BTW if it was me i would let all the rusted details to get sandblasted and powdercoated before they will go to the car :)

[@cgcrantz3544]

Hej Jonas! Vilken entusiast du är! Jag hade förmånen att åka med i en 9000 provbil med fyrhjulsdrift. Vid ratten satt Magnus Roland, en av alla Saablegender!

[@JonasKakarikas]

Hej Cg, kul att få varit med när det begav sig! Hade donerat min vänstra arm för att kunna spola tillbaka tiden 20år! Men man får göra det bästa av situationen med det som finns kvar

[@valentinmilanovic9183]

Inte armen hur ska du bygga bilar utan armen

[@1972TRIUMPHSTAGK]

This is going to be an epic build, can't wait to see it done. Very well done so far Jonas.

[@JonasKakarikas]

🙏

[@alexanderpenev2974]

GOOD NEW brother!!! Perfect. Now it will put more fuel to your unpacient to drift it like stolen ... extremely soon :) Can't wait to see the next episode!

[@JonasKakarikas]

🙏💯

[@paulreeves5012]

Hi Jonas, Fantastic news that the parts will fit with a bit of fettling. As you have more jam than Hartley's (English expression meaning you're very lucky), you should rush out and buy a Lottery ticket! Seriously though, well done on the work so far and it's as good to get a quick update as it is to get a longer video. If I could make a suggestion and that is to document what parts you use with suppliers and part numbers if possible as you'll need to replace bits in the future and trust me when I say that as you get older, things slip away and if you sell the car, the new owner will appreciate the information.

[@JonasKakarikas]

Thanks, its a good thought. Its a little bit of extra job putting in links and stuff. But many of the parts are being bought used and then its really Hard to refer to anything But a partnumber maybe. 👍

[@bagobabies]

Sheeeeeeeeeeeeshhh,,, I love the progress man, keep it up we can't wait to see your ideas come to life💯💯

[@JonasKakarikas]

🙏🙏🙏

[@HimWitDaHair98]

This is fantastic news for the build! You're so enthusiastic! You'll be through it in no time and building power

[@JonasKakarikas]

Hope you are right my friend 🙏

[@arivirtalacasting]

Your words you say very begining,was so true. Respect

[@JonasKakarikas]

🙏

[@Bausa72]

You can Jonás! It's a good project but very hard. Good luck 🙌

[@JonasKakarikas]

🙏💯

[@topspoke]

Yesss! That rear axle assembly looks great. You could always do some body clearance work if the upper control arms need some more space to travel up.🤔

[@JonasKakarikas]

Yes, its easy to make space upwards 🙏💯

[@olivier8039]

Hi Jonas, this video is fantastic. I have 3 saabs and those cars are just fantastic, fast and comfortable. The 9-5 OG 4WD will be definitively a killer :)

[@JonasKakarikas]

Thank you 🙏

[@rodneyturner6959]

@@JonasKakarikas I told you broski please please please AWD og 95 pretty please

[@JonasKakarikas]

I dont want it awd 😂😂😂

[@rodneyturner6959]

@@JonasKakarikas hahahahahahahaha worth a try keep up the amazing work my friend

[@rodneyturner6959]

At least tell me is it possible to do og awd?

[@maxmadmax5529]

Well done. I watch your movies with great pleasure. Fingers crossed.

[@wojtekhotowko6214]

Fantastic pice of work, congratulation! Is there any possibility that you can make 3D scan of that straight bar, that every one could can fabricated this in local tuning manufacturer?

[@JonasKakarikas]

Dont know anyone with a 3d scanner unfortunately

[@Jappmannen]

Jag vet en här i Oskarshamn som har en sån. Han hjälper säkert till.

[@JonasKakarikas]

Känns dock inte som den delen är det man behöver scanna, infästningarna är som original så det är ju bara ta längden 🙃

[@l.p.9221]

This really looks great!!!

[@JonasKakarikas]

🙏

[@janihalttunen5501]

Great that parts are finding right places and work are little bit easier.

[@JonasKakarikas]

Such a big win 🙏

[@2steaksandwiches665]

You told us you could finish this project up in a weekend!

[@JonasKakarikas]

😂😂😂

[@2steaksandwiches665]

@@JonasKakarikas seriously man, my buddy and I about 15 years ago were drunk talking about This exact project. We thought than that it was just ramblings of drunk men. Lol. Glad you’re doing it

[@JonasKakarikas]

I might be drunk to 😂 lets so how it goes 🙃

[@hisham56hamilton50]

Trevlig sommar Jonas.. Roligt o se dig.

[@JonasKakarikas]

Tack detsamma 🙏

[@hisham56hamilton50]

@@JonasKakarikas Tack Jonas för fina vids. Kan du tänka dig göra en video över hur man lagar enkla plåtskador på lack och puckla. Sköt om dig. Älskar dina vids.

[@政杨胡]

what a good news for saaber🎉

[@JonasKakarikas]

It really is 🙏

[@Aero93]

This going to be sick project! 🤙

[@JonasKakarikas]

🙏

[@lachywocky]

Anybody know cheapest place to get wossner pistons? Thanks

[@Martink9191]

Maybe i missed it, but what hubs did you juse, that has drive shaft compability?

[@JonasKakarikas]

I built my own hubs

[@martinsvenssob2641]

Underbart Jonas 💪👍

[@JonasKakarikas]

😉👌

[@SaabAtical2009]

a wiseman said... SuperNice 😁

[@JonasKakarikas]

🙏

[@jennyoneill4386]

Would an Audi a4 quattro tank work it has a gap for the shaft to pass through

[@JonasKakarikas]

Dont know the measurements or where its placed

[@jennyoneill4386]

It's under back seat divided in 2 with shaft running through it , I have a b6 quattro 2003 model

[@shieldmaiden8524]

Nice one 👍

[@JonasKakarikas]

Thanks 🙏

[@shieldmaiden8524]

@@JonasKakarikas it makes me so sad about what GM did to Saab, all because Saab was better than them 😔

[@urbanjentry222]

A moog adjustable arm would probably fit the the top arm if the spindle was shortened to fit top rather than bottom are you polybushibg the top and bottom rose bushes

[@JonasKakarikas]

Everything will be polybushings 👌💯

[@tompayne4945]

The outer rose joints are far better than a polybush. I assume you're talking about the inners? For a rear drive track car I'd consider spherical 'rose joints' which will take more abuse. I would be most concerned about the trailing arm to sill bushes though. They are going to be pushing the whole car along, as opposed to standard where they are taking braking loads at most.

[@kic96]

Passar inte omega bak axel?

[@JonasKakarikas]

Nej tyvärr, den är rätt annorlunda i design, upphängning osv. Plan B var att ta hela golvet från en omega så man flyttar med alla infästningar. Men ser inte ut att behövas 😎

[@kic96]

@@JonasKakarikas Oki trodde det var någolunda lika i botten. Lycka till med bygget Tumme UPP...

[@carlosedelgarcia477]

👍💪🇨🇺🇺🇸

[@JonasKakarikas]

🙏

[@АлексинаИра]

Jonas has an excitement overflow in this video :) BTW if it was me i would let all the rusted details to get sandblasted and powdercoated before they will go to the car :)