Kess v2 Red PCB. Wake up Error . Protocol not Found. Card Update. Image replaced. Problem Solved.

[@karlwatson45]

This video is brilliant 👍. Exactly what I needed to know thanks for the upload.

[@YOYODiagnostic]

Thanks

[@khalilhnini4528]

le ficher de sd card svp @@YOYODiagnostic

[@YOYODiagnostic]

I will help you to fix for free on what Chinese manufacturers have fooled you. And many of you are asking for help but you don't even have the respect to subscribe. It will cost a click. I'm not asking for anything in return, to grow this channel in which I invest my free time.

[@dominikpiestansky5266]

Hi my friend how much for sd kess red.img ?

[@YOYODiagnostic]

@@dominikpiestansky5266 I'm not a seller .

[@chrisi2022]

Can you please help me out with the software I am follower of you since I startet Tuning Cars

[@hdmracing7753]

Hi! Its a good video, but can I please get that SD image.

[@speedmasterecuremap]

How I get the Software in that Memory Card?

[@bluspirit81]

Where can I find the files to put inside the sd card?

[@francescoscarselli_mix]

Where I can find the Image file? I have I think the identically KESS like you and I receive wake up error on an EDC17.

[@dariusyeck]

Hello thank's for this good video :) what kind of charging battery do you use during programming?

[@YOYODiagnostic]

Hello, If I write this ECU at the company headquarters, we have something from Bosch, if I have to go to the Customer, I choose to connect the cables from my car to the car that is to be programmed. In 14 years I have never had problems using this variant.

[@detijonmorina3595]

Hello it seems the problem is exactly there , but where can i find the Image files ?

[@markc8671]

where can I download the image from

[@YOYODiagnostic]

I'll give you the picture only if you tell me how many times I posted the email address in the comments only on this video. 😂 I can't believe that you don't want to inform yourself at all or take even 2 minutes and search for information.

[@westcoastprojects01]

Hi mate . Have you got the file still . I have a brand new kessv2 that has the issue on wake up

[@clapeye3759]

I need help. product doesn't work. Can you send me what was on the SD card in the PCB board?

[@benjaminjr-tech9103]

Hello, please could you send me the link to download the Image?

[@ivansound86]

hello, could you tell me where I can find the 69mb deel kess v2 .img file?

[@LAMAQUINAELECTRONICA]

hello friend I have the same one, I bought it in China, it arrived like this, I put the 2.25 and It says that, change the USB cable and charge the 253 and it says the same thing. kess v2 black 5.017 ....error---external exception eefface---and it won't let me open the program, can you know what I should do, thank you I have the same ktag 7020, I plug it in and the software works fine, I put it in and it says that error en el kess

[@raylightvonhaze5893]

Hey mate, where can I get the image from ? Thanks

[@Onzaable]

What a very informative video mate, as my last hope can have the image mate.

[@20VTRacing]

Great video, thanks a lot!

[@dujakovichdanijel]

Is the sd card cid sensitive? Must I make new card the same cid as old one? Thanks for video!

[@YOYODiagnostic]

Hello. This image I use must have the Kess card. is CID sensitive. if you do not have the original card it is another image.

[@rafiekahmed8568]

Hi how do get the image file to fix this wake up on

[@injektronicf6121]

I can't read a magneti marelli 7gf. The software tells me to change the speed. I go to the option, I change it and it still doesn't work. Is there any procedure?

[@YOYODiagnostic]

The first time we should say ,"Hello". 👍 For it to work, you have to rework it. Poor quality parts must be replaced.

[@syedkechik]

Great job, tq so much for sharing this sirr

[@YOYODiagnostic]

Thanks for watching. 👍

[@LuboVitanov-vd8eg]

hello yoyo, where can I download the file to install on the card

[@roberta.6295]

Im getting Connection Not Established when I open the application. But I am using the Ktag box, red PCB-China, I just have the box connected to the 12V supply and the USB cable connected. I have not connected any cables to the ECM. Maybe you can give me some advice? Any help is much appreciated!

[@YOYODiagnostic]

Hello. if you think you have made the connections properly try to adjust the current to 13V. if the board is not rework the parts are not quality. I remember that once I managed to connect to 13.8v. If nothing happens, try to supply the ECU separately with 12.V.

[@roberta.6295]

@@YOYODiagnostic Thanks I will try.

[@viridian6903]

@@YOYODiagnostic does the red pcb its high quality

[@YOYODiagnostic]

@@viridian6903 Hello. There is no high quality clone, the clone is the clone. The red one is I think the only one that can be found today on AliExpress or eBay. Don't be fooled by commercial,after you buy it, the seller will not answer you if you have a problem. What to do? You can buy parts and make them full Rework to work acceptable,but it won't be fantastic.

[@talalmedia]

Any advice for SW CONNECTION ERROR

[@YOYODiagnostic]

Hi. To understand that when you connect the usb cable you can hear how it connects, and when you try to start the software you have this error? The software error is due to the Ksuite program not communicating with the kess device. There are several searches and remedies: 1. change the usb port and reinstall the driver. 2.reinstall the Ksuite software again. 3. use a new usb Cable. 4. reinstall a new Windows and Ksuite software. 5. this tool have a chip protection on Board (the UL46 USB chip), must be replaced. 6. FTDI chip problems (needs to be replaced). Try the first numbers to see if you fix the problem(1 to 4 ).

[@michaelmcintosh2594]

How do we get the image

[@ruudwiefferink9583]

Hi, @YOYODiagnostic, i have the same problem here, can you help me with the iso file. I have KESS 5.017

[@radulescusanduradulescu7270]

thank you for img kess v2 it works perfectly thank you again

[@YOYODiagnostic]

You welcome. 👍

[@بلقراويياسين]

@@YOYODiagnostic please send me the file

[@radulescusanduradulescu7270]

please send me a hex dump for reprogramming fvdi 2015. Thank you

[@adrianchoma2271]

hello, I have the same problem with kess v2, but this solution didn't help me. Can you think of what else could be causing it, maybe some hardware component??? thank you for any advice otherwise nicely processed helpful video

[@arielcor7392]

Hello. I want to use Kess 5.017 for Delco E83 protocol 380. It is for a Chevrolet Sonic / Aveo T300 A16XER engine. You wanted to know if it is okay that the identification does not read the type of engine. Only figure motor: yyyyyyyyyyy.

[@YOYODiagnostic]

Hello. Many times nothing came to me and I wrote and read without problems. It is important to make a checksum correction!

[@ciao9]

Ciao, ho un kess 5.017 e vorrei utilizzarlo con ksuite 2.55, è possibile? Se si come? Puoi aiutarmi?

[@groobo1]

hi i have problem with edc16c39 fiat , error write code :/ can you help

[@c.v3837]

Hello ! Thanks a lot for this video ! I have also sent an email for the iso file !

[@anupsur7698]

Sir , I have ktag 2.25 red pcb clone. Can I use ktag2.70 on ktag clone box?

[@YOYODiagnostic]

Hello. This version 2.70 does not work on the Clone, version 2.25 is the last option., Stick to it because it is stable.

[@augustinkouaoamonkan4854]

Hi Mr. Yoyo, congratulations for this very instructive and formative video. I am a fan of automotive electronics and also bought a Kess v2. Can I have the file and the method of correction of the wake up. Thank you

[@YOYODiagnostic]

Hello. Send me a email to,, [e-mail] ,,

[@augustinkouaoamonkan4854]

HELLO my dear YOYO, I sent you an email to have the image of the sd card to correct the ''wake up''. But I did not receive any files. And I can't send you emails anymore. I follow your videos and appreciate what you do. PLEASE send me the link by email to correct the wake up of my Kess v2. Thanks for your understanding

[@YOYODiagnostic]

@@augustinkouaoamonkan4854 Hello. Why don't you know how to be patient ? Do you think I'm sleeping in front of the PC? Please be patient i can't reply to email every day because i work every day, when you ordered this product in China did you wait 3 weeks for it to be delivered and now you can't wait 48 hours? Check your email.

[@augustinkouaoamonkan4854]

HELLO my dear YOYO, sorry to have bothered you. It's understood. Nice day.

[@augustinkouaoamonkan4854]

my dear YOYO, I just saw the file. Thank you very much and I continue to follow your videos which are very informative. Be well

[@antoniojorgamaral]

Hi friend, your videos are great and very didactic, I'm really enjoying it! I'm from Brazil and professional in automotive electrical, I'm now joining automotive electronics. I had problems reading the IAW 4AVP module with the kess 5017... I would like to try to change the image of the sd card to see if I have a better result. Thanks in advance and I recommend your channel!

[@YOYODiagnostic]

Hello. Send the same message to the email address to let me know who wrote it

[@antoniojorgamaral]

@@YOYODiagnostic ok, the email has already been sent, I sent it in the same email I saw you passing on to the other members in the comments.

[@YOYODiagnostic]

@@antoniojorgamaral Check your email ☺️

[@marcosmarkin]

eu to com o mesmo problema, to tentano ler o do meu gol mas sem sucesso, vc conseguiu

[@radulescusanduradulescu7270]

@@YOYODiagnostic please send me a hex dump for reprogramming fvdi 2015. Thank you

[@dennisrogova3769]

Hi how to i find the file ?? Where do download

[@filipbalaz2053]

Hello Yoyo, sorry for spamming your YT chanell, but question is, i have just recieved KESS From china, so its CN clone, without any modifications, which version should i use? on sticker there is 5+ version, program is 2.8, what do you recommend to use as a most stable version? Also should i do this SD card trick in advance to remove potentional problems? thank you! Br Filip.

[@YOYODiagnostic]

Hello. Not necessarily . The most important thing is to see what parts it has inside. You can also use 2.80

[@christophett9694]

thank you very much sir ...

[@YOYODiagnostic]

👍

[@officineinformatiche865]

Hi, I have the same problem, with Kess V2 red PCB. Where can I find the image? Thank you

[@YOYODiagnostic]

Hello. First you subscribe and then send me a Mail

[@broskis80]

​@@YOYODiagnostichi, could you share image/file with me please ?

[@syedkechik]

Tq for sharing sirr Very helpful

[@YOYODiagnostic]

👍

[@IvanStage88]

hello friend, I have the same problem with the kess that I bought a few days ago, I can only check the ID but in read mode it throws me "address error for reading" can you help me?

[@YOYODiagnostic]

Hello. Wich ECU?

[@IvanStage88]

@@YOYODiagnostic the error is from the sd and I don't have the iso image, I sent you a message in Gmail

[@homadu1830]

I’ve been having the same problem where can I get to download the image file

[@YOYODiagnostic]

Hello. After you subscribe and like you send me an email at ,, [e-mail] ,,. I want this channel to grow to form a larger community. Your price is a click.

[@glorygori7029]

Your video is greate and realy informative and gave me hope that my kess is fixable. I subscribed to your chanel to suport you!. I would like to fix it my self but i would need the file... can you tell me where i can get it from? Also thank you so much for making this awesome video you helped me a lot!

[@jorgeromao3128]

Good night. My comment appears to have been removed. Here's a nice tutorial that will help a lot of people. Thanks I already sent you an email

[@ellissprice7141]

Hi I don't get wake up error, but no protocols found at all? Any ideas?

[@YOYODiagnostic]

Hello. 1. appears because your card was written incorrectly. 2. the card makes no contact on the board and cannot be read (remove it and clean the area with alcohol). 3. if you still unpacked it, program the card.

[@ellissprice7141]

The device was working fine previously, mapped my vehicle earlier the same day and now nothing, the card appears to be contacting fine also

[@YOYODiagnostic]

@@ellissprice7141 Hi. I told you what to do. I gave you some advice, did you follow that advice? I don't want you to think that I'm arrogant or that I don't help you, but I practically explain the same thing twice, because your error is related to the Card. If you rewrite it does not work, reinstall Windows and the program, if it doesn't work then buy another card

[@ellissprice7141]

@@YOYODiagnostic I don't understand your comment, are you saying 1. I should try and re-write the card first, 2. If that fails try reinstall the programme and windows on PC? 3. If that fails then purchase new SD card? Correct?

[@ellissprice7141]

I have emailed you

[@the-darck-men9777]

Hi, your video is amazing. I have a question, where I can get the file?

[@gintarus7029]

Hello, im having problem with kess clone, not the same but maybe similar to this. Kess always showing RSA error..maybe You have any ideas of solution for this problem? I tried on different computers and its still same... I dont know how to fix this and still looking for solution unsuccesfully. Big disappointment 😞

[@YOYODiagnostic]

Hello. Write me by e-mail to send you the image and a version of 2.70 or 2.80. these clones are unpredictable

[@pierrebugeja9904]

Hi, is it possible to obtain the file please? Thanks

[@AhmedFawzy-v9u]

thank you very much .

[@mohamedsabri1764]

I have error says access violation can you help me

[@kengedition8604]

Nice video I need to download SD image thankyou🙏🏻

[@YOYODiagnostic]

Hi. Check your email

[@kengedition8604]

@@YOYODiagnostic thank you so much.👍🏻👍🏻

[@بلقراويياسين]

@@kengedition8604 can you send me th file

[@piduino]

Can you please share me the link too thanks ❤

[@marcomarco6819]

Hey buddy can I have the SD car image too. Thank you in advance

[@quadowygaqu6627]

I have problem with writing the golf 7 gti 2013 „generic error“ help me pls

[@YOYODiagnostic]

Hello. It doesn't work on this ecu it's too new for this clone. Use the original or another programmer that can read Bench.

[@aqib4573]

Hi can i get the sd image...

[@sara78130]

Hi where I get this card file I same problem 😕

[@YOYODiagnostic]

Hello. First you subscribe to channel and after you send me an Email.

[@sara78130]

@@YOYODiagnostic sure men

[@sara78130]

@@YOYODiagnostic 😂😂 sorry

[@brunoricos-olhos5033]

Hello i no undarstand what is a diference capacitor and filter i want up grade my hardware clone kess v2. Its possible help thanks

[@YOYODiagnostic]

Hello. I will make a video soon and give all the details. have a little patience please. thanks for viewing

[@SylvainWeisse-s2k]

Bonjour merci pour votre vidéo ou pouvons nous trouver le fichier image s'il vous plaît Merci

[@piazo7550]

hello Do you have the sd card image file. My kess 5.017, SW2.47 i can do it and update SW up thanks

[@YOYODiagnostic]

Hello. I sent you but the first rule of respect on this channel is to subscribe if we ask for help it doesn't cost you anything. The second rule is not to post your personal email addresses on the channel. I gave you my contact address ([e-mail])

[@YOYODiagnostic]

Hello. send me a Mail

[@gediminasindriulis5273]

Very good video 👍 I need to download SD image thankyou

[@YOYODiagnostic]

Hi. Send me a Mail. [e-mail]

[@kostadintodorov868]

hi i have problem with my kess v2 5.017 2.23 protocol 203 error programmer

[@kostadintodorov868]

I need sd image thank you

[@alexandru-bogdannaghi8532]

Hi! Can you help me with the img please?

[@НиколайНиколов-б9ж]

Can you send to me the .IMG file, and can i ask.. is that only for KESS or i can use on KTAG same

[@YOYODiagnostic]

Hello. Yes send me a Mail

[@НиколайНиколов-б9ж]

@@YOYODiagnostic I wrote you an email, did you receive it

[@nsarov]

Thanks a lot , good man !

[@YOYODiagnostic]

👍

[@marcokastaline5975]

danke fur this video it's top !!!

[@YOYODiagnostic]

Thanks for the appreciation. (Gerne und Danke fürs anschauen

[@marcokastaline5975]

@@YOYODiagnostic can you help me , i need this image but i don't know where i can founded, do you have this image? thank greetings!

[@YOYODiagnostic]

@@marcokastaline5975 Hi. send me a mail to [e-mail]

[@marcokastaline5975]

@@YOYODiagnostic Hi I have sending e-mail on the 19 oktober and yesterday I have sending again on this mail Thank you see you ;-)

[@YOYODiagnostic]

@@marcokastaline5975 I sent you a link from where you had to enter to access. I can't send it to your email address because it's too big. I will write you extra when I send you the link. look at spam. I know I sent you an email. please look to you in the mail.

[@danborgarhansen3524]

hey Can somebady help me whit the fil for kess v2 5.017 sd card real fil tha have 69mb not less that not working. i have to make new sd card. but this fil i have its 43mb and it wont work.

[@YOYODiagnostic]

I asked you all not to ask for help here, we are not at the Bazaar. First time you subscribe and then send Mail. I left you the address and you don't even bother to read it.

[@inglot6645]

HI .the same sd card is for ktag?

[@YOYODiagnostic]

Hi. No

[@inglot6645]

@@YOYODiagnostic Thanks. have You got files tkag sd ?

[@alexgebenei3798]

Hi. I need Sd card file for my kess 5.017, can you help me please sir ?

[@Frank290578]

I had placed the link here with the files but youtube immediately deleted my message.

[@autotuningservice]

Nice video . Thanks

[@YOYODiagnostic]

Thanks .

[@sergopeccator3874]

Hello Friend, help with the file, kess v2 doesn't want to work

[@YOYODiagnostic]

Send me a Email

[@bradh411]

Hey can you please email me the image file, I have been desperately trying to figure this out and this EXACTLY what is happening with mine...

[@YOYODiagnostic]

Hello. Send me a Mail. " [e-mail]"

[@bryanjamesgaculafgmecurema6014]

can you give me oo

[@MrBregenss]

Hi there! I see you have allot of experience and knowledge about diagnostics... Great work! I would be very thankfull if you would share img file to me...

[@sashokamberov4065]

Hallo, YOYO! I have the same problem with my KESS-WAKE UP ERROR*! Thanks to your video I understand whatwas happend with it. Can you tell me haw to find the sd card file? Thank you in advance! Wish you all the best!

[@joshyk6878]

hello i have same issue ,how can i get file sir

[@YOYODiagnostic]

Hello. First you subscribe and then send me a Mail [e-mail]

[@pakico600]

Very good video and well explained... I have problems with kess, it says kess v2 master external exception eefface... could you help me??

[@filipbalaz2053]

hello, already sent you email for this problem. thank you!

[@DaVe20DNB]

Subscribed! Can I please ask you about the files? Thank you in advance!

[@marcokastaline5975]

ho Yoyo I have trying Wish what you sen me but it’s Not working, it’s Write the Same Error Message , do you know why ? If you can help me i’m happyness, thank you See you

[@radulescusanduradulescu7270]

kess 5.017 I have the same problem I do not know what to do I'm inebunit I would like please nice to give me and I sdcardului image . Thank you in advance

[@pessimistbaron]

Hi please link for dowload the file please Thanks so much

[@ByBpt]

Hi. Do you have some vídeo, or a plan for some vídeo, for reworking kess/ktag? Best regards

[@YOYODiagnostic]

Hallo. a video with a complete rework will follow

[@ByBpt]

@@YOYODiagnostic Hi once again. In your opinion and based on your work, what is the best and more stable version of KSuite for this Ktag/Kess clones? Thank you! Regards

[@YOYODiagnostic]

Hi. If you want to use both with the same software stay at 2.23. If you want to use them separately Ktag 2.25 and Kess 2.53, or 2.70. the latter support newer protocols

[@orlandomondlane68]

hi sir is very good presatation can you please help with the image where to get it

[@yacineshop9380]

How to fix kess v2 external exception eefface

[@YOYODiagnostic]

Hello. (first of all) This Error is related to the usb port. 1. Replace the usb Cable with a new one, it is preferable to get one from the Printer because it is higher quality. 2 . Install the Driver again and change the port or cable position in the laptop. 3. Take the Card out and clean the alcohol contact surface. 4. If all this didn't work you have to replace NXP with a new one.

[@xXbox360Gamerx1994]

Hello can you send me the link for the file?

[@YOYODiagnostic]

I don't offer support anymore. 👍

[@mecanicaeldorado7981]

HELLO MR YOYO I HAVE A MERCEDES TRUCK PLD MODULE THAT IS GIVING PROTOCOL ERO THIS PROCEDURE I CAN READ MY KESS AND CHINA CAN YOU HELP ME I'M FROM BRAZIL

[@YOYODiagnostic]

Send me a email

[@paulojrjr1569]

Hello, okay, my Kess is having a problem with SD, you could help me with your file my friend.

[@YOYODiagnostic]

Hello. Yes I will help you. First time you subscribe and then send me a email.

[@paulojrjr1569]

Ola I sent the email

[@YOYODiagnostic]

@@paulojrjr1569 You don't have to send email after 10 different addresses in 2 days, you think that way you get help faster, that means I'm busy and working. You broke my nerves, please be patient next time, because I don't sleep in front of the PC, I have to work to pay my bills. Didn't you pay any money to insist so much, when you paid the Chinese to come that clone shouldn't work? and yet it arrived at you after 3 weeks or am I wrong?

[@lukafullhd_yt6280]

I want this files to upgrade my protocols my software is 2,23

[@jamesmartin3826]

Hi Mate, please could I get the image file. Thanks

[@jamesmartin3826]

not heard back , don't worry about it , found an easier method.

[@YOYODiagnostic]

Hello. I'm so sorry I didn't Help you so quickly, but you think I'm sleeping in front of the Computer. When you bought that shit from China you waited 3 weeks and when you have to receive something for Free you can't wait? It's hard for me to understand this thinking. I'm glad you solved the Problem and I hope I'll Help you another Time

[@sergopeccator3874]

Привет Друг, помоги с файлом, kess v2 не хочет работать

[@claudioespejo9553]

Hello bro, the video is very well explained, how can I repair a ktag that is blocked?

[@YOYODiagnostic]

Hello. Yes, email me!

[@prattandwithny]

nice

[@leckacress837]

hi there great video i am also a fan of automotive lectronics and also brought a kess v2 can i have the image file please for the sd card inside the kess box cheers

[@marcokastaline5975]

Hi Yoyo and thanks again for your helping , i have looking on the web for sd card img but i don't found it, i have h speaking with the chiness seller and he don't would like help me, i have the same opinion for your, i think the seller don't guive the true sd card with kess for the buyer buy the new sd card on his shop...

[@dxturbodiesel804]

good night I'm from Brazil, I'm afraid you can do this via remote access

[@dxturbodiesel804]

Emel. [e-mail]

[@blainehanks1052]

Can i please get iso file and burner app please

[@justinalldredge8206]

i need the sd card image please

[@moinmona31]

dear sir my memory card is crypt. please send me img file kess 5.017

[@tahaali84]

Hello, I sent you an email today. I am in desperate need of this image file. I would really appreciate if you can help me with this problem .

[@tahaali84]

Can you please share the image file .

[@YOYODiagnostic]

Hello. Send me a Mail [e-mail]

[@Elayoubi]

​@@YOYODiagnostichi bro can you share link for img file please

[@eldrigerios]

Hi, You have the file? :( i have the same problemt

[@YOYODiagnostic]

Hi. I think you wanted to ask if I give you not if I have. Send an email after you subscribe to the channel

[@eldrigerios]

@@YOYODiagnostic ready, im suscribe and send U a email

[@YOYODiagnostic]

@@eldrigerios Hello. I saw it and I sent it to you,but please be patient that I answer you all. It takes a while because there are more and more of you, but if you are waiting to come from China with problems after you have paid, you can wait a few days for something for free. :)))). Thanks for watching

[@بلقراويياسين]

@@eldrigerios can you give me the file please

[@kaiquedurce2928]

Please i need this image

[@martynellis410]

hello do you have the sd card image file please that you used on this video that you could please possibly send me as i have had to put a new SD card in my kess v2 but now i need the image file to programme onto my new sd card many thanks

[@YOYODiagnostic]

Hallo. of course I help you. send me an email address. but when you ask for something you can at least subscribe and like it, so we can create a bigger community.

[@martynellis410]

@@YOYODiagnostic I have liked and susbribed to your channel already and my email address is [e-mail]

[@martynellis410]

@@YOYODiagnostic also since replacing my sd card on my kess v2 unit I am getting the message no protocol found all the time now when I am trying to click on veichles on the list could you help with this problem any advice would be appreciated to help solve the problem

[@YOYODiagnostic]

@@martynellis410 did you replace the card with another card coming from kess or a normal card?kess cards are special CID encoded cards. it will only work if you buy one on aliexpress. it costs 8 euros. and then I'll send you the image you need to write so you don't have any more errors. if you have a card that was on another kess then it will work

[@martynellis410]

@@YOYODiagnostic I just used a normal sd card