Your Feedrate is Wrong - Fixing it with Mastercam

[@PAVANKUMAR-db8yv]

Pls send the M10 and m12 thread mill program how to generate in mastercam

[@icey_b1562]

Seems like "override arch feed rate" could be useful for chamfering when you're deburring small bores and longer contours in the same operation. I'm guessing Mastercam will calculate feed rates off of tool diameter and not the effective cutting diameter of a chamfer mill?

[@CamInstructor]

Chamfering with Contour will look at the cutting diameter for calculation not the nominal tool size. Pretty cool they have this working!

[@CNCMachinistEducationNetwork]

Your the Man

[@CamInstructor]

👍

[@nicks2154]

How about the circle mill tool path? Is this an option? I’ll have to look into it tomorrow.

[@CamInstructor]

Not yet

[@tuner453]

Can anyone tell me what cause the haas 3 axis milling gave me this alarm, when I make small offset “WEAR”.”cutter comp begin with G02or G03”postes from Mastercam....I was making thread milling and contour.

[@cncmanufacturingptyltd5189]

Cutter comp G42 and G41 cannot be called on with an arc move use start at center with a linear lead in

[@tuner453]

@@cncmanufacturingptyltd5189 could you make any example which line should I start on? thank you!!

[@CamInstructor]

What toolpath are you using? As mentioned above, comp needs to be applied on a straight move (G01). If using Contour, make sure your leads are set to use a line length. If circlemilling or threadmilling you can do as mention above again, click start at center but you may also need to click perpendicular entry to get that comp onto the G1 line.

[@tuner453]

@@CamInstructor it is very helpful and thank you very much!

[@cncmanufacturingptyltd5189]

With contour will it increase the feedrate if machining the outside of the arc using the arc filter settings?

[@CamInstructor]

Yes it will!

[@Dragon-cs2xz]

Would you give me link to download your kurt vise model please?

[@CamInstructor]

You can get them at Kurts website... www.kurtworkholding.com/

[@Dragon-cs2xz]

Thanks

[@policebox1092]

Awesome

[@CamInstructor]

Thanks!

[@muhammadparvez3929]

Hi please solve my problem mastercam 2020 very slow working how to my mastercam 2020 fast work?

[@CamInstructor]

Could be a number of things. Best advice I can give you without knowing more, update Windows and update your video card drivers.

[@Hani13ful]

This vedio is a waste 🤣

[@CamInstructor]

Why is that?