What you need to know about your Lithium battery before it is late. #inverter #lithiumbattery #solarinverter #solarsystem #solarenergy
Пікірлер: 49
@pythonx1002 ай бұрын
Correct it also depends on the number of cells in the battery
@smilinsunsmilinsun80562 ай бұрын
You are right
@ezekieloguno8598Ай бұрын
What about those using a hybrid inverter which has inbuilt charge controller...how do you know?
@adanbouzoua2 ай бұрын
Next time, remove the background music. Thx for sharing
@smilinsunsmilinsun80562 ай бұрын
Noted, Thanks for watching
@QCSACrashedToysSPR2 ай бұрын
Or at least turn it down about 50%
@johnvincent49938 күн бұрын
The music is cool; makes it relaxing. Without the music it would be boring
@linossinkala78402 ай бұрын
Thax boss
@smilinsunsmilinsun80562 ай бұрын
You are welcome Buddy!!
@abisaiamatalo27692 ай бұрын
Is that a Lead acid battery? Anyway, the quality of the product depends on where they bought the battery. I have seen some shady LiFePo battery cells which when measured don't produce any power (Zero Volts) and on cutting through the cells, i saw it was filled with sand. That is why it would charge and lose power quickly because half of the cells were fake cells filled with sand, so the configuration of series-parallel was being run by few cells.
@samthecreator10Ай бұрын
Wow! This is new information
@samisaac3908Ай бұрын
Is it possible to install different brands of solar panels to the same inverter for example Jinko and Africell panels together to feed the same inverter.
@smilinsunsmilinsun8056Ай бұрын
@@samisaac3908 Not a good idea stick to one good brand
@samisaac3908Ай бұрын
@@smilinsunsmilinsun8056 I was convinced to use Africell panels but later found out that Jinko is better. I wanted to buy Jinko for better performance. Is this a good idea?
@buikemm2 ай бұрын
My naija lithium lifepo4 manufacturer said I should charge my 24v battery tooth 27.8v. Na there I de so since. Though I'm thinking it's low, but wetin I fit do? I've to obey
@samisaac39082 ай бұрын
Very good video. But does the solar panels have to be the same brand with the inverter and battery?
@smilinsunsmilinsun80562 ай бұрын
No You can use any Brand of solar panel you want
@savageolatunde67312 ай бұрын
This can is serious. But if charge controller could overcharge the battery, what then is the function on BMS? i guess the battery cells has to be a substandard one or the bms is also substandard.
@smilinsunsmilinsun80562 ай бұрын
Whatch the video to the end your question was answered
@odoohub50102 ай бұрын
did the bmses inside those batteries fail?
@BonifaceEOboh2 ай бұрын
Well done Sir! Is this also applicable to Tubular battery?
@smilinsunsmilinsun80562 ай бұрын
No most Charge controller settings are correct for flooded batteries
@simonemmanuel97342 ай бұрын
Why is the setting not written on the manual for safety on each?
@smilinsunsmilinsun80562 ай бұрын
All the information you need is on the manual but most people don't read the manual. Reading the manual is one thing and knowing what to do is s another
@smilinsunsmilinsun80562 ай бұрын
Guys kindly support us by following us on Instagram @smilin.sun and Facebook @smilinsun , This is how you can support the work we are doing. Thank you so much.
@ifecook68142 ай бұрын
any after effects on staying in a room where Tubular battery have been stored
@smilinsunsmilinsun80562 ай бұрын
Depends on the type of Tubular Battery and the quantity of battery
@lukechilimina41712 ай бұрын
Can't you drop down the voltage setting on inverter to meet the charging voltage on lithium battery
@smilinsunsmilinsun80562 ай бұрын
Yes you can by going through the User defined option
@adeyinkadoherty89912 ай бұрын
Maximum voltage for lifepo4 is 3.65v
@smilinsunsmilinsun80562 ай бұрын
Correct
@Theoppositeofchaos2 ай бұрын
Hi I got a closed loop communicating on my batteries and my assumption is BMS will take care of everything am I wrong?
@luckyanayo23132 ай бұрын
For lithium battery without BMS
@tosinadegbesan2 ай бұрын
I have a question about lithium battery, though new, bought last week , but not really gotten enough charge , but the percentage of both battery are not same , one is higher than one. I noticed one battery is 18% while the other one is 9%. Right now they have 12, 550watts panel with 10kva and 20kwh lithium, no plans to charge with nepa at all. What do you suggest
@smilinsunsmilinsun80562 ай бұрын
There is a communication glitch between the two parralled batteries. They should all be charging and discharging at the same rate.
@tosinadegbesan2 ай бұрын
@@smilinsunsmilinsun8056 thank you , also bout the solar for charging, whats your advice
@theo23782 ай бұрын
Are they both charging with the same charge controller?
@smilinsunsmilinsun80562 ай бұрын
@@theo2378 3 Hybrids in parallel
@oluwoleodetola1626Ай бұрын
Please, how much did you get the lithium battery??
@Techtalker332 ай бұрын
What happened to the specification label on the battery sir.
@smilinsunsmilinsun80562 ай бұрын
Please kindly watch the video till the end the question you are asking has already been addressed
@Techtalker332 ай бұрын
You are correct... I dropped the comment before watching the video till the end. Lol
@ucheibe27512 ай бұрын
Thank you for the information on SPD. I really appreciate it. What is the formula for determining the size of each protective device, eg. between solar panels and charge controller, between charge controller and battery etc?
@smilinsunsmilinsun80562 ай бұрын
Not sure I understand, what battery specification
@smilinsunsmilinsun80562 ай бұрын
Tell us your experience about a Lithium battery set up, what has been your experience?
@Techtalker332 ай бұрын
It doesn't work that way. The bms handles the charging
@smilinsunsmilinsun80562 ай бұрын
The function of the BMS is not to select the charge voltage , that is the function of the Charging system. BMS can only try to regulate or protect.