Brakes Pull to one side Mystery Solved K2500 6.5 Turbo Diesel

[@libertyauto]

Wow, I never would have thought of the Banjo Bolt being the culprit. Good job troubleshooting that Joe. Also, nice "Hints from Heloise" on the chip clips. grin Thanks for the followup.

[@AveRage_Joe]

Yeah it was a tricky one to figure out Fo Sho! Sure I could see a bad caliper out of the box but not a banjo bolt! Lol yeah those are the BEST chip clippies EVER!!!!! The store bought ones are junk!

[@newburypi]

So this is my take-away... She knows how to properly fold the bag before clipping 👍

[@AveRage_Joe]

🤣Only one way to do it!💥🤘

[@HBPowerwall]

So manly... Mrs Average - he's a keeper!

[@AveRage_Joe]

Thats what I hear!😜🔩🔧🔨🎥💥

[@ronroberts110]

Awesome! Never throw away any part until a week after you think you have solved the problem...

[@AveRage_Joe]

Or even after😉😉🤣🤘

[@CanispaterChristmas]

Happy for you that you figured i out. Music was a nice touch!

[@AveRage_Joe]

Thanks man! Lol Banjo music🤷‍♂️🤣

[@Jimmeh_B]

Dude!!! What a pain in the d!C! Nice catch though! 12yrs I've been a brake specialist, never come across that one and don't know if I would have checked the hole position on new banjo's either. Guess you just got lucky! Nice of the supply house to offer you some compensation too.

[@AveRage_Joe]

Was a total pain in the Dink! Almost took back the calipers as bad and Im betting if I did Im pretty sure wouldnt have even used the new hardware and would of had ended up with the same issue!😲 Then I would of started replacing hard lines thinking one was clogged which would have still not fixed the problem! CRAZY!

[@timm3802]

Cheap china quality check! .. Hate when this happens!

[@AveRage_Joe]

YES!!!!!!!

[@jeffflanagan2814]

I've ran into this banjo bolt issue twice now with reman calipers!

[@AveRage_Joe]

SERIOUS!!!

[@joeyspiller8812]

I have similar issue but my right front is locking up after new hoses and calipers ? I am gonna check the banjo bolt next weekend !

[@stephennelson153]

I will DEFINITELY have to check this out, as I have replaced all the same things, and am getting a pull that i don't recall having before. And I did a TON of bleeding as well.

[@Thebigmanmetaldetecting]

Hahaha I thought I was the only one who used coat hanger clips for sealing things lol

[@samisolissolis6556]

is a Abs control module problem

[@stevesmith1135]

I am having the same issue with my van

[@korishan]

While talking about Banjo bolts, in the background was Banjo music 🎶😉😎

[@AveRage_Joe]

You know it!!!😆🤘

[@kirkb4989]

Banjo music for a banjo bolt topic - NICE!!! And a bonus chip clip tip! What a guy...

[@AveRage_Joe]

Only way to do it is to add the music!😆 The store chip clippys are junk, these are damn near industrial💥🤣

[@lnxpro]

BOOM! (First) Where the powerwall related videos ? lol. But if I have problems with my car I'll bring it to you :D

[@AveRage_Joe]

BOOOOOOM💥💥💥💥 Powerwall vids will be back here in a vid or so. The suburban has a lot of miles on it so many original parts are on there way out. So in turn have been doing a lot of work replacing/fixing!🤘

[@bobj8896]

Awesome! Glad you figured that out. Calipers are so simple but can be such a pain tracing a weird issue like that. You remembered the key though, back track my steps after I've replaced obvious potential points of failure. BTW a hose and air bubbles were both very likely candidates and you explained why as always.

[@AveRage_Joe]

Thanks Man! Was tricky to track down for sure! YES!!! Brake pull after parts change=change hoses cause there old and can cause brake pull=check parts replaced cause still have brake pull💥🤘 Yeah most videos I do I always try to at least explain some cause and effect(if I remember to) cause it may help another fix an issue and it also helps me re-think troubleshooting!

[@adamcecere3369]

Isn't it a great feeling when we can trouble shoot and actually fix a problem. Took you a week and a half to think of that bolt. That is why I hate it when someone says 'you are thinking too much about it'. The thinking 'too much' gets it done.

[@AveRage_Joe]

It is a great feeling especially when all other suggestions and thoughts fail! All I do is THINK lol😆🤘💥

[@robertn915]

Well who would have thought. Suppose it was the only thing left to replace. Yes I would have been just a little pissed with the supplier

[@AveRage_Joe]

Yeah was one of the last options lol. Almost took the calipers back to swap out. Cant say I would have even used the new hardware so I would have had the same issue and continued to search!

[@jasonflt]

winner, winner chicken dinner! just a stupid bolt ugh

[@AveRage_Joe]

Crazy isnt it! I seem to win all the time!😆💥

[@alsemi-back-up579]

Great tip on both problems. Thanks for the upload.

[@AveRage_Joe]

Thanks for watching!💥🤘

[@russellgilchrist3951]

What Joe you actually leave crisps , once we open a bag theirs none left and the bag goes in the bin, booooom

[@AveRage_Joe]

😆Its just the 2 of us and well.......3 cats! BOOOOOOM Chip Clips😆💥

[@phizicks]

You repair air planes and should know that replacing parts for original manufactured design is a must otherwise planes fall out of the sky. lol. I guess you couldn't see the hole difference and was the supply fault anyway

[@AveRage_Joe]

Sooooo Truuuuue lol! It must of been the first caliper they boxed Monday Morning 🤣🤷‍♂️

[@phizicks]

@@AveRage_Joe they probably said "hey Bob, we're out of stock"..."oh just give him one of the ones from so and so car, they have the same length and thread anyway". lol

[@korishan]

All this time and it was just your nuts were the wrong size. I mean bolts! 😜

[@AveRage_Joe]

LOL Wrong right nut I mean bolt but that one doesnt get used anyway😉😆😜

[@korishan]

@@AveRage_Joe 🤣😜

[@richardriehle4159]

lol.i've done"chip clips"!

[@AveRage_Joe]

🤣🤘💥

[@samwise9407]

Good to hear you’ve sorted it bro!

[@AveRage_Joe]

Thanks Man! Was a tricky one for sure lol!

[@pulesjet]

BingO ! Good Stuff.

[@AveRage_Joe]

BOOOOOM!💥🤣

[@readmore7180]

Nice one, got there in the end

[@AveRage_Joe]

Yes Sirrr, tricky but gotter done!😅🤘

[@torstenb5248]

Booooooom!

[@AveRage_Joe]

💥💥💥💥💥💥🤣

[@korishan]

@@AveRage_Joe Actually, Anti -Boom, he won't get into accident now 😉