Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B
@sandy7299 Жыл бұрын
One of the reasons I and many others follow your channel is because we know enough about small engines to know that you know how to fix them! As an aside I have a Husqvarna 240 strimmer (brush cutter) hanging around in my garage with a blade on it I decided yesterday that after 4 years hanging there I might see if it would go NO new fuel just some discoloured something in the bottom of the tank 5 pulls and she's running! Added new fuel and she ran all day, the wee sweetie! 😊
@MakeitZUPER Жыл бұрын
YT has always been known for having a lot of fakes. That's why you're so popular. You're legit.
@ryelor123 Жыл бұрын
Its the culture of people in those countries. They don't want to give away the secrets of their trade but, at the same time, they want to show off. That's why they seem to make critical mistakes or they avoid replacing things they should replace. Anyone can clean up an engine with 0 skill but not everyone knows how to replace rings, hone cylinders, compress rings, etc.
@MakeitZUPER Жыл бұрын
@@ryelor123 True. I've seen many "how to" videos from the US and UK that skip a lot of important steps that cause the viewers to end up in over their heads. I have had to bail out many of these people because of this. There are good presenters but there are plenty of terrible ones. "Scotty Kilmer" is terrible. He makes me want to reach through the internet and slap the crap out of him, lol. He's so ridiculous, he's funny to me but there are so many people who think he knows what he's doing, lol.
@mikehuffaker3593 Жыл бұрын
@@MakeitZUPERI hate Scott Kilmer.
@scott9676 Жыл бұрын
Yeah, most of the primitive technology ones are faked. Yeah, we completely dug this huge hole in the ground with sticks. Never mind the tread marks from a track hoe.
@MiguelLopez-sj2ib Жыл бұрын
😂 her stuff is fake too
@Daniel-Weaver Жыл бұрын
She said ," Money shot!" Twice! She's a keeper.
@Daniel-Weaver Жыл бұрын
@@skidooer583 I caught that later.
@gergemall Жыл бұрын
You’re amazing always
@Artie997 Жыл бұрын
😂 this one made my day, thanks!
@vicinvesta8349 Жыл бұрын
Broaden your horizon, man.
@alann.797622 күн бұрын
Thank you for helping come me to my senses. Recently I began seeing many KZbin videos from various Vietnamese women who claim to come from the poor countryside and “repair” and “restore” old chainsaws (the Husqvarna 365 seems to be a favorite among them), along with many other small engine tools like grass trimmers, tillers and other farming machinery. At first I thought they were legitimate and even gave Super Thanks gifts to several. Then when I looked more closely, I began seeing some of the clues you point out that these are fakes. And I noticed stylistic consistencies between these videos that lead me to believe some organization may be behind this, helping to recruit and promote what passes for talent (including advising these women on how to dress to maximize male viewership), and they probably get a cut of the proceeds generated by the videos. In any case, I now want to give a Super Thanks gift where it’s well deserved, to a person who produces highly educational and informative videos that are all very genuine.
@malcolmboynton7652 Жыл бұрын
this one was kinda fun. as a retired german car mechanic i play with small engines for a small side hustle. i want to say you,steve and donny are great sources. other tubers might spend way too much time on what should be way too obvious. i mean fresh gas and clean carb is mechanic 101. give me a break. good work. keep em coming.
@lukasvisagie9513 Жыл бұрын
Love your "intuitive feel" for what's coming - obviously based on lots of experience. Go girl, keep at educating us.
@markmcmeen287 Жыл бұрын
Your restoration video was awesome! I never knew there were fake restorers out there. I guess the first clue was they just happened to have someone filming their "hunt" for something to restore. Keep up the good work!
@toddepperson7465 Жыл бұрын
I was hoping she'd play lumberjack by jackyl at the end
@delseckora5327 Жыл бұрын
You have integrity, that's why you are respected so much.
@brianspurrell3348 Жыл бұрын
Thanks for the video. Sad that you had to take the time to put it out. Anyone that has been following you should know the difference but like my grandfather used to say "you can't fix stupid". Kudos to you. You provide good down to earth instruction and guidance and on top of that you do it for free helping people like me that can't afford pricey shops that do not tell you any thing. Thank you again. A Canadian Fan.
@ronallen6578 Жыл бұрын
They don't try to fix it, just making an attempt to keep it on life support??
@rogerthat.9105 Жыл бұрын
You saved my *** can’t remember the title but it was the one that you showed how to clean the carbon out of the screen in my blower..THANKS a million……
@stuartcurrie5961 Жыл бұрын
This needed to be done for sure there are definitely some true mechanics out there and this is one.
@everythingandanything5155 Жыл бұрын
They do the same things with acoustic guitars, that they find setting in the weeds by a pond, covered in dried mud. And electronic stuff like stereos, vcr's, TV's and I even seen them do a speaker before. They just edit the video in reverse to make it look like they refurbished the item to make it look like 'new' when their done.
@radicalrick9587 Жыл бұрын
*If millions of people can watch a 3+ hour Titanic movie, we can definitely watch a measly little 1 1/2-hour video with your entertaining, educational, and valued content. Keep in mind that when the video is as good as yours, it will never feel like a 1 1/2-hour video; it will feel more like a 15-minute video, leaving us wanting more.*
@richardbarber4444 Жыл бұрын
There are those who love your long videos just to see you! Then there are those who appreciate your presentation and knowledge. Keep up the good work.
@WeaselAcres Жыл бұрын
These videos are insulting to everyone's intelligence and precisely why I follow Chickanic!! Thanks for the great content!
@ryelor123 Жыл бұрын
People in those countries don't want people to know how to fix things themselves since that would take away their business. They intentionally do things wrong so that DIYrs will fail at repairs and come to them. They know what they're doing and they fix the stuff correctly before sale but they don't want others to know how its done correctly. Its a common strategy for preventing competition. We in the west really don't understand how odd we are to the rest of the world for sharing accurate and honest information about our skills.
@ronaldhostetter5908 Жыл бұрын
Great video. Don't worry about the length of your . would rather listen to someone who knows what they are talking about for 2hrs then watching a fake video Keep up the go work.
@lynnlutjen261 Жыл бұрын
Girl you rock! Enjoy your videos and I did miss your voice in the last video. You make my day learning your techniques in small engine repairs and reviews. Wish I live in your neck of the woods for my small engine work 👍👍❤
@anterolindsted6 ай бұрын
Greetings from Finland! I fixed similar Poulan that i got for free. Just cleaned the gastank, carb and installed new fuel line. Only the tuning of the thing was little weard because the cover over carb didn't have any holes, but i got it working still.👌 Strong little saw.
@CutterCH Жыл бұрын
Glad I'm not the only one who has noticed this pattern with restoration videos. LOL
@CoolcatTerri Жыл бұрын
I don't care if the video is longer as long as it has the same entertainment & educational value as your regular videos. I would watch an 1+ long video no issues.
@desmit6 Жыл бұрын
That’s awesome calling these guys out. I was just taking to my father about the other frustrating thing on YT.. I look up a “how to do _____” vid and click on one with a decent number of views and it turns out to be a schmuck stumbling through his first attempt at said job. Waste of my time. Stay awesome.
@jonahssmallenginerepair Жыл бұрын
Bri, This is crazy how so many people do this stuff. Thank you for the video showing the scammers. Its about time the world knows about them. I think you've inspired me to make a video series, restoring a kioritz Echo. Keep up the great work.
@RickStorni Жыл бұрын
Thanks for showing this to us Bree
@rayanator105 Жыл бұрын
Hand Tool Rescue is one of the legitimate machinery restorers because he actually gets them running by the end of the video or multiple videos if it's a big project.
@amundjo Жыл бұрын
Hand Tool Rescue is absolutely worth watching
@chrisacres Жыл бұрын
He’s the GOAT of restoration vids.
@jessicabuckman9675 Жыл бұрын
I watch you're videos, because you show things being fixed in a step by step manner.
@williamabramovitz9455 Жыл бұрын
I hope you know your videos are in a different league, your enjoyable to watch very informative and calm, no bravado or macho moves, I watch your videos more than TV itself, so you just keep on keepin on.
@mytrainofthought Жыл бұрын
Enjoy the videos. Was delighted to see a VW in the background at the end of video! I guess I missed that in the restoration video. Had a 68 bug years ago and wish I would have kept it.
@theoldman8877 Жыл бұрын
40 years ago, while interviewing for a small engin shop mechanic, we set up a saw indical to your grandfather's saw with 5 defects and asked the candidates why doesn't this saw cut wood. I was astounded how many people missed the fact that the chain was backward . This was especially concerning when the job title said chainsaw experience required .
@tomrogers9467 Жыл бұрын
A customer brought a bare chain into my shop for sharpening, picked it up Friday. Monday he’s back, chainsaw in hand, reaming my axe out about my complete lack of skill in sharpening. I took the saw, asked him to follow me to the bench, while I turned the chain around on the bar. Sliced a couple of wafers from my test log and handed it back to him without a word. He slinked off like a beaten mutt, saying nothing. Never saw him again. Don’t need “customers” like that anyway.
@markboyce1001 Жыл бұрын
Only watch your channel, learn alot on small engines, thank you for being a good teacher,everything I have runs perfect,4 chain saws 2 weedeaters,2 push mowers 1 zero turn,and 1 lawn tractor,so I have a few,thank again,and those FAKE videos are very funny those people making you think that they actually restore those old beat-up chainsaws,thank you for pointing that out.
@bennieharrison9965 Жыл бұрын
I have been running my echo cs-590 for 8 years. I have learned a lot from you. I know it is a lot of work for you to edit these videos, but people like me appreciate you! Thanks! I would buy from you if I were closer to you. I am in Georgia.
@libsrdum Жыл бұрын
You have a great sense of humor. Thanks for the laughs.
@danielsirman8865 Жыл бұрын
i, for one, like your longer videos because you take the time to cover the finer details of what is needed to get things fixed. you have helped me get a few things done that i was not sure i should attempted. not to mention you look a lot better than any of the guys i have seen. your grandpas old chainsaw video was great. i think it is the first time i ever saw you do a restoration on anything up to and including paint. it looked great when you were done. keep making vids.
@barryballenger7246 Жыл бұрын
Bre, In the aviation world this kind of restoration is called a Krylon overhaul. You clean it up and spray paint it to look pretty. By the way, I stopped in to meet Chickanic at her shop and she was very friendly and kind. I even got some Chickanic stickers! She is the best.
@MrTheHillfolk Жыл бұрын
LOL do you know how many Piper Cubs I look in the nooks and crannies and see absolute trash and dust and dirt that's 70yo? Some folks have an odd way to use the phrase restoration
@dchawk81 Жыл бұрын
We call them Rattle Can Rebuilds.
@TerryStover-u7q Жыл бұрын
I watched a couple of these early on and picked up on the fake crap. I'm glad you made this video, it's tells it like it is. Thank you.
@johnskitzis6540 Жыл бұрын
I’ve never seen one of those videos. Now I’m super glad I didn’t! Thanks for keeping it real Bre! Have a great week!
@ClemBunce9 ай бұрын
glad you made this video. you are not KZbin click bait. those other ones are.
@Factopia776 Жыл бұрын
It's important to be cautious when watching such content online and not fall for deceptive practices. Kudos to the creator for shedding light on these scams and providing viewers with an authentic perspective.
@Ralphie8185 Жыл бұрын
Now I’m going to have to restore my poulan super 25 vintage 70’s edition, it’s been on a shelf for a while and after watching your channel this year I think I can get it back to life!
@TedBiggieIII Жыл бұрын
Love your content, got a Husky chainsaw running again thanks to your channel. Thank you!
@richardhillier442 Жыл бұрын
Thank you ma'am 😂 was worth the moment.😊
@bobwollard9105 Жыл бұрын
That's too funny. Honestly, I have never seen any of those bogus videos because I know the real deal when I see Bre repairing the equipment. Thank you, Bre. ❤
@davidjackman5773 Жыл бұрын
Well DUH! Obviously the chain on backwards is for running in reverse, thereby saving the environment. GREAT video, Bri. Keep up the educational process.
@chriscornett3144 Жыл бұрын
I will have to say I just skimmed though the restoration video.. due to the fact your other trouble shooting videos are more educational.. way to go teach!!! Keep up the good work
@321CatboxWA Жыл бұрын
Well done . Thank you. Plenty of bogus aftermarket add on installation videos as well . Some videos give false info intended to cause damage if duplicated .
@richardjones4080 Жыл бұрын
New sub really impressed with your channel you keep it real not only do you show repairs but show mistakes made and how not to make them
@garydillon3960 Жыл бұрын
I Loved This. Funny and a blast to watch. Thank You.
@tedneitzel Жыл бұрын
I've seen those fake videos and it's mostly people from other countries watching them! But I have to say a few times in the past as in 25 years ago I welded up holes in top of pistons on old snowmobiles and run them for years with no issues! So now your restoration vid on a 75 dollar saw makes sense lol. Good stuff as always!
@ryelor123 Жыл бұрын
3rd worlders don't like it when people fix things for free. They want business from their community and thus lie to people in their communities about how things are fixed so that people will have to rely on them. Its depressing since that's one of the things that contributes to those countries being so poor. However, they still want customers so at least we don't have to worry about surgeons making videos where they incorrectly do surgery.
@tjclarke4604 Жыл бұрын
This is great, calling out the BS, I love it! I'm a pro OPE tech myself, these vids from these hacks confuse me, because I don't know whether to laugh, or swear aloud at the screen, lol!
@smitty4912 Жыл бұрын
Another great video Bre. I consider a lot of those rusty restorations as 'Bait and Switch' Videos. They show how they take apart a rusty item then in the end show you a replica item that is painted the same color and make you believe that is the same saw!!Those of us mechanically inclined know that a scored piston and cylinder put back together is NOT going to run!! Keep up the great work!! P.S. Still looking for a carb for a Husky BT125 Backpack blower
@ccastaneda669 Жыл бұрын
Thank you for the heads up. Always enjoy your videos and the hard work that you put into them and the information that you provide the general public. Thank you for all you do.
@dorhocyn3 Жыл бұрын
I had a Poulan chainsaw and I’m surprised it didn’t end up stuck in a tree as many times as I got angry and threw it across the yard.
@thomassorrow2582 Жыл бұрын
That is why I watch you, Taryl and Mustie 1. sometimes Mustie1 gets into things I am not interested in. I also watch several videos if I can find them on same subject. Just in case someone is BSing.
@luismarquez315 Жыл бұрын
Love watching your videos keep up the great work!!!
@Chickanic Жыл бұрын
Thanks!
@wtmayhew Жыл бұрын
Thanks! Learned a lot got great tips here to keep my small engines going. Also learned which way the chain goes.
@ettcha Жыл бұрын
Wow! Same as the fake animal rescue videos, just without the abuse 🐈
@wayneswonderarium Жыл бұрын
Well, abusing live creatures (ignoring the viewers) anyway. They probably destroy perfectly fine chainsaws 😡
@ryelor123 Жыл бұрын
@@wayneswonderarium Doubt it. Things like that that are sold on the international market are way more expensive in 3rd world countries due to PPP. 1 USD may buy a lot of food there but it has the same - or less - purchasing power for things that are sold on the international market. Those name-brand saws were well used and they probably did fix them properly afterwards. In those countries, professionals don't want to share the secrets of their trade. One way is to be secretive about things and another way is to lie to the audience so that if other people in their community try to fix things themselves, they'll never get it right. Its a common tactic in 3rd world countries and one of the reasons why they're so poor.
@erik_dk842 Жыл бұрын
@@ryelor123 It's not much different in Europe, either. I exclusively buy cars from the Volkswagen group, because the shared hive knowledge on the internet about the cars is much better than other brands. I tried to help my neighbour with his BMW, and it was soon clear that knowledge about them is worth real money and kept in closed circles. All forum threads about his problem ended in one of three disappointing ways: crickets, the shop fixed it, I sold the car with the problem unsolved
@karynkerndl2716 Жыл бұрын
There are soooo many of those. It's sickening to them undermine the real ones.
@laarshegdish6016 Жыл бұрын
That's pretty good! Don't they know most people can see through the fakeness? This is got me laughing out loud! I appreciate your actual restoration of your saw!
@RZK1966 Жыл бұрын
Who are all these people using chainsaws while wearing flip flops
@grumpyoldvet2304 Жыл бұрын
Ok for real. True story. I went down to the titanic site with a mini sub I made from a 55 gal barrel, a sheet of plexiglass and 3/4” pvc pipe, oh and some JB weld. Anywho, I found a Husqvarna chainsaw (early model) that was completely covered in ocean stuff. I flush it out, added some gas and it cranked before I could completely pull the cord. True story 😉
@marbleman52 Жыл бұрын
@grumpyoldvet2304....Wow...that is amazing that you found a Husqvarna chainsaw down there. But...I hope you brought it up to the surface very slowly so it wouldn't get the "bends"...lol..!!
@rexhorning7228 Жыл бұрын
Don’t forget to paint it red and put the chain on backwards
@Bellboy40 Жыл бұрын
Thanks for the info. I wasn't aware that they were using chainsaws in 1912. Cool.
@grumpyoldvet2304 Жыл бұрын
@@Bellboy40 for sure. For real. If you do a search on the Google they actually found a Homelite in one of those Egyptian pyramids. Sho nuff.
@GhostSot Жыл бұрын
Make a video claiming that, its atleast 100 million views
@Tonedog88 Жыл бұрын
Bre puts out a comedy video. I love it! Chickanic multi-tasking at it's best!! Laughed through most of that one.
@happyhome41 Жыл бұрын
I’ve never seen a “restoration” video - at least for chain saws. With your intelligence and integrity, I don’t feel I’ve missed anything - though not seeing them I’m sure is dumb luck. Keep up the good work.
@ryelor123 Жыл бұрын
Its professionals in foreign countries who don't want do-it-yourselfers to fix things. They're only honest about repairs when its something that's no-skill(like cleaning) or when it requires machinery(like engine boring). However, when it comes to critical assembly stuff, they always make "unintentional" mistakes that would render the entire repair pointless at best. Professionals in those countries want business and they don't want their customers knowing how to fix things correctly. In fact, they want to punish customers who try. This is one reason why they insist on putting the chains on backwards or re-using burned up pistons/cylinders.
@Cameronm55 Жыл бұрын
Another video so helpful. Deeply appreciated!!
@craigpuetz7020 Жыл бұрын
As a homeowner who has actually tried to cut with the chain installed backwards you can guess which sections were my favorites.
@kevinruggles9180 Жыл бұрын
seeing the chain on backwards with a comment from you "see I even put the chain on backwards to make it authentic" would have been priceless.
@henrysmith8012 Жыл бұрын
Keep exposing these fake wrenchers.
@georgepruitt637 Жыл бұрын
She needs to look in a mirror !!!!
@christrouten9606 Жыл бұрын
I have a Husky 350 that the exhaust bolts vibrated loose and caused the exhaust gas to melt completely through the crank case into the bar oil reservoir. I ordered a crank case from Ebay and a brand new P&C for a 346XP to completely restore my 350. It took a long time but I eventually got through it and now the saw absolutely RIPS! Better than new. I wish that I had done a detailed video of that rebuild.
@kbjerke Жыл бұрын
Awesome, Bre! You got 'em! There are so many youtoob scammers out there. What do they get from their fakes? Anyway, love your videos, and as always, BEST to you!! ❤❤
@stevemains4590 Жыл бұрын
You are every gearheads dream girl. The only thing we love more than your videos is you. Keep it going.♥♥♥
@1djbecker Жыл бұрын
It's now apparently common for watches as well. Which is even more unbelievable, as a corroded watch has so little metal to start and no chance of working with the corroded parts.
@99unclebob Жыл бұрын
Thanks Bre , calling out the fakes is a good thing, most people won't know the difference, I am a DIYer and have been for over 40 yrs, I am no mechanic , I also have learned enough from friends who i have worked with over the years, I have been around chainsaws long enough to recognize when a chain is on backwards, LOL, after doing it and being told that Heh that ain't gonna cute nothin, your arse backwards, my buddy said, 😂 live and learn and i am glad for it and your channel 👍
@f.k.burnham8491 Жыл бұрын
Love your videos. I learn a lot from them. Those fake videos play on the stupidity of people. No way you are going to make rusty iron and pitted aluminum look "new" .They are an insult to my intelligence. Also the guy that found the saw in the tree is, I think, the same person that is in many other questionable DIY videos on YT.
@stevepelino59866 күн бұрын
Thank you for sharing this video. I’ve seen a bunch of these fake videos and to myself I called BULL💩 every time. Great job on grandpas saw.
@larslarsman Жыл бұрын
Proper V grooving of aluminum and proper welding gives you as strong or stronger than the original. Live in a foreign country? Innovation is king. Parts changing with OEM is great if available where you live.
@greggorjk8100 Жыл бұрын
You did a nice job on your Grandpa's saw and im glad you didn't operate it wearing sandals, sigh
@terrysims4028 Жыл бұрын
Great video Miss. Bre you rock.
@toddburgess6792 Жыл бұрын
I thought I was filing my chain wrong until my father-in-law showed me I had the chain on backwards. I still suck at sharpening, but the chain is going the right way!
@Mind-your-own-beeswax Жыл бұрын
Those fake videos are a right laugh. They find alsorts from motorbikes to kitchen equipment to iPhones lol. As you said most know they are faking it and say so but some don’t
@nbrowser Жыл бұрын
It's about time someone with as much knowledge as you busted these fakes...it's not a new thing but calling them out is nice.
@billbray5995 Жыл бұрын
Your channel and your 2 KZbinrs you collaborated with are the only repair channels I will watch. The rest a just fakes or repeaters of the same content already posted.
@airport4173 Жыл бұрын
what about you totally flumaxed by briggs 2hp where you thought recoil freewheel was a broken clutch? and you never retensioned or lubed recoil spring?? and ignored totally reliable points and condenser and cut off good coil?? what about getting crankcase gasket when it was a low hour engine. you forced plastic pickup tube when all you needed was carb loose to clear wheel. you never checked or adjusted valve gap but you lapped valves that makes valve gap tighter. you need to clean valves in a drill, not with a wire head in drill. you have clearly copied what you have seen people do but don't actually understand engineering.
@dudekanic Жыл бұрын
We knew the rewind clutch wasn't broken, but a new one was much faster. Points and condenser? Really? The electronic coils are much more available and reliable. The fuel tube has to be forcefully pushed into the pickup. The "gap" is called "lash" and was checked. Valves need to be lapped about every 200-300 hours, check your owners manual. We were at home not at the shop, so like most people at home who don't own a shop we cleaned the valves with what was available and this works great. This isn't "engineering" its repair, at home away from specialize tools.
@James-jx5uc Жыл бұрын
Enjoyed it as always I watch all your videos I don't comment every time but I read some of the comments and like them you are the best thanks for sharing 🌹
@GuysPlayingWithTools Жыл бұрын
I think they are doing it for humor. I can't believe for a second that he somehow found muddy pieces in trees(did it fall out of the mud, into the tree?) and cleaned the bar so well that the rust turned into paint.
@davidzarodnansky4720 Жыл бұрын
If you made a week long video, I'd watch it, because I learn so much about small engine repair from you. I might have to pause it to have meals and sleep, but I'd watch it...
@Barbarra63297 Жыл бұрын
I've seen so many of these type of videos over the years, they always crack me up and the bad acting is always good for a laugh!
@lonnieblackwell9215 Жыл бұрын
Good video. I love to watch your video's. What I like best about them is hearing to talk thru them. Keep up the good work.
@canvids1 Жыл бұрын
A great video. Someone that has been working at what you do for years! well you get pretty dam good and what you do. My last 10 years doing the same job before retiring. I watch on youtube operators doing the same job and yes you can see right through some of their videos. I enjoy what you post thank you.
@applehead252 Жыл бұрын
I just bought a battery powered saw and I’m sold . Going to the dark side. No more gas , carb issues, etc.
@lbeliel4128 Жыл бұрын
I found a Pouland leaf blower at a land fill about 17 years ago. The pull cord was hanging out of it so I couldn’t try starting it there. Took it home, took it apart, fixed the cord recoiler and, I’m still using it today. I found a fairly new mower in a complex dumpster years ago. Took it home, dumped the water out of the fuel tank (duh), put fresh fuel in it and bam, fired up after a couple of pulls. Sold that sucker and bought a new fishing pole!
@northwoodsguy1538 Жыл бұрын
Glad to see you are getting your building put up.👍 I have a 40 year old Stihl AV031 that is sitting under my bench that needs a carb/carb rebuild that looks brand new compared to those saws. Ft. Smith kinda of drive from Northern WI but I am sure you could get her purring like a kitten.😎👍🐈
@jeffsomers28 Жыл бұрын
Bre, You wayyyy outclass them all! Keep up the great videos and THANK YOU for advice.
@dtman66 Жыл бұрын
Love it! I wondered what the excitement was for it idling
@danpags7023 Жыл бұрын
I have two favorites, the Kubota knock off and the large shop lathe. They are super long, and all they do is wash a million pats, and both run like new..lol 👍🤣👍
@jimeckenrode1271 Жыл бұрын
Glad you explained your rebuild video.
@sirgeorgescott2995 Жыл бұрын
I’ve noticed that some of the fake electronic restoration videos are actually produced backwards. For example, they take a vintage stereo record it functioning flawlessly then they destroy it by fake aging it (plastic doesn’t rust). Then they take it apart and clean it knowing that it’s beyond repair. Of coarse they end the video with the first thing they recorded.
@BlackDogII Жыл бұрын
I really like the one where the guy bought brand new Stickers before he even found out if it had spark or even ran... He's definitely the glass half full guy.
@AlanSanderson-u4t Жыл бұрын
My dad had one of the Poulan Craftsman saws like the one you restored. I don’t know what happened to that, but I inherited his Homelite XL 12 that still runs.
@WilliamMcCone Жыл бұрын
Love your videos - learning a lot. Thanks from Northern Ireland
@christopherraso1990 Жыл бұрын
That was hilarious, and what's with all the red paint jobs😅. Love your channel, tip's, trick's and masterful knowledge and repair skills. 👏👏👏👍✌️🇨🇦
@jamessmith7691 Жыл бұрын
I have a similar Poulan saw that my brother had. Like you it was sentimental to me as he had it when he and I cut wood together. A cheap little saw but simple and tough as nails.
@bobrobertson2090 Жыл бұрын
I really like how the chain sags on the steel when he pulls it out of the dirt🎉