How to refill air conditioner by R22 (video 32)

How to refill air conditioner by R22

[@TheRamaseese]

Thank you so much for this vid. I installed a new AC unit about 2 months ago, but it would not blow cold or hot air. After going through youtube videos after videos and purchasing a vacuum machine along with all the bits and pieces such as cables and refrigerant (Believe me, "R32" is hard to come by in Europe!) I still could not get the Unit working. The extras I purchased didn't come cheap either and added at least another 200 euros onto the overall cost. However, after getting ready to give up with a total sad on... I came across this video and followed it step by step. (I luckily had a full bottle of R32) Best video by far. Again, thank you.

[@zana3587]

thank you sir i hope it's helpful for you

[@wedding4016]

how I know that the pipes has air .

[@Needole]

How many bar did u needed with r32

[@siewkongloo8218]

Q1u

[@ILT12345]

This will be very beneficial for us during this pandemic to DIY our AC repairs. Very good job, man.

[@zana3587]

Thank you sir

[@ravisharma5370]

nice job. thanks for painstakingly making the video and posting it online for the benefit of others.

[@zana3587]

Thank you very much sorry for the late response

[@elektroniknissanx-trailrog2641]

Are the pressure values with r32 the same ?

[@AAziztechnical]

KZbin.com/c/aaziztechnical plz visit and subscribe a aziz technical KZbin channel for HVAC and home appliances repairing video thanks ♥️

[@larrynutt1581]

@@elektroniknissanx-trailrog2641 no they are completely different and even the pressures he gave for 22 are too low, 70 psig would work better for 22.

[@godfreyjustine4029]

Thankyou nice job

[@pinaclesendas5015]

One of best AC servicing video on KZbin. You are very good at what you do. 👍👍

[@zana3587]

thank you sir

[@danielbusi]

super video bro....excellent efforts that you have put in making this wonderful and informative video....it can be understood even by a novice like me...these allegedly AC technicians are burning my pockets every summer and they don't even explain what they did but they charge money stating that they have filled the gas.....now i got a clear picture....thanks a million for such a lovely video....good luck to you...

[@zana3587]

Thank you sir, i hope it's helpful for you

[@crazycoyote1738]

Brother, your video was smarter and more helpful, with no words, than 50 videos I watched, of my American brothers, endlessly talking BS. Thank you.

[@sangitapandya7928]

Jayesh pandya Rajkot

[@crazycoyote1738]

Sangita Pandya What language is that? I couldn’t translate it on google.

[@larrynutt1581]

Well he did a shit job so I'd have to disagree

[@zana3587]

thank you

[@rabahiso-dz4424]

You made our life easy. You are honest and sincere person. Thank you so much and God bless you

[@muzsibacsikanalisa9560]

Thank you! I love that you show the point and not mystify it. Good work!

[@ozge1281]

Bu bu haftaBu y bu bu t hu,a

[@overmanonfire]

Straight to the point, thank you so very much!

[@zana3587]

thank you sir

[@nef003]

Best video ever!! Quick and easy. Thanks.

[@zana3587]

nef003 You welcome

[@rickbourdier1408]

Dahen Zana, many thanks. Thorough and very well done.

[@zana3587]

Thank you

[@frankPeralta-lx2dl]

excelente video muchas gracias por fin pude entender cómo se carga de gas el aire acondicionado saludos desde República Dominicana

[@zana3587]

bienvenido señor

[@bangladesh4298]

no,good,you,fixce

[@emmanuelmawulikoffi3223]

wonderfull training, i appreciate your teaching please ,more video about a/c conditional am biginner....GOD BLESS YOU

[@zana3587]

thank you

[@AhmedAhmed-ey2og]

Thank you very much, may God bless you, and I wish you continued health, progress and brilliance

[@zana3587]

thank you sir i hope it's helpful for you

[@lighttv3770]

Fabulous information

[@zana3587]

Thank you sir

[@ladylianmey6117]

My name is Dian Pelangi from Jakarta in Indonesia, I am a fashion designer and I want to use this media to tell everyone to be careful about getting loans on the internet, so many lenders here are fraudsters and they are here. tricking you with your hard-earned money, I applied for a loan for around Rp900,000,000 women in Malaysia and I lost around 29 million without taking a loan, I paid almost 29 million still I didn't get a loan and my business was about crashing because of debt. When I searched for a reliable private loan company, I saw another online advertisement and the name of the company was THE WORLD LOAN COMPANY. I lost 15 million with them and to this day, I have never received the loan I proposed. Dear God, my friends who applied for loans also received the loans, introducing me to a trustworthy company where Mrs. Christabel worked as a branch manager, and I applied for a loan of Rp900,000,000 and they asked for my credentials, and after that they finished verifying my details, the loan was approved for me and I thought it was just a joke, and maybe this was one of the cheats that made I lost money, but I was stunned. When I get my loan in less than 6 hours with a low interest rate of 2% without collateral I am very happy that God used my friend who contacted them and introduced me to them and because I survived making my business soar high in the air and liquidated and now my business is flying high in Indonesia and no one will say it. know about fashion companies. So I suggest all people who live in Indonesia and other countries who need loans for one purpose or another to contact christabel mother via email: [e-mail] You can also contact me at my email: ([e-mail]) and Sety introduces and talks about christabel, she also gets a new loan from christabel, you can also contact her via her email: [e-mail] Now, all who will I do is try to fulfill loan payments that I send directly to their account every month. A word for wise men is enough Thank you once again for reading my testimony, and may the Lord continue to bless us and give us a long life and a prosperous life and may God do the same good work in your life. Good mother Christabel Missan What'sApp number [phone]

[@majkl8646]

I watch your videos becouse i own same car (Kia) as you. And i find this video and i must say you are real pro. Becouse i work with AC units and the way how you can repair nearly everything and use old parts to helps you to succes is outstanding. So i wish you good luck ! Little advice, some refrigerants can be flammable and explosive so you cant always use your old compressor for make vaacum. GL

[@jankorepina207]

Hvala za čudovit prikaz.Thank you very much,great video!

[@zana3587]

hvala gospod, upam, da vam bo v pomoč

[@tonyferreira6679]

Thanks for demo,so easy so fast.

[@zana3587]

thank you sir

[@SPSIVAN-fm4zj]

very nice information thank u so much

[@zana3587]

+S.P. SIVAN welcome man

[@stillaliveinusa2499]

Thank you, Dahen. Yours is the best video for pure instruction....greatly appreciated!

[@zana3587]

Thank you there are more videos about (how to test the capacitor, how to close the air ( R22) by close the valve and more ....) soon

[@Grinnser]

Danke! genau was ich gesucht habe.

[@zana3587]

Sie sind willkommen, Sir. alle deutsch

[@kriss1313]

Very instructive.

[@zana3587]

Thank you

[@olatimehinfeyisayo5674]

I really love this

[@zana3587]

thank you

[@Pinoyphilly]

thank you for sharing your knowledge with the us... and the world. may you prosper and become more of an expert in HVAC and split aircons. I just bought a 24,000 BTU Senville and will install it myself. Be well my friend.

[@zana3587]

Thank you

[@aleks7064]

круто! ни одного слова! а всё понятно! спасибо!попробую снимать так же!

[@zana3587]

Спасибо, сэр

[@behindtheveil180]

thanks for the video. did you close back both valves after recharging and putting caps back on? missed that part. thanks again.

[@zana3587]

Thank you, you should not close both valves

[@adebimpe7432]

good observation my good engineer, because of this i watch the video 3 times , good study er

[@Thad_]

@@zana3587 meaning both valves shld remain open always?

[@zana3587]

Yes sir . Sorry for late

[@Thad_]

@@zana3587 thanks for your reply sir

[@mohdriyaz7983]

Nice vdieo

[@zana3587]

+Mohd Riyaz Thank you

[@ladderssnakes1755]

Nice video me too !

[@zana3587]

Iqbal Halani welcome

[@sajanmorya8227]

Mohd Riyaz ygcjvkm

[@hieppham8358]

hanhphuccorp.com/du-an/tai-sao-may-lanh-khong-lanh--213.html

[@LUISGHOSTS]

Thanks for venting!

[@zana3587]

Thank you

[@michaelgalvin9994]

He will get the fine sooner or later lol. I'm just puzzled with the fact he filled the unit with air rather than nitrogen... air is a non condensible and it doesnt belong in the unit. I hope I just missed something in the video.

[@larrynutt1581]

@@michaelgalvin9994 I like how he purged the hose then turned off the gas before tightening the hose completely negating the purge

[@joeyysossa4144]

Exellent teaching I just followed yr Instructions and reload refrigerant r22 to my minisplit unit thanks...

[@zana3587]

thank you sir

[@joeyysossa4144]

@@zana3587 Amigo como ago barrido de mangueras de manometros nesesito revisar presion de gas minisplit R410a inverter

[@Gravitin0]

why didn't you vacuum the middle (yellow) pipe also? if you did, you didn't have to purge it with gas. Vacuming does a better job and its also not eco unfriendly. At the end, why didn't you first close the valve with the allen wrench before unscrewing the blue pipe, so no gas would go out.. I am still learning so I want to know the right way to do this..

[@zana3587]

+Ivan Rimac Thank you Good question Answer first question The yellow tube i vacuum it at 1:30 to 3:15, but when i disconnect the yellow tube from the compressor, and connected to bottle that it refill the air again

[@zana3587]

+Ivan Rimac For the second question i close the valve or not the freon came out because when i close the valve it cut between the yellow tube and the outdoor unet.not cut the way between the indoor unet and the yellow so its useless to close it

[@derickkruger5680]

​@@zana3587 this answer doesnt make sense sir, please explain better how the valves work.

[@TheSarojnaik]

Hi, I really like your video. I do have some doubts, if you able to help me with the same it will more helpful for me. 1) Is it necessary to put the gas cylinder upside-down while charging the gas? 2) I do have 1.5 ton LG window ac and the amp reading is like started with10-12 and goes upto 20-22. To cross-check I have changed the capacitor but it still the same. The amp mentioned in my ac is 8.5. I just wanted to know that is it okay or there is any kind of fault? 3) The ac is not dripping water. I mean the pressure is 64. It creates the cooling effect but not upto the point. It make water a bit in the condenser coil but not dripping. At the same place there is another ac which is dripping water like hell... I am waiting for your reply and thanks in advance.

[@zana3587]

Well I will try to help you step by step

[@zana3587]

First do not put it upside-down

[@zana3587]

all air conditioner (indoor or outdoor) written on sticker (run amp and start amp)

[@zana3587]

What is the value of the capacitor you set ?

[@zana3587]

did you say 65 psi in your air conditioner ?

[@sergeizharinov9700]

Спасибо, ты лучший коротко и всё понятно. Thanks a lot. You best, GOOD JOB. Russia.

[@zana3587]

Спасибо, сэр

[@HariKumar-om6ek]

Perfect and professional way of work as well as well explained.... Hats off brother

[@zana3587]

Thank you sir

[@larrynutt1581]

More like half assed and amateur, I'd fire a tech if they did this

[@klausschumacher7126]

​@@larrynutt1581 you want to make it complicated that people ask you to do it for big money....

[@larrynutt1581]

@@klausschumacher7126 it has to be complicated because that's the law

[@rinkurajput8868]

Nice video

[@zana3587]

Rinku RAJPUT Thank you

[@oveskhan3517]

Nice

[@zana3587]

Thank you

[@shakeensamayiyi6111]

Hi sir Awesome video,very clear and easy to understand,keep doing these videos as it helps all of us. From south africa

[@zana3587]

thank you sir i hope it's helpful for you, great to south africa

[@DaiPheo]

*Hi, I'm from Vietnam, I also work in refrigeration, I'm happy to get to know you and everyone, wish you and everyone always luck and success*

[@zana3587]

Thank you sir

[@iraqresitance9663]

Are you online

[@jubara195]

You said to find the leak you should charging the system with air until 460 PSI. This is very excessive pressure and could destroy the system.

[@zana3587]

I did not have another solution. Because it was a very small leak and I could not find it. But when arrived 460 psi . i saw bubbles

[@mikemc8495]

200 max with nitrogen it's basic stuff

[@mikemc8495]

You also probably a didn't see the leak because you caused it a 460 psi

[@jarrodtaylor1907]

You are wrong

[@armandouy3618]

Not air..nitrogen is the right gas, which recommended to use when performing refrigerant leak test.

[@arnelangeles4718]

Interesting, when the unit is in low in refrigerant in winter time. But dunno the technical side of it when removing the valve wires on the caps. Further details perhaps? Thanks!

[@zana3587]

+Arnel Angeles When the valves wire is removed on the capasitor in this case, the cycle of the Freon (R22) is reversed, and the hot air becomes cold. The result is that the tube that is connected with the gage is converted from push to pull and thus you can withdraw the freon (R22) from the bottle .welcome

[@arnelangeles4718]

dahen zana I can see your logic behind it in blowing hot to cold.

[@zana3587]

Sorry for the delay in the answer - in the winter can not run the air conditioner in the cool mode because the compressor not start in the cool mode

[@davidrobinson9275]

Great very informative video.

[@zana3587]

thank you sir . sorry for late

[@TodoFrigorista]

Saludos de TodoFrigorista 👍 Argentina

[@joeyysossa4144]

Do the valves where you removed the knuts from stay open even when you were done with the rifrigerent refill??

[@zana3587]

yes sir

[@willymariano9816]

yes u have to keep that open so refrigerant can cycle

[@ranajitbhunia6584]

nice

[@zana3587]

Ranajit Bhunia Thank you

[@cookieboi4449]

Excellent video and description. I have a 1998 Mitsubishi split system 2.5 kw,, it is now 22 years old and still working,,, I have shifted the unit a few times, and lost some R22. My 5 kg bottle is empty and I cannot purchase more R22 because I am not licensed. All cooking gas in Aus is pure propane, so what I have done: purged the lives with propane, tightened the connection and the job done in 5 minutes. The amount op propane which escapes is less than opening for the gas cooking stove before igniting also same for my gas hot water system. I am about to install an new 2.5 kw split system with the new gas R32 which is compatible with R290 which I believe is pure propane (though I am not 100 % sure about that), but it is propane nonetheless, and I will use same procedure. I have pump and gauges,,, but why bother, purge the lines with propane.

[@zana3587]

thank you sir

[@Skipper-hl4kx]

R32 is most definitely NOT compatible with propane. R290 is propane R32 is difluoromethane Not even close to similar, or compatible

[@jollyscaria1922]

Vry good

[@ritaoraodndndbe3419]

Thats excactly what i need, THX a lot...👍

[@superpooper_2030]

Can you make one R32?

[@zana3587]

maybe in the future

[@reynaldoantonio1264]

You dont depend for charging freon 55 or 60 you should check first the running fullload amps of your compressor, not only for charging freon you must balance the charging and amps to proper charging to save any fault

[@zana3587]

You can not depend on an amp because the compressor and other compressor are different, especially the bad-made compressor need more amp

[@goodvibes-langtayo]

inverter almost connot detect the amper

[@samalamigtv6551]

Of all my years in installing/repairing AC units, I didn't have any issues or back-jobs in constantly charging 60psi for R22. And most of those process, I didn't even use AmpMeter. So, this video is 100% reliable for any R22 AC Units!

[@metoo2900]

This very nice continue thank you for that

[@zana3587]

thank you

[@julietquebec7553]

Hi, you did a very informative video for such a DIY process. I want to make my own pressure and vacuum motor as what you did using the refrigerator motor. 1) is there any specific capacity for that motor to use to pressurize and vacuum my 2 tons split AC? 2) I saw the motor has "T" handle on the top. Did you weld it as it is or you separated the tank first since I also noticed that there is welding around the middle of the tank motor. Thanks buddy.

[@zana3587]

Thank you and sorry for late- for first question the motors name is (Danfus) from Denmark and about the capacity i am not sure and for second question yes i welding the (T) hand without open the compresor

[@karunakaranparamasivam7393]

Bsbsvxv

[@MdIrfan-ph5bc]

Thank you sar

[@zana3587]

thank you

[@eng.wissam4836]

the gas r22 must be revers when you charge it

[@zana3587]

You mean the bottle?

[@ellectronicmp]

@@zana3587 yes

[@abdulsakur5821]

@@zana3587 ...

[@salmanalfarisi8597]

Why should it be in reverse position?

[@meow2148]

No need. It is a single component refrigerant "Chlorodifluoromethane" and not a blend. You only need to invert the tank if the refrigerant is a blend (ie, mixture of 2 or more gases such as R410). All R400 & R500 series refrigerants are blends.

[@joseorta9928]

Great video....it has helped me alot...thanks

[@zana3587]

Thank you sir

[@chrisschmidt8182]

Verry good and informative with out all the talk talk talk Thanks Chris Schmidt

[@zana3587]

Thank you sir

[@dineshkumarchaurasia1596]

Very.sir.

[@zana3587]

thank you

[@karthickrk6320]

sir I having 1ton split AC. the gas level is 35psi . & also ice is forming in indoor copper tubes through small copper tube from outdoor . 1) can u analyse the problem. 2) technician said that he need to full whole gas up to 65psi(R-22). before that remaining 35psi(R-22) gas will be vacuumed completely is the process is correct ? 3) or we can able to top-up gas from 35 to 65 psi? 4) is there any chance to having hole in condenser coil . because I having aluminum condenser coil. or it will be minor valve joint leakage.? 5) because at last I not lose the hole gas nearly 50% gas there. Plz Reply me fast it will be helpful....

[@zana3587]

Well I will try to help you but step by step 1. You said there 35 psi and this means that there is a leakage of gas and easy recovery. Find a spot of oil that is blocked from Split. And when it is found, the leak will be inside this spot

[@zana3587]

After repairing the hole, vacuum the air as you did in the video

[@zana3587]

Can you explain more 4. I did not understand?

[@karthickrk6320]

sir can i topup the gas level or I should completely vacuum out & refill?

[@karthickrk6320]

4) I typed as that there is any chance leakage in joints & valves?

[@gradimirpejic9085]

BRAVO, regards and THANK YOU

[@zana3587]

Thank you sir

[@ismailismz9838]

Thank you for sharing,I hope this video can give me a bit knowledge as benefits.

[@user-lr1dv6jg4v]

Set vacum is wrong.must do by special set vacum

[@zana3587]

What is the wrong?!

[@larrynutt1581]

@@zana3587 a lot is wrong with how this was done

[@saeedbakhtiear114]

Don't you have to close the valves?

[@zana3587]

Thank you sir, and sorry for late. No sir

[@ellectronicmp]

Why not?

[@zana3587]

If you close the valve, you close the system gas

[@edward1394able]

@@zana3587 , then how it is that the gas doesn't goes out if you did not close on the charging side valve, unless you got schrader valve installed in it.

[@derickkruger5680]

​@@edward1394ablemy question exactly. Did you get an answer?

[@claystone7729]

Good video thank you.

[@zana3587]

Thank you sir

[@shkevinwang]

Best video for mini split refill!

[@zana3587]

thank you

[@hairulsaleh3508]

ok

[@zana3587]

ok

[@tg-ew8dd]

AC compressor use it as a vacuum pump we used to use them to blow up bike tires back in the old days

[@zana3587]

Good work

[@haisridhar10]

good information for beginners and still required demo bith more technical details and sequence...Thank you

[@zana3587]

+Sridhar K welcome

[@sammy-pp1gl]

Hi I have seen many videos of how to service air out door unit and could not catch upwith any ,but your clip can turn a zero to hero , Thanks i leanrt a lot from this .hope to see more clips on fridge service .. tks friend

[@zana3587]

Thank you . There is more to come

[@sammy-pp1gl]

Hi Dahen Zana , thanks for the swift reply , Do you have notes about the aircon servicing .

[@zana3587]

welcome . I have another video about test air conditioner capacitor

[@rajarajaa2148]

Very nice bro . Explaining to your moument

[@Columbariusify]

Now I understand. Guy who works and not talks

[@riverfishing818]

This one of the best videos i have come across thank you keep it up. But i heard you have to turn the cylinder upside down when you are charging

[@zana3587]

thank you sir, you have not to turn the cylinder upside down

[@LivingInWild]

At 0:20 seconds you opened some sort of valves with allen ranch. Do we always open these valves before charging refrigerant through the service valve? And don’t you have to close the valves with allen ranch after charging?

[@tarnfors]

It's awesome. Thank you bro.

[@zana3587]

thank you sir

[@AAziztechnical]

KZbin.com/c/aaziztechnical plz visit and subscribe a aziz technical KZbin channel for HVAC and home appliances repairing video thanks ♥️

[@pramodmore918]

What is the proper suction pressure of R32 1.5 ton unit?

[@mazarat4768]

You must give the gas with scales. The pressure can fool you. The pressure varies according to the air temperature. Greetings from Turkey 🇹🇷

[@mazarat4768]

Beğenin la

[@zana3587]

Thank you for your information

[@karanarjunyadav9518]

Ok...But You Are Hide Many More Main Steps...Any How. Gud Job☺️

[@wasimedoo7994]

Nice job keep it up God bless

[@zana3587]

thank you sir

[@samcorlsamuel9074]

Was the valve turned off with the allen keys , feel like i missed that part

[@paawittykoncept5074]

Yes

[@manzoorelahi7432]

Nice video zindabad thanks for your help

[@zana3587]

Zindabad!

[@hieppham8358]

hanhphuccorp.com/du-an/tai-sao-may-lanh-khong-lanh--213.html

[@araujo86silva84]

Ola amigo qual e o compresso que vc usa para fazer o vacua deste agradeco

[@kidsfunthings]

thanks a lot very useful .

[@zana3587]

Thank you

[@hawrejabar8057]

great job das xosh bet sarkawtw bit

[@zana3587]

sopast dakam . bbura ka taxer walamm dawa

[@chwaqasvlog1863]

Zabardast

[@kamalsharma5873]

10/10 video grt work 👍

[@zana3587]

Thank you sir

[@blardymunggas6884]

Best Air conditioner video on youtube. I watch many to learn but this is by far the best for noobs like me than plans to do some DIY ac work

[@zana3587]

thank you sir i hope it's helpful for you

[@aminenaifar4493]

thank you so much brother

[@zana3587]

you welcome sir

[@bosst7838]

Straight to the point useful video

[@zana3587]

thank you

[@amirfirdaus5518]

Compressor oil need to be refill or not after vacuum?

[@ZelimirSkrbic]

Great video, nice showing big greetings

[@zana3587]

thank you sir . sorry for late

[@nzizimusula1416]

gostei muito do voço trabalho quero aprender mais

[@zana3587]

Obrigado, eu vou tentar

[@Goodfuture15]

Very clear. From Philippines

[@zana3587]

thank you sir

[@abdulmatheen106]

Good video . good detail and also showing the leak fault good teacher thank you 😊

[@zana3587]

thank you sir i hope it's helpful for you

[@jctoo9756]

After recharging r22 to the correct psi, I removed the hose from low suction nipple. Many times there's oil dripping from the hose. Is this normal?

[@vijendrakumarsarnaydo8584]

Good Sir Ji

[@zana3587]

Thank you

[@waltsteinchen]

Would the work flow or measurements be different using R32 instead of R22 ?

[@erickvasqu8691]

🙂👍 excelente video

[@zana3587]

gracias Señor

[@desiefiautoelectrician7150]

wow That's why I wanted you to be so good. Not everyone can think like you. Step by step, I have accepted you as a teacher.

[@zana3587]

thank you sir

[@dansto847]

Wow - you are the man, thank you a lot - easy, specific, pragmatic - the way I like!

[@wrenceverano1054]

Good job!

[@zana3587]

Thank you sir

[@walterkersting9922]

Nice vacuum pump!

[@user-hc2rm2et6y]

Thanks a lot ♥️

[@zana3587]

thank you sir

[@mabs9503]

Is that a custom vacuum/pressure pump made from a refrigerator motor? That's pretty hardcore.

[@zana3587]

Thank you sir, and sorry for late. Yes sir

[@larrynutt1581]

It probably doesn't work very well as a vacuum pump for this application.

[@shayanahmed2146]

That's knowledgeable! Have you close the valve when removing blue house, plz tell us?

[@derickkruger5680]

My question exactly withiut a proper answer. 😢

[@mujahidmomin5563]

Vy nice sir ji

[@zana3587]

Thank you sir

[@BlueSky-cy5nw]

Excellent and to the point video

[@zana3587]

thank you sir