Your next RC build needs this!

When you build your next scale rc truck, you absolutely need this accessory. The Powershift RC Deadman Switch is an amazing way to cut the power in an instant, and looks great too!
Get yours here at Powershift RC: store11415794....
You missed stickers! We had them, and now they’re gone again. We’ll make more in 2019! New Patches are available here: scalebuildersgu...
Thanks for your support!
► Merch available here:
teespring.com/...
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuilde...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
Buy my camera gear:
a6500 amzn.to/2LQfczG
16mm Sigma amzn.to/2v1K5I2
55-210mm Sony amzn.to/2Ox8woQ
Zhiyun Crane amzn.to/2LQY8cL

[@jeffreybentz7097]

Definitely a great idea, can't even tell it's there. Just don't lose your top between rounds LOL!!!

[@scalebuildersguild]

Definitely!

[@bigchungus-oj8zz]

I like the connector versus the magnet approach. Great upgrade. Love it! Even though they are not inexpensive, especially if i wanted to put it in most of my 49 rc vehicles...Thanks for sharing.

[@scalebuildersguild]

It's more of a "starting from scratch" sort of thing, I agree, but totally worth it to have a hidden switch.

[@TimsBitsnPieces]

Here in Melbourne Australia, myself and a lot of others that I am in a club with, build RC model sailing and steam boats and have put magnetic reed switches in our boats as it is easier to get to and can be built into a deck fitting or hatch of some sort..

[@scalebuildersguild]

Very cool!

[@johnnyutah6056]

I need to know where that scale mountain bike was acquired from? That is amazing!

[@kyleranderson5557]

Johnny Utah I suggest looking up “flix trix” or finger bikes.

[@4486xxdawson]

Ive always put a switch in , i hate removing my body just to shut my truck down ,,cool idea making an accessory as the switch though .👍👍

[@nuge74]

Great concept and execution! Nice simple design that makes life easier, good stuff!

[@scalebuildersguild]

It's pretty cool.

[@CaterCustoms57]

Well i know what im gonna get for my rc car when i start a crawler or overland build

[@575conbon]

A functional full size spare mount shutoff would be cool. A base that mounts to the bed, then the "key" part you pull out has the hex mount and stud for you to bolt whatever wheel and tire combo you want to it, that way it kills 2 birds with 1 stone. Also a full size tire would be harder to misplace...

[@scalebuildersguild]

Interesting idea!

[@nukedathlonman]

Well, I'm not into the competitive side of scale RC trucks, I do agree that the deadman switch is a great idea.

[@scalebuildersguild]

Certainly can be used elsewhere. I just think it's a great way to turn a truck off without an ugly switch!

[@ridef1rst]

I agree 100%. My uncle uses DMS's on all his Ho Runners.

[@BlackSmithRC]

Ho Runners,lol.

[@scalebuildersguild]

Yeah, what's a HO Runner?

[@nunodias3331]

thats cool for someone who likes scale acssesories

[@scalebuildersguild]

Yes. And in competition, why not take an item that adds points, and function. Makes sense to me.

[@5amskateboards291]

These are sic! Time to hinge the hood of the Honcho and find a spot in the firewall to mount it.

[@FullThrottleRC]

I had heard about these before but never really looked into them. Now that I'm getting more involved in the scale stuff I might need to investigate!

[@scalebuildersguild]

Definitely!

[@MWall711]

These are cool! GCM did a video a while ago for how to make a master switch which essentially is the same thing. After their video I put one in all my rigs ... but they're not as good looking as these!

[@scalebuildersguild]

It's a pretty cool idea, right?!

[@DFDuck55]

What a great idea! They must be selling like hotcakes since they are all "Sold Out" on the website. I could have used one of these when I had a Spektrum steering servo CATCH ON FIRE!! Though.. it did make for a cool video.

[@scalebuildersguild]

He must be doing well with them!

[@RalfIamrighttherewithyoubrothe]

Just watch the video I've known about this I was actually wanting to use it in one of my next builds you better tell Jonathan to step up his game because he is sold out of everything!

[@scalebuildersguild]

He's working on it as I type!

[@bigchungus-oj8zz]

Per usual, hard to find a time when parts ARE in stock. Sorry, I don't like to be negative. Great Products!! I just bought 2.

[@RalfIamrighttherewithyoubrothe]

@@bigchungus-oj8zz did you get the old style ones with the magnets or did you get the new ones with the xt60 plugs? One more question did you order from him on his site or did you go through a third party? LOL this is the last question I promise did you get the Jerry can a propane tank or the battery and if you did get the battery do you know if I can have the measurements on it or do you know where I can get the measurements on it thank you.

[@WRFxXBIGJONXxWRF]

Baskins is 1 in a million great guy great products

[@scalebuildersguild]

Sure is.

[@daver18qc]

I'm working on a hybrid of those two, a magnetic cover that turns on a reed switch (small magnetic switch) that in turn controls a relay to cut the power, that way even if the cover magnet moves a bit, the magnetic field is strong enough so that the reed switch will stay "on". Will put the design on thingiverse once i'm satisfied with the results.

[@scalebuildersguild]

Sounds neat!

[@ka4172]

Damned like Pinzgauer with the "first" original colour release in Austria!And the switch ,"the columbus egg" .

[@nicholasbarber4193]

The DMS units are awesome!!! Baskins is the man!

[@scalebuildersguild]

Sure is Nick!

[@timsvrider]

Great idea !

[@scalebuildersguild]

Sure is!

[@ninotocka]

this is a cool diy idea...

[@daynechua4755]

Good idea

[@Jeepy84]

I somehow knew this was what the video would be about, lol. Johnathan is a wiring wizard and a great guy.

[@scalebuildersguild]

Sure is. And probably one of the nicest guys in RC.

[@RccarsUK]

Nice concept...but $30 for what is essentially a $2 switch seems bit off..... Why not just wire in a $2 rocker switch inside the cab??👍

[@zanthraxnl]

Woah there, not a $2 switch, it's a $1 pair of plugs and maybe $2 of 3D printing filament.

[@jjkeaton7085]

Bro cuz that's not scale as fuck bro. Do you even lift bro? Hahaha

[@HarleyDesignsInc]

You need to flow high amperage thru whatever you’re using, so most small switches are much too underrated.

[@RccarsUK]

@@HarleyDesignsInc yes I see now.....as this is in main power line wires.. from esc to batt? Couldn't you just use your esc external switch pos and neg (if indeed your esc has one, like Hobbywing etc) as that's not in the main power circuit from esc to battery.... You could effectively use anything down to a 2amp rating. So this design is basically a plate 'switch' yes?? So in respect... Does not have an max amp rating as such...as its simply bridging the circuit by means of a small steel plate..? Quite clever really.... Simple... But effective. I still think its a tad overpriced... Despite the ingenuity.... The manufacturers will pick up this idea soon.... Or a similar variant.... May be prudent of power shift to register this... If indeed that's cost effective in your part of the world. Fims

[@RccarsUK]

@@blackvic5157 if I thought it was fair pricing I would of said so.... And you've misread what I said anyway.... I didn't expect him to sell his product for $2.... I also didn't suggest that you could buy an off the shelf variant of this exact product for $2 from China either... I simply stated the materials used in this product dont cost more than a few bucks... And as a paying customer I was just offering my opinion on the rrp price being charged..... So I'm not really sure what you're insinuating with that rant?

[@lylekehrer6159]

That's cool! I ain't into the competition stuff, but even just 'regular' people will find this handy. Times I pick up the folks' mail and park my Deadbolt by the steps etc.this will help a lot. Since don't have a truck, might get the Jerry can,maybe even for both Deadbolts!

[@scalebuildersguild]

There you go!

[@voodoostroker]

Cool idea no doubt about it

[@scalebuildersguild]

Sure is!

[@ArmanRC]

wow that really great concept for simple and esy for battery plug, thanks for sharing this great video tips

[@michaell3852]

Brown Out Central.... With the magnets

[@scalebuildersguild]

Odd, I never had that problem. Ever. Though I did hear some have that issue. I wonder if it's ESC dependent?

[@BlackSmithRC]

Awesome game changer for comp trucks and guys like me. MIDWID!

[@scalebuildersguild]

Thank you sir!

[@anibalbabilonia1867]

Very cool adition!😎👍

[@scalebuildersguild]

Thanks!

[@MrCaprinut]

I guess I'm too in the dark ages still, as I only use deans on my rigs. Think all the other plugs are too bulky and comes in colors that don't match my vehicles at all. Down side, they are pain to take apart in the cold, rain etc. I live in Norway, and we have similar weather as Canada. As I type, I got nearly 3ft og snow outside, so I can't play with my rigs at all. Also thinking of make my own variant of the deadman switch, cause I'm out of funds and have the parts in my spare bin. As others have pointed out, your hair is always stylish, and I can only dream of going out beanie-less in -20C, I would be sick for months if I try that! Keep up the good work sir :-)

[@blackvic5157]

Three feet of snow is a perfect scenario to take your rigs out. Are they rough terrain vehicles or are they not? or...are we just a little...chicken! Bgawk! Bgawk! Get out there! Post pix! Don't be a big wimp! (Just kidding, bro-hans - I don't go out in the snow either.)

[@MrCaprinut]

@@blackvic5157 Lol. Today the snow are soaking wet and it's raining. I do run some of my vehicles during the winter, but atm is a no go.

[@scalebuildersguild]

Thank you sir!

[@mikemorton7149]

Wow nice i need this

[@rcsmonkeygarage2242]

Sweet so easy to make your own thank you 😀

[@Fourwheeljive]

Interesting idea!

[@scal3guy]

Luv that ! No need for a high AMP in-line toggle switch . Matt ! the rear window louver blinds look awesome ;) kinda Candi colored "sweet" My bed "truck bed" is always clean ;)

[@pwrofgrayskull]

I haven't seen these before. Great idea, thanks for sharing! ✌️👍

[@michaellenheiser3157]

Very cool... Maybe a scale chain to attach lid to bed (out of sight) so you don't have to bother with misplacing it

[@scalebuildersguild]

The magnet is so strong there’s not much chance of that!

[@YYCRCFabricationz]

Definitely a gizmo that needs to show, I'm wanting one on every one of my models, thanks for profiling a very groovy product! I'm not one who enjoys all the sales pitch videos trying to get people to spend money on RC s@&t but this different, it's useful, needed & excellent idea.

[@scalebuildersguild]

Yeah, I'm not usually into videos that are a sales pitch either. I do like to promote well thought out, quality products though!

[@RevolutionX]

I think Josh mentioned one of these in an earlier scale update. Cool product.

[@scalebuildersguild]

It definitely is!

[@htimsrM]

Wow! What a hook line, great vid, thanks

[@scalebuildersguild]

Thanks very much for watching!

[@TonysRcTechboom]

Fantastic idea Mat , Fantastic Rig , thanks for sharing this with us all 👍😊👍

[@indybama80]

That would come in very handy. Thanks for the info n link on this. Im lookin to start building a couple trucks n these will definantly be a option

[@scalebuildersguild]

Glad I could help!

[@CarminesRCTipsandTricks]

This is a great idea! Functional with looks. IF I'm able to afford it, AND it's actually in stock at the same time, I'd like one or two. Carmine 🚂 🚙

[@scalebuildersguild]

Thanks!

[@RcNickster709]

I have seen you use this before and I thought that it was an amazing idea and wondered why someone haven't thought of this before... Very cool man. Thanks for sharing.. :P

[@Subboxstoker]

I put one on my axail 1969 chevy blazer it truely is worth every penny (battery option) i replaced the deans with xt90

[@scalebuildersguild]

Nice!

[@aussiegrimrc]

I freaking love my dms I have the gerry can and your bang on about the fine detail. Great vid cheers

[@scalebuildersguild]

Thanks very much!

[@rctrooper7261]

Wicked awesome idea. Thanks for sharing. Definitely want to get one. 👍👊🤙😎

[@rcintro1489]

That is cool thanks!

[@scalebuildersguild]

Thanks for watching!

[@kingstonrc329]

Yeah... Definitely gonna check in to these! Very cool idea 👌🏻👍🏻

[@scalebuildersguild]

Thanks for watching!

[@joshgraziosi8159]

that is pretty cool kids !

[@scalebuildersguild]

Sure is!

[@Dudeiculas]

Good idea that

[@scalebuildersguild]

Indeed!

[@Smile-N-Bear]

Cant thank you for all the sometimes hilarious info! Knowledge is definitely power in this hobbie as well as expensive!

[@scalebuildersguild]

Thanks very much!

[@thibet_edits5127]

Where did you get that model full suspension bike from

[@scalebuildersguild]

Knight Customs makes them: www.shapeways.com/shops/knightcustoms?section=Bikes&s=0

[@TheLoop11]

Where you got the mountain bike ? I need one !!

[@scalebuildersguild]

Knight Customs sells them on Shapeways: www.shapeways.com/shops/knightcustoms?section=Bikes&s=0

[@helgeegdorf4056]

That's great

[@RC1oNeTV]

What a great car~!!It's really nice~~!!👍😁👍

[@scalebuildersguild]

Thanks!

[@RC1oNeTV]

@@scalebuildersguild 😁😁😁

[@JMRCDesigns]

I'll definitely look into this. Would come in handy in my 1.9 Wraith. Here's the most important question though, is that a Burt Reynolds action figure in the Marlin? If so, that wins every award for the remainder of the year, and I want to know where to get one. :D

[@scalebuildersguild]

Just a guy that happens to look a little like Burt. But no, not him.

[@bmc_rc6212]

Such cool stuff!! Totally want it!! nice job!! love your videos!!

[@scalebuildersguild]

Thanks very much!

[@AgentChachi]

Woah, woah, woah. Where can I get that scale full suspension mountain bike?! I ride myself, and want to build a scale shuttle rig!

[@scalebuildersguild]

Knight Customs sells those sir!

[@Dshacklette87]

Where did you get the adapter at

[@operation11charlieinc]

Good stuff bro

[@scalebuildersguild]

Cheers!

[@robbrcnstuff4220]

That's a cool idea

[@peterrcbasher]

Cool video mat!!

[@scalebuildersguild]

Thanks!

[@Onetruescotty]

Sold out. Pray for me

[@loranpg9876]

Really nice idea; say where did you get the miniature mtn bike that is in the pickup box.

[@scalebuildersguild]

Knight Customs offers the bikes, here: www.shapeways.com/shops/knightcustoms?section=Bikes&s=0

[@gmummy]

Really a idea; where did you get the miniature mtn bike. Have a day!

[@scalebuildersguild]

Bikes are here: www.shapeways.com/shops/knightcustoms?section=Bikes&s=0

[@gmummy]

Right on!

[@shanesrt1]

i stole that idea and used the xt60 connectors on all of my setup (batt, esc, plug, 4 total) all hidden under body, works great..... like the idea you have shown tho.....looks cleaner

[@scalebuildersguild]

Very cool! There's always room for innovation!

[@darrenjackson6207]

Dude your hair is still cool...Rock on man....

[@scalebuildersguild]

I'm glad someone appreciates the time and effort that goes into it. ;)

[@mondospeedy3089]

I would love to see one made in to a case of beer.. Ice chest..? yes?

[@scalebuildersguild]

I'll let him know!

[@tmdario]

I just ordered that at amainhobbies for my truggy project, unfortunately, mine doesn't have the xt60 connector =(

[@scalebuildersguild]

The XT60 version is his new design, should be available now, or very soon to now.

[@RCJunky]

It's ok until you loose the top in the grass. whey not just install a switch and a extension rod.

[@scalebuildersguild]

I’ll say that losing this very strong magnet would be pretty hard to do.

[@RCJunky]

@@scalebuildersguild Regardless of how strong the magent is. if it is not connected to isolate the power it makes no odds. :@)

[@scalebuildersguild]

Then I guess I'll keep it in my pocket! ;)

[@00godlovesus]

Innovation:)

[@scalebuildersguild]

Sure is!

[@Confused_Hippie]

its a little off topic but how do you attach the pelican cases and other things in the bed? are they just placed in and gravity held or hold glue, glue glue...

[@scalebuildersguild]

I use e6000 or Shoe Goo! Thanks for watching!

[@Confused_Hippie]

to easy thank you!@@scalebuildersguild

[@trialpsycho_rc]

I know i need to have that 👍☺️

[@scalebuildersguild]

Yes you do Lukas!

[@WoodedCivilian]

That's an awesome switch but why does he cut off the ground instead of the hot I didnt know if it would make a difference or not leaving the hot side hooked up

[@blackvic5157]

Once you cut the ground, in a DC circuit, the hot side ain't hot no mo'. It's got potential but no current. Drop a wrench across that and any grounded point, though, and you will get current out the wazoo, all of it, because that will dead short your battery and turn it into a model boat anchor. Myself, I'd cut the red wire, just for that reason.

[@WoodedCivilian]

I was thinking it was something like that because I know when you work on a regular car they always say to disconnect the hot wire from battery

[@scalebuildersguild]

Never thought of that, but I trust Jonathan to know what he's doing.

[@jamesdash7349]

Where did you get the deadlocks on your truck ?

[@aidenkarajic7851]

Where do you get your little mountain bikes from?

[@scalebuildersguild]

Knight Customs.

[@user-ls8nq1yi1i]

Any way to get this in UK? Looks great

[@scalebuildersguild]

I bet you they ship from the US. Thanks for watching!

[@likelike6969]

Where do I find that bike that you got in the back of that rig

[@scalebuildersguild]

Knight Customs: www.shapeways.com/shops/knightcustoms?section=Bikes&s=0

[@rcragemoddingenjoyingrcveh417]

Can you use it on a 6S system

[@scalebuildersguild]

I wouldn’t. Even 4S might be pushing it.

[@pietervanderhorst2529]

This won't work with the trx 4 with stock ESC will it?

[@RccarsUK]

No...traxxas ESC has in built switch

[@scalebuildersguild]

Possibly, if you wire the switch wires together.

[@pietervanderhorst2529]

Alright because you've gotta push the button on the ESC to turn it on

[@stratobungle]

@@pietervanderhorst2529HobbyWng 1080 ESC, much better than the Traxxas stock ESC- programmable, too - and has an external switch. Very reasonably priced!

[@NCMOUNTAINSbackyardRC]

NC MOUNTAINS ❤... sweet.. 👍👍!

[@scalebuildersguild]

Ha!

[@Anthony_underscore]

There's a on/off switch on the underside of the rtr tf2 I picked up about a year ago. What's the difference between killing the power there or through a killswitch?

[@scalebuildersguild]

Most modern ESC’s the first thing that goes is that switch. I always direct power to avoid that!

[@Anthony_underscore]

@@scalebuildersguild Oh gotcha. Hey thanks for the prompt response. Love the channel!

[@TheChevy102]

love this unit, too bad everyone is sold out.

[@scalebuildersguild]

Jonathan's making more as I type.

[@TheChevy102]

Good to hear man , I will be buying one for sure . Love your vids buddy just got done a k10 short box build , my very first of many to come. You guys need to set up an event in Nova Scotia , there is nothing here.

[@NuvoVision]

Whats up Matt! Loving the channel...thanks for all of the content.🙏 Question for ya.... what is the most stable, hardest to flip 4x4 1/10ish scale truck. Dont care about scale as much...just want a planted truck. Any models come to mind? Thanks!!

[@scalebuildersguild]

Vs4-10 Pro would be my choice. You can get better CG from a Comp-specific setup, but nothing much than that out of the box.

[@NuvoVision]

@@scalebuildersguild thank you so much! I appreciate your response 🙏 will look into those now. Really awesome channel. Building a short course truck and have been really geeking out on old episodes as i go. New to trail trucks and been learing a ton. Thanks again

[@jjkeaton7085]

Do we get a discount???

[@scalebuildersguild]

No?

[@carternevill]

What's the bike Thanks

[@scalebuildersguild]

Knight Customs makes them on their Shapeways store.

[@Crawl_az_rc]

Curries? Where is that video?

[@scalebuildersguild]

Hmmm, I might have to do another video! ;)

[@Crawl_az_rc]

Please do!

[@RCKING1]

Hey where did you get that scale bike?

[@caracalspirit]

I saw it on Temu

[@iComplainer]

What’s an ESC?

[@scalebuildersguild]

Electronic stability control, also referred to as electronic stability program or dynamic stability control, is a computerized technology that improves a vehicle's stability by detecting and reducing loss of traction.

[@iComplainer]

@@scalebuildersguild thank you

[@kevinhubert7456]

Where can I get these please?

[@scalebuildersguild]

Link in the description.

[@kevinhubert7456]

Thank you alot😍💪🏻👌🏻

[@WoodedCivilian]

You should ask your friend that makes those to send you one more to do a giveaway on it to help promote his product

[@superleggera1992]

They r sold out :(

[@scalebuildersguild]

He's making more as I type.

[@superleggera1992]

@@scalebuildersguild awesome!!! Love ur vids

[@ppcsurfr]

Class 2 and 3? You said...

[@scalebuildersguild]

Or C1, but maxing out a C1 truck is easy!

[@electriceye683]

Why is there annoying noise/music playing when your trying to talk?

[@scalebuildersguild]

Because I like music, and I'll use whatever makes me happy. We can't all like the same music, but we can appreciate different things. Thanks for watching!

[@michaelcurtis2698]

As good as this is I’ll still need to turn on my esc anyways this doesn’t help with the button on the esc loltraxxas made an 8 dollar piece that mounts and does what this thing is intended to do which is turn your car on and off not hating on the video I just don’t see the point on spending 30 dollars unless your esc is powered as soon as it’s plugged in.... any one with more knowledge please fill me in on the details

[@Hamistar]

Kpop I found your brother

[@blackvic5157]

I do agree it's a good idea to disguise a quick disconnect as a scale propane tank. But, I got a question. First, allow me to qualify. I'm not an RC guy, I'm a 1/24 slot car guy. That means, about RC model engineering, I know: precisely dick. So, don't beat me up. Here's my question. Is there some reason you haven't been using a concealed switch somewhere on the chassis?

[@scalebuildersguild]

Because this is a cooler option that adds functionality to a usually benign object.

[@TheLilhulk1111]

No promo code it is 40.00 bucks no nothing I know when we use your link you get some sort of kick back right so hello

[@scalebuildersguild]

No kick back, just a product and a guy I believe in.