Yuneec Typhoon H Binding Process

[@TheGrappler2]

If you had problems getting the drone to go into binding mode - Just turn it off and then back on. Do the leaning as instructed by this video and it should go into binding mode. Thanks for this great video brother.

[@TerrestrialImaging]

Thank you for watching!

[@nebucadnezzar1945]

A really fantastic tutorial, my H just wouldn't connect the ST16 wi-fi to the bird, after following Christophers video, it is now all sorted, many many thanks.

[@TerrestrialImaging]

glad I could help!

[@edritchie9786]

This was helpful! I learned how to bind my craft with the Wizard but then it wouldn't connect with my ST16. This gave me control back again! Thank You!

[@TerrestrialImaging]

Thanks for watching. Im glad we could help!

[@jamiedibble5168]

Awesome video and after 3 days of trying to get it to work it finally did

[@jeffdaggs]

Thank you so much you saved my life. After my update last night it didn't work any more. Thanks great video!!

[@RCTanksTrucks247]

Excellent video Chris! Very informative and easy to follow.

[@TerrestrialImaging]

Thanks! I'm glad you enjoyed it.

[@HenryTen]

This was really well done for a simple production. Thanks for the clarity.

[@TerrestrialImaging]

Your welcome, glad you liked it!

[@dmarcucio]

Thank you Chris! My problem was just connection to the camera. So I took your directions and just used it to bind the camera giving it the password and it worked great!!! I now have camera action again!! Thanks again.

[@TerrestrialImaging]

Awesome, glad it worked!

[@KTHKUHNKK]

Thanks to you Chris things are coming together again as far as binding Not totally but I'm getting there. Do you have the two arm spring clips in stock for the 480 ? Keith

[@KTHKUHNKK]

This is a great video you made I remember telling your dad you look like Tom Cruise. Hey Chris I hope you guys are all doing well. We have all been through some tough times. In these crazy changing times of ours. Keith

[@TerrestrialImaging]

All is good on our end and wishing the same for you! Happy Thanksgiving!

[@ART-mv3bh]

Nothere can find this instructions , but its working , thanks .

[@nolowatt1]

Excellent explanation of the binding process. Thanks so much!

[@Canyon76]

Thanks for these thorough tips! You mentioned that the control of the H and CGO3+ are on the 2.4 GHz WiFi and the video was on the larger antennae for 5.8 GHz WiFi. I was under the impression. that the 5.8 GHz was a two way to control the camera settings. If this is not correct then why did Yuneec make the video signal WiFi? I get that WiFi is digital so they can have better quality but if it was regular RF then we could get lo get range.

[@BL4ckViP3R]

We could successfully rebind our Typhoon! Thanks to you! Muccchhhch appreciated! :)

[@thedjihobbyguygray3361]

What is the latest update on the typhoon H for the year of 2024

[@garypage2885]

Had some problems with my yuneec q500 and you helped me thanks

[@TerrestrialImaging]

Glad we could help! Thanks for watching.

[@cng-hydrographics4303]

Thank you for the great videos!!

[@TerrestrialImaging]

CNG....thank you for your feedback and for watching my videos. More coming soon. Chris

[@SF.photographer]

Good to know - could you do a similar video binding the wand to the H?

[@TerrestrialImaging]

Glad you liked it. Yes we can !

[@SF.photographer]

Thank you.

[@lostatsea99]

Good instruction, my blue flashing light never goes to yellow or white. Should there be software in the controller already in the micro-sd card?

[@mustangusa3]

Thanks for a great video. Does the wifi connection ever drop out in mid-flight? If so... is there a remedy? Thank.

[@KTHKUHNKK]

Thank you again I had to look at this video another time because as time goes on we forget things hell I'm only 72 years old now. No. Kidding Maybe perhaps I'll be buying a few parts from you if you still have any left for the typhoon h480

[@Indy69vette]

Totally worked! Thank you so much.

[@TerrestrialImaging]

Anytime!

[@jeffbrown3400]

Another great video. Very useful.

[@TerrestrialImaging]

Thanks Jeff!

[@sb4photos]

YOU ARE A CHAMPION! thanks

[@TerrestrialImaging]

Your Welcome!

[@rl2rem621]

Can an original Typhoon H be bound to the newer St16+ station or what ever it is called ?? I am told it has a better ... brighter screen ???

[@jimmylong1649]

Thank god for you!! I was nearly going to sell mine

[@TerrestrialImaging]

Glad you got it to work!

[@KurtSellsTulsa]

Great Video!

[@TerrestrialImaging]

Thank you for watching!

[@roblosie9253]

QUESTION....Did you make a copy just for this video or should one not use the original copy in case something goes wrong in the future????????????

[@StudioZweiSechs]

hello. thanks for this video. i have a problem with the moves of the cgo3+ on the h. when i want that the cam looks down or forward it doesnt react. or it reacts 1min later -.- the tilt mode ande the pan control dont work neither. i have telemetrie and the view of the cam. can you help me to solve this problem? greetings from tobi

[@jimmylong1649]

Did an update also on the st16 and typhoon and my connection time is only about 1.5 mins. Was taking 8-10 mins before

[@eyesintheskyvideography3734]

Christopher is there a way to format the SD card while it's in the CGO3+ camera? Or do you have to insert it into the ST16 to do this?Great video by the way.... Thanks.

[@TerrestrialImaging]

Thanks for the feed back! Most SD cards come already formated, however should you need to format or reformat one, it is recommended that you do it on your computer.

[@TerrestrialImaging]

keep in mind, smaller cards should be formated with either FAT or FAT32 partitions

[@eyesintheskyvideography3734]

I flew my H for the first time and did some aerial pics and videos and for some reason when I took out the SD card (that came with the H) and put in my ST16 to view the footage it said the it couldn't read it, that it needed to be formatted. So I placed the SD card in the adapter that it came with, inserted it into my PC and it was able to read it... Thanks for the response and help...

[@TerrestrialImaging]

No problem!

[@bradlybroderick990]

Does tgis help with the acquiring of the GPS. My h just keep saying acquiring GPS signal even when Imma outside. Im at a lost. Can u help?

[@cry0fth3carr0ts]

Super helpful! Thank you!

[@TerrestrialImaging]

Your Welcome!

[@ChrisNieves]

Quick question and thank you for your tutorial. After we establish connection with the craft do we delete the copy and see if we can reconnect with the original or do we stay with the copy we created and delete the original to later edit the name it's name (copy)? Or leave both there? Thanks in advance. Chris

[@TerrestrialImaging]

Do not delete the copy, i usually just stay bound to the copy, and you can rename it as you please. It wont allow you to delete the original, so just let it be.

[@ChrisNieves]

Thanks for your reply. Initially I could not connect after the updates to the craft at all hence leading me to your video. I followed your instructions which were great and regained control of the craft again. I did end up deleting the copy and now somehow it connected with the original profile again which was odd. Alls well and everything works easy peasy. Thank you for your time.

[@TerrestrialImaging]

Yeah of course, glad I could help!

[@wallyhamdan8167]

how do we test the camera if it is working or not, after a crash the camera light don't blink, the drone works fine after replacing few parts. I can't tell if the camera or the connection on the mother board broke. thanks

[@TerrestrialImaging]

Hey Wally. If you take a volt meter to the bottom of the gimbal connection board on the power and ground pins, you will be able to tell if the mainboard is giving your camera power or not. The only way to test the camera is by using the drone, unless you are good with electronics and can make an alternative way to power it on. Chances are the mainboard is bad, if your camera is not powering on.

[@wallyhamdan8167]

Thanks for your respond. I tested the connection on the typhoon H, I got 3.16 V, I am assuming the issue is the camera or its connection. Thanks for your help.

[@TerrestrialImaging]

Our pleasure. If you can not get it fixed, you can always send it to us for repair. Just fill out a repair ticket at terrestrialimaging.com/repairs

[@KTHKUHNKK]

GOOD TO KNOW CHRIS KEITH KUHN

[@TerrestrialImaging]

Glad it was useful to you.

[@perryrhodes2717]

I have a typhoon H that has a couple small problems and I cannot find anybody that will work on it. Any recommendations?

[@TerrestrialImaging]

This drone is unforunately about to hit 9 years old. Parts are no longer available from the manufacturer for repairs.

[@emmanuelfelix6755]

Please, how can I buy one from you

[@thechupacabra122]

Wait do we just delete the original one that we made a copy of and start using the new one? Or we leave both?

[@TerrestrialImaging]

You can leave it or delete it, doesn't matter. Just know which one you are using.

[@thechupacabra122]

Terrestrial Imaging LLC O ok thank you for the response. I actually ended up being able to bind the original one after creating the copy of it. So I did everything you said and made a copy and was able to bind the copy without any problems. Then I got curious and tried to see if the original one was also bind like the copy, but when I switched from the copy to the original it lost the connection and everything was reset again. So I tried going back to the copy to see if that one was bind to drone and that one was not either. So then I tried to bind the original one instead of the copy I had made, since everything was reset again, and it worked. Now my question, do you know if this will be a problem? Is there any reason why I should not go back and bind the original and use that one instead of the copy I made?

[@TerrestrialImaging]

If it is bound then it is okay to fly. Just make sure it's calibrated, and you are getting GPS signal.

[@thechupacabra122]

Terrestrial Imaging LLC Ok sounds good. Thanks a million for all the information, I really appreciate it.

[@TerrestrialImaging]

No problem! We're happy to help.

[@Juanitoabusadorcachondo]

good job chris

[@TerrestrialImaging]

Thanks !

[@Tom_Swiss]

Can i "factory reset" the channel settings on the ST16? I might have messed up the expo setting :(

[@TerrestrialImaging]

Yes there is a way to do a factory reboot, I would contact Yuneec at 844-898-6332 for instructions on Restoring it to factory settings

[@TheFunTime168]

Hi I have problem with remote control

[@josephvotta6698]

Hi - After I put the drone into "bind mode", when I go to System Settings, I do not see any camera appear. I press reset and refresh but where is the camera? How to make it appear? (so that I can press "bind"?) Thanks to any who can help.

[@TerrestrialImaging]

The camera should be blinking green. If it is not doing this, then it is not giving off a wi-fi signal.

[@lostatsea99]

my controller has 3 antennas, two whips on outside and the single small dome in the center.

[@MassimoGirini]

TI RINGRAZIO TANTISSIMO MOLTO UTILE

[@ejpjrphotography4278]

hi, should I do this before I fly for the first time?

[@TerrestrialImaging]

You shouldn't need to. If for any reason you don't have an established connection of any sorts , you should then do this before flight.

[@ejpjrphotography4278]

thanks

[@TerrestrialImaging]

+Eduardo J Padilla Jr No problem

[@spytechpr]

if i want to fly my typhoon h without camera what will i have to do?

[@spytechpr]

when i take the camera out, the typhoon h does not turn on

[@TerrestrialImaging]

You can fly perfectly fine without the camera, i have done it often. Of course you will not have any video display on your controller, but there should be no reason why the camera being off would stop you from flying.

[@spytechpr]

OK THANK YOU

[@stefanlindquist3775]

Thanx once again;))

[@KitorangPuCerita]

thanks

[@valkyrievic]

good guide...

[@henkvandijk4818]

THANKS THANKS THANKS

[@thesonie]

thanks!!!!

[@hgaldamez67]

Awesome video, save me a call to the useless Yuneec Customer service..thanks

[@exploringwithdennis1531]

Yeah the right joystick not responding to my typhoon

[@dronedays450]

Had one years ago and you could do that as many times as you like and it would still lose connection, thing was absolutely useless.

[@nigelkthomas9501]

My f🗯 drone is as much use as a barber’s shop on the steps of a guillotine! I can’t bind the camera! F🗯 useless! I want a full refund now! Had it since mid March and so far I filmed sod all! Won’t recommend this drone EVER!

[@MrJimmyz707]

Can a st16 bind to a Q500 at all?

[@ИлхомНиъматов-ц8п]

thanks