You Should Always Use HTV On Wood. Here's Why! + Amazing Cricut Tip

FREE 3-Days to Master Your Cricut Challenge: makersgonnalearn.com/3-day-ch...
Calling all Cricut owners: We're about to blow your crafty minds. We're here to say that HTV on wood is way better than regular adhesive vinyl on wood. We have rock-solid evidence as to why we feel this way, and we're excited to share this information with you! If you're a vinyl lover, we challenge you to try Iron-On wood instead. This video will not only share why HTV on wood is a must, but we'll also share some Cricut tips and tricks that you'll use in tons of future projects too. Prepare to be amazed! Watch this video to learn this must-see Cricut hack! HTV on Wood is Better Than Adhesive Vinyl on Wood and HERE'S WHY! + Amazing Cricut Tip.
Cut Files and Fonts Used:
Crafting In Progress 2: makersgonnalearn.com/cut_file...
Get Thousands of Cut Files, Fonts, Printable Guides, and more - makersgonnalearn.com/join/?el=YT
Use code “KZbin” at checkout for your special discount!
💗 Subscribe For New Videos! goo.gl/MSz2Db 💗
Some of the links provided are affiliate links. Makers Gonna Learn is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
Cricut Explore Air 2: cricut.pxf.io/EaD9BD
Cricut StandardGrip Mat: cricut.pxf.io/LPk0xY
Cricut EasyPress Mat: cricut.pxf.io/MXe5Mn
Cricut EasyPress Mini: cricut.pxf.io/BXLnNW
Scissors: amzn.to/3aDxDzY
Minwax Polycrylic: amzn.to/2KzC588
Pin Pen Tool: bit.ly/2SCiMlZ
Cricut Transfer Tape: amzn.to/3gYBGLG
White Vinyl: www.143vinyl.com/starcraft-hd...
White HTV: www.143vinyl.com/siser-easywe...
✅Shop Our Favorite Products: www.amazon.com/shop/makersgon...
✅ Shop 143 Vinyl: www.143vinyl.com/?partner=219904
✅ Shop Cricut Supplies: cricut.pxf.io/QO1YYA
✅ Order Your Cricut Maker: cricut.pxf.io/5bJ523
✅ Get Your Cricut Mini EasyPress: cricut.pxf.io/BXLnNW
✅ Masking Paper Transfer Tape: amzn.to/3bB57jJ
✅ Pump Bottle: amzn.to/2yCgsBJ
✅ Scotch ATG Gun: amzn.to/2yOvu7n
✅ Dishwasher Safe Mod Podge: amzn.to/354190H
✅ Our Favorite Weeding Tool: amzn.to/3pwnJc2
✅ Our Favorite Printable Vinyl: amzn.to/3nhkd2P
✅ Our Favorite Burnishing Tool: bit.ly/33Ejamf
✅ Pin Pen Tool: bit.ly/2SCiMlZ
✅ Starcraft Vinyl: bit.ly/3uP2GUo
✅ Siser EasyWeed: bit.ly/3hjLgLP
Contact us here: makersgonnalearn.com/contact/...
Find Us Here:
WEBSITE: makersgonnalearn.com/?el=YT
INSTAGRAM - / makersgonnalearn
FACEBOOK - bit.ly/2N8URpb
PINTEREST: goo.gl/SxDAak
#cricut #cricutmaker #cricuthack #cricuthacks #cricuttips #cricuttutorial #cricutmade #svgfiles #svg #cutfiles #diecutting #handmade #craftproject #diytutorial #easydiy #craftideas #easycricutcraft #beginnercricut #cricuteasypress #vinyl #htv #ironon #sublimation #sublimationprinting #diymugs #designspace #cricuthowto #cricutbginner #cricutinspiration #cricutdesignspace #howtocricut #designspacebeginner #cricutsealing #howtoseal #sealingcricut

[@Maustiffany]

Brand new to all this. I used vinyl on a sign and sealed with resin. Really good to know about the htv for the future!

[@donnachilders8421]

Omg! This is exactly the information I needed. Thank you! Thank you! Thank you!

[@mrsmcphate]

Exactly ALL the information I needed to know before my next project! So incredibly helpful! Thank you!!

[@MakersGonnaLearn]

So glad it was helpful! You're so welcome!

[@donnamuhs3847]

Thank you Rachel! Well presented and great learning video!

[@tejuanasmith970]

This was an awesome informative video!! I have been having trouble with vinyl on wood, but I plan to try the HTV way!!!

[@melcope]

This was soooo helpful. I am a new Cricut user and this really is helpful. Thank you.

[@shirleyl1699]

Thank you! I'm a newbie. Did not know the difference between HTV and regular vinyl. Excellent place to do some learning!!

[@MakersGonnaLearn]

You are so welcome! Thanks for watching and commenting!

[@rebekahgee5133]

This video was so helpful!!! Thank you.

[@vondascreations-vondagray4113]

Thanks! Just ordered HTV yesterday for the first time. Love your videos, I got a Maker last year.

[@MakersGonnaLearn]

Oh yay!!! You will LOVE HTV.

[@donnasimmons5364]

You make everything look easy and great too. I'm new at this so I need all the help I can get. I enjoyed it!!!

[@MakersGonnaLearn]

Thank you for watching and commenting!

[@paulsloan4725]

Great session thanks for sharing.

[@swpa64blueeyes]

Thank you so much for this! I have a piece of wood w/ rope on it, thought I was gonna need to do the sanding down and everything else...Awesome Tutorial 😀

[@MakersGonnaLearn]

Glad I could help!

[@Eclecticajewels]

I briefly thought about using HTV on wood signs but never tried to……yet. I wasn’t aware of the difference in characteristics with HTV as opposed to regular vinyl and now after seeing your tutorial, I am informed. So, TFS your expertise with all of us. (PS Being that I’m a Northerner, I just have to say I LOVE your accent!! Lol, that Southern accent is just so relaxing imho - I know that might sound silly of me but, for me it makes listening to your tutorial MORE interesting😊)

[@theresadamico7253]

Thank you so much for this video. I used the HTV technique so easy and fast.

[@MakersGonnaLearn]

You are always welcome!🙂

[@vcervantez1]

Love this channel y'all r so helpful! Thank u so much. I'm still learning

[@MakersGonnaLearn]

You're so sweet!! Thank you!

[@hsepulveda1]

Ohhhh I am def going to make those signs!

[@beckyfahringer474]

Thank you 💕 will definitely be trying the htv 💕

[@MakersGonnaLearn]

Yay! You will love it!

[@melissaray9788]

Tooo cute!!!!! Thank you for sharing!!!! ❤️❤️❤️

[@MakersGonnaLearn]

You are so welcome! Thank YOU for watching and commenting!

[@lnc-to4ku]

That was so great! Thank you so much!! ❤

[@MakersGonnaLearn]

Glad you liked it!

[@nancymonroy4842]

Loved this video!!!! Thank you!!!

[@MakersGonnaLearn]

You are so welcome!

[@kccolley6119]

Thanks for the htv tip!

[@MakersGonnaLearn]

You are so welcome! Thanks for watching and commenting!

[@girls45party06]

Thanks for sharing. I love this idea better lol!

[@MakersGonnaLearn]

You are so welcome!

[@patsyo.6116]

My husband used to own a sign business years ago and he told me when I got my cricut that I’d never get vinyl to stick to wood. I can’t wait to prove him wrong with HTV!

[@verobeier]

excellent video

[@barloch1]

I always polycrylic or modge podge and then stick my vinyl. Never had a problem. But now I want to try the iron on!

[@PookyMoreno1983]

Well, that was my bright idea for my current project and it is NOT working out for me. It's like the transfer tape is too sticky and won't let go of the vinyl. What am I doing wrong?

[@2008June1]

Super cool tip!

[@MakersGonnaLearn]

Thank you!

[@madelinescreations7955]

Great tutorial thank you

[@MakersGonnaLearn]

Glad you liked it!

[@florrichardson2361]

Thank you dushi

[@tonyam1804]

I wish I’d seen this last week. I was trying to do a long quote for a small area and couldn’t get it to weed. I knew I could use HTV but didn’t know how. Thanks

[@MakersGonnaLearn]

You're so welcome! So glad you have this info for later!

[@deejay9671]

I had no idea that's awesome

[@MakersGonnaLearn]

So glad you think so!

[@deejay9671]

This makes me wish that regular vinyl already had its transfer tape on it like htv

[@MakersGonnaLearn]

Haha we wish it did too

[@taunyatotten4007]

when using HTV What would cause the color to bleed on the project??? what a great video appreciate all your great info !!

[@amandajohnson1641]

I see you all use different scrapers- is there a brand or size you like better? I recently misplaced my Cricut one and looking to get a replacement. Love y’all!

[@AngieWilliamsDesigns]

Can you use a heat press doing the same thing? I have siser easyweed. And I want to do vinyl on wood. I do have a Cricut Heat Press. But I usually use my bigger press.

[@dutchen39]

Thanks for this...didn't know HTV could be used on wood. Can't wait to try it!😊

[@MakersGonnaLearn]

You are so welcome! Thank you for watching and commenting!

[@dianaharley5210]

I have wood that was sanded, stained and sealed with polycrylic. Which would be better to use? HTV or 651? I wasn't sure how the HTV would react with the polycrylic. Thank you!

[@tiffanysmith2255]

Rachel, I am a member but still a newbie at trying things I want to put something on some barstools that I have purchased that have already been stained & sealed and everything. They will be outside in the weather! Please please tell me what I should do so I do not ruined these!! I know this is a older video I am just now coming across it… Still trying to learn your program. Don’t know why it seems so hard for me. Please tell me what your recommendation is for the Barstools . thank you so so much this was a great video.I need your expert advice on that! I was even thinking about screen printing them if that would be better… I don’t know. Like I said I just don’t want to ruin the stools …:-) Love all your videos they’re so informative, and make me want to turn my cricket machine on no matter what time of night it is… LOL

[@simplysherry5863]

I really am learning a LOT from your video's and I am so very glad I came across your channel. Question, bcuz I am very new to this, can you or have you ever used ink infused transfer sheets on wood? I had a thought for a project and I thought I'd ask bcuz you are the pro 😊. I definitely didn't want to waste my money on Cricut brand ink infusible's if it doesn't work out or just shldnt do it. Thank you

[@MakersGonnaLearn]

Thank you!! So, you can't use Infusible Ink on wood :) You can only use it on "sublimation blanks" or shirts/fabric with more than 65% polyester in them. Best of luck!

[@blkbrn1952]

So would HTV work on painted wood? And if yes what type of paint is best? I am getting ready to do a project and was planning on painting the wood first using acrylic craft paint, Apple Barrel brand.

[@mb20fan]

Question, instead of staining this after the vinyl has been put on, could contact paper be used instead to cover the entire image to keep the H TV in place?

[@rosiespalletco5224]

I have stained wood ready for HTV but i want to seal with an oil for outdoor use. Is this best before the HTV, after HTV or not at all. Oil tends to rub off any kind adhesive in my experience. Thanks

[@kelliwarrick1839]

I enjoyed this video! I'm new to the Cricut world. I want to make a step stool for a child. I want to paint it first and then put a saying and vinyl cut out picture on it. What is the best type of paint on the wood, that the HTV or permanent vinyl will stick to? Since she will be stepping on it, to brush her teeth or wash her hands, should I do the vinyl and Policrylic coats or stick with the HTV and no coat on top? Thank you!

[@angelaerick6511]

Can this be done on whiteboard? I love this idea!

[@christopherlyons7613]

There's quite a few different types of HTV. What do you recommend for use on wood? There are even specialized HTVs that even claim to adhere better on wood (i.e. Cricut Everyday Strongbond). Any recommendations? How about the printable HTV? How well does that apply to wood? Anything to consider with regards to wood types and thicknesses? Can you stain or paint prior to applying? Thanks.

[@jodywilley9936]

This helps so much! I always get nervous trying to place the regular vinyl as I'm a perfectionist and want it centered perfectly, so HTV is what I'll be using from now on! Quick question so I can finish using the regular vinyl I have on hand--when you are done sealing with the poly, what do you clean your brush with so it's super clean and ready for your next project?

[@MakersGonnaLearn]

So glad it's helped you! We still use regular vinyl many times a week, but we do love HTV. So, we just rinse our brushes off as soon as we use them with warm water for several minutes. Also, make sure the poly is water based and not oil based :) Best of luck!

[@JackiLeaWWP]

we do a lot of refinishing. I keep a canning jar (with lid) on the table with water and a little dish soap to rinse the brushes. Gently agitate and rinse out really well. Blot dry with a shop rag or towel and hang your brush or upside down in the jar so your bristles have free movement and don't dry all crazy ;) I've been using the same three brushes for the last 5 years.

[@daisypage4551]

Okay new to cricut and what!!! I'm so excited to try HTV on wood.

[@MakersGonnaLearn]

Yay! Good luck!

[@daisypage4551]

@@MakersGonnaLearn did it yesterday... And im hooked

[@dawnchristensen2393]

Hi there, can you use a normal household Iron for the Heat Vinyl?

[@spensonmcmillan9308]

I tried this technique last using my Cricut Heat Press on 340 and melted my HTV. I was super sad. I'll invest in the hand held one as see if it works better. Or should I just lower the temperature?

[@centerpetals]

would you recommend using this htv method on canvas too?

[@elaineselesky3910]

Where do you get your thin sheets of wood? And also how would I write someone name bigger than the little scale?

[@susangolembiewski6624]

I’m making a wood sign that will be outside. I spray painted it with Rustoleum 2x ultra cover paint & primer. Do you recommend HTV or permanent vinyl? I wasn’t sure which would hold up best outside. I thought I should use the polycrylic sealer after paint before vinyl.

[@jessk6300]

I am new to all of this and don't have an easy press. Would I be able to use an actual Iron? But put something in between the iron and the transfer tape?

[@melodydagys8389]

When using HTV on the wood sign, can you put polyacrylic on top of the stain before applying the HTV? I like the look of the satin shine more than no poly?

[@ckc5640]

I think I heard her crumple the transfer sheet. I use mine over and over tons of times. It's $. Thank you for the awesome HTV tutorial. I will love using that. I have a hard time getting vinyl to stick to wood.

[@MakersGonnaLearn]

You are so welcome!

[@jamiblankenship2237]

Hi! What heat is your press on? I am trying htv on stained wood- first time! I have a large easy press. Am i supposed to keep it moving or press like a shirt? One sign i did is "ok" but the htv turned a bit yellow. Any way to fix that? thanks!

[@laurabruce6120]

I see so many conflicting things about whether or not to seal only. I’ve heard so many ppl say it will actually make the perm vinyl lift?

[@aliciacastanada]

I only have the heat press will that work? Also will it work if wood is painted? If so does it only work for certain paint?

[@forgetfulone923]

Would this work with unfinished wood? What about plain canvas? What about painted canvas? Thanks for the video!

[@SmittenKitten.]

Did you create your logo (the scissors + lightbulb)? It is SO CLEVER!!! I wish I had that ability.

[@MakersGonnaLearn]

Thanks!!

[@jenniferfriedlander5450]

I love HTV because I hate transfer tape

[@kelseymoreland8140]

On the heat guide for cricut it says it need to be on the second heat setting, is tht true? Also how long do you need to move the east press around?

[@tiffanydavis4243]

Loved this video. Does the HTV work the same on painted wood?

[@MakersGonnaLearn]

Yes ma'am, just make sure you use the correct type of paint! Acrylic works well, multi-surface doesn't.

[@kimberleeduncan6143]

Can you use reflective vinyl on wood for outdoor sign? Does it need sealed? Please help! 😊

[@EvangelistOsborne]

What can I use to make my 651 Vinal stay on wood outdoors for winter & rain

[@apricotpoodles08]

If I wanted to use HTV on a wooden cutting board (likely already sealed from the store) do I need to seal it to make it food safe, and if so what's the best seal for that?

[@connieroedig9959]

Can you put the htv on a painted piece of wood and will it last on a sign for a door in the elements

[@miniscenesgb]

Really helpful, thank you. I see you don't put the teflon sheet over the transfer film when you apply the heat, I didn't know that was ok either

[@MakersGonnaLearn]

So glad it was helpful!

[@Sanction05]

What if your using oil based stain and oil based polycrylic. Will this effect the sealing of the vinyl?

[@jenniferfriedlander5450]

Let me ask you, I’m doing a project with HTV on small wood squares , do I stain it at all?

[@rosievasquez8009]

Thank you so much for this !! Can I use my regular heat pretty and also can I paint the wood any color before placing image

[@alicianelson8189]

I need this answer as well

[@ReginaB09]

I need this answer as well i want to paint the wood but scared it wont work n stick very well.

[@jennifergrangergray785]

@@ReginaB09 I think in an above comment it said you could use on painted wood

[@marafleites7883]

If I have a very smooth painted wood, can I still use Iron on?

[@meaganodell4479]

I don’t necessarily agree I have used regular vinyl the permanent kind and it does just fine. I just put polycrylic on top of it. I have used HTV on wood before.

[@jamesbarlowjr.3762]

Awesome tutorial on both methods. So you need to Poly the Wood first before applying the HT Vinyl? And if you wanted to seal it with the HT Vinyl what could you use to seal the whole piece? And would the HT work on Painted surfaces as well? Thanks so much. I am new to this whole Cricut thing and let me tell you I am in overload! So much to know, but for an all round Vinyl which one could be the “Go To” for everything? Thanks Again! James 😊

[@mariannecorman]

I would like to know this as well! I’m about to start my first HTV on wood project but I’m still unclear about the prep. Do you seal it before pressing it on?

[@jamesbarlowjr.3762]

@@mariannecorman Good Afternoon. Just stain your piece, let fully dry I waited a day or two. Then you can put your HTV on after that. Don’t seal it first. You can seal after the Vinyl is on. Hope this helps. 😊

[@rickmelcher6845]

So I REALLY like your info on both options. Thanks! One question: I want to use the HTV, but does the wood need to be smooth like glass? Or will the vinyl adhere into micro crevices on the wood?

[@Classychickblog]

Did she ever answer you?

[@rickmelcher6845]

@@Classychickblog no… :(

[@kylieb4836]

She did mention in the video, it’s one of the benefits of using HTv on wood - it doesn’t need to be completely smooth. I don’t think Rachel is part of this channel anymore, so prob the reason you haven’t received a response.

[@ruthcedeno1055]

Hi do you prefer htv for plastic or glass cups as well , if so do you have a tutorial for that

[@MakersGonnaLearn]

no, use adhesive vinyl on cups and glasses :)

[@kimberlyprice4803]

I have tried Oracal 651 and it was a nightmare. I will try HTV on my wood round tonight.

[@tianacarey9252]

I have had issues with the iron on vinyl bleeding what looks like the glue around the designs. Why do you think this would be?

[@ebikemaine]

Couple things to help. HTV on wood, you can use a heat press, use a bigger paint brush.

[@MakersGonnaLearn]

We do not recommend using a heat press for this. See, wood is not perfectly flat or smooth so a larger press can't easily reach all of the uneven areas of the wood, so it will take much more patience to get into all the grooves enough for the Iron-On to stick to the wood :)

[@sydneyoffner287]

Does it matter what type of stain you use? Oil vs water based?

[@tbrown0327]

Silly question but can you use the bigger heat press on the wood? I don't have the miniature one. Thanks

[@MakersGonnaLearn]

Not a silly question! We actually don't recommend that because it's so much harder. See, wood is not perfectly flat or smooth so a larger press can't easily reach all of the uneven areas of the wood, so it will take much more patience to get into all the grooves enough for the Iron-On to stick to the wood :) I hope that makes sense! You CAN do it with a larger press, but be prepared to be very patient!

[@nightowl8548]

What setting on your little easy press?

[@Clarachk]

Well this is great news for me :0) I am really excited to learn this bit of crafty HTV goodness. As always, thank you for bringing another option to the table! The more we learn about how we can use our vinyl the braver we can get with our creations!

[@muzbysmom]

You are using an Easy Press Mini. Can I use my 12x10 on a larger cutting board with a 9" "square" saying?

[@michellelutzke736]

When I applied HTV to would that I sanded and stained, the adhesive went all a round my letters. I used an easy press for 30 seconds. Why do you think it did that? And do you know how I can get the adhesive off the wood now?

[@mehlizabeautylondonmakeupb9856]

For personalising makeup brushes. Would you prefer iron on or infusible ink? Also what if heat can damage paint of brushes?

[@MakersGonnaLearn]

We would not recommend this. Use regular adhesive vinyl :)

[@mehlizabeautylondonmakeupb9856]

@@MakersGonnaLearn thanks

[@broadhead077]

I put htv on wooden coasters. Should I seal those with mod podge or polyurethane or something else?

[@maryanntoffoletto9363]

QUESTION: WHEN USING HTV ON WOOD PRODUCTS THAT NEED TO BE WASHED OR RINSED AFTER USE, HOW WELL DOES THE HTV STAY ON? FOR EXAMPLE, A Charcuterie board may need to be washed or rinsed after use? 💜

[@ilyrivera7297]

Great question. I’ve wondered that myself.

[@michellerainey6612]

Watch the recent charcuterie board video. They say that if you allow polycrylic to cure for 30 days, the FDA deems that food safe. You can use HTV or vinyl.

[@paularaulinaitis3068]

What technique / products do you recommend for wood that isn't smooth/flat?

[@MakersGonnaLearn]

To sand it very well. If it's still not super flat, it would probably be best to add some sealer to it to make it smoother then add regular vinyl.

[@agnekastanauskaite7552]

Does ir makes big difference of appearance of wood after you apply polyacrylic? If I have a design just on the top of wooden box, should I apply polyacrylic on whole box or just top of it would be fine?

[@MakersGonnaLearn]

It will make the area glossy :) So we recommend adding it to your whole design.

[@lindachapman4352]

Can you use this method for food wood tray or one that would be wiped down with a water rag?

[@MakersGonnaLearn]

Yes, but be sure to seal it after! :) We recommend using this Minwax Polycrylic: amzn.to/2KzC588 to seal it!

[@barbarabarnes1019]

Do you have to stain the wood for the htv to stick to the wood?

[@jillb7234]

How will the HTV withstand being outside? I use Oracal. 651 for my signs and have no problems at all with repositioning on my projects!

[@sondradavis8942]

I would like to know this to.

[@leeiera5482]

can oracal 651 stick to Mdf board?

[@thomasnorthcastle4130]

@@leeiera5482 there really would be no reason to use 651 ( outside use vinyl ) on MDF as MDF isn’t used outside.

[@tahomyjo]

You mention that the vinyl just won't stay on the wood and that's why you have to seal it with polycrylic BUT if you sealed the wood first with the polycrylic then add your vinyl it will stick ....I have 3 signs in my home that are approx 5 to 4 yrs old that the vinyl is still stuck very good ...I did use 651.

[@MakersGonnaLearn]

Yes we recommend that as well :)

[@1234heck]

should I sand between coats of clear coat?

[@missy856]

Do I not need to use butcher or parchment paper when doing HTV on wood?

[@cherylanngariepy3382]

Haven’t had any issues using outdoor vinyl. What kind are you using that it doesn’t last outside?

[@MakersGonnaLearn]

I'm not saying we have issues. HTV lasts a very long time, do whatever works for you though!

[@erinwenningham9992]

Could you also seal with mod podge?

[@ritaobrien9093]

Any advice on HTV on wood that has several slats? 94 strips of wood together.)

[@monicab28]

Can you layer the HTV on wood? Like if I want to use a couple of different colors on one piece of wood?

[@uhohmomo7685]

I also want to know. This showed up in my recommendations today.

[@MEC03]

If I use 651 on wood and the project is insdoors, would you recommend sealing?

[@66935brent]

In my personal experience, no. 651 makes an amazing bond.