Haas HA5C 4th-Axis Demo - Haas Automation, Inc.

The HA5C is a great way to step into the world of 4th-axis parts. Index accurately to any angle or perform simultaneous 4th-axis contouring when hooked up to your Haas mill. The HA5C uses a 5C collet to grip the part and it's an easy plug-and-play connection to your Haas machine.
Here is the link to the HA5C Indexer web page:
www.haascnc.co...
Don’t miss any Haas videos. Click here: www.haascnc.co...
Need more reasons why you should consider a Haas? Check this out: www.haascnc.co...
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!
Follow Haas:
Facebook - / haasautomationinc
Instagram - / haas_automation
Twitter - / haas_automation
LinkedIn - / haas-automation
Code: JQMJZKRY8QKWC2RL

[@trainedtiger]

Not to be "That guy" in the comments, but I wouldn't be too proud of that as a demo... Could have done the whole profile with 1 end mill side milling to use the whole length on the end mill, including the slot and interpolating the hole, then drill and tap, then part it off with a Z downfeed while rotating A to leave only a tiny little .100" knub. With a cycle time for the whole part under 2 minutes.

[@mattgregory1239]

I think your missing the point. It's a demo of the rotary not how efficiently you can make the part.

[@spikeypineapple552]

@@mattgregory1239 funny how when DMG and Mazak demo different bits of their kit, they show amazing parts in it though. It’s representative of what they expect their customers to run,

[@matejkuka797]

@@spikeypineapple552 comparing machine with price tag aroung 300 000 with machine with pricetag 100 000 its not fair ;) Haas is best machine for that price ! And you can do soo many things like with DMG yeah there are some downgrades but not that much :P

[@spikeypineapple552]

@@matejkuka797 it's the programming that's cringe.i don't see why the price makes any difference to the programming

[@bobsbillets8863]

@@matejkuka797 A HAAS will do anything a DMG will do. It may not be as fast, but the limiting factor is how good the person programming the machine is.

[@Oyez10]

Y Axis live tooled lathe would be the machine to use for this part. That being said these little rotaries look great.

[@HDitzzDH]

Why are there so many negative comments lmao

[@redraiderrider3289]

Because button pushers like to think they know what they are talking about.

[@geewillikers5342]

First non negative comment!

[@huequeen8]

I love 4th axis like I love a horizontal.

[@umargul5644]

Great job sir thanks

[@정상인-i4k]

awesome! only 5minutes!

[@jonahwebb4352]

The fact that they put this out as a demo part says everything you need to know. Haas machines are what they’ve always been, cheap throw away machines good for non critical low tolerance work.

[@brandons9138]

You can get good tight tolerance parts out of a Haas. Just not for very long. They are disposable machines.

[@ChrisSmithCenterline]

I hold 10ths all day long on my Haas and in 2021 netted 12-13 x what I paid for it. This year I'm at 9x already. Haas leverages simple business economics. Produce a quality machine at a reasonable price.

[@heyspanky5695]

I make tight tolerance parts all day on haas. Are there better machines out there? Absolutely. But if you can't hold under a .001 tolerance on a haas then the problem is probably you.

[@josearigojacobojacobo1434]

Formidable 👌😃

[@timminnekhayrov8788]

Cool

[@josearigojacobojacobo1434]

Cuánto sale esta máquina? Es difícil aprender?

[@haasautomation]

jose, www.haascnc.com/machines/rotaries-indexers/indexers/models/ha5c.html

[@texasermd1]

Great video. Could the final tab be cut a little more for easier removal? Also, I personally could do without the manly-man-honkey-tonk-lets-get-rowdy music on every youtube video geared toward male predominate audiences. I completely understand the Advertising 101 deal. I just find it annoying. I'm here to see some cool stuff or learn something new, not toss back some shots of Jack and throw some darts with my buddies. My preference would be the machining/shop noises without the additional audio, but that's me. DATRON, for instance, may have a little intro audio but then it's just about the machine. 👍👍

[@erikslagter3231]

datron machines sound nice, Haas cnc's sound like chainsaws ;-)

[@texasermd1]

There's that too. LOL.

[@OakwoodMachineWorks]

That spindle does not sound happy at 1:24

[@spasticjackson9578]

I think it wanted more coolant.

[@OakwoodMachineWorks]

@@spasticjackson9578 before it was even in the cut it sounded more like a clapped out gearbox than a spindle

[@spasticjackson9578]

@@OakwoodMachineWorks I was joking about the coolant... the amount of coolant there was extreme, I thought it was funny. I suspect it was just an RPM change that made such a drastic sound. Cheers !

[@jasongreenawalt2632]

That’s what half of their machines sound like. Depends if you got one they decided to balance that day I think.

[@owievisie]

I think the belt that drives the spindel started to wear out. But yeah not a good publicity thing

[@darknutgaming5510]

Double podium in Spa

[@j.dietrich]

Seriously, what the heck is going on with the noise from that spindle? I get that it might just be a resonance in the sheet metal or something, but everything after the tool change at 1:12 sounds like someone threw a Skil saw in a washing machine. If one of my machines was making noise like that, I'd be calling a service tech.

[@hurttech7593]

I swear all HAAS's sound like this.

[@brianwaayenberg3099]

I think what your hearing is the belt drive. In mine anyways the motor is belted to the spindle. At high rpm you can start to hear the belt. A wining from the teeth engagement and a buzz if it’s flapping around. Mine was getting pretty bad for vibration and buzzing. Shimming the motor to improve belt alignment went a long way. But it’s a belt so it’s never as good as direct drive.

[@vasyanpro4567345]

удобно фаски снимать на нем

[@DPTech_workroom]

👍

[@marksgopane9396]

The noise on the spindle is too loud

[@ubtejas]

this product name and which are use industry full details please tell me

[@motoflyte]

Always put critical features in first before removing the bulk of the material...it helps maintain part rigidity. Also, you should be machining from outside in, not the opposite

[@joshualegault8641]

Not always. Things move around on certain parts and certain materials.

[@Whhhoo3_3939]

you are giving us great content on machining...........i have so much confustion about 4 axis trunnion parts that is not in center of rotary 4th axis. what to do then my part is off center from rotary axis?? what and how to take offsets of xy and Z..... we uses nx cam for programming..... programming is not issue ....setup is difficult..... kzbin.info/www/bejne/joa5gaBtgM6Jh80 .......we are planning this type of setup but we got confused to ho to take z ooset and xy offsets ......which codes for dynamic offsets in 4th axisgramming is not issue ....setup is difficult

[@rackdevelopment]

Dear god those chamfers look like shit, I get you're showing off speed but if you want to do an actual demo at least make it look good.

[@dford344]

After my dealing with haas I would never buy one.

[@davidlanger3295]

Cool