YOUR ZONDA CAN'T DO THIS!!!

One piece USA made 3/16 shafts kintecracing.com
SMC Lipos are AWESOME! smc-racing.net/
tp-4050 3y 2220kv motors. tppowerusa.com
Zonda boat kintecracing.com
Seaking esc 180amp offshoreelectric.com
Props from kintecracing x945/2 CNC
150mm Rudder kintecracing
Carbon servo mount kintecracing
Custom carbon work done by Jack Payne (twissted)
(((((How to buy one))))) www.rcgenesis.n...

[@richardsalinetrojr1957]

Awesome boat but I think I enjoyed the background more.lol.that view would never get old.amazing scenery.

[@450hp202turbo]

you want some charge left 17% or you run the risk of puffing them as they get low and you punch the juice on Amp spike can pull them under volt , good way to stuff new lipos in a boat is running them till lipo cut off , not recommended for prolonged battery life ,

[@OCD_Engines]

^ Good info ladies n gents!

[@twissted1277]

Oh! It's on now I replaced the 1945/2 prop and bought a GPS unit and also got some 1448/2 cnc props to try!

[@Woody-nc1ru]

Chuckle investing in a little hoopty inflatable raft would be a handy item to have for this hobby. Especially if the water is cold😬

[@arnoldchildress8053]

Man that's things a beast

[@kevinkeller4723]

Loved it and subbed ya!

[@twissted1277]

Thx

[@efthimisspyropoulos]

Nice paint and good choice motors frome tp power on 6s.

[@RCDUDE81]

I know this is an older vid but man, that baby is screaming! I've been eyeballing a Zonda for while. I have the Pursuit and love it. Upgraded it's an outstanding v-hull!! So how were the temps after a full run like that? 2220 kv seems kinda high to keep cool temps. Geat vid man! Subbed ya!👊👊

[@badman187ification]

AWESOME playground dude!!!!!

[@teknofil007]

Cool video and Nice speed. I was owner of 3 Brushless boat. Spartan, Genesis, Minicat. If I bay a boat agein I want somthing faster.

[@twissted1277]

I get service and the prices are good. I don't care if it's a secound job or if it is how they support their hobby. I have no probems. They replaced parts that are wrong ( sent same prop instaed of R&L). Shipping is fast and cheap.

[@ChaosFragrances]

Did you fit the motors in the stock motor mounts?

[@twissted1277]

Chaos Descent i did

[@twissted1277]

I got a replacement 4519/2 for the that snapped in this video!

[@limelightny203]

Wonderful spot to open up were is this?

[@Boosterr2]

If you need to turn over? swim?

[@flashtech6492]

how much money you got into that boat..I 'm guessing a lot...

[@okiedoak201]

Nice vid..... But how about some video of the International Scout you drive....and the scenery is awesome

[@mikemagnum7987]

I'm really sorry to see such a fine looking and fine running high performance boat go sideways due to a broken prop! The props appear to be aluminum? if thats the case, it probably couldn't withstand the huge amount of centrifugal force and vibration and came apart due to that? Beats me, just a theory..... Sweet paint job and a smooth runner for sure. I would have went swimming to! ;) That country looks like north central Wa...... around Chelan..... Hope you got that rig back in working order ok.... Thanks for posting this video, the Zonda is a better rig when it's "Americanized"...... ;)!

[@jackpayne8805]

Thanks. Yes its back and going again.

[@jjrotogeek]

Bad assssss brother 🤘

[@twissted1277]

They are counter rotating meaning one turns left and the other right. Watch the video it shows the broken prop at the end and also the way they turn. kintecracing.com/Zonda_Cat.html This is your one stop shop for all things Zonda Cat.

[@marcunger805]

kintec sucks ..rc boat bitz is where real knowledge and good parts r for zondas. kintec gets from boat bitz and marks up price. kintec is literally a 2 car garage in pa. been there. its a joke

[@twissted1277]

That may be true but if you look I did a lot of custom work to get this boat to be what it is in this video. So joke or not this isn't really a Zonda anymore.

[@twissted1277]

yup

[@rcrunner4]

how fast do you think you want with the 4050 2220 motors

[@twissted1277]

I don't know. I just bought a GPS unit so I will know in the spring.

[@bobaque70]

nice international scout your driving...?havent seen 1 in a while....

[@alessandrocremona110]

Why?

[@MrQuasar1958]

It’ll never blow over at 10 mph!!!!!

[@twissted1277]

[@marcunger805]

cant do what? flip over at 60mph from improper setup? you r absolutely right. mine will never even at 90 plus

[@twissted1277]

How many boats do you have? Here is the big question? Never is a long time, how can you be that good? The best of the best flip high speed boats and that is why it is important to build them well. Good luck with never and please post a video of your 90 MPH boat. I looked you up and you have none. Help use all out so that we my learn from your wealth of experience!

[@ecoovert]

+Marc Unger So those German guys with their $5,000 twin prop boats that experience blowovers all have their boats set up wrong. Let me tell you something. Anyone who takes their boats out to the lake on a regular basis, assuming it's a real fast boat, will experience blow overs from time to time.

[@marcunger805]

youre right from either current, chop, wind, any kind of turbulence. mine anyday of the wk set up properly will never flip as long as I run it under good conditions and good control. u can flip a Walmart toy. price means jack shit. I can see hes got ideal conditions for a real run. good water surface not glass.slight ripple. no wind and looks like a lake so current wouldn't b an issue.

[@motortoys9942]

If you ain't blowing over your shit is to slow!