Your Everse 8 Questions Answered

[@JaronClark]

Literally the most informative video I have ever seen for live performers. Totaling going to steal this setup.

[@aaronthedj12]

“Whatever This Is” is a great show!

[@fretwiz1]

So, the two mics connected to the first Everse will be sent to the slave, either panned or mono. BUT, how do you get the third mic, connected to the slave, to sound on the master Everse?

[@FernandoHenao-gd4io]

It sucks you cannot pass a mic signal in input 1 or 2 to the other linked speaker. It defeats the purpose of linking the speakers via bluetooth. You have to use XLR. For ceremonies, we set the speakers at a distance and use both music as well as mics.

[@privat5316]

I am using this speaker for wedding ceremonies and I am anxious about possible updates during gigs. I am not using the app. Will there still be updates? I fear that the speaker suddenly stops working. This would be embarrassing. I wonder, if I should return it, although I really love the sound..

[@davidrodrigurez6431]

The Cable that comes with Tray for Everse can it Be connected to a Shure wireless Mic to power it up from Speaker

[@anhy10ful]

I would like to know this as well

[@KeokiPalacio]

I’ve got a global question on the Everse 8, 50m, and the 30m. It’s concerning the Ev app. Is there a way to have the speaker delay function on mixer mode. I tried setting the delay in basic mode, and hoped when I switched into mixer mode that it would hold. It didn’t. I’m guessing nothing will hold, if it’s not available in that mode, when you switch over. Unless I don’t have the current firmware. I wanted to use a single 50m/30m and place a everse8 down range, with delay.

[@graybentley]

THANKS FOR THE INFORMATION

[@gordibito]

Can you make a video about the foot switch input? Does it have to be a TRS cable? Is it just a single function input? Thanks.

[@jeffmilkey]

When you make adjustments with the App can you then Store that preset from the App?

[@easyclean21]

Ev went ahead of the game on this 1 son nice reviews brothers

[@alexissanchez6218]

I listen to a lot Latin music with a lot of bass (reggaeton) and I haven’t been able to get a good EQ setting for a good and clean sound!???

[@psydoc2871]

Hi I an EV-8 and wonder what’s the latency on it? What kind of Codec does it use? This particularly important if there are items connected by wire and one by Bluetooth. If the latency period is long there is going to the lack of sync between the two inputs.

[@zanick2]

why does the application seem to crash when i am just loading a configuration. i go to the recall function and the 4 i have stored (6 available) show up and immediately the spelling changes to abreviated letters and all the configurations go to zeros. all functionality saved is lost. this has happened 3 times. once at the end of the gig.. no problem as i was only going to do one more song.... and then just now. so, i took screen shots of the configurations and now have them for back up, but still takes about 30mins to put all the values back in for the 2 guitar settings i use with either the EQ or PEG set ups. please someone give me a hand.... if this happens at a gig while changing configs, im DEAD MEAT. can you store configuration any other way, so the phone is not the weak link? can you have the same configurations on another back up phone?.. is it stored on the phone or in the box? could the phone be driving the crash , so that a secondary phone with the configs could link up and restore the settings?

[@_momusic_]

Could you use the everse 8 as a mixer and connect one or two ev50 to it via mix out?

[@carterleynes6380]

When you set this up with its output going into a subwoofer, does it apply a highpass filter to itself? Or is the Everse 8 meant to connect to the output of the subwoofer?

[@NukePooch1]

The highpass is switchable in the Everse menu. No filtering is applied to the output...so the sub will low-pass itself.

[@markritzi9728]

Got my new everese 8 and master control knob didn’t work not happy sending it back

[@djjason868]

Hi, does the everse 8 has a delay function?

[@djphillmp]

How about a battery-powered sub? Ev everse 12 sub

[@davidstephens820]

Hey, how bad is it to limit on these speakers? Someone said that Everse says you can safely going 6db into limiting. is this true? thanks

[@IamFilyPerez]

When mixing out to a 2nd everse, do I run the 2nd everse in basic mixer or basic?

[@thomasheath6029]

Can my Audix system fit on the top of it?

[@ZackPomerleau]

Curious about the limiter. I’ve heard from many people EV has a limited that limits before peak? And because of their DSP and limiter they are extremely safe. I’m wondering if the limiter flashing several times a song is a bad thing or not?

[@NLFXpro]

Our friends at EV said the limiter allows about 6 dB of headroom, so if the limiter is flashing it's more of a warning that you're about that far from peaking. Hope that helps!

[@ZackPomerleau]

@@NLFXpro that’s killer info. That’s a huge amount of headroom so I imagine it’s safe for it to have some limiting at times. I’ve never even noticed the sound of the limiting honestly!

[@creepitogamesftw]

@@NLFXpro I dont understand This.

[@creepitogamesftw]

@@ZackPomerleau can you explain that pls?

[@ZackPomerleau]

@@NLFXpro will the system inform you if you’ve hit above that threshold? I personally haven’t gotten anywhere close to the stated volume so I’m curious if maybe it’s just super early limiting.

[@949studiodj3]

will the usb-c charger charge a macbook (via usb-c)? thanks

[@mario.nascimento]

What is the everse 8 RMS power?

[@johanndebeers1024]

I bought two speakers and im very angry, but is no possible to connect one microphone to one speaker and have sound on both speakers, when u are speakers with Bluetoot connect will.

[@KeokiPalacio]

I have a question when linking 2 Everse8’s, will the app allow the slave speaker to clone all the eq settings on the master speaker? For example the main 7 band eq, and all preset filters, Club, Tripod and stuff. Just something I ran into. Thanks

[@NLFXpro]

It will not clone the master speaker, however, there is an EQ for the "system" of speakers linked together within the app.

[@KeokiPalacio]

@@NLFXpro i figured it would be cool to have your settings cloned to slave, it would save a couple steps.

[@xennialmusic]

Similar question to that, can the inputs from both speakers be used in combination when paired wirelessly together, so you would go from 4 to 8 inputs using 2 EVERSE 8's, so you would essentially have an 8-channel mixer with 2 mics, 2 guitars and 2 stereo inputs for something like a keyboard or electronic drum set?

[@xennialmusic]

Sounds like that's a no based on the last question in the video.

[@NLFXpro]

@@xennialmusic the inputs on one Everse 8 will not be heard through the second Everse 8 and vice versa. Through the app you have 8 channels you can control, however when paired - only the music will be heard as stereo.

[@uthetuber]

When will the white ones come back in?

[@NLFXpro]

We've been told by Electro-Voice Feb-March of 2023. Contact [e-mail] to get one reserved for no money down (:

[@tomorrowtech]

Quick dose of reality guys. It's a point source speaker with a battery attached. It comes with a limited stereo mixer but cant transfer the mix to a stereo pair with its "true wireless" connectivity, only the Bluetooth stream? Wow WTF? A k8.2 with a velcro battery packs would have twice the power and better sound. So the only reason for the $750 price tag is to compete with the Bose S1 .. which uses the Bose proprietary sound dispersion design you either love or hate. Say what you will but that tech has always come with a premium. So EV comes along. .takes a typical point source speaker.. tosses a battery in it with a little more oomph in power over the Bose but certainly doesn't compete with just about any other point source speaker with a battery pack. So let this sink in.. this should be a $399 small battery operated point source speaker but since they marketed it against the "overpriced" Bose. They are charging $750 and most are falling for it. I am a fan of the EV 30m and 50m series, but even they don't even come close to column systems like the LD curve for sound, clarity, dispersion, etc. and the LD products are cheaper pound for pound.. although limited in support. Think about it? Also, how come a Harbinger MXL900 for $500 bucks can seamlessly transfer the integrated mixer stereo channels wirelessly without cables but EV's "True wireless" doesnt work with the mixer.. So much for the wireless stereo PA idea for any performers out there? HUGE FAIL.. its is seriously the stupidest thing i have seen in awhile as far as design flaws lol. Good luck. Yeah it sounds good for streaming in stereo but this ain't a $750 speaker period.. and at that price point.. covers are sold separately.. Really?

[@thomasheath6029]

Oh my goodness......

[@bittorapanut8989]

Fix your app pls

[@WayBackNowLetsGo]

Nice plug for your EXTRA accessories. Not help for anything else. ..Nice waste of time. Thank you!