You think Is a Great startimg point for s beginner or maybe the normale sport Is a Better startimg points i was thinking about getting the hightrail and the 1.9 wheels and the standard shoks so i have both the setups
@gordkoffСағат бұрын
Cool builds, have you tried or heard of the piece of paper trick for setting gear mesh? Its what I use, just a small piece of paper in between the gears and tighten and remove paper.
@scalebuildersguild40 минут бұрын
It wasn’t the mesh. It was a much larger and difficult issue, but it’s sorted now. I’ll explain next week.
@ScalepinnacleСағат бұрын
Nice looking trucks, good luck on the competition 🙋🏻♂️
@saturnfivehynrgrc581Сағат бұрын
Billy Joel "Pressure"
@Captncouth2 сағат бұрын
Pretty much everything I build is from scratch. I kinda feel not building from scratch is a waste of money since you end up changing pretty much everything other than the frame anyway. I’m on like 7 or 8 now, with shocks, axles, rims and tires for at least another 2 upcoming builds.
@jkwinger2 сағат бұрын
I'm anxiously waiting to see how the leaf sprung rig does! I think you did a great job with the build! It looks awesome! Everyone is building the moon buggy. Yours, I'm sure will be a stand out! It's different. I like different.
@fallencrawlerrc45872 сағат бұрын
Ftoy looks great! Would love to see some brazing videos as I hope to start soon on my learning path
@brsrc7592 сағат бұрын
Comp rules: no brass servos or knuckles Matt: paints brass servo and knuckles 😂😂 cheater
@44punisherable3 сағат бұрын
Literally the HOA of RC crawler competition and that's why I don't do it. It's not fun, it's a bunch of BS rules for tiny off-road. Washington is one of the worst of course. I'd just keep it simple regardless
@HBFTimmahh3 сағат бұрын
Matt, you may want to double check your link lengths. When you first drove it on the squares, it looked like it was dog tracking, aka the rear end is not behind the front end on center. Like the rear was going a slightly different direction. This may have been because the rear steering was not tweaked to be on the same center path.
@scalebuildersguild3 сағат бұрын
It’s rear steer, thanks!
@BROCSRC3 сағат бұрын
They are coming out great!!!
@-Gerald-4 сағат бұрын
Rebecca, if you're reading all of these comments about Matt's F-Toy... It's not what you think.
@nuge744 сағат бұрын
Great progress, things are looking great! I agree, nothing beats building something from the ground up that is literally unique to the world.
@cdube19714 сағат бұрын
Praise the wheel
@philadelphiacollins24604 сағат бұрын
I need this badly. Any way to get one of those Volvo bodies with the decals?
@KevinRCMan5 сағат бұрын
Tbh it doesnt sound like its rubbing it sounds like something is bound up
@zeeptollbooth41295 сағат бұрын
Don't be that guy who brings the super Hot girl and then can't get it up.
@bucksrcworld81195 сағат бұрын
that f toy is awesome!
@trashpandacustoms4005 сағат бұрын
I built an almost all metal TRX4. It's only 10% Traxxas. I built it as a trail truck, but it climbs way better that I expected. I also used scale hardware everywhere. It's a great rig.
@Jephph13bREW6 сағат бұрын
Cool video up until you showed the Waffle house logo again. Everything got blurry and hazy afterwards since I was compelled to down a 12 pack of PBR and now I have a black eye and have several trespassing charges.
@neildaniels54436 сағат бұрын
Dat FTOY is fantastic 👏 👌 Love it.
@brandongeiger16847 сағат бұрын
Looking good all you need now is some just for men and a wobble pop so you can relax
@user-ho5vm9rv1e7 сағат бұрын
Do u have a spacer between outrunner and skid? Might be ur noise
@forrestcrabbe7 сағат бұрын
Both the trucks look great, good luck in colorado 🤘🍻🤘
@MidCoast7 сағат бұрын
I’m not going to mention it’s of center. But man that copper looks good!
@CRAZYBUILD3497 сағат бұрын
built over 30 trucks, and loved every one, yours is looking great, you got this!!!!!!
@1957fuzz8 сағат бұрын
Both buggies look killer matt, well done👍
@Mike_and_Life8 сағат бұрын
No Duffman driving the Duff beer-mobile?
@Errrror_4048 сағат бұрын
The moon buggy build is the first ground up build I’ve done, plenty of kits. It’s definitely been my favorite project, the whole experience has been great.
@blakedenley37928 сағат бұрын
I use the gt5 with thumb steer for front and the top channel 6 knob for rear steer so I can put it where I want it
@FYRC158 сағат бұрын
You can program the MT12 for 4WS, rws, & crab just with pushing one switch like regular surface transmitters. It might take you another week like it did myself but when your done your done. Any other vehicles that need 4ws you can just copy that and you always have four wheel steer it’s much easier… my opinion still great content on a time crunch.
@scalebuildersguild8 сағат бұрын
Yep, I opted to NOT set that up, as I don't want the additional complications, and possible mistaken button pressing!
@coloradopaintlife4439 сағат бұрын
Where in Colorado?
@scalebuildersguild8 сағат бұрын
Morrison, CO
@gatorrcgames9 сағат бұрын
Good video man! I have a 24ish scLe and 10th scale build planned. However, I bought a new house, so most of my free time and money is going into it. Hopefully will start building around September. 😊
@liamRC54879 сағат бұрын
That noise. Is your pinion too far out from your motor? So the spur is rubbing on the shank of the pinion?
@scalebuildersguild8 сағат бұрын
Negative, but thanks for the suggestion. I think it might be the actual out runner rubbing against the faux motor case.
@liamRC54877 сағат бұрын
Keep up the good work. I'm looking forward to scratch build my own one day. I'm currently building a bomber from parts from china
@Crawl_az_rc9 сағат бұрын
The transmission is no longer isolated from the chassis. That is why you get the added noise.
@scalebuildersguild8 сағат бұрын
Others who have built it aren't having the same noise, but I have an idea of what it might be!
@gibsonlife5739 сағат бұрын
What do they say a sheet of paper and as long as it don't rip
@gibsonlife5739 сағат бұрын
What a blessing to be able to build a rig like that and go to a competition that is awesome
@MegaTraxxas9 сағат бұрын
I totally agree that building your own truck is much more fun. I've got TRX4, which is very capable, yet my handmade truck still gives me more satisfaction 😅
@LetsGoRCn9 сағат бұрын
I thoroughly enjoy your channel. Your attention to detail is outstanding and I’ve learned a few tricks of the trade from you as well. Appreciate it sLim 🫡
@gibsonlife5739 сағат бұрын
Dude you did such a good job I love the color I love everything you done with it if you ever want to sell it let me know I mean of course unless you want like four or five thousand dollars
@gibsonlife5739 сағат бұрын
Just a question why wouldn't you put the brass one on the front
@gibsonlife5739 сағат бұрын
If you ever sell that buggy let me know
@SaltPondRC9 сағат бұрын
Nice video Matt. Hello Rebecca.
@thomasblair79969 сағат бұрын
Nice rigs,it feels so much better when you build them,love kits,thanks for sharing your trcks with us,good luck in the competition!!!
@GSG-lc5zm9 сағат бұрын
ALL HAIL THE WHEEL!!! 🤣 you need to bring the wheel back.. that was so much fun..(well, for us anyway) 😂
@brsrc7592 сағат бұрын
"the wheel"? What are you referring to?
@njohnsonII9 сағат бұрын
That FToy is awesome!
@RCCrawlerz2099 сағат бұрын
Bro....disappointed you didn't go with the leather look. 😐🫤 Looks great, regardless. 👍🏼
@scalebuildersguild9 сағат бұрын
You're confusing me with Josh, I was never doing that.
@RCCrawlerz2099 сағат бұрын
@scalebuildersguild maybe. Lol I was for sure you were doing it. Lol maybe not....my bad. 🤦🏼♂️
@GSG-lc5zm10 сағат бұрын
Soooo... What if you paint the servo in a brass colored paint!? Lmao 🤣 I'd paint my WHOLE truck in brass ... Call her the MISS BRASSY... Wait.. electro plate it! 😂
@jrfishes10 сағат бұрын
It’s no shock at all that you are waiting on JEC parts. He’s never on time and there are always excuses.
@tjpighin10 сағат бұрын
I designed and built a ti caged buggy with what originally was a capra. This was all primitive with graphing paper and hand tools and hand files and such with about 60 or more hours of my time designing bending and notching. It was not cheap to get my local welder to weld it but it turned out pretty great and the performance faaaarrrrrr surpasses my expectations being a very planted and capable 4ws buggy. It is a line slayer and very realistic. I just need an interior now and it will be legit