Yukon Raptor Paint Job

[@ElGordo_831]

I’m not here to put no one down, just showing respect, i see two young fellas trying to make an honest living. Keep it up muchachos!

[@RaptorPaintJobsRGV]

Thank you sir, 👍🏻👍🏻👍🏻

[@terrancemangal4862]

Good job keep it up

[@joshuarussell484]

Pls wear a mask 😷 next time ... my lungs are itching just watching . great 👍 job on the paint job nice to see productive young men work . Don’t stop. All gas no breaks

[@RaulsSonidazo]

Their the primos that do it for the low😂

[@robcarrillo3130]

Draztik Khaos still a great ass job 🙌🏼🔥🔥

[@jjhgggjg6312]

Lmao. Too funny cause its true. Orale homes

[@Kevincheesepizza]

Racist

[@crispedc]

They’re

[@Kevincheesepizza]

@@crispedc they are

[@SantiagoMartinez-qc2ni]

Why don’t you remove the Yukon emblem and just put it back when you’re done painting

[@NANI-jr7cn]

Santiago Martinez it wouldn’t stick

[@colteng9721]

Definitely wouldnt stick to bedliner. Was just thinking that myself as I read this comment. But then you'll have an ugly no paint spot if you'd ever take the emblems off. Kinda a loss in both scenarios unless you'd be okay with removing the emblems

[@camilogallegos6820]

It would stick.. just have to warm up the double sided tape a bit

[@bmerrell41085]

You fellas did a fine job. Looks great. You worked very hard. Good job!

[@claudiomacias6304]

Why wouldn’t it stick? Notice how they stuck the badges on rear

[@allamericantruckguy1143]

Best way to remove the sticker is with a heat a gun

[@bac4998]

I disagree, an Eraser wheel is much easier. Specially made for this application.

[@mr.themac9956]

Ya after u remove it with a thin wire. Eraser wheel 👌🏽

[@devincortes1279]

BAC smells terrible lol but works

[@jerellhurtado9486]

Not on a truck that old.

[@devincortes1279]

jerell hurtado meant the eraser wheel lol

[@Alpha-jg9mi]

Came out better then I expected, Only suggestions I have is always cut out rusted and rotted metal and patch with new metal,and also use paper under the hood to prevent all the over spray that was all over the engine bay .

[@OG-yp3wx]

You guys seem to be doing a good job just a small tip whenever you’re sanding around the headlights or taillights or anything that wasn’t going to be sanded tape it out be more careful I noticed you sanded on the rear taillight a bit . But other than that keep up the good work

[@colteng9721]

I would've removed the headlights and tail lights so the paint can wrap around the edge instead of having a sharp break, but everyone has their own method I suppose

[@vzangla]

these guys are sent from above. NOBODY around me is doing this. God Bless these dudes.

[@alfredlearlyjr1780]

Gentlemen, I've taken the time to review others applying the rapture product. It's your energy and desire for perfection that's making others using the product nerves. I watched the class you attended on how to apply the rapture product. It's my opinion, your technique is full of energy and precision. others are not taking the steps your taking to accomplish the very high degree of complete application of Rapturing a vehicle. your coach is spot on, making sure your product is acceptable to the public. you've taught me what to look for in others. Your the best right now, stay in school , remain humble, listening to your coach. blessings men.

[@JuanHernandez-sh9kh]

How many bottles of raptorliner did u guys use for the tahoe

[@villianz3638]

Y'all need a mask when sanding bro it all effects u when you're older

[@talkingwithlos]

@Barbosa Uribe you make us look dumb..... We don't do shot right 😂😂😂

[@ElReySupr3me]

@Barbosa Uribe if your a smart Mexican u do it right. L

[@AdielsHats]

Barbosa Uribe mannnnn 😂😂💯

[@hawkie333]

Yeah, those kids may not smoke, but they’re getting 2-3 packs a day from that dust. It’s no joke, and irreversible. The cost of the respirator cartridges can be built into cost of job, still way cheaper than line-x.

[@juniorlopez8206]

Needed to cut the rust and weld small patch that’s the right way

[@xavierchavez594]

it's an old car anyway. that is not very cost effective.

[@midwest_muse]

Not sure if it’s a father or who the cameraman is but it’s really nice to hear all the encouragement and kind words towards their work ethic and final product. Keep it up 👍🏻

[@Delfi1900]

Of course everyone will comment on how they would do the repairs on the roof a different and better way!! But when I see two young men earning money by working and trying so hard to better them selves!? then that’s a huge thumbs up!!! 👍🏼 you are doing way better then all those haters making negative comments!! do people really think Chip Foose started of knowing everything he does today!?!?! No way!! Good job guys,,,👍🏼👍🏼👍🏼👍🏼👍🏼🇺🇸🙏🏼

[@RaptorPaintJobsRGV]

Thank you sir, your support means a lot to us 👍🏻👍🏻👍🏻👍🏻 We will continue striving and improving our skills

[@RhinoJoeOutdoors]

Love how hard these guys work! Is it perfect? No but dang it they are working their asses off and making money! Respect

[@christopherlaboy9377]

Man this channel had so much potential; I could have seen them knocking on the door of 25 to 50k in subs, and potential collab videos with some HUGE youtubers Texas as well as setting up booths car shows. The sky was the limit here, you know you have something golden when you have someone willing to ship his rides from the east coast to Texas pre-covid.

[@brookknoepfle3276]

These young cats are putting in work. Good on you

[@MrKahunadog]

You guys are incredible... young entrepreneurs. Dream BIG

[@pick3statcat]

Please tell me how many quarts did it take for the Yukon please.

[@sp1epiphany]

Saftey first guys! Glad to see yall taking that seriously!

[@solomongonzales7224]

At video time 12:44... * “OH FUCK ... THE PROTECTION !! “ . That was epic

[@Godisgood778]

Mask ur face all the time, protect them lungs GOD only gave us 2 of them.

[@jodyrowe8166]

My god is a cashew

[@alexdelgado3704]

The way my guy put the bondo had me questioning the paint job but it came out pretty dope .

[@RaptorPaintJobsRGV]

Thanks for your support brother

[@alexdelgado3704]

Raptor Paint Jobs RGV keep it up bro’s 💯

[@mdevidograndpacificlumbera1539]

That fiberglass bondo is a bitch to spread. It's not like the pink stuff

[@vikingrus94studio33]

Inspiring to all the young business starters, keep up the amazing work.

[@mrpresident5186]

I'm impressed, that came out amazing. Awesome

[@matlockmitchell9216]

Good to see potential in these guys. First guys...get a mask.. Protect your health..... I'd remove lights, weather stripping and emblems too. Keep going guys.. Like the building

[@louis3998]

Good job guys. Read some of the comments. I think some of the guys that have been doing it for a while are leaving you some helpful tips. Remember there is always someone out there that knows more than the other guy. Subscribed to your channel. Keep up the good job

[@RaptorPaintJobsRGV]

thank you sir and yes, we take all honest advice into consideration and apply it

[@alonsocarrerafrost]

Respect your guys work ethic raised right Latinos STAND UP. Respect from LHC, ARIZONA

[@RaptorPaintJobsRGV]

thank you sir, we are just trying our best

[@jdquick9526]

Honestly I was skeptical at first but it turned out fantastic. Y’all did a badass job

[@garyholmes3385]

hell yeah yall did a great job

[@SaucySoviet]

awesome job, boys! Like seeing young guns getting into an honest work! keep it up, bros

[@RaptorPaintJobsRGV]

Thanks for the support brother!👍🏼

[@davepelfrey3958]

It came out looking awesome guys. Really nice job! Super clean.

[@KameronKinser]

How much raptor paint did you use in total for the Yukon?

[@TheChurchIsLikenUntoTheMoon]

That white raptor line is legit

[@BrazyN8V]

How much white paint y'all add to the raptor liner??. I wanna do that to my truck

[@INOMORETHNU]

This is awesome guys! I am getting ready to do a 2001 Econoline but am going to do a metallic frost white. Great job gents. Be careful you don't get shut down over some bs about chemicals of business license! GOD Bless!

[@nightmaremike1092]

Slowly but surely my dudes 💯👊🏻

[@RaptorPaintJobsRGV]

Thanks for the comment Mike 👍🏻👍🏻 Slowly, cool, calm and collected brother

[@Probe253]

Hoyes! put some Rapter gravel down to keep the dust down! Spray the gravel down with water then bring the Trocka in. Whallah!

[@bigcountry-cr9fu]

Have you guys done a darker grey yet ?? I'm restoring my lifted 2nd gen dodge ram and have it all tore apart bumpers off bed off I'm almost.dont grinding frame and painting with a self etching primer then a enamel base black metallic and I really wanna do raptor liner with darker gun metal grey but havent really been able to find the grey tint I want yet

[@miguelangelsanchez8586]

Hey guys good job. Now i got a cuestión. Im trying to do my Crew cab Silverado 1500. How many bottles im gonna need?

[@OscarOrod]

The kings of DIY!

[@RaptorPaintJobsRGV]

Brother, your too kind!!!!! We are just trying our best and learning as we go brother, THANKS FOR YOUR SUPPORT!!!! 👍🏻👍🏻👍🏻👍🏻

[@TexasToxxxico]

Fuego........... Nice job guy's

[@michaelkester3881]

Wow that turned out great best one I've seen yet.

[@adamhaayer6809]

Looks amazing. Do the z71 stickers stick to the raptor paint very good? How much product did this tahoe take?

[@willwrk4gunz]

How much raptor liner did you use ?I want to do my Yukon in a charcoal raptor liner. Just want to get the material ready

[@BLACKRAIN390]

I SEE YA DOING A GOOD JOB FELLAS👍💪💯💯💯

[@scottoberhouse8602]

What size kit did u guys use ( how many bottles) this is the same body as my 01 tahoe...i wanna do this in the lime green and black ..looks good guys

[@adrianlopez8796]

I give you guys the respect for trying keep up the good work !!

[@scottcameron35]

I have a 2002 Jeep Grand Cherokee. How many bottles does it take for a truck this side? I’m about to order so I can do my own after watching your are by step series.

[@kennethoros4043]

You guys work hard. Nice work. i wish you alot if success.

[@phillipmadrid8758]

Sanding with fiberglass is very bad without a mask

[@stevenmanuel1125]

Pretty good looking to be honest. I was skeptical at first but you guys did a good job.

[@rickeydowdy9669]

About how many gallons did you use.. or bottles?

[@agustinrojas3542]

I'm enjoying the videos. The vehicles are getting an awesome facelift. I would like to see the owner's reaction when the pick up their rides.

[@alfredlearlyjr1780]

you've given me a idea for my rims here in Philippines.

[@johnnybotello4304]

Wow you guys left this one freaking awesome

[@paulrios44]

How many bottle of the raptor liner did it take to paint it?

[@jammy93981]

Awesome job guys!

[@wingandhog]

Are you guys still doing raptor paint jobs? I haven’t seen a new video in nearly a year. It would be a shame if you weren’t. These young guys are so talented.

[@immelting9834]

Amazing !

[@mehohernandez]

Can you be more specific on the type of sander you use, the grit paper, the type of fiberglass product you use, how much, when you paint, how many inches away you spray from?

[@Farmor4x4]

Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque?

[@josesmith6246]

great JOB!!!!!!!

[@davidparker4501]

I wouldn't paid outside at night.The bugs just love those lights!

[@veraththy8242]

Keep the sander flat

[@jsjssnsns]

How many bottles did it take to do that yukon?

[@joshuamartin7443]

Why not cut out the rust and put a patch in?

[@joshuamartin7443]

No but I’m far from a pro and guess what, I had a hole in my roof of my car and I sure cut it out, welded in a patch and fixed it the right way. If you going to do work and charge people to do repairs why do it wrong. It’s one thing if you don’t know better but using the reasons of I don’t have the tools or anything like that means you shouldn’t be doing repairs

[@sirronbailey3109]

Looks great!!!

[@omarramirez2335]

Just take the emblems off and regule them later it takes more time not blowing it apart and going around by hand than taking stuff off

[@onetouchgarage4503]

Omar Ramirez doubt it would stick back on raptor,liner tho

[@thebro5540]

How much do you charge for a truck that size?

[@OfficerChungus]

Wow, great job fellas. I like you, good honest hard working young men. I wish you lived around me, I would have you do my Tahoe.

[@JoesBusBarn]

Ospho works well too. Local auto parts will have it

[@cepl2009]

How many bottles Did you spend on this job?

[@victorcantu8257]

How long will the raptor last? I’m interested I have a 1500 chevy

[@jeremytong4284]

how far can u turn ?? looks like its gonna scrap the front bumper

[@DeathByNature23]

How many bottles were used to paint this gmc?

[@williamfarmer9896]

you both did an amazing job.. I would def pay yall to do my yukon.. I subscribed to your channel

[@wanyhidalgo8947]

how many quarters to paint the whole truck?

[@S_man89]

That’s a banging job guys! I’ve been thinking of doing this to my 02 f350 most of my clear coat is peeling so it looks terrible.

[@rickys3926]

Love the white!

[@RaptorPaintJobsRGV]

Hey Ricky, thanks for the compliment brother, the white does look nice 👍🏻 We are starting on a burgundy and black Jeep today, will be posting a new vid soon brother 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@ivans6.2ss20]

Was the intake box part of the paint job? Just asking

[@jossa942]

Im diggin the channel keep up the good production. Safety is key buy some mask like robles says

[@jeremywilds3384]

Looking good.. How much u guys charging to Raptor, no patch, just sand and spray..

[@RaptorPaintJobsRGV]

Hey Jeremy, it depends what vehicle you got brother, what do you have?

[@jeremywilds3384]

@@RaptorPaintJobsRGV just wondering, what is average.. Around about how much say the suv u just did, not counting the body work u did, just if u had to sand and spray

[@RaptorPaintJobsRGV]

We could do it for 650.00 including the raptor brother 👍🏻👍🏻👍🏻👍🏻

[@TH3W0WFACT0R]

Hey man grey content! Do you etch prime before lining bare metal or is it fine? Also what size compressor do you recommend for just a one time use for raptor lining? You can always wait for it too catch up as long as it is quicker than the 60 minute hardening window right? Just trying to figure out if I’m prepared to sprat mine now that I’ve pretty much finished prepping for it! Great videos keep them coming

[@RaptorPaintJobsRGV]

Hey brother thanks for subscribing and yes!! Definitely use etch primer on bare metal. We use a 30 gal compressor at 100psi and it works great without any delays, but yes you can give it breaks if your using a smaller one just keep an eye on your texture consistency due to loss of air pressure and you should be fine 👍🏻 RAPTOR ON BROTHER!!!!! 👍🏻👍🏻👍🏻👍🏻

[@senditjustin8325]

How many liters it take to do the whole thing

[@urbanfox9564]

You all do real bad a$$ jobs, awesome!!!👍

[@YAboyboyGO707]

Wait why wouldn’t u take the emblem off?? Haha or the mirror caps. They pop off

[@Jtwinc]

Small tip for the z71 use an heat gun and gas wipe it with gas first then use the gun an then wipe it again it will come rite off the same with all the Emblems around so ya don’t have to kill yourself !!!

[@smnkm4ehfer]

Why does a yukon have z71 stickers on it? That's a chevy/tahoe thing

[@johnmiranda9592]

Is that Yukon lifted? Really like those wheels.

[@8lackRob]

How much for an f150 four door and where are you located?!

[@t.m2933]

Nice work guys. Keep up the good work.

[@RaptorPaintJobsRGV]

Thanks for the support brother!👍🏼

[@shrekwest8587]

Good job guys but you need to be wearing mask. 3M

[@lastmanstanding1767]

Great job guys 👍

[@SuperSlappy25]

looks great. good job!!

[@veritasvincit4178]

Yeah guys you gotta wear masks. Ar 500 website has them if you can find any. Like you work

[@MrMriggy11]

Looks fucking nice. Chingon!

[@shaunybarra]

What size of air hose are you using?

[@alexcisneros6278]

How many cans does it take to do a Yukon

[@pineapple_coconuts3459]

Yo how much do u guys charge !!!! That's a fantastic job yall did

[@ramonjamison373]

Really nice I have Tahoe same color what size tires are those