@@chunguyen6928 No! He is just very small, that vise is normal size!
@jasonwaterhouse502 жыл бұрын
I took my dad's massive record vice out of his shed and put it on my bench and the bench tipped over lol
@user-cd9ud4xu1q2 жыл бұрын
после такого ремонта насос как не работал так и не будет работать . А вот Тиски знатные килограмм 200 точно весят
@fainderskurs-koi87672 жыл бұрын
После наждачки, пофиг, где стояли плунжера. Нам работа не важна, главное процесс.
@bubalom2 жыл бұрын
Радует что люди понимают этот филькин ремонт, ато все молодец, красавчик, за такую работу у нас бы морду давно набили))))
@fainderskurs-koi87672 жыл бұрын
@@bubalom Этот насос покрасят, и продаван вам втюхает, как Оригинал. Так что, с точки зрения бизнеса, чувак молодец. Так и нужно делать.
@user-yh6dr9jn4x2 жыл бұрын
У них всё так ремонтируют, на коленке, на земле.
@fainderskurs-koi87672 жыл бұрын
@@user-yh6dr9jn4x Ты в гараж на завод зайди и глянь. Упало, обтер о штаны и поставил.
@stuka972 жыл бұрын
"Amazing Skills" is a bit of a stretch I appreciate his hard work ,But he basically just took it apart washed it in gasoline and reassembled.
@aneeshkd5392 жыл бұрын
😂aaAa
@andrewcourt51562 жыл бұрын
And if it was in the US, the “amazing skills” would be how fast the repairer would be in cutting you an invoice for a replacement one!! Spending 30 minutes to dismantle it etc would just be too long for the repairer to go without a donut break
@integr8er662 жыл бұрын
@@andrewcourt5156 And this pump will not work any better when he is done than it did before. I am all for remanufacturing it, but he didn't hone the bores or replace the pistons, it still leaks.
@btwbrand2 жыл бұрын
@@integr8er66 While this is just a disassemble. polish, reassemble video, The problem could have been a leaking gasket which was replaced in this video and no further repair is needed.
@piotrp.36542 жыл бұрын
And final pressure test accomplished 😅😅
@bullhippo90232 жыл бұрын
I am not sure what he did other than undersize the pistons and put it back together with the old parts. If it works for them great? I wonder how they do medical surgeries in that country ? Possibilities are endless, lol
@MattRogersdesigns2 жыл бұрын
Currently, only 20% of the country’s population has access to clean drinking water. The remaining 80% populations depends on polluted water primarily contaminated by sewerage (fecal, total coliforms, E. coli colonies), and secondarily by fertilizer, pesticides, and industrial effluents (Daud et al. 2017; Sahoutara 2017). Such water pollution is responsible for approximately 80% of all diseases and 30% of deaths (Daud et al. 2017). He took a part that was not working well and made it work better with near zero monetary input. Would you rather do that and buy water for your family, or go thirsty?
@bullhippo90232 жыл бұрын
Your response is way beyond the text of the conversation. The conversation was about the content of the work performed, not a social issue. If you like what they are doing, you should send all of your things to them to work on. I am sure you would be very happy !
@chunkyfecalbreakfast2 жыл бұрын
@@bullhippo9023 have you ever seen someone actually quote a sauce on KZbin before though? I feel like we’re at least moving in the right direction now 🤣
@user-qk9tq1rt7o2 жыл бұрын
Im betting the balls were oversize to seat in a different spot after undersizing the pistons Funny, how he never noticed the chunks missing between the bores of the plunger body and didnt touch the check ball seats. But he did measure the check balls, threw one away and still had enough for the pump.
@user-iv3np8pm1f2 жыл бұрын
Проверка плунжерного насоса индуской ладошкой просто умиляет.
@swatcat79282 жыл бұрын
Open the pump.. wash it.. close the pump... it's refurbished now.
@DJHONOPRKDJH2 жыл бұрын
Hi
@qualiamaxwell63052 жыл бұрын
Hahaha got u man
@MattRogersdesigns2 жыл бұрын
To be honest, a lot of equipment that we throw out in the Western world needs nothing more than some cleaning and a light polish of its moving parts to keep working. If there was a single stuck piston in that pump, it would not work. That could be caused by some old varnished oil, or a piece of dirt. Clean it out and you are good to go.
@DSKILLS922 жыл бұрын
This is preventive maintenance not repairs
@coolguy24752 жыл бұрын
Lol this wtf they act like this shit is difficult. Also, I never failed a pressure test after a valve "refurbish" but normies on here wont understand how "amazing" that is to do.
@fanacm52 жыл бұрын
Наждачкой по плунжерам... Больно смотреть.
@user-yh6dr9jn4x2 жыл бұрын
Ему пох, дядя показал так делать.
@vindenisel77602 жыл бұрын
Главное шарик промерить, а то что плунжера наждачкой ничего😀😀😀
@DJHONOPRKDJH2 жыл бұрын
Hello
@AhmedGashimov2 жыл бұрын
@@DJHONOPRKDJH Hi mister! how you live?
@MONTES2620112 жыл бұрын
Respeto absoluto. Grandes mecánicos
@WowThings2 жыл бұрын
Gracias por ver.
@joelzacarias55682 жыл бұрын
Parabéns , povo dedicado e trabalhador , abraço do Brazil
@irvingcm582 жыл бұрын
Another good video. That's the biggest vice I've ever seen.
@salafkamanhaj94162 жыл бұрын
Jazakallah Khair bhai
@great4732 жыл бұрын
станочный парк содержится в классном состоянии - молодцы
@holgieselchen70332 жыл бұрын
Я ничего не понял
@fainderskurs-koi87672 жыл бұрын
Да, тож заметил, станки чистые. но подубитые. или походу, жесткости на токарном никакой. В прошлой серии, сороковку отрезать не мог. Скавчало всё, шо пиндец.
@avj46912 жыл бұрын
Still waiting for the repair to be shown 🤔
@sidwainhouse2 жыл бұрын
So he cleaned a pump then ran dirty oil through it, makes sense...
@lesbender2362 жыл бұрын
Don't forget, he increased the piston clearance in the lathe and did an output test as well!
@TheDutchShepherd2 жыл бұрын
He makes a pump work with $ 1,73 worth of tools. You couldn't make a pump running with a 100 times that, in a snap on equipped workshop 🤡
@X786BBF2 жыл бұрын
@@TheDutchShepherd Burnnn
@anon125492 жыл бұрын
@@TheDutchShepherd the pump maybe works for a few hours and will cease to function. its like watching children play with toys.
@user-uy5fb3rw2c2 жыл бұрын
Чтоб Вас так дети любили ,как вы этот насос отремонтировали
@jcjc15602 жыл бұрын
the workshop is not bad. it is well equipped and clean
@nopelindoputraperkasa58692 жыл бұрын
Wow amazing skill my friend 👍 thank for sharing 🙏 the best hidrolik skill 👍👍 greeting from Indonesian traditional gold finder,⚒️⚒️🇵🇰🇵🇰🇲🇨🇲🇨✋✋👍
@WowThings2 жыл бұрын
Thanks for visiting
@a2fer45yu22 жыл бұрын
Выкручиваются как могут конечно, от безысходности, но сдаётся мне насос будет работать ещё хуже чём до переборки. Это не ремонт конечно. Разобрать, помыть солярой и собрать. И разве плунжерные пары переставляют так между собой, от балды? Откуда вынул плунжер, туда и ставить надо. Хотя после обработки наждачкой пофиг уже. Но думаю этот насос уже перебирали не раз и не два. Его может ежемесячно шаманят. Тиски конечно знатные, это да. Удивило наличие микрометра. Обычно ничего лучше подобия кронциркуля нет в наличии. Но что поделать. Была бы страна побогаче, не занимались бы таким мазохизмом.
@fainderskurs-koi87672 жыл бұрын
с чего ты взял, что главное богатство? люди работают, а не потреблятствуют. Да, насос ремонтировать, то нужно учиться. хотя этот и не сложно. А вот шарики, нужно было пристукнуть, а не мерить. Тисы наверно стальные. Бо подошва тонкая. Пацанаб на годик к нам, на повышение квалификации, там бы сразу супер-пупер мастером стал. Наверно и впрямь, с преподованием там туго. Похоже пацанчик, сам до всего доходит.
@TheAmd4812 жыл бұрын
У них микрометр там для антуража. Чтоб клиенту пыль в глаза пустить. Не известно, какая у него там точность. Да и какой толк от того, что им там что-нибудь померили. Дальше эти замеры никак не используются же
@RomanKorneiko2 жыл бұрын
Страна не станет богаче пока люди работают ради работы
@fainderskurs-koi87672 жыл бұрын
@@RomanKorneikoпральна, нахрена дома работать. Нужно ехать до Европы и заниматься сракомойством.
@_-BIMBO-_2 жыл бұрын
Ремонт хороший, плунжеры зажал в патрон без цанги или хотя бы разрезной втулки. Тех процесс соблюден. Шлифовка шкуркой сделана правильно, но я бы еще рашпилем по стаканам прошелся, слишьком уж они гладкие.
@wagonm.a.92762 жыл бұрын
Parabéns pelo trabalho rapaz, muito profissional. Abraços.
@WowThings2 жыл бұрын
Uau feliz em ver sua devoção por nós. Agradeço calorosamente por assistir.
@battlefield19422 жыл бұрын
Amazing skills xD
@mcroley5912 жыл бұрын
That’s a nice bench vise!
@richardhaugh50762 жыл бұрын
I love that huge vise!
@BobanVagene2 жыл бұрын
I guess the amazing skills part is that he didn’t have any springs leftover when he was done. Those shaft splines though….Yikes. Clamping the shit out of it in a lathe chuck didn’t do it any good either.
@kevinh39792 жыл бұрын
LOL
@bravodelta3083 Жыл бұрын
Very true, but I could *really* use that Uber-vice :)
@moskal-2 жыл бұрын
Очень удивил ремонт, когда увидел гидроузел, подумал что они сейчас наплавят металл, и на супер точном станке все подгонят до микрон. Эврика! мне нужно навести порядок в багажнике, протереть огнетушитель, может поможет и двигатель будет лучше заводится )))). P/S Очень понравились тисочки, в тисках можно блок двигателя зажимать от крузака, или мотик за раму. ))) А токарный станок чистый, ээх, мой бы кто отмыл до такого состояния))).
@fainderskurs-koi87672 жыл бұрын
та видел, какую отработку в насос льют, так шо на зазоры пофиг.
@naumanahmadtariq87172 жыл бұрын
It was pump service not repair
@king0cans2 жыл бұрын
Thats what I was going to say.
@yoppindia2 жыл бұрын
They would not open it unless it's broken(in that part of the world), so in my book it's repair not service.
@naumanahmadtariq87172 жыл бұрын
@@yoppindia well hydraulic pumps have oil which needs to be changed hence serviced.
@yoppindia2 жыл бұрын
@@naumanahmadtariq8717 he was doing more than that.
@naumanahmadtariq87172 жыл бұрын
@@yoppindia well the thing is whatever he was doing, we watched it. So was worth it.
@WBT7142 жыл бұрын
Excellent 👌👌
@user-hg5zj6du8n2 жыл бұрын
))))) до последнего ждал что из погреба достанет какой нибудь точный станок и выпилит плунжеры или гильзы))))
@denisnabiullin60182 жыл бұрын
Ага и допуски посчитает на коленке)
@user-xb7bo3fu5r2 жыл бұрын
Слева стоит английский станок шипман на нем спокойно делают плунжеры так что они не все показывают .
@davechapman77352 жыл бұрын
great work Sir. thanks for showing it
@WowThings2 жыл бұрын
So nice of you.
@pasbaanrehmat53582 жыл бұрын
Zabardast
@ism4rtg4mer2 жыл бұрын
Good job 👍🏻
@gavrishyura51652 жыл бұрын
Ха!ха Вотэто ремонт !высший уровень кидалова!
@tomasmatusek62922 жыл бұрын
waw first time i saw profesion tools in hands of any bangla man.
@nakedgoblin40902 жыл бұрын
Very nice good job brother !!!
@ReservedForFutureUse2 жыл бұрын
I have no idea what he did besides take it apart, clean the pistons off on the lathe, wash everything off with gasoline, and put it back together. He didn't even replace the gasket or grease the bearings.
@michael-dm2bv2 жыл бұрын
u are so smart u don't realize the diesel "greases" the bearings. it must suck to be an armchair mechanic...
@michael-dm2bv2 жыл бұрын
u realize a hydraulic pump is more o,rings than gaskets? Oh wait! ur an armchair mechanic!
@dangerkingston2 жыл бұрын
@@michael-dm2bv if you're running diesel through your hydraulic pump you're going to have a bad time 🤣
@michael-dm2bv2 жыл бұрын
@@dangerkingston - the tightest tolerances u will find are on a diesel injector pump. But u are clearly smarter than me. Ask anyone how wrong u are.
@michael-dm2bv2 жыл бұрын
@@dangerkingston hey! accepting apologies anytime! i was an ase certified master mechanic at 22 years old. 20 years ago. u?
@MuhammadDaudkhanTV1002 жыл бұрын
Awesome
@ghulamrasool95262 жыл бұрын
Masha Allah
@mayamaya20682 жыл бұрын
I love that vise
@miketsai752 жыл бұрын
Any good tool to extract the really tighten handle out from a Grohe faucet?
@randyjones57362 жыл бұрын
I wish youtube would let me omit from searches, anything with 'amazing', 'epic', or 'incredible' in the title.
@randyjones57362 жыл бұрын
without having to manually type - every time.
@colincrooky2 жыл бұрын
Each piston will be matched to its corresponding cylinder and they will not be interchangeable. Mixing them is bad practice. When undoing bolts on items like that they should be loosened diagonally and tightened with a torque wrench the same way. I would choose someone else.
@MrMaNueL65122 жыл бұрын
Like that vise!
@halfnelson61152 жыл бұрын
Wouldn't mind having a vice like that in my garage.
@alexts66212 жыл бұрын
Отдел ОТК на высшем уровне)))
@albertojurado48382 жыл бұрын
saludos desde mexico que bueno verlos lla se abian tardado en aser un video cuidense buen trabajo
@WowThings2 жыл бұрын
Muchas gracias por su gran devoción hacia nosotros. Mantente conectado para ver más videos.
@ericcny2 жыл бұрын
With what you cleaning the parts with gas or diesel
@diederka2 жыл бұрын
Its more a "cleaning" than repairing.
@mohdnadeem34902 жыл бұрын
Y pump prees machine ka h ya truck ka h bhijaan
@MaxmadV82 жыл бұрын
8:07 the vibrations from that can cause something called "white finger" you can get it from vibrational tools like a jack hammer. It will also make his wrist joints bad
@Ibrahim-wv5km2 жыл бұрын
Impact driver has left the chat…
@kingpower.2 жыл бұрын
Чудо салярка делает своё дело!!!
@seemkeds92 жыл бұрын
I just have to say, Jesus, thank you for being born in Europe.
@lakelife13502 жыл бұрын
Awesome skills and dedication. I’d hire him
@bigalsbash2 жыл бұрын
Soon be out of business then
@jayengineeringheadrepair73602 жыл бұрын
Sir gear pump riper ki vedeo bnaea
@orestespixen82872 жыл бұрын
What exactly did he repair?
@DJHONOPRKDJH2 жыл бұрын
😱😱😱good
@agustinhidalgo4052 жыл бұрын
Now thats a vise!!
@Petrochemtester2 жыл бұрын
That vise!
@nobuckle402 жыл бұрын
Interesting.
@alimbekirov92212 жыл бұрын
Работа походу бесплатная ,так чисто отработку в конце залили
@muneetster2 жыл бұрын
i declare pakistan as king of jugaaad and raw skill !
@broken19652 жыл бұрын
I need that vice WOW
@user-em5kl1qb2d2 жыл бұрын
Чет не понял ремонта , разобрать , промыть , почистить наждачкой и все?
@piperdoug4282 жыл бұрын
Just so you lads know i just had my pump off my NewHolland HW340 rebuilt and for that part alone it was $2,200 never mind tear down and re-install
@Twizter682 жыл бұрын
Yours probably lasted longer.
@simonmarshall38692 жыл бұрын
Looks young but doing that as a long term pro, and its a refurb. its mostly a clean.
@user-uw7gx9dp8p2 жыл бұрын
Херня это а не ремонт, ещё увеличили износ поршней наждачкой)))
@rusrus45242 жыл бұрын
Да там делают на отебись ))))лижбы работало
@tombrown66282 жыл бұрын
Some narrative would help people understand what he’s doing!👍👍
@user-jx7yt4tj7w2 жыл бұрын
جميل جدا🥰🥰
@alexts66212 жыл бұрын
кровь из глаз)))
@Necrodoxious2 жыл бұрын
Use lathe to polish, "amazing skill".
@excitedbox57052 жыл бұрын
He didn't even remove the dirt inside the housing. That thing is going to be in no better shape than it was before he took it apart after the first time it is run, if not worse. That dirt can now loosen and get between the bearings, which will destroy them. If he had at least used a wire wheel to clean the inside of the housing it would be much, much better.
@muhammad92112 жыл бұрын
Excellent skills and talent in Pakistan
@TheFeller15542 жыл бұрын
Compared to what?
@b2hol2 жыл бұрын
Love 🤗😍
@mike_13742 жыл бұрын
In which vehicle to they used this pump?
@ronchabale2 жыл бұрын
I like that vice
@J.J.BANJO.132 жыл бұрын
Es una auténtica chapuza de principiante
@WowThings2 жыл бұрын
Es una auténtica chapuza de principiante
@bayn85042 жыл бұрын
Только непонятно что он починил
@ebrahimajam92992 жыл бұрын
Nothing was repaired, looks like just take apart and clean
@EDDY59182 жыл бұрын
He actually undersized those plungers..
@wadem45032 жыл бұрын
'Clean'?
@cryptogenie012 жыл бұрын
Interesting
@jeffanderson16532 жыл бұрын
Wow, he can take it apart and put it back together again. I didn’t see any repair
@bangibangil4962 жыл бұрын
Hahhahaha
@bangibangil4962 жыл бұрын
Bench test they should put gauge on it to check if it gives right pressure.
@ig_easy_boy86002 жыл бұрын
👍
@jakethesnake8422 жыл бұрын
Look at the size of that vise!!!!
@babayaga38662 жыл бұрын
That's what SHE said!
@king0cans2 жыл бұрын
That vice is awesome
@user-vr4dn3pv7p2 жыл бұрын
У них каждый второй токарь))
@TheVladenko0072 жыл бұрын
This is not an amazing skill. This is a normal repair.
@jeepcj7dude2 жыл бұрын
NEVER use a rag on a lathe............... I closed my eyes :)
@nebezgreshniklyuzepferov87092 жыл бұрын
ачётакможнобыло? Я так понял, что это распределитель. Плунжера....Наждачкой....в станке.... а потом в тисках....Там класс точности не менее 20
@aparecidamartins10422 жыл бұрын
👏👏👏👏🙏
@SkinnyCow.2 жыл бұрын
how many newtons for those bolts? about that'll do
@thefreedomguyuk2 жыл бұрын
Yes, that's for the small bolts. The big bolts need to be tightened until the thread snaps, then you back off by 1/8 turn 😉
@dineshbhaipareghi90632 жыл бұрын
@@thefreedomguyuk ojas
@dineshbhaipareghi90632 жыл бұрын
@@thefreedomguyuk ojas
@ashkay7802 жыл бұрын
When one has skill they can feel how tight it should be and not require a torque wrench 😁
@markakhurst36112 жыл бұрын
Didn’t even change the gasket or the seal! Or is this classed as routine maintenance?
@robertsmith35182 жыл бұрын
When his long sleeve shirt and the spinning chuck become intertwined , he need to learn how to use his arm as a flipper , Pump repair will be just a memory . Not the brightest lad
@Laffkin2 жыл бұрын
There was a video of some factory worker here in Russia who used to use sandpaper to clean the surface of the billet working on damn big lathe. Well it worked for him 1000 of times but failed on 1001th. It scary af, tbh. I think you only see more or less young dudes for a reason. Old lather operator would respect PPE and safety rules.
@jasonwaterhouse502 жыл бұрын
Pissin myself when I read this Robert smith
@rmmmodifikasi2 жыл бұрын
👍👍👍
@fratageeu24662 жыл бұрын
From mustache i can see he is competent.
@almas.31222 жыл бұрын
☺
@user-fh1tx3vu5u2 жыл бұрын
Юный Скайуокер собирает гравицапу
@adrianbunyard60152 жыл бұрын
That's the biggest vice I have ever seen. It's huge.
@borivojetravica5692 жыл бұрын
No comment...but testing with used oil in the end, wins LoL
@SAMETELMACI2 жыл бұрын
is that air conditioner clima pump
@thebosscatman72 жыл бұрын
the biggest vise I have ever seen
@alemao76502 жыл бұрын
CARAMBA !! MEU AMIGO !! NÃO BOTEI FÉ NO TAMANHO DA MORSA DOS CARAS !! HEIN??? A BICHA É GIGANTE !!!kkkkkkkk
@badlanz86422 жыл бұрын
If there was anything wrong with this thing …..what he did didn’t fix it