CGDI CG100pro.Airbag Restore Devices. One of the best Car-Programmers. Stop using clones anymore !!!

This programmer CG100 is one of the best at the moment for car repairs.
Apart from the fact that it stands out for the multitude of airbags that can be read, this is a very good EEPROM and MCU programmer.
You are not obliged to buy, I am just presenting another alternative !
The choice is yours !!!
You need one of the CGDI programmers, here is the link with manufacturer prices :
CGpro
www.cgdishop.c...
FC200
www.cgdishop.c...
CG100
www.cgdishop.c...

[@iancurtis9967]

Brilliant video. I decided to get more into eeprom work I had the mini pro which I’ve had some success with but decided to go for the CG100 which is aimed at the automotive side and used you discount code to purchase it. Many thanks and please keep these great videos coming. Now I want to buy the CG200 but will have to save up for that one.

[@YOYODiagnostic]

I'm glad if my videos can help you. Know that I do not want to influence anyone or make anyone make decisions or think that I am making these videos to convince you to buy, I am not a seller and that is your advantage on this channel because I talk openly about any product. Thanks for subscribe to this channel 🙂

[@HelgiThorisson]

Excellent video. I have both CG100-III (bought with your code) and iProg+ Pro v.87. If it wasn't for the terrible software (half-, un- or badly translated) the Iprog+ wouldn't be half bad (if you have a reworked unit that does not burn when plugged to 12V) but without a better software it is very limited or restricted. The CG100-III is in another league compared to the iProg+ in most cases.

[@YOYODiagnostic]

Thanks for your support. 👍

[@car-key-programming]

Like always great video. 👍. Do you have any saying about the obdstar p50 airbag crash data tool? Thanks.

[@YOYODiagnostic]

Thanks for your support. I have no experience with him. I don't want to give you wrong information.

[@siyaonline]

Great video, I wish I should have seen few months ago before I bought the chinese iProg+ V87 which had been a waste of money. There is no support or user manual for it and it hasn't read anything (OBD, keys or chips) since the day I bought it.

[@YOYODiagnostic]

I'm sorry for you.😔

[@ivanbejerano]

Hi on the cg100 does it erase the crash code automatically? Or I need another program?

[@automotiveprogramming]

Thanks for the video. Any thoughts on Airbag Service Tool made by Polish guys?

[@user-lt1wm4nl8e]

Thanks for this video, i was looking for a good airbag tool. What do you think about Digimaster 3? IT seems kinda outdated

[@YOYODiagnostic]

Hello, that programmer digimaster 3 is used more to manipulate Km.

[@IlirVeliaj-qf9hz]

Hello. I need please fo chosen device for reset crash srs. Thanks

[@Unbekannt-ov5gb]

Wieder mal ein sehr hervorragendes video und sehr interessant vielen Dank für deine Bemühungen Und meine Frage währe was ist der Unterschied zwischen cg pro mit dem cg 100 und was ist besser danke

[@YOYODiagnostic]

Danke. 👍 Das Video folgt !

[@abidzaid3260]

Can CG100 do airbags for recent cars like 2022 Honda, Nissan, and Toyota and so on. Such as Infineon and Renesas ?

[@YOYODiagnostic]

I don't know. I don't work on Japanese cars , sorry.

[@galidbell5029]

I almost bought the CG100 but I read somewhere that you cannot load a dump which has been read with a different programmer...

[@YOYODiagnostic]

I will try this and I will make a video for you. Please be patient I'm on holiday.

[@fuzzs8970]

That's not true. You can write from other programmer as long as it's not crypted However it's not as forgiving as original UPA. Original UPA is cheaper

[@Manuel-ig6wt]

Which one's better for mileage correction cg100 prog lll or cg100 prog lll full version.

[@YOYODiagnostic]

I don't have experience with mileage correction. I cannot give you the wrong information .

[@issakhleif973]

Is it better than vvdi prog ( with free updates )? Also they seem to be at the same worth of money

[@YOYODiagnostic]

Vvdi is ok but I don't like that it has the same firmware for 5 years, unfortunately they updated the software several times but not the firmware. It's a bit outdated if you compare to the CGDI company at the moment. One downside to CGDI is that if you want performance you have to get both CG100 and CGpro. Even if you have to pay for the Update at CGpro, it's only 20 euros per year, so it's okay

[@Lewy1187]

Hi mate whot you Think about Programator AUTEL XP400 PRO do IM508 IM608

[@YOYODiagnostic]

Hello, it is a good programmer but if you have IM508 or IM 608. Its price is quite high compared to VVDI and CGDI and it is not a competitor for these programmers.

[@algeriathelandofterrorists3329]

Can u check with the cg100x if they got the same software and cover

[@YOYODiagnostic]

Ok. I will check and make a video

[@algeriathelandofterrorists3329]

@YOYODiagnostic thanks bro if they got the same software I would rather to get the cg100x

[@TNTMarcel]

Does do tool also reset the crash data or we need to do it in another software?

[@YOYODiagnostic]

Hello, many models are automatically repaired by the software, but you do not need to disconnect the programmer from the Internet while doing this repair

[@mohamaditani451]

Does the FC200 do the same thing as the CG100 ?

[@FireSolutionsMxl]

Totally different, FC200 is more like Ktag, eeprom and flash read from ECU/ECM for cloning or tuning.

[@david-443]

Hello Friend. Is this device original?

[@YOYODiagnostic]

Hello, yes is original product. 👍

[@ibra29]

[@YOYODiagnostic]

👋