You Will Thank Me All Your Life! Easy Way To Refill Paint Spray Into Like New

[@GausDIY]

Hello friends! After watching the video, please leave your feedback to help me improve the quality of the next videos. You can use the subtitle button to view the translated text to help you better understand the video content. Thank you very much!

[@TricksDIY1976]

I like idea ❤

[@donrotino4577]

Just buy a new one!

[@PinePondCTDevilsHopyard-fy3hj]

The epoxy and nut will pop off before a can explodes. Other videos have pressure, but you can put some air in and try it, adding more as needed.

[@RouiguiMestata]

Q P. Oh nvm Bibb 19

[@juanveraballesteros4236]

Absurdo vale más el material que el mismo aerosol ,con un pincel ya hubiese pintado y la pintura ya está seca después de tanto tiempo que lleva organizarlo y darle uso

[@fm00078]

Did this in the late 1960s. #1 problem is using ambient air in the can, the paint will skin over inside. Use Co2 to fill the can.

[@PinePondCTDevilsHopyard-fy3hj]

Good point may need to drain and rinse every time. Like a tool, ready to use.

[@alcad3209]

Did you try azote?

[@michaelhsw.2018]

Zuviel Lack gesoffen?

[@fm00078]

@@michaelhsw.2018 It's called SNIFFING, not drinking. And no, never. Only brainless do it... to be more brainless.

[@geraldzuckier]

A lot of commercial products use butane as a propellant but that's probably hard to find in quantity; I wonder if propane would work? Yes I know it's dangerous, but as I said, a lot of commercial products use butane as a propellant and can be used as junior flamethrowers, as you see in movies.

[@CreativeTopTrick]

You did a great job, the idea is very smart and creative. Paint bottles are reused in a very effective way, I'm a big fan. However, when loading paint into the tank, you use a pump to create pressure. You should choose one with a pressure gauge to control its critical pressure, otherwise it will cause the tank to explode, which is very dangerous.

[@diggy-d8w]

Yeah, w/o knowing what the operating pressures of these cans are it might be somewhat dangerous to use them? Also I find that the spray nozzles are often so bad during the 1st use of painting that they won't get better the 2nd time around? I'm sure you can clean them or replace them but there's got to be a balance point of how much time/trouble(money) when compared to buying a new can of paint? But the operating pressure needs to be known, or close? peace

[@GausDIY]

Thank you for your tips!

[@diytoptricks]

This video is incredibly helpful and informative! The clear step-by-step instructions made it so easy to follow along and successfully refill my paint spray can. I appreciate the attention to detail and the practical tips provided throughout the video. This method not only saved me money but also taught me a valuable DIY skill. Thank you so much for sharing this with us. I look forward to trying more of your DIY projects!

[@diggy-d8w]

Hey Gaus, I was only speaking of what I personally might have as a concern, the idea is surely a great one with a lot of potential & I even grabbed the video to attempt it. I was hoping you knew how much pressure this can can handle so that no one overfills the inert gas they chose as a propellant? It's a dynamite idea that's way past it's time. Thanks for sharing it. peace

[@LiuDienNuoc2024]

I think so

[@carlosdanger1843]

Well done. Thanks for posting this! As others here have posted, remember several things: Not everyone has available supplies to just ‘go out and purchase’ the correct disposable paint cans. Not everyone has the money to buy them even if they were available. Finally, things will not always be as they are now for you…so, learn how to make do and solve problems anyway you can if needed…sure, always be careful, but in an emergency, you do what you have to…not just with paint…but with whatever you have available.

[@joseguerra6871]

I think that fellow has way too much time on his hands.get a job

[@adelker4884]

I think the principal consideration is SAFETY. I've read two comments pointing that out and we all should thank them for that. I aire the creativity of the video maker.. very intelligent, indeed. Just remember the importance of knowing the amount of pressure the spray can can take.

[@mrhyde3029]

In what kind of an emergency would anyone yell, "Quick! Make me a spray can!"?

[@MegaYoyojojo]

While I find this interesting and creative….I believe I could walk to the hardware store and back in less time with a new can of paint!

[@BenhamicheMohamed-pt7kc]

ماذا لو كنت تريد لونا محدد و لا يوجد في السوق ، أي عليك ان تخلط الألوان بنفسك ؟ 🤔

[@richg.684]

I think it’s a good idea if you need to blend a specific color. Just be careful not to over pressurize, you can always add more as you spray.

[@LaxminarayanaErroju]

❤super Idea❤

[@AljiriAlji]

From algeia . Very good and vers useful idea. Thank you. God bless you.

[@eduardomendoza5002]

Felicitaciones por tu gran idea me gustó mucho el vídeo 📹👍

[@jamesnirmaka5454]

A very cleverly constructed idea usefull for some of us.Thankyou James Nir Maka Papua New Guinea

[@tuheur-tk4ju]

du Québec ,Boisbriand merci pour la vidéo

[@Mikescellini]

Wow!! Incredible!! Very cool 😎 thanks for sharing this!

[@lisiatepalu7737]

Thankyou for sharing is very useful and save money Thankyou 👍🏼👍🏼👍🏼👍🏼👍🏼

[@GausDIY]

Glad it was helpful!

[@유홍도-q8u]

도고

[@HunterAvenger]

Eres lo máximo brother!!!! Gracias!! Thank you very much!!!. Dios te bendiga!!!♥♥♥♥

[@ゴリラクリソツ]

天才だ👏👏✨✨ これはすごい！！

[@MouloudBERRIAHI]

Bravo très bonne astuce.

[@GausDIY]

Thank you!

[@mauriciorogel9308]

Saludos amigos desde El Salvador bendiciones.

[@GausDIY]

¡Hola, que tengas un buen día!

[@juliusmangeni2372]

Best and most simple hack so far... can't wait to try it out.... thanks

[@sunnyacademy1249]

Nice work, thank you, Mohammad Ullah from Bangladesh

[@GausDIY]

Hi Friend! Nice to meet you!

[@DIYTechTrends]

Great ideas ❤ thank you for sharing 🎉

[@Marc-r8x]

Órale,muy bueno 😊😊😊

[@joaoleaolyrio9217]

... quanto trabalho, sujeira etc por uma coisa tão barata . . !

[@paulwong2888]

That's called DIY, learn a lot more by doing something practical instead of otherwise!

[@paulo7874]

Barata nada tinta spray e caro, com essa ideia dele pode comprar o galão e pintar no spray

[@dennism7813]

alternatively, get an airbrush kit. Cleaning would be much easier and efficient. Just a thought!

[@GausDIY]

Of course buying a new one is easy, but holding a paint pot that you made yourself is very interesting and enjoyable.

[@almendrasrendal8836]

Watching from iligan city

[@fasterdon]

Where do you buy the liquid paint from to refill the spray can? great video, I'm up for trying this if I can find an outlet selling the colour of paint I need.

[@johnroberts3723]

Excellent thanks.

[@عصامعزت-ن1ث]

Very good ❤

[@GERARDO-e6i]

Cuántas PSI le pone? Cuál es el porcentaje para diluír la pintura? Me pareció genial el reciclaje. Muchas graias

[@carregandoperfil2353]

GENIAL, MAGNIFIC, PERFECT VERY GOOD valew o meu Like

[@magomatteo]

What king of paint you put inside and can you put a link where to buy it thank you and for the bi component you utilize too

[@DavidTermini]

Nice video,would be nice to know the mix for the paint.I would guess oil base thinned with naphtha or mineral spirits

[@PinePondCTDevilsHopyard-fy3hj]

Very important. Need very thin paint.

[@patricebianchi4228]

Bonjour de France 👍

[@JoseSantos-lx8cs]

Good ideia. Mas é preciso aprender a pintar 😅.

[@nitrot.2195]

Thats a great solution thx

[@GausDIY]

Thank You!

[@LuisCastillo-em5bp]

Que buena su idea saludos desde panamá 👌👏🇵🇦

[@gregorydryden2272]

What was that powder that he used to seal tube in the filler bottle?

[@GausDIY]

it's baking soda

[@JohnnyU9999]

Merci beaucoup! Formidable!

[@JOSEOviedo-ll3qz]

Lo bueno es que una idea te lleva a otra idea si sos creativo asi te vas perfeccionamdo gracias por esta idea Amigo

[@GausDIY]

Muchas gracias

[@roypeekay]

How much pressure? Very important point you left out. The can could burst causing severe to fatal injury.

[@Cyber-Crime-FBI]

50-70 PSI - 100psi MAX

[@eduardomederos5741]

interesting, you are very creative, that tube only comes for a certain amount of pressure, one or two fills can be useful, but it is not for permanent use, you allow it for a long time.

[@vijayakumarnatarajan5392]

மிகவும் நன்றாக இருந்தது நன்றி It was so good, Thanking you

[@DelioantonioRestreporestrepo]

Exelente esplicasion señor profesional felicitaciones desde Colombia

[@paulseyres2663]

Thank you how many bars with the pum?

[@小松源助-x5d]

Good job. The position of the excess glue around the valve at 9:21 and 9:26 is different. That means there are clearly two spray cans, one before and one after use.

[@PinePondCTDevilsHopyard-fy3hj]

Waiting to enjoy your KZbin tips and hacks.

[@1945temo]

Good work, however I want to see how to fix the can that the spraying button/valve got broken while the can is almost full.

[@PinePondCTDevilsHopyard-fy3hj]

Try taking the button off and put it in a small cup with lacquer thinner, add the can upside down to the cup. Let soak for a few hours or overnight. Reassemble, warm in the sun. Guess this will fix almost all.

[@gianhernandez4636]

Anyone try this? I like so much!

[@PinePondCTDevilsHopyard-fy3hj]

Just do it, bet you have many cans to try it. 😊

[@Harold-si7eh]

Why you should consider buying online a refillable auto body shop spray bottle Or a can version with a air pressure valve they are cheap compared to the hospital bill for picking out the metal in your heart or head!!! ElCheapo is not the way to Die!!!

[@PinePondCTDevilsHopyard-fy3hj]

Perhaps in his and viewers part of the world, the shops are not available. Add some air, try it, adding more as needed

[@telwood15]

Keep the air pressure low eg 50 -90 psi and there should be no problem.

[@packrcch]

the top valve and spray head have always been the reason why i got rid of partial cans.

[@hanymagdy2095]

May Allah light your way, I bought a foam for shaving the beard, but it's clogged. What should I do? Thank you.

[@JoseMariaRangel-q8g]

Muy bueno tu video yo haría un pequeño aporte. Yo le pondría tuerca remache

[@PinePondCTDevilsHopyard-fy3hj]

Good idea, we have some, but may not be available in his part of the world. No tool for the rivnut needed... A long machine screw, a couple of washers, two nuts, locking pliers and a wrench.

[@phil410p]

You can buy them cheap and you will know what air pressure to use.

[@PinePondCTDevilsHopyard-fy3hj]

Maybe in your part of the world. Most parts, stores are a long trip. No Amazon yet.

[@manuel78776]

Muy creativo ❤❤❤

[@GausDIY]

Nice to meet you!

[@Sanette-v3c]

I have a question, what can one do with a full can of spray where the the nozzle broke off completely. Its still full, scared the can will blow should I puncture it

[@swanseamale47]

Id suggest not puncture it. The paint will probably make a he'll of a mess if it's full. At the very least do it outside and wear eye protection.

[@pod2185]

Come si dice... " la spesa non vale l'impresa " 😄😄... si fa molto prima a comprare una bomboletta nuova... 😀😀

[@Fokon-yaka]

De plus, les éléments de remplissage et gonflage sont mal adaptés pour utiliser la "bombe". Plus judicieux de les installer à la base. Sans parler du coût des résines ! Beaucoup de bricolage pour rien car la plupart des peintures acryliques ou phase essence du commerce ne seront pas adaptées pour ce genre de pulvérisation.

[@PinePondCTDevilsHopyard-fy3hj]

Yes, traveling to the nearest store maybe four hours round trip. 😂

[@alfonsoramos1058]

Creo que esta idea es buena, si se piensa en retocar algunas partes del automóvil que se tenga que igualar el color.

[@joesoh0005]

What adhesive is that

[@cransaftvalve734]

The problem you introduce air with oxygen not CO2 that is inert with paint. Only is usefull one time. But good idea.

[@freddyreyes-sm9jy]

❤excelente informe

[@josewellington3808]

❤ Amei

[@TipsAndTricks2k]

I'm just wondering about the type of glue used, is it really strong enough to use? Thank you for the good video

Hi buddy, you can use J&B weld, it’s strong enough for this and so easy to find it.

[@alfonsoramos1058]

Sería bueno que indicaras cuantas libras recibe la lata. Gracias

[@celefra]

You should tell us the products you use: what glue, what powder, etc

[@Joe-mx5up]

GENIAL😇

[@KYLAKREATIF]

Good nice👍

[@MikeNkhoma-jm6uu]

Amazing

[@GausDIY]

Thank you! Cheers!

[@Mico-vpn]

Saludos desde Venezuela! Muy interesante! Genial! 👍

[@GausDIY]

¡Gracias que tengas un buen día!

[@ElZorroNocturno]

Para todos aquellos criticones (inútiles) que hacen comparaciones dinero,tiempo,peligro, etc etc al menos acepten y aplaudan a alguien que se tomó el trabajo de pensar y desarrollar un músculo que se llama cerebro y no desarrollar ese músculo que se llama lengua saludos desde argentina portense bien !!!

[@PinePondCTDevilsHopyard-fy3hj]

​@@ElZorroNocturnoYou are Exactly Right. Waiting to see all the critics ideas and KZbin videos! 😅

[@PinePondCTDevilsHopyard-fy3hj]

One of the great Venezuelans who stayed to enjoy their beautiful country! 😊

[@vincenzorosciano8820]

Ho una bomboletta che è mezza piena e non riesco a sbloccare l'uggello per la nebulizzazione, c'è una soluzione fai da te? Grazie

[@GausDIY]

I have not done that job, but in my opinion you should try pumping a little bit of aromatic gasoline back into the paint can but the pressure should not exceed 4 Bar.

[@vincenzorosciano8820]

@@GausDIY ci provo

[@LiuDienNuoc2024]

7:11 You do a great job with smart and creative ideas

[@markdicker686]

Congratulations... don't know why I watched this as I have a big workshop compressor and several spray guns

[@keefardin612]

VERY CLEVER BUT USE ALL THE PAINT IN THE CAN, OR THE AIR WILL EVENTUALLY MAKE IT DRY INSIDE THE CAN

[@EmilCovaci-o1p]

Buna dimineata

[@surrenderkapoikilu6722]

Aaah is it worth the effort

[@surrenderkapoikilu6722]

Of course I learnt something

[@iosifferencz5432]

Esti un bun inovator❤

[@GausDIY]

Vă mulțumesc pentru compliment, vă doresc o zi bună ❤️❤️❤️

[@adelker4884]

Copy of a comment I wrote within the comments-- just to make sure everyone can see it. I think the principal consideration is SAFETY. I've read two comments pointing that out and we all should thank them for that. I aire the creativity of the video maker.. very intelligent, indeed. Just remember the importance of knowing the amount of pressure the spray can can take.

[@RubenACaezza]

cuando quiera sacar el tornillo con pintura seca en la rosca veremos

[@nowayout5249]

Perhaps I'm stupid, but I just had to watch this until the end. You sprayed paint on a piece of scrap wood that was on some of the most beautiful tiling I have ever seen - some of the spray must have gone on the tiling and I'll bet you didn't bother to clean that off!!!

[@TechnoViking2]

Verás qué risa cuando le estalle una de las veces y quede con toda la cara llena de pintura 😂

[@GausDIY]

Si eso sucede te lo haré saber! 😁😁😁

[@TechnoViking2]

@@GausDIY jajajaja espero que no suceda nada de eso amigo 😄👍

[@PinePondCTDevilsHopyard-fy3hj]

Sorry, he is not using that much pressure. Just put enough into try, you can always add more.

[@sunartorusli5493]

psi for the can?

[@GausDIY]

I use 4 bar

[@docteurmamba2395]

the face of your mom when she will look at what you've done with her nice table :(

[@eduagu]

Mientras corría el video, fuí y compré otra lata de pintura aerosol, ahorré dinero, tiempo y todo permaneció limpio. Lija, pernos, pegamento, lima, guantes, bencina..😅😅😅😅

[@PinePondCTDevilsHopyard-fy3hj]

Yes, but a four hour round trip to the store may be difficult for many in the world. Let's see your tips and hacks in your KZbin videos😊

[@fabioscandurra8831]

Complimenti per l’ottima idea. Grazie

[@manoelferreiradeoliveira2145]

Excelente ideia! 💡 👍💡 💡 💡 👍💡As pessoas dos comentários contra, pode ter certeza que são as pessoas quê vendem Splay.! k😂kkkkk🤣k!

[@carlossuazo4549]

Lo sigo en comayagua honduras

[@carlossuazo4549]

Muy interesante proyecto

[@frankyvee1]

Should have sand off the paint first before drilling a hole. Also can get by with just drilling one hole

[@JarekC250]

Ciekawy pomysł tylko czy opłacalny ?

[@motorratonaful]

Excelente idea para pintar cualquier cosa y yo votando los tarros de aerosol....

[@henniedevilliers7570]

Consider the difference of a about 10 plus cleanup time; more minutes of your precious time at the cost of a can of spray paint. Your choice.

[@fernandohectorlujan-4555]

SIMPLEMENTE GENIAL.‼ ACÁ EN ARGENTINA CON NUESTRO EX-SIMIO PRESIDENTE..... UN AEROSOL DE PINTURA NO ESTÁ CARO: ESTÁ CARÍSIMO...‼

[@balboa8694]

Seguro que era más barato antes...

[@danielguevara7555]

Cuántas libras de aire hay que agregar y cuál es la medida del tornillo

[@GausDIY]

Bombeé aire una cantidad aproximada, porque mi manómetro estaba roto y no sabía el valor real de la presión. Gracias

[@BenHurKostsánszky]

Mega!

[@herteert299]

Trop fort

[@sergioferrer202]

Lo encuentro peligroso y es mucho lo que arriesgas..no olvidemos que lo que mata es la onda expansiva del aire..así que busca otra historia. Mejor

[@imadtahhan5321]

Is it possible to know the amount of air?

[@luistaborda7252]

Gracias por tu video 📹 pero por favor espliquelo en español y gracias

[@antoniorelupe8032]

Muy bien pero es más fácil y seguro estañar la tuerca

[@mondomuyo-ed9ge]

いいアイデアです。ガソリンのかわりに何かもう少し安全な物はありますか？

[@kanna1980]

a quanti bar/psi si puo' gonfiare ? ciao

[@GausDIY]

Provalo con 4 Bar

[@josegutierreztotesautt5358]

Excelente

[@GausDIY]

Thank you!

[@mrlee6910]

그냥 하나 사세요 ~ 값싼 스프레이에 너무 많은 공을 들이네요.. ㅎㅎ 하지만, 실험정신은 칭찬하고 싶어요 ... Just.... Buy one ~ You're putting too much effort into a cheap spray.. but I applaud your spirit of experimentation...

[@GausDIY]

Thank you, but i like creative work

[@gaetanozuccarello9802]

☺️😉👍👍👍